iio: accel: kxcjk1013: fix INT_CTRL/INT_SRC1 bit names
Fix INT_CTRL1 bit names to match register name and add names
for INT_SRC1 bits.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 5075bb9..756f077a 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -67,14 +67,19 @@
#define KXCJK1013_REG_CTRL1_BIT_GSEL1 BIT(4)
#define KXCJK1013_REG_CTRL1_BIT_GSEL0 BIT(3)
#define KXCJK1013_REG_CTRL1_BIT_WUFE BIT(1)
-#define KXCJK1013_REG_INT_REG1_BIT_IEA BIT(4)
-#define KXCJK1013_REG_INT_REG1_BIT_IEN BIT(5)
+
+#define KXCJK1013_REG_INT_CTRL1_BIT_IEL BIT(3)
+#define KXCJK1013_REG_INT_CTRL1_BIT_IEA BIT(4)
+#define KXCJK1013_REG_INT_CTRL1_BIT_IEN BIT(5)
#define KXCJK1013_DATA_MASK_12_BIT 0x0FFF
#define KXCJK1013_MAX_STARTUP_TIME_US 100000
#define KXCJK1013_SLEEP_DELAY_MS 2000
+#define KXCJK1013_REG_INT_SRC1_BIT_WUFS BIT(1)
+#define KXCJK1013_REG_INT_SRC1_BIT_DRDY BIT(4)
+
#define KXCJK1013_REG_INT_SRC2_BIT_ZP BIT(0)
#define KXCJK1013_REG_INT_SRC2_BIT_ZN BIT(1)
#define KXCJK1013_REG_INT_SRC2_BIT_YP BIT(2)
@@ -336,9 +341,9 @@ static int kxcjk1013_chip_init(struct kxcjk1013_data *data)
}
if (data->active_high_intr)
- ret |= KXCJK1013_REG_INT_REG1_BIT_IEA;
+ ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEA;
else
- ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEA;
+ ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEA;
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
ret);
@@ -444,9 +449,9 @@ static int kxcjk1013_setup_any_motion_interrupt(struct kxcjk1013_data *data,
}
if (status)
- ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
+ ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEN;
else
- ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
+ ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN;
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
ret);
@@ -504,9 +509,9 @@ static int kxcjk1013_setup_new_data_interrupt(struct kxcjk1013_data *data,
}
if (status)
- ret |= KXCJK1013_REG_INT_REG1_BIT_IEN;
+ ret |= KXCJK1013_REG_INT_CTRL1_BIT_IEN;
else
- ret &= ~KXCJK1013_REG_INT_REG1_BIT_IEN;
+ ret &= ~KXCJK1013_REG_INT_CTRL1_BIT_IEN;
ret = i2c_smbus_write_byte_data(data->client, KXCJK1013_REG_INT_CTRL1,
ret);
@@ -1037,7 +1042,7 @@ static irqreturn_t kxcjk1013_event_handler(int irq, void *private)
goto ack_intr;
}
- if (ret & 0x02) {
+ if (ret & KXCJK1013_REG_INT_SRC1_BIT_WUFS) {
ret = i2c_smbus_read_byte_data(data->client,
KXCJK1013_REG_INT_SRC2);
if (ret < 0) {
