# SPDX-License-Identifier: GPL-2.0-or-later
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2500-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ASPEED AST2500 Pin Controller

maintainers:
  - Andrew Jeffery <andrew@aj.id.au>

description: |+
  The pin controller node should be the child of a syscon node with the
  required property:

  - compatible: 	Should be one of the following:
  			"aspeed,ast2500-scu", "syscon", "simple-mfd"
  			"aspeed,g5-scu", "syscon", "simple-mfd"

  Refer to the the bindings described in
  Documentation/devicetree/bindings/mfd/syscon.yaml

properties:
  compatible:
    const: aspeed,ast2500-pinctrl
  reg:
    maxItems: 2

  aspeed,external-nodes:
    minItems: 2
    maxItems: 2
    items:
      maxItems: 1
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description: |
      A cell of phandles to external controller nodes:
      0: compatible with "aspeed,ast2500-gfx", "syscon"
      1: compatible with "aspeed,ast2500-lhc", "syscon"

patternProperties:
  '^.*$':
    if:
      type: object
    then:
      patternProperties:
        "^function|groups$":
          $ref: "/schemas/types.yaml#/definitions/string"
          enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
                  ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
                  ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
                  GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
                  I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
                  LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
                  MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
                  NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
                  NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
                  PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
                  RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
                  SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
                  SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
                  SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
                  SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
                  TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
                  USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
                  VGAVS, VPI24, VPO, WDTRST1, WDTRST2]

allOf:
  - $ref: "pinctrl.yaml#"

required:
  - compatible
  - aspeed,external-nodes

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/aspeed-clock.h>
    apb {
        compatible = "simple-bus";
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        syscon: scu@1e6e2000 {
            compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
            reg = <0x1e6e2000 0x1a8>;
            #clock-cells = <1>;
            #reset-cells = <1>;

            pinctrl: pinctrl {
                compatible = "aspeed,ast2500-pinctrl";
                aspeed,external-nodes = <&gfx>, <&lhc>;

                pinctrl_i2c3_default: i2c3_default {
                    function = "I2C3";
                    groups = "I2C3";
                };

                pinctrl_gpioh0_unbiased_default: gpioh0 {
                    pins = "A18";
                    bias-disable;
                };
            };
        };

        gfx: display@1e6e6000 {
            compatible = "aspeed,ast2500-gfx", "syscon";
            reg = <0x1e6e6000 0x1000>;
            reg-io-width = <4>;
            clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
            resets = <&syscon ASPEED_RESET_CRT1>;
            interrupts = <0x19>;
            syscon = <&syscon>;
            memory-region = <&gfx_memory>;
        };
    };

    lpc: lpc@1e789000 {
        compatible = "aspeed,ast2500-lpc", "simple-mfd";
        reg = <0x1e789000 0x1000>;

        #address-cells = <1>;
        #size-cells = <1>;
        ranges = <0x0 0x1e789000 0x1000>;

        lpc_host: lpc-host@80 {
            compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
            reg = <0x80 0x1e0>;
            reg-io-width = <4>;

            #address-cells = <1>;
            #size-cells = <1>;
            ranges = <0x0 0x80 0x1e0>;

            lhc: lhc@20 {
                   compatible = "aspeed,ast2500-lhc";
                   reg = <0x20 0x24>, <0x48 0x8>;
            };
        };
    };

    gfx_memory: framebuffer {
        size = <0x01000000>;
        alignment = <0x01000000>;
        compatible = "shared-dma-pool";
        reusable;
    };