ath9k: fix per-packet tx power configuration
Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been
overwritten by setup_frame_info() and it will result in a corrupted tx power
configuration. Set per-packet tx power in setup_frame_info() according to
current vif tx power.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 0acd079..3ad79bb 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1103,28 +1103,14 @@
struct sk_buff *skb;
struct ath_frame_info *fi;
struct ieee80211_tx_info *info;
- struct ieee80211_vif *vif;
struct ath_hw *ah = sc->sc_ah;
if (sc->tx99_state || !ah->tpc_enabled)
return MAX_RATE_POWER;
skb = bf->bf_mpdu;
- info = IEEE80211_SKB_CB(skb);
- vif = info->control.vif;
-
- if (!vif) {
- max_power = sc->cur_chan->cur_txpower;
- goto out;
- }
-
- if (vif->bss_conf.txpower_type != NL80211_TX_POWER_LIMITED) {
- max_power = min_t(u8, sc->cur_chan->cur_txpower,
- 2 * vif->bss_conf.txpower);
- goto out;
- }
-
fi = get_frame_info(skb);
+ info = IEEE80211_SKB_CB(skb);
if (!AR_SREV_9300_20_OR_LATER(ah)) {
int txpower = fi->tx_power;
@@ -1161,25 +1147,26 @@
txpower -= 2;
txpower = max(txpower, 0);
- max_power = min_t(u8, ah->tx_power[rateidx],
- 2 * vif->bss_conf.txpower);
- max_power = min_t(u8, max_power, txpower);
+ max_power = min_t(u8, ah->tx_power[rateidx], txpower);
+
+ /* XXX: clamp minimum TX power at 1 for AR9160 since if
+ * max_power is set to 0, frames are transmitted at max
+ * TX power
+ */
+ if (!max_power && !AR_SREV_9280_20_OR_LATER(ah))
+ max_power = 1;
} else if (!bf->bf_state.bfs_paprd) {
if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC))
max_power = min_t(u8, ah->tx_power_stbc[rateidx],
- 2 * vif->bss_conf.txpower);
+ fi->tx_power);
else
max_power = min_t(u8, ah->tx_power[rateidx],
- 2 * vif->bss_conf.txpower);
- max_power = min(max_power, fi->tx_power);
+ fi->tx_power);
} else {
max_power = ah->paprd_training_power;
}
-out:
- /* XXX: clamp minimum TX power at 1 for AR9160 since if max_power
- * is set to 0, frames are transmitted at max TX power
- */
- return (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) ? 1 : max_power;
+
+ return max_power;
}
static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf,
@@ -2129,6 +2116,7 @@
struct ath_node *an = NULL;
enum ath9k_key_type keytype;
bool short_preamble = false;
+ u8 txpower;
/*
* We check if Short Preamble is needed for the CTS rate by
@@ -2145,6 +2133,16 @@
if (sta)
an = (struct ath_node *) sta->drv_priv;
+ if (tx_info->control.vif) {
+ struct ieee80211_vif *vif = tx_info->control.vif;
+
+ txpower = 2 * vif->bss_conf.txpower;
+ } else {
+ struct ath_softc *sc = hw->priv;
+
+ txpower = sc->cur_chan->cur_txpower;
+ }
+
memset(fi, 0, sizeof(*fi));
fi->txq = -1;
if (hw_key)
@@ -2155,7 +2153,7 @@
fi->keyix = ATH9K_TXKEYIX_INVALID;
fi->keytype = keytype;
fi->framelen = framelen;
- fi->tx_power = MAX_RATE_POWER;
+ fi->tx_power = txpower;
if (!rate)
return;
