# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2008-2011 Freescale Semiconductor Inc.
%YAML 1.2
---
$id: http://devicetree.org/schemas/crypto/fsl,sec-v4.0.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale SEC 4

maintainers:
  - '"Horia Geantă" <horia.geanta@nxp.com>'
  - Pankaj Gupta <pankaj.gupta@nxp.com>
  - Gaurav Jain <gaurav.jain@nxp.com>

description: |
  NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator
  Accelerator and Assurance Module (CAAM).

  SEC 4 h/w can process requests from 2 types of sources.
  1. DPAA Queue Interface (HW interface between Queue Manager & SEC 4).
  2. Job Rings (HW interface between cores & SEC 4 registers).

  High Speed Data Path Configuration:

  HW interface between QM & SEC 4 and also BM & SEC 4, on DPAA-enabled parts
  such as the P4080.  The number of simultaneous dequeues the QI can make is
  equal to the number of Descriptor Controller (DECO) engines in a particular
  SEC version.  E.g., the SEC 4.0 in the P4080 has 5 DECOs and can thus
  dequeue from 5 subportals simultaneously.

  Job Ring Data Path Configuration:

  Each JR is located on a separate 4k page, they may (or may not) be made visible
  in the memory partition devoted to a particular core.  The P4080 has 4 JRs, so
  up to 4 JRs can be configured; and all 4 JRs process requests in parallel.

properties:
  compatible:
    oneOf:
      - items:
          - const: fsl,sec-v5.4
          - const: fsl,sec-v5.0
          - const: fsl,sec-v4.0
      - items:
          - enum:
              - fsl,imx6ul-caam
              - fsl,sec-v5.0
          - const: fsl,sec-v4.0
      - const: fsl,sec-v4.0

  reg:
    maxItems: 1

  ranges:
    maxItems: 1

  '#address-cells':
    enum: [1, 2]

  '#size-cells':
    enum: [1, 2]

  clocks:
    minItems: 1
    maxItems: 4

  clock-names:
    minItems: 1
    maxItems: 4
    items:
      enum: [mem, aclk, ipg, emi_slow]

  dma-coherent: true

  interrupts:
    maxItems: 1

  fsl,sec-era:
    description: Defines the 'ERA' of the SEC device.
    $ref: /schemas/types.yaml#/definitions/uint32

patternProperties:
  '^jr@[0-9a-f]+$':
    type: object
    additionalProperties: false
    description:
      Job Ring (JR) Node. Defines data processing interface to SEC 4 across the
      peripheral bus for purposes of processing cryptographic descriptors. The
      specified address range can be made visible to one (or more) cores. The
      interrupt defined for this node is controlled within the address range of
      this node.

    properties:
      compatible:
        oneOf:
          - items:
              - const: fsl,sec-v5.4-job-ring
              - const: fsl,sec-v5.0-job-ring
              - const: fsl,sec-v4.0-job-ring
          - items:
              - const: fsl,sec-v5.0-job-ring
              - const: fsl,sec-v4.0-job-ring
          - const: fsl,sec-v4.0-job-ring

      reg:
        maxItems: 1

      interrupts:
        maxItems: 1

      fsl,liodn:
        description:
          Specifies the LIODN to be used in conjunction with the ppid-to-liodn
          table that specifies the PPID to LIODN mapping. Needed if the PAMU is
          used.  Value is a 12 bit value where value is a LIODN ID for this JR.
          This property is normally set by boot firmware.
        $ref: /schemas/types.yaml#/definitions/uint32
        maximum: 0xfff

  '^rtic@[0-9a-f]+$':
    type: object
    additionalProperties: false
    description:
      Run Time Integrity Check (RTIC) Node. Defines a register space that
      contains up to 5 sets of addresses and their lengths (sizes) that will be
      checked at run time.  After an initial hash result is calculated, these
      addresses are checked by HW to monitor any change.  If any memory is
      modified, a Security Violation is triggered (see SNVS definition).

    properties:
      compatible:
        oneOf:
          - items:
              - const: fsl,sec-v5.4-rtic
              - const: fsl,sec-v5.0-rtic
              - const: fsl,sec-v4.0-rtic
          - const: fsl,sec-v4.0-rtic

      reg:
        maxItems: 1

      ranges:
        maxItems: 1

      interrupts:
        maxItems: 1

      '#address-cells':
        const: 1

      '#size-cells':
        const: 1

    patternProperties:
      '^rtic-[a-z]@[0-9a-f]+$':
        type: object
        additionalProperties: false
        description:
          Run Time Integrity Check (RTIC) Memory Node defines individual RTIC
          memory regions that are used to perform run-time integrity check of
          memory areas that should not modified. The node defines a register
          that contains the memory address & length (combined) and a second
          register that contains the hash result in big endian format.

        properties:
          compatible:
            oneOf:
              - items:
                  - const: fsl,sec-v5.4-rtic-memory
                  - const: fsl,sec-v5.0-rtic-memory
                  - const: fsl,sec-v4.0-rtic-memory
              - const: fsl,sec-v4.0-rtic-memory

          reg:
            items:
              - description: RTIC memory address
              - description: RTIC hash result

          fsl,liodn:
            description:
              Specifies the LIODN to be used in conjunction with the
              ppid-to-liodn table that specifies the PPID to LIODN mapping.
              Needed if the PAMU is used.  Value is a 12 bit value where value
              is a LIODN ID for this JR. This property is normally set by boot
              firmware.
            $ref: /schemas/types.yaml#/definitions/uint32
            maximum: 0xfff

          fsl,rtic-region:
            description:
              Specifies the HW address (36 bit address) for this region
              followed by the length of the HW partition to be checked;
              the address is represented as a 64 bit quantity followed
              by a 32 bit length.
            $ref: /schemas/types.yaml#/definitions/uint32-array

required:
  - compatible
  - reg
  - ranges

additionalProperties: false

examples:
  - |
    crypto@300000 {
        compatible = "fsl,sec-v4.0";
        #address-cells = <1>;
        #size-cells = <1>;
        reg = <0x300000 0x10000>;
        ranges = <0 0x300000 0x10000>;
        interrupts = <92 2>;

        jr@1000 {
            compatible = "fsl,sec-v4.0-job-ring";
            reg = <0x1000 0x1000>;
            interrupts = <88 2>;
        };

        jr@2000 {
            compatible = "fsl,sec-v4.0-job-ring";
            reg = <0x2000 0x1000>;
            interrupts = <89 2>;
        };

        jr@3000 {
            compatible = "fsl,sec-v4.0-job-ring";
            reg = <0x3000 0x1000>;
            interrupts = <90 2>;
        };

        jr@4000 {
            compatible = "fsl,sec-v4.0-job-ring";
            reg = <0x4000 0x1000>;
            interrupts = <91 2>;
        };

        rtic@6000 {
            compatible = "fsl,sec-v4.0-rtic";
            #address-cells = <1>;
            #size-cells = <1>;
            reg = <0x6000 0x100>;
            ranges = <0x0 0x6100 0xe00>;

            rtic-a@0 {
                compatible = "fsl,sec-v4.0-rtic-memory";
                reg = <0x00 0x20>, <0x100 0x80>;
            };

            rtic-b@20 {
                compatible = "fsl,sec-v4.0-rtic-memory";
                reg = <0x20 0x20>, <0x200 0x80>;
            };

            rtic-c@40 {
                compatible = "fsl,sec-v4.0-rtic-memory";
                reg = <0x40 0x20>, <0x300 0x80>;
            };

            rtic-d@60 {
                compatible = "fsl,sec-v4.0-rtic-memory";
                reg = <0x60 0x20>, <0x500 0x80>;
            };
        };
    };
...