| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Samsung Exynos7 SoC device tree source |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| */ |
| |
| #include <dt-bindings/clock/exynos7-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "samsung,exynos7"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| pinctrl0 = &pinctrl_alive; |
| pinctrl1 = &pinctrl_bus0; |
| pinctrl2 = &pinctrl_nfc; |
| pinctrl3 = &pinctrl_touch; |
| pinctrl4 = &pinctrl_ff; |
| pinctrl5 = &pinctrl_ese; |
| pinctrl6 = &pinctrl_fsys0; |
| pinctrl7 = &pinctrl_fsys1; |
| pinctrl8 = &pinctrl_bus1; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a57-pmu"; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, |
| <&cpu_atlas2>, <&cpu_atlas3>; |
| }; |
| |
| fin_pll: clock { |
| /* XXTI */ |
| compatible = "fixed-clock"; |
| clock-output-names = "fin_pll"; |
| #clock-cells = <0>; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu_atlas0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| i-cache-size = <0xc000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&atlas_l2>; |
| }; |
| |
| cpu_atlas1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x1>; |
| enable-method = "psci"; |
| i-cache-size = <0xc000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&atlas_l2>; |
| }; |
| |
| cpu_atlas2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x2>; |
| enable-method = "psci"; |
| i-cache-size = <0xc000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&atlas_l2>; |
| }; |
| |
| cpu_atlas3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57"; |
| reg = <0x3>; |
| enable-method = "psci"; |
| i-cache-size = <0xc000>; |
| i-cache-line-size = <64>; |
| i-cache-sets = <256>; |
| d-cache-size = <0x8000>; |
| d-cache-line-size = <64>; |
| d-cache-sets = <256>; |
| next-level-cache = <&atlas_l2>; |
| }; |
| |
| atlas_l2: l2-cache0 { |
| compatible = "cache"; |
| cache-level = <2>; |
| cache-unified; |
| cache-size = <0x200000>; |
| cache-line-size = <64>; |
| cache-sets = <2048>; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci"; |
| method = "smc"; |
| cpu_off = <0x84000002>; |
| cpu_on = <0xc4000003>; |
| }; |
| |
| soc: soc@0 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x18000000>; |
| |
| chipid@10000000 { |
| compatible = "samsung,exynos7-chipid", |
| "samsung,exynos4210-chipid"; |
| reg = <0x10000000 0x100>; |
| }; |
| |
| gic: interrupt-controller@11001000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x11001000 0x1000>, |
| <0x11002000 0x2000>, |
| <0x11004000 0x2000>, |
| <0x11006000 0x2000>; |
| }; |
| |
| pdma0: dma-controller@10e10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10e10000 0x1000>; |
| interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_fsys0 ACLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| pdma1: dma-controller@10eb0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10eb0000 0x1000>; |
| interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_fsys0 ACLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| |
| clock_topc: clock-controller@10570000 { |
| compatible = "samsung,exynos7-clock-topc"; |
| reg = <0x10570000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_top0: clock-controller@105d0000 { |
| compatible = "samsung,exynos7-clock-top0"; |
| reg = <0x105d0000 0xb000>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, |
| <&clock_topc DOUT_SCLK_BUS1_PLL>, |
| <&clock_topc DOUT_SCLK_CC_PLL>, |
| <&clock_topc DOUT_SCLK_MFC_PLL>, |
| <&clock_topc DOUT_SCLK_AUD_PLL>; |
| clock-names = "fin_pll", "dout_sclk_bus0_pll", |
| "dout_sclk_bus1_pll", "dout_sclk_cc_pll", |
| "dout_sclk_mfc_pll", "dout_sclk_aud_pll"; |
| }; |
| |
| clock_top1: clock-controller@105e0000 { |
| compatible = "samsung,exynos7-clock-top1"; |
| reg = <0x105e0000 0xb000>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, |
| <&clock_topc DOUT_SCLK_BUS1_PLL>, |
| <&clock_topc DOUT_SCLK_CC_PLL>, |
| <&clock_topc DOUT_SCLK_MFC_PLL>; |
| clock-names = "fin_pll", "dout_sclk_bus0_pll", |
| "dout_sclk_bus1_pll", "dout_sclk_cc_pll", |
| "dout_sclk_mfc_pll"; |
| }; |
| |
| clock_ccore: clock-controller@105b0000 { |
| compatible = "samsung,exynos7-clock-ccore"; |
| reg = <0x105b0000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; |
| clock-names = "fin_pll", "dout_aclk_ccore_133"; |
| }; |
| |
| clock_peric0: clock-controller@13610000 { |
| compatible = "samsung,exynos7-clock-peric0"; |
| reg = <0x13610000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>, |
| <&clock_top0 CLK_SCLK_UART0>; |
| clock-names = "fin_pll", "dout_aclk_peric0_66", |
| "sclk_uart0"; |
| }; |
| |
| clock_peric1: clock-controller@14c80000 { |
| compatible = "samsung,exynos7-clock-peric1"; |
| reg = <0x14c80000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, |
| <&clock_top0 DOUT_ACLK_PERIC1>, |
| <&clock_top0 CLK_SCLK_UART1>, |
| <&clock_top0 CLK_SCLK_UART2>, |
| <&clock_top0 CLK_SCLK_UART3>, |
| <&clock_top0 CLK_SCLK_SPI0>, |
| <&clock_top0 CLK_SCLK_SPI1>, |
| <&clock_top0 CLK_SCLK_SPI2>, |
| <&clock_top0 CLK_SCLK_SPI3>, |
| <&clock_top0 CLK_SCLK_SPI4>, |
| <&clock_top0 CLK_SCLK_I2S1>, |
| <&clock_top0 CLK_SCLK_PCM1>, |
| <&clock_top0 CLK_SCLK_SPDIF>; |
| clock-names = "fin_pll", |
| "dout_aclk_peric1_66", |
| "sclk_uart1", |
| "sclk_uart2", |
| "sclk_uart3", |
| "sclk_spi0", |
| "sclk_spi1", |
| "sclk_spi2", |
| "sclk_spi3", |
| "sclk_spi4", |
| "sclk_i2s1", |
| "sclk_pcm1", |
| "sclk_spdif"; |
| }; |
| |
| clock_peris: clock-controller@10040000 { |
| compatible = "samsung,exynos7-clock-peris"; |
| reg = <0x10040000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>; |
| clock-names = "fin_pll", "dout_aclk_peris_66"; |
| }; |
| |
| clock_fsys0: clock-controller@10e90000 { |
| compatible = "samsung,exynos7-clock-fsys0"; |
| reg = <0x10e90000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, |
| <&clock_top1 DOUT_SCLK_MMC2>; |
| clock-names = "fin_pll", "dout_aclk_fsys0_200", |
| "dout_sclk_mmc2"; |
| }; |
| |
| clock_fsys1: clock-controller@156e0000 { |
| compatible = "samsung,exynos7-clock-fsys1"; |
| reg = <0x156e0000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, |
| <&clock_top1 DOUT_SCLK_MMC0>, |
| <&clock_top1 DOUT_SCLK_MMC1>, |
| <&clock_top1 DOUT_SCLK_UFSUNIPRO20>, |
| <&clock_top1 DOUT_SCLK_PHY_FSYS1>, |
| <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>; |
| clock-names = "fin_pll", "dout_aclk_fsys1_200", |
| "dout_sclk_mmc0", "dout_sclk_mmc1", |
| "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1", |
| "dout_sclk_phy_fsys1_26m"; |
| }; |
| |
| serial_0: serial@13630000 { |
| compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; |
| reg = <0x13630000 0x100>; |
| interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric0 PCLK_UART0>, |
| <&clock_peric0 SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_1: serial@14c20000 { |
| compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; |
| reg = <0x14c20000 0x100>; |
| interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric1 PCLK_UART1>, |
| <&clock_peric1 SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_2: serial@14c30000 { |
| compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; |
| reg = <0x14c30000 0x100>; |
| interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric1 PCLK_UART2>, |
| <&clock_peric1 SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_3: serial@14c40000 { |
| compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; |
| reg = <0x14c40000 0x100>; |
| interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric1 PCLK_UART3>, |
| <&clock_peric1 SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| pinctrl_alive: pinctrl@10580000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x10580000 0x1000>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos7-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pinctrl_bus0: pinctrl@13470000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x13470000 0x1000>; |
| interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_nfc: pinctrl@14cd0000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14cd0000 0x1000>; |
| interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_touch: pinctrl@14ce0000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14ce0000 0x1000>; |
| interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_ff: pinctrl@14c90000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14c90000 0x1000>; |
| interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_ese: pinctrl@14ca0000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14ca0000 0x1000>; |
| interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_fsys0: pinctrl@10e60000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x10e60000 0x1000>; |
| interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_fsys1: pinctrl@15690000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x15690000 0x1000>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_bus1: pinctrl@14870000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14870000 0x1000>; |
| interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| hsi2c_0: i2c@13640000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13640000 0x1000>; |
| interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c0_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C0>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_1: i2c@13650000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13650000 0x1000>; |
| interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c1_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C1>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_2: i2c@14e60000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e60000 0x1000>; |
| interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c2_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C2>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_3: i2c@14e70000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e70000 0x1000>; |
| interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c3_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C3>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_4: i2c@13660000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13660000 0x1000>; |
| interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c4_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C4>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_5: i2c@13670000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13670000 0x1000>; |
| interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c5_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C5>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_6: i2c@14e00000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e00000 0x1000>; |
| interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c6_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C6>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_7: i2c@13e10000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13e10000 0x1000>; |
| interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c7_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C7>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_8: i2c@14e20000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e20000 0x1000>; |
| interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c8_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C8>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_9: i2c@13680000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13680000 0x1000>; |
| interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c9_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C9>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_10: i2c@13690000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13690000 0x1000>; |
| interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c10_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C10>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_11: i2c@136a0000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x136a0000 0x1000>; |
| interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c11_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C11>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| pmu_system_controller: system-controller@105c0000 { |
| compatible = "samsung,exynos7-pmu", "syscon"; |
| reg = <0x105c0000 0x5000>; |
| }; |
| |
| rtc: rtc@10590000 { |
| compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc"; |
| reg = <0x10590000 0x100>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_ccore PCLK_RTC>; |
| clock-names = "rtc"; |
| status = "disabled"; |
| }; |
| |
| watchdog: watchdog@101d0000 { |
| compatible = "samsung,exynos7-wdt"; |
| reg = <0x101d0000 0x100>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peris PCLK_WDT>; |
| clock-names = "watchdog"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| gpu: gpu@14ac0000 { |
| compatible = "samsung,exynos7-mali", |
| "samsung,exynos5433-mali", "arm,mali-t760"; |
| reg = <0x14ac0000 0x5000>; |
| interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "job", "mmu", "gpu"; |
| status = "disabled"; |
| /* TODO: operating points for DVFS, cooling device */ |
| }; |
| |
| mmc_0: mmc@15740000 { |
| compatible = "samsung,exynos7-dw-mshc-smu"; |
| interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x15740000 0x2000>; |
| clocks = <&clock_fsys1 ACLK_MMC0>, |
| <&clock_top1 CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@15750000 { |
| compatible = "samsung,exynos7-dw-mshc"; |
| interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x15750000 0x2000>; |
| clocks = <&clock_fsys1 ACLK_MMC1>, |
| <&clock_top1 CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@15560000 { |
| compatible = "samsung,exynos7-dw-mshc-smu"; |
| interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x15560000 0x2000>; |
| clocks = <&clock_fsys0 ACLK_MMC2>, |
| <&clock_top1 CLK_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@13620000 { |
| compatible = "samsung,exynos7-adc"; |
| reg = <0x13620000 0x100>; |
| interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric0 PCLK_ADCIF>; |
| clock-names = "adc"; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@136c0000 { |
| compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm"; |
| reg = <0x136c0000 0x100>; |
| interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>; |
| samsung,pwm-outputs = <0>, <1>, <2>, <3>; |
| #pwm-cells = <3>; |
| clocks = <&clock_peric0 PCLK_PWM>; |
| clock-names = "timers"; |
| }; |
| |
| tmuctrl_0: tmu@10060000 { |
| compatible = "samsung,exynos7-tmu"; |
| reg = <0x10060000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peris PCLK_TMU>, |
| <&clock_peris SCLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_sclk"; |
| #thermal-sensor-cells = <0>; |
| }; |
| |
| ufs: ufs@15570000 { |
| compatible = "samsung,exynos7-ufs"; |
| reg = <0x15570000 0x100>, /* 0: HCI standard */ |
| <0x15570100 0x100>, /* 1: Vendor specificed */ |
| <0x15571000 0x200>, /* 2: UNIPRO */ |
| <0x15572000 0x300>; /* 3: UFS protector */ |
| reg-names = "hci", "vs_hci", "unipro", "ufsp"; |
| interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_fsys1 ACLK_UFS20_LINK>, |
| <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; |
| clock-names = "core_clk", "sclk_unipro_main"; |
| freq-table-hz = <0 0>, <0 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; |
| phys = <&ufs_phy>; |
| phy-names = "ufs-phy"; |
| status = "disabled"; |
| }; |
| |
| ufs_phy: ufs-phy@15571800 { |
| compatible = "samsung,exynos7-ufs-phy"; |
| reg = <0x15571800 0x240>; |
| reg-names = "phy-pma"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <0>; |
| clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, |
| <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, |
| <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, |
| <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; |
| clock-names = "ref_clk", "rx1_symbol_clk", |
| "rx0_symbol_clk", |
| "tx0_symbol_clk"; |
| }; |
| |
| usbdrd_phy: phy@15500000 { |
| compatible = "samsung,exynos7-usbdrd-phy"; |
| reg = <0x15500000 0x100>; |
| clocks = <&clock_fsys0 ACLK_USBDRD300>, |
| <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, |
| <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, |
| <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, |
| <&clock_fsys0 SCLK_USBDRD300_REFCLK>; |
| clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <1>; |
| }; |
| |
| usbdrd: usb@15400000 { |
| compatible = "samsung,exynos7-dwusb3"; |
| clocks = <&clock_fsys0 ACLK_USBDRD300>, |
| <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, |
| <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; |
| clock-names = "usbdrd30", "usbdrd30_susp_clk", |
| "usbdrd30_axius_clk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x15400000 0x10000>; |
| |
| usb@0 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0x10000>; |
| interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| }; |
| |
| thermal-zones { |
| atlas_thermal: cluster0-thermal { |
| polling-delay-passive = <0>; /* milliseconds */ |
| polling-delay = <0>; /* milliseconds */ |
| thermal-sensors = <&tmuctrl_0>; |
| #include "exynos7-trip-points.dtsi" |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| }; |
| |
| #include "exynos7-pinctrl.dtsi" |
| #include "arm/samsung/exynos-syscon-restart.dtsi" |
