diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3..cd40bb5 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index db2cb7d..6ee781b 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,6 +26,7 @@
 CONFIG_MACH_MX28EVK=y
 CONFIG_MACH_STMP378X_DEVB=y
 CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..04a85c5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -182,6 +182,11 @@
 	help
 	  Select this if you are using the eco920 board
 
+config MACH_RSI_EWS
+	bool "RSI Embedded Webserver"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using RSIs EWS board.
 endif
 
 # ----------------------------------------------------------
@@ -381,6 +386,14 @@
 	  This enables support for the GS_IA18_S board
 	  produced by GeoSIG Ltd company. This is an internet accelerograph.
 	  <http://www.geosig.com>
+
+config MACH_USB_A9G20
+	bool "CALAO USB-A9G20"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Calao Systems USB-A9G20.
+	  <http://www.calao-systems.com>
+
 endif
 
 if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..d992dd5 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -36,12 +36,13 @@
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
+obj-$(CONFIG_MACH_RSI_EWS)	+= board-rsi-ews.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
+obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a926x.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
@@ -53,7 +54,7 @@
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a9263.o
+obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
 obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o
 
 # AT91SAM9RL board-specific support
@@ -67,6 +68,7 @@
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
 obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o
+obj-$(CONFIG_MACH_USB_A9G20)	+= board-usb-a926x.o
 
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
new file mode 100644
index 0000000..e927df0
--- /dev/null
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -0,0 +1,233 @@
+/*
+ * board-rsi-ews.c
+ *
+ *  Copyright (C)
+ *  2005 SAN People,
+ *  2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include <linux/gpio.h>
+
+#include "generic.h"
+
+static void __init rsi_ews_init_early(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91_initialize(18432000);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	/* This one is for debugging */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	/* Dialin/-out modem interface */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART3 on ttyS4. (Rx, Tx, RTS) */
+	/* RS485 communication */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+/*
+ * Ethernet
+ */
+static struct at91_eth_data rsi_ews_eth_data __initdata = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
+	.ports		= 1,
+};
+
+/*
+ * SD/MC
+ */
+static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PB27,
+	.wp_pin		= AT91_PIN_PB29,
+};
+
+/*
+ * I2C
+ */
+static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+	{
+		I2C_BOARD_INFO("24c01", 0x50),
+	}
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led rsi_ews_leds[] = {
+	{
+		.name			= "led0",
+		.gpio			= AT91_PIN_PB6,
+		.active_low		= 0,
+	},
+	{
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB7,
+		.active_low		= 0,
+	},
+	{
+		.name			= "led2",
+		.gpio			= AT91_PIN_PB8,
+		.active_low		= 0,
+	},
+	{
+		.name			= "led3",
+		.gpio			= AT91_PIN_PB9,
+		.active_low		= 0,
+	},
+};
+
+/*
+ * DataFlash
+ */
+static struct spi_board_info rsi_ews_spi_devices[] = {
+	{	/* DataFlash chip 1*/
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 5 * 1000 * 1000,
+	},
+	{	/* DataFlash chip 2*/
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 5 * 1000 * 1000,
+	},
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition rsiews_nor_partitions[] = {
+	{
+		.name		= "boot",
+		.offset		= 0,
+		.size		= 3 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_2M - (3 * SZ_128K)
+	},
+	{
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_8M
+	},
+	{
+		.name		= "kernelupd",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 3 * SZ_512K,
+		.mask_flags	= MTD_WRITEABLE
+	},
+	{
+		.name		= "rootupd",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 9 * SZ_512K,
+		.mask_flags	= MTD_WRITEABLE
+	},
+};
+
+static struct physmap_flash_data rsiews_nor_data = {
+	.width		= 2,
+	.parts		= rsiews_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(rsiews_nor_partitions),
+};
+
+#define NOR_BASE	AT91_CHIPSELECT_0
+#define NOR_SIZE	SZ_16M
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= NOR_BASE,
+		.end	= NOR_BASE + NOR_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device rsiews_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &rsiews_nor_data,
+	},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+/*
+ * Init Func
+ */
+static void __init rsi_ews_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	at91_set_gpio_output(AT91_PIN_PA21, 0);
+	/* Ethernet */
+	at91_add_device_eth(&rsi_ews_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&rsi_ews_usbh_data);
+	/* I2C */
+	at91_add_device_i2c(rsi_ews_i2c_devices,
+			ARRAY_SIZE(rsi_ews_i2c_devices));
+	/* SPI */
+	at91_add_device_spi(rsi_ews_spi_devices,
+			ARRAY_SIZE(rsi_ews_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &rsi_ews_mmc_data);
+	/* NOR Flash */
+	platform_device_register(&rsiews_nor_flash);
+	/* LEDs */
+	at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
+}
+
+MACHINE_START(RSI_EWS, "RSI EWS")
+	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
+	.timer		= &at91rm9200_timer,
+	.map_io		= at91_map_io,
+	.init_early	= rsi_ews_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= rsi_ews_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
deleted file mode 100644
index bac9b65..0000000
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9260.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *  Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA31,
-	.is_rmii	= 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Uboot & Kernel",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Root FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	},
-	{
-		.name	= "FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	}
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-//	.det_pin	= ... not connected
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * GPIO Buttons
- */
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* USER PUSH BUTTON */
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB10,
-		.active_low	= 1,
-		.desc		= "user_pb",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-	at91_set_deglitch(AT91_PIN_PB10, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* user_led (green) */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PB21,
-		.active_low		= 0,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* shutdown controller, wakeup button (5 msec low) */
-	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-				| AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
deleted file mode 100644
index 5bd7357..0000000
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9263.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation.
- *  Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.00 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PB11,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	}
-#endif
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Root FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	},
-	{
-		.name	= "FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	}
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-//	.det_pin	= ... not connected
-	.rdy_pin	= AT91_PIN_PA22,
-	.enable_pin	= AT91_PIN_PD15,
-	.partition_info	= nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* USER PUSH BUTTON */
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB10,
-		.active_low	= 1,
-		.desc		= "user_pb",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-	at91_set_deglitch(AT91_PIN_PB10, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* user_led (green) */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PB21,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* shutdown controller, wakeup button (5 msec low) */
-	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-				| AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
new file mode 100644
index 0000000..5852d3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a926x.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *  Copyright (C) 2007 Calao-systems
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+	/* Initialize processor: 12.00 MHz crystal */
+	at91_initialize(12000000);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PB11,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+static void __init ek_add_device_udc(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+		ek_udc_data.vbus_pin = AT91_PIN_PC5;
+
+	at91_add_device_udc(&ek_udc_data);
+}
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
+static int at91_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
+	return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
+		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+		"mmc-spi-detect", data);
+}
+
+static void at91_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
+}
+
+static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
+	.init = at91_mmc_spi_init,
+	.exit = at91_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info usb_a9263_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	}
+#endif
+};
+
+static struct spi_board_info usb_a9g20_spi_devices[] = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,	/* max spi clock (SCK) speed in HZ */
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &at91_mmc_spi_pdata,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+static void __init ek_add_device_spi(void)
+{
+	if (machine_is_usb_a9263())
+		at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
+	else if (machine_is_usb_a9g20())
+		at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
+}
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PE31,
+	.is_rmii	= 1,
+};
+
+static void __init ek_add_device_eth(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+		ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
+
+	at91_add_device_eth(&ek_macb_data);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "barebox",
+		.offset	= 0,
+		.size	= 3 * SZ_128K,
+	}, {
+		.name	= "bareboxenv",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_128K,
+	}, {
+		.name	= "bareboxenv2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_128K,
+	}, {
+		.name	= "kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
+	}, {
+		.name	= "data",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+};
+
+static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
+		ek_nand_data.rdy_pin	= AT91_PIN_PC13;
+		ek_nand_data.enable_pin	= AT91_PIN_PC14;
+	}
+
+	/* configure chip-select 3 (NAND) */
+	if (machine_is_usb_a9g20())
+		sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+	else
+		sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* USER PUSH BUTTON */
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB10,
+		.active_low	= 1,
+		.desc		= "user_pb",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
+	at91_set_deglitch(AT91_PIN_PB10, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* user_led (green) */
+		.name			= "user_led",
+		.gpio			= AT91_PIN_PB21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rv3029c2", 0x56),
+	},
+};
+
+static void __init ek_add_device_leds(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+		ek_leds[0].active_low = 0;
+
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	ek_add_device_udc();
+	/* SPI */
+	ek_add_device_spi();
+	/* Ethernet */
+	ek_add_device_eth();
+	/* NAND */
+	ek_add_device_nand();
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	ek_add_device_leds();
+
+	if (machine_is_usb_a9g20()) {
+		/* I2C */
+		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+	} else {
+		/* I2C */
+		at91_add_device_i2c(NULL, 0);
+		/* shutdown controller, wakeup button (5 msec low) */
+		at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+				| AT91_SHDW_WKMODE0_LOW
+				| AT91_SHDW_RTTWKEN);
+	}
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+	/* Maintainer: calao-systems */
+	.timer		= &at91sam926x_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+	/* Maintainer: calao-systems */
+	.timer		= &at91sam926x_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
+	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
+	.timer		= &at91sam926x_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..85820ad 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -64,7 +64,12 @@
 
 #elif defined(CONFIG_ARCH_AT91SAM9G20)
 
+#if defined(CONFIG_MACH_USB_A9G20)
+#define AT91SAM9_MASTER_CLOCK	133000000
+#else
 #define AT91SAM9_MASTER_CLOCK	132096000
+#endif
+
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18..97a2493 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
 
+config MACH_VISION_EP9307
+	bool "Support Vision Engraving Systems EP9307 SoM"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Vision Engraving Systems EP9307 SoM.
+
 choice
 	prompt "Select a UART for early kernel messages"
 
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2..574209d9 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@
 obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
 obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 0000000..d96e4db
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE	EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE	0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+	{
+		.virtual	= VISION_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VISION_PHYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init vision_map_io(void)
+{
+	ep93xx_map_io();
+
+	iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+	.phy_id		= 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE	EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+	int err;
+
+	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+				dev_name(&pdev->dev));
+	if (err)
+		return err;
+
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+				 EP93XX_SYSCON_DEVCFG_RASONP3 |
+				 EP93XX_SYSCON_DEVCFG_EXVC);
+
+	return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+	gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+	if (blank_mode)
+		gpio_set_value(VISION_LCD_ENABLE, 0);
+	else
+		gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+	.num_modes	= EP93XXFB_USE_MODEDB,
+	.bpp		= 16,
+	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+	.setup		= vision_lcd_setup,
+	.teardown	= vision_lcd_teardown,
+	.blank		= vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE	(EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE	(PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE	(PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE	(PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+	.gpio_base	= PCA9539_74_GPIO_BASE,
+	.irq_base	= EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+	.gpio_base	= PCA9539_75_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+	.gpio_base	= PCA9539_76_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+	.gpio_base	= PCA9539_77_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+		.irq		= IRQ_EP93XX_EXT1,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x74),
+		.platform_data	= &pca953x_74_gpio_data,
+		.irq		= gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x75),
+		.platform_data	= &pca953x_75_gpio_data,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x76),
+		.platform_data	= &pca953x_76_gpio_data,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x77),
+		.platform_data	= &pca953x_77_gpio_data,
+	},
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+	{
+		.name	= "SPI bootstrap",
+		.offset	= 0,
+		.size	= SZ_4K,
+	}, {
+		.name	= "Bootstrap config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4K,
+	}, {
+		.name	= "System config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+	.name		= "SPI Flash",
+	.parts		= vision_spi_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+				spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+	.setup		= vision_spi_flash_hw_setup,
+	.cleanup	= vision_spi_flash_hw_cleanup,
+	.cs_control	= vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS	EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+	{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+	{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+			irqreturn_t (*func)(int, void *), void *pdata)
+{
+	int err;
+
+	err = gpio_request_array(vision_spi_mmc_gpios,
+				 ARRAY_SIZE(vision_spi_mmc_gpios));
+	if (err)
+		return err;
+
+	err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+	if (err)
+		goto exit_err;
+
+	err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+			IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+	if (err)
+		goto exit_err;
+
+	return 0;
+
+exit_err:
+	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+	return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+	free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+	return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+	return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+	.init		= vision_spi_mmc_init,
+	.exit		= vision_spi_mmc_exit,
+	.get_ro		= vision_spi_mmc_get_ro,
+	.get_cd		= vision_spi_mmc_get_cd,
+	.detect_delay	= 100,
+	.powerup_msecs	= 100,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+				spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+	.setup		= vision_spi_mmc_hw_setup,
+	.cleanup	= vision_spi_mmc_hw_cleanup,
+	.cs_control	= vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+	{
+		.modalias		= "sst25l",
+		.platform_data		= &vision_spi_flash_data,
+		.controller_data	= &vision_spi_flash_hw,
+		.max_speed_hz		= 20000000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	}, {
+		.modalias		= "mmc_spi",
+		.platform_data		= &vision_spi_mmc_data,
+		.controller_data	= &vision_spi_mmc_hw,
+		.max_speed_hz		= 20000000,
+		.bus_num		= 0,
+		.chip_select		= 1,
+		.mode			= SPI_MODE_3,
+	},
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+	.num_chipselect		= ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+	ep93xx_init_devices();
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+	ep93xx_register_eth(&vision_eth_data, 1);
+	ep93xx_register_fb(&ep93xxfb_info);
+	ep93xx_register_pwm(1, 0);
+
+	/*
+	 * Request the gpio expander's interrupt gpio line now to prevent
+	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+	 */
+	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+				"pca9539:74"))
+		pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+				ARRAY_SIZE(vision_i2c_info));
+	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+				ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.atag_offset	= 0x100,
+	.map_io		= vision_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= vision_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 1760ee7..a652735 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -16,6 +16,16 @@
 	help
 	  Enable EXYNOS4210 CPU support
 
+config SOC_EXYNOS4212
+	bool
+	help
+	  Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+	bool
+	help
+	  Enable EXYNOS4412 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
@@ -112,6 +122,8 @@
 
 menu "EXYNOS4 Machines"
 
+comment "EXYNOS4210 Boards"
+
 config MACH_SMDKC210
 	bool "SMDKC210"
 	select MACH_SMDKV310
@@ -204,6 +216,48 @@
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
+config MACH_ORIGEN
+	bool "ORIGEN"
+	select CPU_EXYNOS4210
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC2
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+	bool "SMDK4212"
+	select SOC_EXYNOS4212
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
+	select S3C_DEV_I2C7
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+	bool "SMDK4412"
+	select SOC_EXYNOS4412
+	select MACH_SMDK4212
+	help
+	  Machine support for Samsung SMDK4412
+
 endmenu
 
 comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index e3e93ea..c9b2e1f 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@
 
 # Core support for EXYNOS4 system
 
-obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
@@ -30,6 +32,10 @@
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
 # device support
 
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 0000000..b9d5ef6
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKSRC_LCD1),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_LCD1),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+	/* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk		= {
+			.name		= "sclk_sata",
+			.id		= -1,
+			.enable		= exynos4_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_mout_corebus,
+		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.devname	= "exynos4-fb.1",
+			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+	},
+};
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "sataphy",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "sata",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "fimd",
+		.devname	= "exynos4-fb.1",
+		.enable		= exynos4_clk_ip_lcd1_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+	return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+	.suspend	= exynos4210_clock_suspend,
+	.resume		= exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+	int ptr;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+	clk_mout_mpll.reg_src.shift = 8;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 0000000..77d5dec
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+	.sources	= clk_src_mpll_user_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+	.clk = {
+		.name		= "mout_mpll_user",
+	},
+	.sources	= &clk_src_mpll_user,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+	/* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+	/* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+	return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+	.suspend	= exynos4212_clock_suspend,
+	.resume		= exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+	int ptr;
+
+	/* usbphy1 is removed */
+	clkset_group_list[4] = NULL;
+
+	/* mout_mpll_user is used */
+	clkset_group_list[6] = &clk_mout_mpll_user.clk;
+	clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+	clk_mout_mpll.reg_src.shift = 12;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 86964d2..0d59be3 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -20,26 +21,93 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
 
-static struct clk clk_sclk_hdmi27m = {
+static struct sleep_save exynos4_clock_save[] = {
+	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKSRC_TOP0),
+	SAVE_ITEM(S5P_CLKSRC_TOP1),
+	SAVE_ITEM(S5P_CLKSRC_CAM),
+	SAVE_ITEM(S5P_CLKSRC_TV),
+	SAVE_ITEM(S5P_CLKSRC_MFC),
+	SAVE_ITEM(S5P_CLKSRC_G3D),
+	SAVE_ITEM(S5P_CLKSRC_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_CAM),
+	SAVE_ITEM(S5P_CLKDIV_TV),
+	SAVE_ITEM(S5P_CLKDIV_MFC),
+	SAVE_ITEM(S5P_CLKDIV_G3D),
+	SAVE_ITEM(S5P_CLKDIV_LCD0),
+	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+	SAVE_ITEM(S5P_CLKDIV_FSYS0),
+	SAVE_ITEM(S5P_CLKDIV_FSYS1),
+	SAVE_ITEM(S5P_CLKDIV_FSYS2),
+	SAVE_ITEM(S5P_CLKDIV_FSYS3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL0),
+	SAVE_ITEM(S5P_CLKDIV_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_PERIL2),
+	SAVE_ITEM(S5P_CLKDIV_PERIL3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL4),
+	SAVE_ITEM(S5P_CLKDIV_PERIL5),
+	SAVE_ITEM(S5P_CLKDIV_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV2_RATIO),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_TV),
+	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+	SAVE_ITEM(S5P_CLKGATE_BLOCK),
+	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+	SAVE_ITEM(S5P_CLKSRC_DMC),
+	SAVE_ITEM(S5P_CLKDIV_DMC0),
+	SAVE_ITEM(S5P_CLKDIV_DMC1),
+	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+	SAVE_ITEM(S5P_CLKSRC_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
 	.name		= "sclk_hdmiphy",
 };
 
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
 	.name		= "sclk_usbphy0",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
@@ -58,12 +126,7 @@
 	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
 }
 
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
 }
@@ -103,12 +166,12 @@
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
 }
 
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
 }
 
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
 }
@@ -133,7 +196,7 @@
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
 };
 
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
 	.clk	= {
 		.name		= "sclk_apll",
 		.parent		= &clk_mout_apll.clk,
@@ -141,7 +204,7 @@
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
 };
 
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 	},
@@ -149,12 +212,13 @@
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
 };
 
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
 	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+	/* reg_src will be added in each SoCs' clock */
 };
 
 static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +288,12 @@
 
 /* Core list of CMU_CORE side */
 
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
 	.sources	= clkset_corebus_list,
 	.nr_sources	= ARRAY_SIZE(clkset_corebus_list),
 };
@@ -284,12 +348,12 @@
 
 /* Core list of CMU_TOP side */
 
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
 	.sources	= clkset_aclk_top_list,
 	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
 };
@@ -321,7 +385,7 @@
 	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
 };
 
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
 	.clk	= {
 		.name		= "aclk_133",
 	},
@@ -360,7 +424,7 @@
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
 };
 
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
 	.clk	= {
 		.name		= "sclk_vpll",
 	},
@@ -410,16 +474,6 @@
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sataphy",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
 		.name		= "hsmmc",
 		.devname	= "s3c-sdhci.0",
 		.parent		= &clk_aclk_133.clk,
@@ -449,11 +503,6 @@
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
-		.name		= "sata",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
 		.name		= "pdma",
 		.devname	= "s3c-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
@@ -673,7 +722,7 @@
 	}
 };
 
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
 	[2] = &clk_sclk_hdmi27m,
@@ -685,7 +734,7 @@
 	[8] = &clk_sclk_vpll.clk,
 };
 
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
 	.sources	= clkset_group_list,
 	.nr_sources	= ARRAY_SIZE(clkset_group_list),
 };
@@ -967,25 +1016,6 @@
 		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_sata",
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &clkset_mout_corebus,
-		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
 			.name		= "sclk_spi",
 			.devname	= "s3c64xx-spi.0",
 			.enable		= exynos4_clksrc_mask_peril1_ctrl,
@@ -1114,7 +1144,13 @@
 
 static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
 {
-	return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+	if (soc_is_exynos4210())
+		return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+	else
+		return 0;
 }
 
 static struct clk_ops exynos4_fout_apll_ops = {
@@ -1124,10 +1160,10 @@
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
+	unsigned long apll = 0;
+	unsigned long mpll = 0;
+	unsigned long epll = 0;
+	unsigned long vpll = 0;
 	unsigned long vpllsrc;
 	unsigned long xtal;
 	unsigned long armclk;
@@ -1151,14 +1187,29 @@
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
-	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
-				__raw_readl(S5P_EPLL_CON1), pll_4600);
+	if (soc_is_exynos4210()) {
+		apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+		mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+					pll_4508);
+		epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1), pll_4600);
 
-	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
-	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650c);
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1), pll_4650c);
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+		mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+		epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1));
+
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1));
+	} else {
+		/* nothing */
+	}
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
@@ -1193,6 +1244,28 @@
 	/* Nothing here yet */
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+	return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+	.suspend	= exynos4_clock_suspend,
+	.resume		= exynos4_clock_resume,
+};
+
 void __init exynos4_register_clocks(void)
 {
 	int ptr;
@@ -1208,5 +1281,6 @@
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	register_syscore_ops(&exynos4_clock_syscore_ops);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc..a348434 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
+unsigned int gic_bank_offset __read_mostly;
+
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -44,11 +46,6 @@
 		.length		= SZ_4K,
 		.type	 	= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
 		.length		= SZ_128K,
@@ -121,6 +118,24 @@
 	},
 };
 
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static void exynos4_idle(void)
 {
 	if (!need_resched())
@@ -143,6 +158,11 @@
 {
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
 	/* initialize device information early */
 	exynos4_default_sdhci0();
 	exynos4_default_sdhci1();
@@ -170,24 +190,37 @@
 
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		exynos4212_register_clocks();
+
 	exynos4_register_clocks();
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
 
 	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+			    (gic_bank_offset * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (gic_bank_offset * smp_processor_id());
 }
 
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
@@ -223,7 +256,11 @@
 {
 	/* TAG, Data Latency Control: 2cycle */
 	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
 	/* L2X0 Prefetch Control */
 	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 006a4f4..f5e9fd8 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
+		mov	\tmp, #0
+
+		mrc	p15, 0, \base, c0, c0, 5
+		and	\base, \base, #3
+		cmp	\base, #0
+		beq	1f
+
+		ldr	\tmp, =gic_bank_offset
+		ldr	\tmp, [\tmp]
+		cmp	\base, #1
+		beq	1f
+
+		cmp	\base, #2
+		addeq	\tmp, \tmp, \tmp
+		addne	\tmp, \tmp, \tmp, LSL #1
+
+1:		ldr	\base, =gic_cpu_base_addr
 		ldr	\base, [\base]
-		mrc     p15, 0, \tmp, c0, c0, 5
-		and     \tmp, \tmp, #3
-		cmp     \tmp, #1
-		addeq   \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+		add	\base, \base, \tmp
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 0000000..a07fcbf
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8..2d3f6bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
 
 #define IRQ_PPI(x)		S5P_IRQ(x+16)
 
+#define IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
+
 /* SPI: Shared Peripheral Interrupt */
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296d..9f97eb8 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
 
 #include <plat/map-s5p.h>
 
-#define EXYNOS4_PA_SYSRAM		0x02020000
+#define EXYNOS4_PA_SYSRAM0		0x02025000
+#define EXYNOS4_PA_SYSRAM1		0x02020000
 
 #define EXYNOS4_PA_FIMC0		0x11800000
 #define EXYNOS4_PA_FIMC1		0x11810000
@@ -61,7 +62,6 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET		0x8000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb..6c37ebe 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_REGS_CLOCK_H
 #define __ASM_ARCH_REGS_CLOCK_H __FILE__
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #define S5P_CLKREG(x)			(S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
 #define S5P_CLKSRC_G3D			S5P_CLKREG(0x0C22C)
 #define S5P_CLKSRC_IMAGE		S5P_CLKREG(0x0C230)
 #define S5P_CLKSRC_LCD0			S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
 #define S5P_CLKSRC_MAUDIO		S5P_CLKREG(0x0C23C)
 #define S5P_CLKSRC_FSYS			S5P_CLKREG(0x0C240)
 #define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x0C250)
 #define S5P_CLKSRC_PERIL1		S5P_CLKREG(0x0C254)
 
+#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
+
 #define S5P_CLKDIV_TOP			S5P_CLKREG(0x0C510)
 #define S5P_CLKDIV_CAM			S5P_CLKREG(0x0C520)
 #define S5P_CLKDIV_TV			S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
 #define S5P_CLKDIV_G3D			S5P_CLKREG(0x0C52C)
 #define S5P_CLKDIV_IMAGE		S5P_CLKREG(0x0C530)
 #define S5P_CLKDIV_LCD0			S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
 #define S5P_CLKDIV_MAUDIO		S5P_CLKREG(0x0C53C)
 #define S5P_CLKDIV_FSYS0		S5P_CLKREG(0x0C540)
 #define S5P_CLKDIV_FSYS1		S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
 #define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
 #define S5P_CLKDIV2_RATIO		S5P_CLKREG(0x0C580)
 
-#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
-
 #define S5P_CLKDIV_STAT_TOP		S5P_CLKREG(0x0C610)
 
 #define S5P_CLKGATE_SCLKCAM		S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
 #define S5P_CLKGATE_IP_TV		S5P_CLKREG(0x0C924)
 #define S5P_CLKGATE_IP_MFC		S5P_CLKREG(0x0C928)
 #define S5P_CLKGATE_IP_G3D		S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE		S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C930) : \
+					S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210	S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212	S5P_CLKREG(0x04930)
 #define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
 #define S5P_CLKGATE_IP_FSYS		S5P_CLKREG(0x0C940)
 #define S5P_CLKGATE_IP_GPS		S5P_CLKREG(0x0C94C)
 #define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR		S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C960) : \
+					S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210	S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212	S5P_CLKREG(0x08960)
 #define S5P_CLKGATE_BLOCK		S5P_CLKREG(0x0C970)
 
 #define S5P_CLKSRC_MASK_DMC		S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
 #define S5P_CLKGATE_IP_DMC		S5P_CLKREG(0x10900)
 
 #define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14004) :  \
+					S5P_CLKREG(0x10008))
 #define S5P_APLL_CON0			S5P_CLKREG(0x14100)
 #define S5P_APLL_CON1			S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0			S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1			S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14108) : \
+					S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x1410C) : \
+					S5P_CLKREG(0x1010C))
 
 #define S5P_CLKSRC_CPU			S5P_CLKREG(0x14200)
 #define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
 #define S5P_CLKDIV_BUS_GPLR_SHIFT	(4)
 #define S5P_CLKDIV_BUS_GPLR_MASK	(0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
 
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
+
 /* Compatibility defines and inclusion */
 
 #include <mach/regs-pmu.h>
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c843..80dd02a 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
 #define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
 #define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
 
-#define EXYNOS4_MCT_L0_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE		EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK		(0xffffff00)
 
 #define MCT_L_TCNTB_OFFSET		(0x00)
 #define MCT_L_ICNTB_OFFSET		(0x08)
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 0000000..b5f6f38
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ *		http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= EXYNOS4_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= origen_map_io,
+	.init_machine	= origen_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 0000000..fcf2e0e
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+	REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+	REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+	REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_SMDK4X12",
+		.min_uV		= 925000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+	{ MAX8997_BUCK1, &max8997_buck1_data },
+	{ MAX8997_BUCK2, &max8997_buck2_data },
+	{ MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+	.num_regulators	= ARRAY_SIZE(smdk4x12_max8997_regulators),
+	.regulators	= smdk4x12_max8997_regulators,
+
+	.buck1_voltage[0] = 1100000,	/* 1.1V */
+	.buck1_voltage[1] = 1100000,	/* 1.1V */
+	.buck1_voltage[2] = 1100000,	/* 1.1V */
+	.buck1_voltage[3] = 1100000,	/* 1.1V */
+	.buck1_voltage[4] = 1100000,	/* 1.1V */
+	.buck1_voltage[5] = 1100000,	/* 1.1V */
+	.buck1_voltage[6] = 1000000,	/* 1.0V */
+	.buck1_voltage[7] = 950000,	/* 0.95V */
+
+	.buck2_voltage[0] = 1100000,	/* 1.1V */
+	.buck2_voltage[1] = 1000000,	/* 1.0V */
+	.buck2_voltage[2] = 950000,	/* 0.95V */
+	.buck2_voltage[3] = 900000,	/* 0.9V */
+	.buck2_voltage[4] = 1100000,	/* 1.1V */
+	.buck2_voltage[5] = 1000000,	/* 1.0V */
+	.buck2_voltage[6] = 950000,	/* 0.95V */
+	.buck2_voltage[7] = 900000,	/* 0.9V */
+
+	.buck5_voltage[0] = 1100000,	/* 1.1V */
+	.buck5_voltage[1] = 1100000,	/* 1.1V */
+	.buck5_voltage[2] = 1100000,	/* 1.1V */
+	.buck5_voltage[3] = 1100000,	/* 1.1V */
+	.buck5_voltage[4] = 1100000,	/* 1.1V */
+	.buck5_voltage[5] = 1100000,	/* 1.1V */
+	.buck5_voltage[6] = 1100000,	/* 1.1V */
+	.buck5_voltage[7] = 1100000,	/* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", 0x66),
+		.platform_data	= &smdk4x12_max8997_pdata,
+	}
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+	.keymap		= smdk4x12_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+	.keymap_data	= &smdk4x12_keymap_data,
+	.rows		= 2,
+	.cols		= 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c3,
+	&s3c_device_i2c7,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+	clk_xusbxti.rate = 24000000;
+
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
+	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, smdk4x12_i2c_devs0,
+				ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, smdk4x12_i2c_devs1,
+				ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+	s3c_i2c3_set_platdata(NULL);
+	i2c_register_board_info(3, smdk4x12_i2c_devs3,
+				ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+	s3c_i2c7_set_platdata(NULL);
+	i2c_register_board_info(7, smdk4x12_i2c_devs7,
+				ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 582b874..f191608 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,19 +20,31 @@
 #include <linux/delay.h>
 #include <linux/percpu.h>
 
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
 #include <mach/map.h>
+#include <mach/irqs.h>
 #include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+enum {
+	MCT_INT_SPI,
+	MCT_INT_PPI
+};
+
 static unsigned long clk_cnt_per_tick;
 static unsigned long clk_rate;
+static unsigned int mct_int_type;
 
 struct mct_clock_event_device {
 	struct clock_event_device *evt;
 	void __iomem *base;
+	char name[10];
 };
 
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
 
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
@@ -42,57 +54,53 @@
 
 	__raw_writel(value, addr);
 
-	switch ((u32) addr) {
-	case (u32) EXYNOS4_MCT_G_TCON:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 16;		/* G_TCON write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_L:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 0;		/* G_COMP0_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_U:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 1;		/* G_COMP0_U write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 2;		/* G_COMP0_ADD_INCR write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_L:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 0;		/* G_CNT_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_U:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 1;		/* G_CNT_U write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L0_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L1_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L0_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L1_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L0_ICNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L1_ICNTB write status */
-		break;
-	default:
-		return;
+	if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+		u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+		switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+		case (u32) MCT_L_TCON_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 3;		/* L_TCON write status */
+			break;
+		case (u32) MCT_L_ICNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 1;		/* L_ICNTB write status */
+			break;
+		case (u32) MCT_L_TCNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 0;		/* L_TCNTB write status */
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch ((u32) addr) {
+		case (u32) EXYNOS4_MCT_G_TCON:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 16;		/* G_TCON write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_L:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 0;		/* G_COMP0_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_U:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 1;		/* G_COMP0_U write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_L:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 0;		/* G_CNT_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_U:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 1;		/* G_CNT_U write status */
+			break;
+		default:
+			return;
+		}
 	}
 
 	/* Wait maximum 1 ms until written values are applied */
@@ -321,9 +329,8 @@
 	}
 }
 
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
-	struct mct_clock_event_device *mevt = dev_id;
 	struct clock_event_device *evt = mevt->evt;
 
 	/*
@@ -335,7 +342,20 @@
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+	if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+	struct mct_clock_event_device *mevt = dev_id;
+	struct clock_event_device *evt = mevt->evt;
+
+	exynos4_mct_tick_clear(mevt);
 
 	evt->event_handler(evt);
 
@@ -360,14 +380,10 @@
 
 	mct_tick[cpu].evt = evt;
 
-	if (cpu == 0) {
-		mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
-		evt->name = "mct_tick0";
-	} else {
-		mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
-		evt->name = "mct_tick1";
-	}
+	mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+	sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
 
+	evt->name = mct_tick[cpu].name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
 	evt->set_mode = exynos4_tick_set_mode;
@@ -384,15 +400,19 @@
 
 	exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
 
-	if (cpu == 0) {
-		mct_tick0_event_irq.dev_id = &mct_tick[cpu];
-		evt->irq = IRQ_MCT_L0;
-		setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+	if (mct_int_type == MCT_INT_SPI) {
+		if (cpu == 0) {
+			mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+			evt->irq = IRQ_MCT_L0;
+			setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+		} else {
+			mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+			evt->irq = IRQ_MCT_L1;
+			setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+			irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		}
 	} else {
-		mct_tick1_event_irq.dev_id = &mct_tick[cpu];
-		evt->irq = IRQ_MCT_L1;
-		setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
-		irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		gic_enable_ppi(IRQ_MCT_LOCALTIMER);
 	}
 }
 
@@ -422,6 +442,11 @@
 
 static void __init exynos4_timer_init(void)
 {
+	if (soc_is_exynos4210())
+		mct_int_type = MCT_INT_SPI;
+	else
+		mct_int_type = MCT_INT_PPI;
+
 	exynos4_timer_resources();
 	exynos4_clocksource_init();
 	exynos4_clockevent_init();
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index 0c90896..782dcf1 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,13 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+				S5P_INFORM5 : S5P_VA_SYSRAM)
 
 /*
  * control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@
 static void __cpuinit exynos4_gic_secondary_init(void)
 {
 	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				 (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	int i;
 
 	/*
@@ -216,5 +220,6 @@
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
 	 */
-	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+			CPU1_BOOT_REG);
 }
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca94..62e4f43 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@
 	{ .reg = S5P_CLKSRC_MASK_CAM			, .val = 0x11111111, },
 	{ .reg = S5P_CLKSRC_MASK_TV			, .val = 0x00000111, },
 	{ .reg = S5P_CLKSRC_MASK_LCD0			, .val = 0x00001111, },
-	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
 	{ .reg = S5P_CLKSRC_MASK_MAUDIO			, .val = 0x00000001, },
 	{ .reg = S5P_CLKSRC_MASK_FSYS			, .val = 0x01011111, },
 	{ .reg = S5P_CLKSRC_MASK_PERIL0			, .val = 0x01111111, },
@@ -49,6 +48,10 @@
 	{ .reg = S5P_CLKSRC_MASK_DMC			, .val = 0x00010000, },
 };
 
+static struct sleep_save exynos4210_set_clksrc[] = {
+	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
+};
+
 static struct sleep_save exynos4_epll_save[] = {
 	SAVE_ITEM(S5P_EPLL_CON0),
 	SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@
 };
 
 static struct sleep_save exynos4_core_save[] = {
-	/* CMU side */
-	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
-	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKSRC_TOP0),
-	SAVE_ITEM(S5P_CLKSRC_TOP1),
-	SAVE_ITEM(S5P_CLKSRC_CAM),
-	SAVE_ITEM(S5P_CLKSRC_TV),
-	SAVE_ITEM(S5P_CLKSRC_MFC),
-	SAVE_ITEM(S5P_CLKSRC_G3D),
-	SAVE_ITEM(S5P_CLKSRC_IMAGE),
-	SAVE_ITEM(S5P_CLKSRC_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_CAM),
-	SAVE_ITEM(S5P_CLKDIV_TV),
-	SAVE_ITEM(S5P_CLKDIV_MFC),
-	SAVE_ITEM(S5P_CLKDIV_G3D),
-	SAVE_ITEM(S5P_CLKDIV_IMAGE),
-	SAVE_ITEM(S5P_CLKDIV_LCD0),
-	SAVE_ITEM(S5P_CLKDIV_LCD1),
-	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
-	SAVE_ITEM(S5P_CLKDIV_FSYS0),
-	SAVE_ITEM(S5P_CLKDIV_FSYS1),
-	SAVE_ITEM(S5P_CLKDIV_FSYS2),
-	SAVE_ITEM(S5P_CLKDIV_FSYS3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL0),
-	SAVE_ITEM(S5P_CLKDIV_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_PERIL2),
-	SAVE_ITEM(S5P_CLKDIV_PERIL3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL4),
-	SAVE_ITEM(S5P_CLKDIV_PERIL5),
-	SAVE_ITEM(S5P_CLKDIV_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV2_RATIO),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_TV),
-	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
-	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
-	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
-	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
-	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
-	SAVE_ITEM(S5P_CLKGATE_BLOCK),
-	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
-	SAVE_ITEM(S5P_CLKSRC_DMC),
-	SAVE_ITEM(S5P_CLKDIV_DMC0),
-	SAVE_ITEM(S5P_CLKDIV_DMC1),
-	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
-	SAVE_ITEM(S5P_CLKSRC_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
-	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
 	/* GIC side */
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@
 
 	s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
 
+	if (soc_is_exynos4210())
+		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
 }
 
 static int exynos4_pm_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 6f991c5..fd5e7b6 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,6 +179,25 @@
 		"High Speed" UART is n/c (as far as I can tell)
 		20 Pin ARM/Xscale JTAG interface on J2
 
+config MACH_DEVIXP
+	bool "Omicron DEVIXP"
+	help
+	  Say 'Y' here if you want your kernel to support the DEVIXP
+	  board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+	bool "Omicron MICCPT"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the MICCPT
+	  board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+	bool "Omicron MIC256"
+	help
+	  Say 'Y' here if you want your kernel to support the MIC256
+	  board from OMICRON electronics GmbH.
+
 comment "IXP4xx Options"
 
 config IXP4XX_INDIRECT_PCI
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index d807fc3..eded94c 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,6 +10,7 @@
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_MICCPT)		+= miccpt-pci.o
 obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-pci.o
 obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
@@ -25,6 +26,9 @@
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
+obj-$(CONFIG_MACH_DEVIXP)	+= omixp-setup.o
+obj-$(CONFIG_MACH_MICCPT)	+= omixp-setup.o
+obj-$(CONFIG_MACH_MIC256)	+= omixp-setup.o
 obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o
 obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
 obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 219d7c1..eb945a9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -41,7 +41,8 @@
 	 * Some boards are using UART2 as console
 	 */
 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-			 machine_is_gateway7001() || machine_is_wg302v2())
+	    machine_is_gateway7001() || machine_is_wg302v2() ||
+	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 0000000..ca0bae7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV		4
+#define IRQ_LINES	4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		1
+#define INTB		2
+#define INTC		3
+#define INTD		4
+
+
+void __init miccpt_pci_preinit(void)
+{
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTD)
+	};
+
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % 4];
+
+	return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= miccpt_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+	if (machine_is_miccpt())
+		pci_common_init(&miccpt_pci);
+	return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
new file mode 100644
index 0000000..3b6a81a6
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-ixp4xx/omixp-setup.c
+ *
+ * omicron ixp4xx board setup
+ *      Copyright (C) 2009 OMICRON electronics GmbH
+ *
+ * based nslu2-setup.c, ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_LEDS_CLASS
+#include <linux/leds.h>
+#endif
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct resource omixp_flash_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition omixp_partitions[] = {
+	{
+		.name =		"Recovery Bootloader",
+		.size =		0x00020000,
+		.offset =	0,
+	}, {
+		.name =		"Calibration Data",
+		.size =		0x00020000,
+		.offset =	0x00020000,
+	}, {
+		.name =		"Recovery FPGA",
+		.size =		0x00020000,
+		.offset =	0x00040000,
+	}, {
+		.name =		"Release Bootloader",
+		.size =		0x00020000,
+		.offset =	0x00060000,
+	}, {
+		.name =		"Release FPGA",
+		.size =		0x00020000,
+		.offset =	0x00080000,
+	}, {
+		.name =		"Kernel",
+		.size =		0x00160000,
+		.offset =	0x000a0000,
+	}, {
+		.name =		"Filesystem",
+		.size =		0x00C00000,
+		.offset =	0x00200000,
+	}, {
+		.name =		"Persistent Storage",
+		.size =		0x00200000,
+		.offset =	0x00E00000,
+	},
+};
+
+static struct flash_platform_data omixp_flash_data[] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= omixp_partitions,
+		.nr_parts	= ARRAY_SIZE(omixp_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	},
+};
+
+static struct platform_device omixp_flash_device[] = {
+	{
+		.name		= "IXP4XX-Flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &omixp_flash_data[0],
+		},
+		.resource = &omixp_flash_resources[0],
+		.num_resources = 1,
+	}, {
+		.name		= "IXP4XX-Flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &omixp_flash_data[1],
+		},
+		.resource = &omixp_flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
+/* Swap UART's - These boards have the console on UART2. The following
+ * configuration is used:
+ *      ttyS0 .. UART2
+ *      ttyS1 .. UART1
+ * This way standard images can be used with the kernel that expect
+ * the console on ttyS0.
+ */
+static struct resource omixp_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct plat_serial8250_port omixp_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	}, {
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	}, {
+		/* list termination */
+	}
+};
+
+static struct platform_device omixp_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= omixp_uart_data,
+	.num_resources		= 2,
+	.resource		= omixp_uart_resources,
+};
+
+static struct gpio_led mic256_led_pins[] = {
+	{
+		.name		= "LED-A",
+		.gpio		= 7,
+	},
+};
+
+static struct gpio_led_platform_data mic256_led_data = {
+	.num_leds		= ARRAY_SIZE(mic256_led_pins),
+	.leds			= mic256_led_pins,
+};
+
+static struct platform_device mic256_leds = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &mic256_led_data,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	},
+};
+
+static struct platform_device ixdp425_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= ixdp425_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= ixdp425_plat_eth + 1,
+	},
+};
+
+
+static struct platform_device *devixp_pldev[] __initdata = {
+	&omixp_uart,
+	&omixp_flash_device[0],
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
+};
+
+static struct platform_device *mic256_pldev[] __initdata = {
+	&omixp_uart,
+	&omixp_flash_device[0],
+	&mic256_leds,
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
+};
+
+static struct platform_device *miccpt_pldev[] __initdata = {
+	&omixp_uart,
+	&omixp_flash_device[0],
+	&omixp_flash_device[1],
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
+};
+
+static void __init omixp_init(void)
+{
+	ixp4xx_sys_init();
+
+	/* 16MiB Boot Flash */
+	omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
+	omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
+
+	/* 32 MiB Data Flash */
+	omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+	omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
+
+	if (machine_is_devixp())
+		platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
+	else if (machine_is_miccpt())
+		platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
+	else if (machine_is_mic256())
+		platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
+}
+
+#ifdef CONFIG_MACH_DEVIXP
+MACHINE_START(DEVIXP, "Omicron DEVIXP")
+	.atag_offset    = 0x100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= omixp_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICCPT
+MACHINE_START(MICCPT, "Omicron MICCPT")
+	.atag_offset    = 0x100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= omixp_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MIC256
+MACHINE_START(MIC256, "Omicron MIC256")
+	.atag_offset    = 0x100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= omixp_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231..ea5ec0f 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -64,8 +64,25 @@
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_PWM
 
+config MODULE_M28
+	bool
+	select SOC_IMX28
+	select LEDS_GPIO_REGISTER
+	select MXS_HAVE_AMBA_DUART
+	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_FEC
+	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_MMC
+	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_OCOTP
+
 config MACH_TX28
 	bool "Ka-Ro TX28 module"
 	select MODULE_TX28
 
+config MACH_M28EVK
+	bool "Support DENX M28EVK Platform"
+	select MODULE_M28
+
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index ea8dcb7..8c93b24 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -10,6 +10,7 @@
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
 obj-$(CONFIG_MODULE_TX28) += module-tx28.o
 obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
 
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index ba53227..7fa1ac4 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -738,11 +738,17 @@
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
 
-	/* Extra fec clock setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-	reg &= ~BM_CLKCTRL_ENET_SLEEP;
-	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	/*
+	 * Extra fec clock setting
+	 * The DENX M28 uses an external clock source
+	 * and the clock output must not be enabled
+	 */
+	if (!machine_is_m28evk()) {
+		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+		reg &= ~BM_CLKCTRL_ENET_SLEEP;
+		reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	}
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 5aa5f75..0d2d2b4 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -33,6 +33,7 @@
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\
+		machine_is_m28evk() ||					\
 		machine_is_tx28() ||					\
 		0)
 
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 7f8bf65..6777674 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@
 		mxs_duart_base = MX23_DUART_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX28EVK:
+	case MACH_TYPE_M28EVK:
 	case MACH_TYPE_TX28:
 		mxs_duart_base = MX28_DUART_BASE_ADDR;
 		break;
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
new file mode 100644
index 0000000..3b1681e
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+	/* duart */
+	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+	/* auart0 */
+	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+	/* auart3 */
+	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+	/* fec0 */
+	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+	/* fec1 */
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+	/* flexcan0 */
+	MX28_PAD_GPMI_RDY2__CAN0_TX,
+	MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+	/* flexcan1 */
+	MX28_PAD_GPMI_CE2N__CAN1_TX,
+	MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL,
+	MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+	/* mxsfb (lcdif) */
+	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
+	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+	/* mmc0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* mmc1 */
+	MX28_PAD_GPMI_D00__SSP1_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D01__SSP1_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D02__SSP1_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D03__SSP1_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D04__SSP1_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D05__SSP1_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D06__SSP1_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D07__SSP1_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY1__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_WRN__SSP1_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* led */
+	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+	/* nand */
+	MX28_PAD_GPMI_D00__GPMI_D0 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D01__GPMI_D1 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D02__GPMI_D2 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D03__GPMI_D3 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D04__GPMI_D4 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D05__GPMI_D5 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D06__GPMI_D6 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D07__GPMI_D7 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_RDN__GPMI_RDN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_WRN__GPMI_WRN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_ALE__GPMI_ALE |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_CLE__GPMI_CLE |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+	/* Backlight */
+	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+	{
+		.name = "user-led1",
+		.default_trigger = "heartbeat",
+		.gpio = M28EVK_GPIO_USERLED1,
+	},
+	{
+		.name = "user-led2",
+		.default_trigger = "heartbeat",
+		.gpio = M28EVK_GPIO_USERLED2,
+	},
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+	.leds = m28evk_leds,
+	.num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+	{
+		/* fec0 */
+		.phy = PHY_INTERFACE_MODE_RMII,
+	}, {
+		/* fec1 */
+		.phy = PHY_INTERFACE_MODE_RMII,
+	},
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+	int i;
+	u32 val;
+	const u32 *ocotp = mxs_get_ocotp();
+
+	if (!ocotp) {
+		pr_err("%s: timeout when reading fec mac from OCOTP\n",
+			__func__);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * OCOTP only stores the last 4 octets for each mac address,
+	 * so hard-code DENX OUI (C0:E5:4E) here.
+	 */
+	for (i = 0; i < 2; i++) {
+		val = ocotp[i * 4];
+		mx28_fec_pdata[i].mac[0] = 0xC0;
+		mx28_fec_pdata[i].mac[1] = 0xE5;
+		mx28_fec_pdata[i].mac[2] = 0x4E;
+		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+	}
+
+	return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+	{
+		.name		= "Ampire AM-800480R2TMQW-T01H",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 30066, /* picosecond (33.26 MHz) */
+		.left_margin	= 0,
+		.right_margin	= 256,
+		.upper_margin	= 0,
+		.lower_margin	= 45,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
+	},
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+	.mode_list	= m28evk_video_modes,
+	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
+	.default_bpp	= 16,
+	.ld_intf_width	= STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+	.byte_len = 16384,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+	{
+		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
+		.platform_data = &m28evk_eeprom,
+	},
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+	{
+		/* mmc0 */
+		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	}, {
+		/* mmc1 */
+		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	},
+};
+
+static void __init m28evk_init(void)
+{
+	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+	mx28_add_duart();
+	mx28_add_auart0();
+	mx28_add_auart3();
+
+	if (!m28evk_fec_get_mac()) {
+		mx28_add_fec(0, &mx28_fec_pdata[0]);
+		mx28_add_fec(1, &mx28_fec_pdata[1]);
+	}
+
+	mx28_add_flexcan(0, NULL);
+	mx28_add_flexcan(1, NULL);
+
+	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+	gpio_led_register_device(0, &m28evk_led_data);
+
+	/* I2C */
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+	mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+	.init	= m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+	.map_io		= mx28_map_io,
+	.init_irq	= mx28_init_irq,
+	.init_machine	= m28evk_init,
+	.timer		= &m28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 8dc0576..c704783 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -44,16 +44,16 @@
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x36400000,
-		.idmask		= 0xfffff000,
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
 		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c6400_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
 	}, {
-		.idcode		= 0x36410100,
-		.idmask		= 0xffffff00,
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
 		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c6410_init_uarts,
@@ -141,23 +141,15 @@
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 	iotable_init(mach_desc, size);
 	init_consistent_dma_size(SZ_8M);
 
-	idcode = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!idcode) {
-		/* S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read. */
+	/* detect cpu id */
+	s3c64xx_init_cpu();
 
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
-
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
 
 static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e8..1fd9c79 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
 #include <mach/regs-clock.h>
 #include <mach/spi-clocks.h>
 
+#include <plat/cpu.h>
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
 
@@ -185,11 +186,8 @@
 
 void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
 {
-	unsigned int id;
 	struct s3c64xx_spi_info *pd;
 
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
 	/* Reject invalid configuration */
 	if (!num_cs || src_clk_nr < 0
 			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@
 
 	switch (cntrlr) {
 	case 0:
-		if (id == 0x50000)
+		if (soc_is_s5p6450())
 			pd = &s5p6450_spi0_pdata;
 		else
 			pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@
 		s5p64x0_device_spi0.dev.platform_data = pd;
 		break;
 	case 1:
-		if (id == 0x50000)
+		if (soc_is_s5p6450())
 			pd = &s5p6450_spi1_pdata;
 		else
 			pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944..0e5b3e6 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
 
+#include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/s3c-pl330-pdata.h>
 
@@ -133,11 +134,7 @@
 
 static int __init s5p64x0_dma_init(void)
 {
-	unsigned int id;
-
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
-	if (id == 0x50000)
+	if (soc_is_s5p6450())
 		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b0..700dac6 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <plat/cpu.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@
 
 static int __init s5p64x0_gpiolib_init(void)
 {
-	unsigned int chipid;
-
-	chipid = __raw_readl(S5P64X0_SYS_ID);
-
 	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
 				ARRAY_SIZE(s5p64x0_gpio_cfgs));
 
-	if ((chipid & 0xff000) == 0x50000) {
+	if (soc_is_s5p6450()) {
 		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
 					ARRAY_SIZE(s5p6450_gpio_2bit));
 
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index fe7380f..494e1a8 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <plat/cpu.h>
 #include <plat/regs-irqtype.h>
 #include <plat/gpio-cfg.h>
 
@@ -67,7 +68,7 @@
 	__raw_writel(ctrl, S5P64X0_EINT0CON0);
 
 	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
-	if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+	if (soc_is_s5p6450())
 		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
 	else
 		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 93c793f..f0bdc5e 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -49,7 +49,8 @@
 		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
 		.mapbase	= TEGRA_UARTD_BASE,
 		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -117,6 +118,7 @@
 	&tegra_sdhci_device1,
 	&tegra_sdhci_device2,
 	&tegra_sdhci_device4,
+	&tegra_ehci3_device,
 	&tegra_i2s_device1,
 	&tegra_das_device,
 	&tegra_pcm_device,
@@ -140,6 +142,7 @@
 	{ "pll_a_out0",	"pll_a",	11289600,	true },
 	{ "cdev1",	NULL,		0,		true },
 	{ "i2s1",	"pll_a_out0",	11289600,	false},
+	{ "usb3",	"clk_m",	12000000,	true },
 	{ NULL,		NULL,		0,		0},
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..2225769 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -145,6 +145,9 @@
 	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
 	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
 	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
+	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
+	{ .gpio = TEGRA_WIFI_RST,	.enable = true },
+	{ .gpio = TEGRA_WIFI_LED,	.enable = true },
 };
 
 void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index fbc9e0e..55c55ba 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -26,6 +26,8 @@
 #include <linux/pda_power.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/rfkill-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,7 +37,6 @@
 #include <mach/iomap.h>
 #include <mach/irqs.h>
 #include <mach/sdhci.h>
-#include <mach/gpio.h>
 
 #include "board.h"
 #include "board-paz00.h"
@@ -45,10 +46,22 @@
 
 static struct plat_serial8250_port debug_uart_platform_data[] = {
 	{
+		/* serial port on JP1 */
+		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
+		.mapbase	= TEGRA_UARTA_BASE,
+		.irq		= INT_UARTA,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 216000000,
+	}, {
+		/* serial port on mini-pcie */
 		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
 		.mapbase	= TEGRA_UARTD_BASE,
 		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -65,10 +78,48 @@
 	},
 };
 
+static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
+	.name		= "wifi_rfkill",
+	.reset_gpio	= TEGRA_WIFI_RST,
+	.shutdown_gpio	= TEGRA_WIFI_PWRN,
+	.type	= RFKILL_TYPE_WLAN,
+};
+
+static struct platform_device wifi_rfkill_device = {
+	.name	= "rfkill_gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wifi_rfkill_platform_data,
+	},
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "wifi-led",
+		.default_trigger	= "rfkill0",
+		.gpio			= TEGRA_WIFI_LED,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &gpio_led_info,
+        },
+};
+
 static struct platform_device *paz00_devices[] __initdata = {
 	&debug_uart,
-	&tegra_sdhci_device1,
 	&tegra_sdhci_device4,
+	&tegra_sdhci_device1,
+	&wifi_rfkill_device,
+	&leds_gpio,
 };
 
 static void paz00_i2c_init(void)
@@ -94,7 +145,14 @@
 
 static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	/* name		parent		rate		enabled */
+	{ "uarta",	"pll_p",	216000000,	true },
 	{ "uartd",	"pll_p",	216000000,	true },
+
+	{ "pll_p_out4",	"pll_p",	24000000,	true },
+	{ "usbd",	"clk_m",	12000000,	false },
+	{ "usb2",	"clk_m",	12000000,	false },
+	{ "usb3",	"clk_m",	12000000,	false },
+
 	{ NULL,		NULL,		0,		0},
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index 42ce863..8aff06e 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -19,11 +19,19 @@
 
 #include <mach/gpio-tegra.h>
 
+/* SDCARD */
 #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
 #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
 #define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+
+/* ULPI */
 #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
 
+/* WIFI */
+#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
+#define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
+#define TEGRA_WIFI_LED			TEGRA_GPIO_PD0
+
 void paz00_pinmux_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495..74f78b7 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -49,7 +49,7 @@
 	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
@@ -133,7 +133,7 @@
 	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -167,6 +167,8 @@
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
+	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
+	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
 };
 
 void __init seaboard_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 9e98ac7..bf13ea3 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -25,9 +25,12 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 
+#include <sound/wm8903.h>
+
 #include <mach/iomap.h>
 #include <mach/irqs.h>
 #include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,7 +44,8 @@
 static struct plat_serial8250_port debug_uart_platform_data[] = {
 	{
 		/* Memory and IRQ filled in before registration */
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -62,6 +66,12 @@
 	/* name		parent		rate		enabled */
 	{ "uartb",	"pll_p",	216000000,	true},
 	{ "uartd",	"pll_p",	216000000,	true},
+	{ "pll_a",	"pll_p_out1",	56448000,	true },
+	{ "pll_a_out0",	"pll_a",	11289600,	true },
+	{ "cdev1",	NULL,		0,		true },
+	{ "i2s1",	"pll_a_out0",	11289600,	false},
+	{ "usbd",	"clk_m",	12000000,	true},
+	{ "usb3",	"clk_m",	12000000,	true},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -117,6 +127,22 @@
 	.is_8bit	= 1,
 };
 
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
+	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
+	.gpio_hp_mute		= -1,
+	.gpio_int_mic_en	= -1,
+	.gpio_ext_mic_en	= -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+	.name	= "tegra-snd-wm8903",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &seaboard_audio_pdata,
+	},
+};
+
 static struct platform_device *seaboard_devices[] __initdata = {
 	&debug_uart,
 	&tegra_pmu_device,
@@ -124,6 +150,10 @@
 	&tegra_sdhci_device3,
 	&tegra_sdhci_device1,
 	&seaboard_gpio_keys_device,
+	&tegra_i2s_device1,
+	&tegra_das_device,
+	&tegra_pcm_device,
+	&seaboard_audio_device,
 };
 
 static struct i2c_board_info __initdata isl29018_device = {
@@ -135,12 +165,56 @@
 	I2C_BOARD_INFO("adt7461", 0x4c),
 };
 
+static struct wm8903_platform_data wm8903_pdata = {
+	.irq_active_low = 0,
+	.micdet_cfg = 0,
+	.micdet_delay = 100,
+	.gpio_base = SEABOARD_GPIO_WM8903(0),
+	.gpio_cfg = {
+		WM8903_GPIO_NO_CONFIG,
+		WM8903_GPIO_NO_CONFIG,
+		0,
+		WM8903_GPIO_NO_CONFIG,
+		WM8903_GPIO_NO_CONFIG,
+	},
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+	I2C_BOARD_INFO("wm8903", 0x1a),
+	.platform_data = &wm8903_pdata,
+	.irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
+static int seaboard_ehci_init(void)
+{
+	int gpio_status;
+
+	gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
+	if (gpio_status < 0) {
+		pr_err("VBUS_USB1 request GPIO FAILED\n");
+		WARN_ON(1);
+	}
+
+	gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
+	if (gpio_status < 0) {
+		pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
+		WARN_ON(1);
+	}
+	gpio_set_value(TEGRA_GPIO_USB1, 1);
+
+	platform_device_register(&tegra_ehci1_device);
+	platform_device_register(&tegra_ehci3_device);
+
+	return 0;
+}
+
 static void __init seaboard_i2c_init(void)
 {
 	gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
 	gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
 
 	i2c_register_board_info(0, &isl29018_device, 1);
+	i2c_register_board_info(0, &wm8903_device, 1);
 
 	i2c_register_board_info(3, &adt7461_device, 1);
 
@@ -161,6 +235,8 @@
 	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
 
 	platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
+
+	seaboard_ehci_init();
 }
 
 static void __init tegra_seaboard_init(void)
@@ -182,6 +258,9 @@
 	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
 	debug_uart_platform_data[0].irq = INT_UARTB;
 
+	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+	tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
 	seaboard_common_init();
 
 	seaboard_i2c_init();
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index 15b6c57..4c45d4c 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -19,6 +19,9 @@
 
 #include <mach/gpio-tegra.h>
 
+#define SEABOARD_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_)	(SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
 #define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
 #define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1
 #define TEGRA_GPIO_SD2_POWER		TEGRA_GPIO_PI6
@@ -33,10 +36,11 @@
 #define TEGRA_GPIO_MAGNETOMETER		TEGRA_GPIO_PN5
 #define TEGRA_GPIO_ISL29018_IRQ		TEGRA_GPIO_PZ2
 #define TEGRA_GPIO_AC_ONLINE		TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE			TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR		(TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR		SEABOARD_GPIO_TPS6586X(2)
+#define TEGRA_GPIO_CDC_IRQ		TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN		SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE		TEGRA_GPIO_PA5
 
 void seaboard_pinmux_init(void);
 
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index e3d9ec2f..1a6617b 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -32,7 +32,6 @@
 
 #include <mach/iomap.h>
 #include <mach/sdhci.h>
-#include <mach/gpio.h>
 
 #include "board.h"
 #include "clock.h"
@@ -46,7 +45,8 @@
 		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
 		.mapbase	= TEGRA_UARTA_BASE,
 		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6..3c63353 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,18 @@
 
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode = 0x0;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 
 	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		idcode = s3c24xx_read_idcode_v5();
+		samsung_cpu_id = s3c24xx_read_idcode_v5();
 	} else {
-		idcode = s3c24xx_read_idcode_v4();
+		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
+	s3c24xx_init_cpu();
 
 	arm_pm_restart = s3c24xx_pm_restart;
 
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7..7b0a28f 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,48 +33,66 @@
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x56440100,
-		.idmask		= 0xfffff000,
+		.idcode		= S5P6440_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
-		.idcode		= 0x36450000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5P6450_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
 		.map_io		= s5p6450_map_io,
 		.init_clocks	= s5p6450_init_clocks,
 		.init_uarts	= s5p6450_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6450,
 	}, {
-		.idcode		= 0x43100000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5PC100_CPU_ID,
+		.idmask		= S5PC100_CPU_MASK,
 		.map_io		= s5pc100_map_io,
 		.init_clocks	= s5pc100_init_clocks,
 		.init_uarts	= s5pc100_init_uarts,
 		.init		= s5pc100_init,
 		.name		= name_s5pc100,
 	}, {
-		.idcode		= 0x43110000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5PV210_CPU_ID,
+		.idmask		= S5PV210_CPU_MASK,
 		.map_io		= s5pv210_map_io,
 		.init_clocks	= s5pv210_init_clocks,
 		.init_uarts	= s5pv210_init_uarts,
 		.init		= s5pv210_init,
 		.name		= name_s5pv210,
 	}, {
-		.idcode		= 0x43210000,
-		.idmask		= 0xfffe0000,
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos4_init,
 		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos4_init,
+		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos4_init,
+		.name		= name_exynos4412,
 	},
 };
 
@@ -114,13 +132,13 @@
 void __init s5p_init_io(struct map_desc *mach_desc,
 			int size, void __iomem *cpuid_addr)
 {
-	unsigned long idcode;
-
 	/* initialize the io descriptors we need for initialization */
 	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
 	if (mach_desc)
 		iotable_init(mach_desc, size);
 
-	idcode = __raw_readl(cpuid_addr);
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	/* detect cpu id and rev. */
+	s5p_init_cpu(cpuid_addr);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab..f680a14 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,10 +14,11 @@
 
 extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
 extern void exynos4_setup_clocks(void);
 
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
 extern  int exynos4_init(void);
 extern void exynos4_init_irq(void);
 extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index ebc142c..3e21b94 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
  * published by the Free Software Foundation.
 */
 
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK	(0x3FF)
+#define PLL35XX_PDIV_MASK	(0x3F)
+#define PLL35XX_SDIV_MASK	(0x7)
+#define PLL35XX_MDIV_SHIFT	(16)
+#define PLL35XX_PDIV_SHIFT	(8)
+#define PLL35XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK	(0xFFFF)
+#define PLL36XX_MDIV_MASK	(0x1FF)
+#define PLL36XX_PDIV_MASK	(0x3F)
+#define PLL36XX_SDIV_MASK	(0x7)
+#define PLL36XX_MDIV_SHIFT	(16)
+#define PLL36XX_PDIV_SHIFT	(8)
+#define PLL36XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
 #define PLL45XX_MDIV_MASK	(0x3FF)
 #define PLL45XX_PDIV_MASK	(0x3F)
 #define PLL45XX_SDIV_MASK	(0x7)
@@ -19,8 +72,6 @@
 #define PLL45XX_PDIV_SHIFT	(8)
 #define PLL45XX_SDIV_SHIFT	(0)
 
-#include <asm/div64.h>
-
 enum pll45xx_type_t {
 	pll_4500,
 	pll_4502,
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 11059223..09adb84 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@
 
 # Objects we always build independent of SoC choice
 
-obj-y				+= init.o
+obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 0000000..81c06d4
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+	return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+	/* nothing here yet */
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!samsung_cpu_id) {
+		/*
+		 * S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read.
+		 */
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741..54f370f 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
 /* linux/arch/arm/plat-samsung/include/plat/cpu.h
  *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,108 @@
 #ifndef __SAMSUNG_PLAT_CPU_H
 #define __SAMSUNG_PLAT_CPU_H
 
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID		0x32400000
+#define S3C24XX_CPU_MASK	0xFFF00000
+
+#define S3C6400_CPU_ID		0x36400000
+#define S3C6410_CPU_ID		0x36410000
+#define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK	0xFFFFF000
+
+#define S5P6440_CPU_ID		0x56440000
+#define S5P6450_CPU_ID		0x36450000
+#define S5P64XX_CPU_MASK	0xFFFFF000
+
+#define S5PC100_CPU_ID		0x43100000
+#define S5PC100_CPU_MASK	0xFFFFF000
+
+#define S5PV210_CPU_ID		0x43110000
+#define S5PV210_CPU_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+    defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx()	is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx()	is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440()	is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450()	is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100()	is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210()	is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -55,6 +160,12 @@
 extern void s5p_init_io(struct map_desc *mach_desc,
 			int size, void __iomem *cpuid_addr);
 
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 extern void s3c24xx_init_clocks(int xtal);