[PATCH] e1000: Fix adapter structure and prepare for multique fix
Fix adapter structure to handle multiple queues and prepping the driver for full multiple queue support, some changes are ifdef'd our unless you define CONFIG_E1000_MQ.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 4dd1326..5940f7a 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -268,6 +268,7 @@
#ifdef CONFIG_E1000_MQ
struct e1000_tx_ring **cpu_tx_ring; /* per-cpu */
#endif
+ unsigned long tx_queue_len;
uint32_t txd_cmd;
uint32_t tx_int_delay;
uint32_t tx_abs_int_delay;
@@ -303,7 +304,8 @@
struct call_async_data_struct rx_sched_call_data;
int cpu_for_queue[4];
#endif
- int num_queues;
+ int num_tx_queues;
+ int num_rx_queues;
uint64_t hw_csum_err;
uint64_t hw_csum_good;
@@ -336,6 +338,7 @@
struct e1000_rx_ring test_rx_ring;
+ u32 *config_space;
int msg_enable;
#ifdef CONFIG_PCI_MSI
boolean_t have_msi;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 54ae880..fa9a465 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -614,8 +614,8 @@
struct e1000_rx_ring *rxdr, *rx_old, *rx_new;
int i, err, tx_ring_size, rx_ring_size;
- tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
- rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
+ tx_ring_size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
+ rx_ring_size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
if (netif_running(adapter->netdev))
e1000_down(adapter);
@@ -654,10 +654,10 @@
E1000_MAX_TXD : E1000_MAX_82544_TXD));
E1000_ROUNDUP(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
rxdr[i].count = rxdr->count;
- }
if(netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index 7caa357..1ddfd56 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1497,6 +1497,7 @@
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 5f848b3..540c856 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -411,8 +411,9 @@
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
e1000_configure_rx(adapter);
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++) {
adapter->alloc_rx_buf(adapter, &adapter->rx_ring[i]);
+ }
#ifdef CONFIG_PCI_MSI
if(adapter->hw.mac_type > e1000_82547_rev_2) {
@@ -867,7 +868,7 @@
unregister_netdev(netdev);
#ifdef CONFIG_E1000_NAPI
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
__dev_put(&adapter->polling_netdev[i]);
#endif
@@ -972,15 +973,25 @@
switch (hw->mac_type) {
case e1000_82571:
case e1000_82572:
- adapter->num_queues = 2;
+ /* These controllers support 2 tx queues, but with a single
+ * qdisc implementation, multiple tx queues aren't quite as
+ * interesting. If we can find a logical way of mapping
+ * flows to a queue, then perhaps we can up the num_tx_queue
+ * count back to its default. Until then, we run the risk of
+ * terrible performance due to SACK overload. */
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 2;
break;
default:
- adapter->num_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
break;
}
- adapter->num_queues = min(adapter->num_queues, num_online_cpus());
+ adapter->num_rx_queues = min(adapter->num_rx_queues, num_online_cpus());
+ adapter->num_tx_queues = min(adapter->num_tx_queues, num_online_cpus());
#else
- adapter->num_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
#endif
if (e1000_alloc_queues(adapter)) {
@@ -989,7 +1000,7 @@
}
#ifdef CONFIG_E1000_NAPI
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
adapter->polling_netdev[i].priv = adapter;
adapter->polling_netdev[i].poll = &e1000_clean;
adapter->polling_netdev[i].weight = 64;
@@ -1022,13 +1033,13 @@
{
int size;
- size = sizeof(struct e1000_tx_ring) * adapter->num_queues;
+ size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
adapter->tx_ring = kmalloc(size, GFP_KERNEL);
if (!adapter->tx_ring)
return -ENOMEM;
memset(adapter->tx_ring, 0, size);
- size = sizeof(struct e1000_rx_ring) * adapter->num_queues;
+ size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
adapter->rx_ring = kmalloc(size, GFP_KERNEL);
if (!adapter->rx_ring) {
kfree(adapter->tx_ring);
@@ -1037,7 +1048,7 @@
memset(adapter->rx_ring, 0, size);
#ifdef CONFIG_E1000_NAPI
- size = sizeof(struct net_device) * adapter->num_queues;
+ size = sizeof(struct net_device) * adapter->num_rx_queues;
adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
if (!adapter->polling_netdev) {
kfree(adapter->tx_ring);
@@ -1066,12 +1077,12 @@
lock_cpu_hotplug();
i = 0;
for_each_online_cpu(cpu) {
- *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues];
+ *per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_tx_queues];
/* This is incomplete because we'd like to assign separate
* physical cpus to these netdev polling structures and
* avoid saturating a subset of cpus.
*/
- if (i < adapter->num_queues) {
+ if (i < adapter->num_rx_queues) {
*per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i];
adapter->cpu_for_queue[i] = cpu;
} else
@@ -1291,7 +1302,7 @@
{
int i, err = 0;
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
if (err) {
DPRINTK(PROBE, ERR,
@@ -1319,7 +1330,7 @@
/* Setup the HW Tx Head and Tail descriptor pointers */
- switch (adapter->num_queues) {
+ switch (adapter->num_tx_queues) {
case 2:
tdba = adapter->tx_ring[1].dma;
tdlen = adapter->tx_ring[1].count *
@@ -1537,7 +1548,7 @@
{
int i, err = 0;
- for (i = 0; i < adapter->num_queues; i++) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
if (err) {
DPRINTK(PROBE, ERR,
@@ -1709,7 +1720,7 @@
/* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring */
- switch (adapter->num_queues) {
+ switch (adapter->num_rx_queues) {
#ifdef CONFIG_E1000_MQ
case 2:
rdba = adapter->rx_ring[1].dma;
@@ -1736,7 +1747,7 @@
}
#ifdef CONFIG_E1000_MQ
- if (adapter->num_queues > 1) {
+ if (adapter->num_rx_queues > 1) {
uint32_t random[10];
get_random_bytes(&random[0], 40);
@@ -1746,7 +1757,7 @@
E1000_WRITE_REG(hw, RSSIM, 0);
}
- switch (adapter->num_queues) {
+ switch (adapter->num_rx_queues) {
case 2:
default:
reta = 0x00800080;
@@ -1838,7 +1849,7 @@
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
}
@@ -1905,7 +1916,7 @@
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
}
@@ -1949,7 +1960,7 @@
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
}
@@ -2025,7 +2036,7 @@
{
int i;
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
}
@@ -2325,7 +2336,10 @@
e1000_update_adaptive(&adapter->hw);
- if (adapter->num_queues == 1 && !netif_carrier_ok(netdev)) {
+#ifdef CONFIG_E1000_MQ
+ txdr = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
+#endif
+ if (!netif_carrier_ok(netdev)) {
if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
/* We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
@@ -3197,14 +3211,12 @@
E1000_WRITE_FLUSH(hw);
#ifdef CONFIG_E1000_MQ
if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
- cpu_set(adapter->cpu_for_queue[0],
- adapter->rx_sched_call_data.cpumask);
- for (i = 1; i < adapter->num_queues; i++) {
- cpu_set(adapter->cpu_for_queue[i],
- adapter->rx_sched_call_data.cpumask);
- atomic_inc(&adapter->irq_sem);
- }
- atomic_set(&adapter->rx_sched_call_data.count, i);
+ /* We must setup the cpumask once count == 0 since
+ * each cpu bit is cleared when the work is done. */
+ adapter->rx_sched_call_data.cpumask = adapter->cpumask;
+ atomic_add(adapter->num_rx_queues - 1, &adapter->irq_sem);
+ atomic_set(&adapter->rx_sched_call_data.count,
+ adapter->num_rx_queues);
smp_call_async_mask(&adapter->rx_sched_call_data);
} else {
printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count));
@@ -3267,7 +3279,7 @@
while (poll_dev != &adapter->polling_netdev[i]) {
i++;
- if (unlikely(i == adapter->num_queues))
+ if (unlikely(i == adapter->num_rx_queues))
BUG();
}
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 852841f..b0be7d6 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -320,7 +320,7 @@
} else {
tx_ring->count = opt.def;
}
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_tx_queues; i++)
tx_ring[i].count = tx_ring->count;
}
{ /* Receive Descriptor Count */
@@ -346,7 +346,7 @@
} else {
rx_ring->count = opt.def;
}
- for (i = 0; i < adapter->num_queues; i++)
+ for (i = 0; i < adapter->num_rx_queues; i++)
rx_ring[i].count = rx_ring->count;
}
{ /* Checksum Offload Enable/Disable */
