crypto: inside-secure - add support for using the EIP197 without vendor firmware
Until now, the inside-secure driver required a set of firmware images
supplied by the silicon vendor, typically under NDA, to be present in
/lib/firmware/inside-secure in order to be able to function.
This patch removes the dependence on this official vendor firmware by
falling back to generic "mini" FW - developed specifically for this
driver - that can be provided under GPL 2.0 through linux-firmwares.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/drivers/crypto/inside-secure/safexcel.h b/drivers/crypto/inside-secure/safexcel.h
index 2db2a96..33e5f66 100644
--- a/drivers/crypto/inside-secure/safexcel.h
+++ b/drivers/crypto/inside-secure/safexcel.h
@@ -136,8 +136,10 @@
#define EIP197_PE_IN_TBUF_THRES(n) (0x0100 + (0x2000 * (n)))
#define EIP197_PE_ICE_SCRATCH_RAM(n) (0x0800 + (0x2000 * (n)))
#define EIP197_PE_ICE_PUE_CTRL(n) (0x0c80 + (0x2000 * (n)))
+#define EIP197_PE_ICE_PUTF_CTRL(n) (0x0d00 + (0x2000 * (n)))
#define EIP197_PE_ICE_SCRATCH_CTRL(n) (0x0d04 + (0x2000 * (n)))
#define EIP197_PE_ICE_FPP_CTRL(n) (0x0d80 + (0x2000 * (n)))
+#define EIP197_PE_ICE_PPTF_CTRL(n) (0x0e00 + (0x2000 * (n)))
#define EIP197_PE_ICE_RAM_CTRL(n) (0x0ff0 + (0x2000 * (n)))
#define EIP197_PE_EIP96_TOKEN_CTRL(n) (0x1000 + (0x2000 * (n)))
#define EIP197_PE_EIP96_FUNCTION_EN(n) (0x1004 + (0x2000 * (n)))
@@ -228,6 +230,11 @@
#define EIP197_DxE_THR_CTRL_EN BIT(30)
#define EIP197_DxE_THR_CTRL_RESET_PE BIT(31)
+/* EIP197_PE_ICE_PUE/FPP_CTRL */
+#define EIP197_PE_ICE_UENG_START_OFFSET(n) ((n) << 16)
+#define EIP197_PE_ICE_UENG_INIT_ALIGN_MASK 0x7ff0
+#define EIP197_PE_ICE_UENG_DEBUG_RESET BIT(3)
+
/* EIP197_HIA_AIC_G_ENABLED_STAT */
#define EIP197_G_IRQ_DFE(n) BIT((n) << 1)
#define EIP197_G_IRQ_DSE(n) BIT(((n) << 1) + 1)
@@ -503,6 +510,11 @@ struct safexcel_command_desc {
* Internal structures & functions
*/
+#define EIP197_FW_TERMINAL_NOPS 2
+#define EIP197_FW_START_POLLCNT 16
+#define EIP197_FW_PUE_READY 0x14
+#define EIP197_FW_FPP_READY 0x18
+
enum eip197_fw {
FW_IFPP = 0,
FW_IPUE,
