diff --git a/Documentation/dev-tools/kunit/faq.rst b/Documentation/dev-tools/kunit/faq.rst
index 1628862..8d5029a 100644
--- a/Documentation/dev-tools/kunit/faq.rst
+++ b/Documentation/dev-tools/kunit/faq.rst
@@ -90,7 +90,7 @@
    re-run kunit_tool.
 5. Try to run ``make ARCH=um defconfig`` before running ``kunit.py run``. This
    may help clean up any residual config items which could be causing problems.
-6. Finally, try running KUnit outside UML. KUnit and KUnit tests can run be
+6. Finally, try running KUnit outside UML. KUnit and KUnit tests can be
    built into any kernel, or can be built as a module and loaded at runtime.
    Doing so should allow you to determine if UML is causing the issue you're
    seeing. When tests are built-in, they will execute when the kernel boots, and
diff --git a/Documentation/dev-tools/kunit/style.rst b/Documentation/dev-tools/kunit/style.rst
index da1d6f0..8dbcdc5 100644
--- a/Documentation/dev-tools/kunit/style.rst
+++ b/Documentation/dev-tools/kunit/style.rst
@@ -175,17 +175,17 @@
 
 .. code-block:: none
 
-        config FOO_KUNIT_TEST
-                tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
-                depends on KUNIT
-                default KUNIT_ALL_TESTS
-                help
-                    This builds unit tests for foo.
+	config FOO_KUNIT_TEST
+		tristate "KUnit test for foo" if !KUNIT_ALL_TESTS
+		depends on KUNIT
+		default KUNIT_ALL_TESTS
+		help
+		  This builds unit tests for foo.
 
-                    For more information on KUnit and unit tests in general, please refer
-                    to the KUnit documentation in Documentation/dev-tools/kunit
+		  For more information on KUnit and unit tests in general, please refer
+		  to the KUnit documentation in Documentation/dev-tools/kunit/.
 
-                    If unsure, say N
+		  If unsure, say N.
 
 
 Test File and Module Names
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 62142a4..9c28c51 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -92,7 +92,7 @@
 the second parameter, in this case, is what the value is expected to be; the
 last value is what the value actually is. If ``add`` passes all of these
 expectations, the test case, ``add_test_basic`` will pass; if any one of these
-expectations fail, the test case will fail.
+expectations fails, the test case will fail.
 
 It is important to understand that a test case *fails* when any expectation is
 violated; however, the test will continue running, potentially trying other
@@ -202,7 +202,7 @@
 	kunit_test_suite(example_test_suite);
 
 In the above example the test suite, ``example_test_suite``, would run the test
-cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``,
+cases ``example_test_foo``, ``example_test_bar``, and ``example_test_baz``;
 each would have ``example_test_init`` called immediately before it and would
 have ``example_test_exit`` called immediately after it.
 ``kunit_test_suite(example_test_suite)`` registers the test suite with the
@@ -229,7 +229,7 @@
 such that the definition of that function can be changed without affecting the
 rest of the code base. In the kernel this primarily comes from two constructs,
 classes, structs that contain function pointers that are provided by the
-implementer, and architecture specific functions which have definitions selected
+implementer, and architecture-specific functions which have definitions selected
 at compile time.
 
 Classes
@@ -459,7 +459,7 @@
 By default KUnit uses UML as a way to provide dependencies for code under test.
 Under most circumstances KUnit's usage of UML should be treated as an
 implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code or test
+are instances where being able to run architecture-specific code or test
 against real hardware is desirable. For these reasons KUnit supports running on
 other architectures.
 
@@ -599,7 +599,7 @@
 hardware state in between test cases; if this is not possible, you may only be
 able to run one test case per invocation.
 
-.. TODO(brendanhiggins@google.com): Add an actual example of an architecture
+.. TODO(brendanhiggins@google.com): Add an actual example of an architecture-
    dependent KUnit test.
 
 KUnit debugfs representation
diff --git a/include/kunit/test.h b/include/kunit/test.h
index db1b0ae..df60be7 100644
--- a/include/kunit/test.h
+++ b/include/kunit/test.h
@@ -1105,7 +1105,7 @@ do {									       \
 	KUNIT_ASSERTION(test,						       \
 			strcmp(__left, __right) op 0,			       \
 			kunit_binary_str_assert,			       \
-			KUNIT_INIT_BINARY_ASSERT_STRUCT(test,		       \
+			KUNIT_INIT_BINARY_STR_ASSERT_STRUCT(test,	       \
 							assert_type,	       \
 							#op,		       \
 							#left,		       \
diff --git a/tools/testing/kunit/.gitattributes b/tools/testing/kunit/.gitattributes
deleted file mode 100644
index 5b7da1f..0000000
--- a/tools/testing/kunit/.gitattributes
+++ /dev/null
@@ -1 +0,0 @@
-test_data/* binary
diff --git a/tools/testing/kunit/kunit.py b/tools/testing/kunit/kunit.py
index ebf5f57..d4f7846 100755
--- a/tools/testing/kunit/kunit.py
+++ b/tools/testing/kunit/kunit.py
@@ -11,7 +11,6 @@
 import sys
 import os
 import time
-import shutil
 
 from collections import namedtuple
 from enum import Enum, auto
@@ -44,11 +43,6 @@
 	BUILD_FAILURE = auto()
 	TEST_FAILURE = auto()
 
-def create_default_kunitconfig():
-	if not os.path.exists(kunit_kernel.kunitconfig_path):
-		shutil.copyfile('arch/um/configs/kunit_defconfig',
-				kunit_kernel.kunitconfig_path)
-
 def get_kernel_root_path():
 	parts = sys.argv[0] if not __file__ else __file__
 	parts = os.path.realpath(parts).split('tools/testing/kunit')
@@ -61,7 +55,6 @@
 	kunit_parser.print_with_timestamp('Configuring KUnit Kernel ...')
 
 	config_start = time.time()
-	create_default_kunitconfig()
 	success = linux.build_reconfig(request.build_dir, request.make_options)
 	config_end = time.time()
 	if not success:
@@ -262,12 +255,12 @@
 		if not os.path.exists(cli_args.build_dir):
 			os.mkdir(cli_args.build_dir)
 
-		if not os.path.exists(kunit_kernel.kunitconfig_path):
-			create_default_kunitconfig()
-
 		if not linux:
 			linux = kunit_kernel.LinuxSourceTree()
 
+		linux.create_kunitconfig(cli_args.build_dir)
+		linux.read_kunitconfig(cli_args.build_dir)
+
 		request = KunitRequest(cli_args.raw_output,
 				       cli_args.timeout,
 				       cli_args.jobs,
@@ -283,12 +276,12 @@
 				not os.path.exists(cli_args.build_dir)):
 			os.mkdir(cli_args.build_dir)
 
-		if not os.path.exists(kunit_kernel.kunitconfig_path):
-			create_default_kunitconfig()
-
 		if not linux:
 			linux = kunit_kernel.LinuxSourceTree()
 
+		linux.create_kunitconfig(cli_args.build_dir)
+		linux.read_kunitconfig(cli_args.build_dir)
+
 		request = KunitConfigRequest(cli_args.build_dir,
 					     cli_args.make_options)
 		result = config_tests(linux, request)
@@ -301,6 +294,9 @@
 		if not linux:
 			linux = kunit_kernel.LinuxSourceTree()
 
+		linux.create_kunitconfig(cli_args.build_dir)
+		linux.read_kunitconfig(cli_args.build_dir)
+
 		request = KunitBuildRequest(cli_args.jobs,
 					    cli_args.build_dir,
 					    cli_args.alltests,
@@ -315,6 +311,9 @@
 		if not linux:
 			linux = kunit_kernel.LinuxSourceTree()
 
+		linux.create_kunitconfig(cli_args.build_dir)
+		linux.read_kunitconfig(cli_args.build_dir)
+
 		exec_request = KunitExecRequest(cli_args.timeout,
 						cli_args.build_dir,
 						cli_args.alltests)
@@ -337,7 +336,7 @@
 				kunit_output = f.read().splitlines()
 		request = KunitParseRequest(cli_args.raw_output,
 					    kunit_output,
-					    cli_args.build_dir,
+					    None,
 					    cli_args.json)
 		result = parse_tests(request)
 		if result.status != KunitStatus.SUCCESS:
diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py
index b557b1e..2e3cc0f 100644
--- a/tools/testing/kunit/kunit_kernel.py
+++ b/tools/testing/kunit/kunit_kernel.py
@@ -6,10 +6,10 @@
 # Author: Felix Guo <felixguoxiuping@gmail.com>
 # Author: Brendan Higgins <brendanhiggins@google.com>
 
-
 import logging
 import subprocess
 import os
+import shutil
 import signal
 
 from contextlib import ExitStack
@@ -18,8 +18,10 @@
 import kunit_parser
 
 KCONFIG_PATH = '.config'
-kunitconfig_path = '.kunitconfig'
+KUNITCONFIG_PATH = '.kunitconfig'
+DEFAULT_KUNITCONFIG_PATH = 'arch/um/configs/kunit_defconfig'
 BROKEN_ALLCONFIG_PATH = 'tools/testing/kunit/configs/broken_on_uml.config'
+OUTFILE_PATH = 'test.log'
 
 class ConfigError(Exception):
 	"""Represents an error trying to configure the Linux kernel."""
@@ -82,36 +84,51 @@
 		if build_dir:
 			command += ['O=' + build_dir]
 		try:
-			subprocess.check_output(command, stderr=subprocess.STDOUT)
+			proc = subprocess.Popen(command,
+						stderr=subprocess.PIPE,
+						stdout=subprocess.DEVNULL)
 		except OSError as e:
-			raise BuildError('Could not call execute make: ' + str(e))
-		except subprocess.CalledProcessError as e:
-			raise BuildError(e.output.decode())
+			raise BuildError('Could not call make command: ' + str(e))
+		_, stderr = proc.communicate()
+		if proc.returncode != 0:
+			raise BuildError(stderr.decode())
+		if stderr:  # likely only due to build warnings
+			print(stderr.decode())
 
-	def linux_bin(self, params, timeout, build_dir, outfile):
+	def linux_bin(self, params, timeout, build_dir):
 		"""Runs the Linux UML binary. Must be named 'linux'."""
 		linux_bin = './linux'
 		if build_dir:
 			linux_bin = os.path.join(build_dir, 'linux')
+		outfile = get_outfile_path(build_dir)
 		with open(outfile, 'w') as output:
 			process = subprocess.Popen([linux_bin] + params,
 						   stdout=output,
 						   stderr=subprocess.STDOUT)
 			process.wait(timeout)
 
-
 def get_kconfig_path(build_dir):
 	kconfig_path = KCONFIG_PATH
 	if build_dir:
 		kconfig_path = os.path.join(build_dir, KCONFIG_PATH)
 	return kconfig_path
 
+def get_kunitconfig_path(build_dir):
+	kunitconfig_path = KUNITCONFIG_PATH
+	if build_dir:
+		kunitconfig_path = os.path.join(build_dir, KUNITCONFIG_PATH)
+	return kunitconfig_path
+
+def get_outfile_path(build_dir):
+	outfile_path = OUTFILE_PATH
+	if build_dir:
+		outfile_path = os.path.join(build_dir, OUTFILE_PATH)
+	return outfile_path
+
 class LinuxSourceTree(object):
 	"""Represents a Linux kernel source tree with KUnit tests."""
 
 	def __init__(self):
-		self._kconfig = kunit_config.Kconfig()
-		self._kconfig.read_from_file(kunitconfig_path)
 		self._ops = LinuxSourceTreeOperations()
 		signal.signal(signal.SIGINT, self.signal_handler)
 
@@ -123,6 +140,16 @@
 			return False
 		return True
 
+	def create_kunitconfig(self, build_dir, defconfig=DEFAULT_KUNITCONFIG_PATH):
+		kunitconfig_path = get_kunitconfig_path(build_dir)
+		if not os.path.exists(kunitconfig_path):
+			shutil.copyfile(defconfig, kunitconfig_path)
+
+	def read_kunitconfig(self, build_dir):
+		kunitconfig_path = get_kunitconfig_path(build_dir)
+		self._kconfig = kunit_config.Kconfig()
+		self._kconfig.read_from_file(kunitconfig_path)
+
 	def validate_config(self, build_dir):
 		kconfig_path = get_kconfig_path(build_dir)
 		validated_kconfig = kunit_config.Kconfig()
@@ -178,8 +205,8 @@
 
 	def run_kernel(self, args=[], build_dir='', timeout=None):
 		args.extend(['mem=1G'])
-		outfile = 'test.log'
-		self._ops.linux_bin(args, timeout, build_dir, outfile)
+		self._ops.linux_bin(args, timeout, build_dir)
+		outfile = get_outfile_path(build_dir)
 		subprocess.call(['stty', 'sane'])
 		with open(outfile, 'r') as file:
 			for line in file:
diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py
index 84a1af2..bbfe1b4 100644
--- a/tools/testing/kunit/kunit_parser.py
+++ b/tools/testing/kunit/kunit_parser.py
@@ -12,7 +12,7 @@
 from datetime import datetime
 from enum import Enum, auto
 from functools import reduce
-from typing import List
+from typing import List, Optional, Tuple
 
 TestResult = namedtuple('TestResult', ['status','suites','log'])
 
@@ -54,6 +54,7 @@
 def isolate_kunit_output(kernel_output):
 	started = False
 	for line in kernel_output:
+		line = line.rstrip()  # line always has a trailing \n
 		if kunit_start_re.search(line):
 			prefix_len = len(line.split('TAP version')[0])
 			started = True
@@ -65,7 +66,7 @@
 
 def raw_output(kernel_output):
 	for line in kernel_output:
-		print(line)
+		print(line.rstrip())
 
 DIVIDER = '=' * 60
 
@@ -151,7 +152,7 @@
 	else:
 		return False
 
-def parse_test_case(lines: List[str]) -> TestCase:
+def parse_test_case(lines: List[str]) -> Optional[TestCase]:
 	test_case = TestCase()
 	save_non_diagnositic(lines, test_case)
 	while parse_diagnostic(lines, test_case):
@@ -163,7 +164,7 @@
 
 SUBTEST_HEADER = re.compile(r'^[\s]+# Subtest: (.*)$')
 
-def parse_subtest_header(lines: List[str]) -> str:
+def parse_subtest_header(lines: List[str]) -> Optional[str]:
 	consume_non_diagnositic(lines)
 	if not lines:
 		return None
@@ -176,7 +177,7 @@
 
 SUBTEST_PLAN = re.compile(r'[\s]+[0-9]+\.\.([0-9]+)')
 
-def parse_subtest_plan(lines: List[str]) -> int:
+def parse_subtest_plan(lines: List[str]) -> Optional[int]:
 	consume_non_diagnositic(lines)
 	match = SUBTEST_PLAN.match(lines[0])
 	if match:
@@ -230,7 +231,7 @@
 	max_test_case_status = bubble_up_errors(lambda x: x.status, test_suite.cases)
 	return max_status(max_test_case_status, test_suite.status)
 
-def parse_test_suite(lines: List[str], expected_suite_index: int) -> TestSuite:
+def parse_test_suite(lines: List[str], expected_suite_index: int) -> Optional[TestSuite]:
 	if not lines:
 		return None
 	consume_non_diagnositic(lines)
@@ -271,7 +272,7 @@
 
 TEST_PLAN = re.compile(r'[0-9]+\.\.([0-9]+)')
 
-def parse_test_plan(lines: List[str]) -> int:
+def parse_test_plan(lines: List[str]) -> Optional[int]:
 	consume_non_diagnositic(lines)
 	match = TEST_PLAN.match(lines[0])
 	if match:
@@ -310,7 +311,7 @@
 	else:
 		return TestResult(TestStatus.NO_TESTS, [], lines)
 
-def print_and_count_results(test_result: TestResult) -> None:
+def print_and_count_results(test_result: TestResult) -> Tuple[int, int, int]:
 	total_tests = 0
 	failed_tests = 0
 	crashed_tests = 0
diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py
index 0b60855..497ab51 100755
--- a/tools/testing/kunit/kunit_tool_test.py
+++ b/tools/testing/kunit/kunit_tool_test.py
@@ -102,7 +102,7 @@
 			'test_data/test_output_isolated_correctly.log')
 		file = open(log_path)
 		result = kunit_parser.isolate_kunit_output(file.readlines())
-		self.assertContains('TAP version 14\n', result)
+		self.assertContains('TAP version 14', result)
 		self.assertContains('	# Subtest: example', result)
 		self.assertContains('	1..2', result)
 		self.assertContains('	ok 1 - example_simple_test', result)
@@ -115,7 +115,7 @@
 			'test_data/test_pound_sign.log')
 		with open(log_path) as file:
 			result = kunit_parser.isolate_kunit_output(file.readlines())
-		self.assertContains('TAP version 14\n', result)
+		self.assertContains('TAP version 14', result)
 		self.assertContains('	# Subtest: kunit-resource-test', result)
 		self.assertContains('	1..5', result)
 		self.assertContains('	ok 1 - kunit_resource_test_init_resources', result)