diff --git a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
index 6ec7d68..05fe2b1 100644
--- a/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
+++ b/Documentation/networking/device_drivers/ethernet/pensando/ionic.rst
@@ -99,6 +99,12 @@
 the sysfs 'sriov_numvfs' value, if supported by your particular firmware
 configuration.
 
+XDP
+---
+
+Support for XDP includes the basics, plus Jumbo frames, Redirect and
+ndo_xmit.  There is no current support for zero-copy sockets or HW offload.
+
 Statistics
 ==========
 
@@ -138,6 +144,12 @@
      rx_csum_none: 0
      rx_csum_complete: 3
      rx_csum_error: 0
+     xdp_drop: 0
+     xdp_aborted: 0
+     xdp_pass: 0
+     xdp_tx: 0
+     xdp_redirect: 0
+     xdp_frames: 0
 
 Driver queue specific::
 
@@ -149,9 +161,12 @@
      tx_0_frags: 0
      tx_0_tso: 0
      tx_0_tso_bytes: 0
+     tx_0_hwstamp_valid: 0
+     tx_0_hwstamp_invalid: 0
      tx_0_csum_none: 3
      tx_0_csum: 0
      tx_0_vlan_inserted: 0
+     tx_0_xdp_frames: 0
      rx_0_pkts: 2
      rx_0_bytes: 120
      rx_0_dma_map_err: 0
@@ -159,8 +174,15 @@
      rx_0_csum_none: 0
      rx_0_csum_complete: 0
      rx_0_csum_error: 0
+     rx_0_hwstamp_valid: 0
+     rx_0_hwstamp_invalid: 0
      rx_0_dropped: 0
      rx_0_vlan_stripped: 0
+     rx_0_xdp_drop: 0
+     rx_0_xdp_aborted: 0
+     rx_0_xdp_pass: 0
+     rx_0_xdp_tx: 0
+     rx_0_xdp_redirect: 0
 
 Firmware port specific::
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 54775ea..24b4f59 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15164,7 +15164,6 @@
 NETFILTER
 M:	Pablo Neira Ayuso <pablo@netfilter.org>
 M:	Jozsef Kadlecsik <kadlec@netfilter.org>
-M:	Florian Westphal <fw@strlen.de>
 L:	netfilter-devel@vger.kernel.org
 L:	coreteam@netfilter.org
 S:	Maintained
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c
index f81b598..7b5028b 100644
--- a/drivers/net/can/kvaser_pciefd.c
+++ b/drivers/net/can/kvaser_pciefd.c
@@ -370,8 +370,8 @@
 
 static const struct kvaser_pciefd_irq_mask kvaser_pciefd_xilinx_irq_mask = {
 	.kcan_rx0 = BIT(4),
-	.kcan_tx = { BIT(16), BIT(17), BIT(18), BIT(19) },
-	.all = GENMASK(19, 16) | BIT(4),
+	.kcan_tx = { BIT(16), BIT(17), BIT(18), BIT(19), BIT(20), BIT(21), BIT(22), BIT(23) },
+	.all = GENMASK(23, 16) | BIT(4),
 };
 
 static const struct kvaser_pciefd_dev_ops kvaser_pciefd_altera_dev_ops = {
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6986f53..767f66c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -950,20 +950,56 @@
 	mutex_unlock(&priv->reg_mutex);
 }
 
+/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
+ * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
+ * must only be propagated to C-VLAN and MAC Bridge components. That means
+ * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
+ * these frames are supposed to be processed by the CPU (software). So we make
+ * the switch only forward them to the CPU port. And if received from a CPU
+ * port, forward to a single port. The software is responsible of making the
+ * switch conform to the latter by setting a single port as destination port on
+ * the special tag.
+ *
+ * This switch intellectual property cannot conform to this part of the standard
+ * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
+ * DAs, it also includes :22-FF which the scope of propagation is not supposed
+ * to be restricted for these MAC DAs.
+ */
 static void
 mt753x_trap_frames(struct mt7530_priv *priv)
 {
-	/* Trap BPDUs to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
+	/* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
+	 * VLAN-untagged.
+	 */
+	mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
+		   MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+		   MT753X_BPDU_PORT_FW_MASK,
+		   MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+		   MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
 		   MT753X_BPDU_CPU_ONLY);
 
-	/* Trap 802.1X PAE frames to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_PORT_FW_MASK,
-		   MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY));
+	/* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+	 * them VLAN-untagged.
+	 */
+	mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
+		   MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
+		   MT753X_R01_PORT_FW_MASK,
+		   MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+		   MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_BPDU_CPU_ONLY);
 
-	/* Trap LLDP frames with :0E MAC DA to the CPU port(s) */
-	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_PORT_FW_MASK,
-		   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY));
+	/* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+	 * them VLAN-untagged.
+	 */
+	mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
+		   MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
+		   MT753X_R03_PORT_FW_MASK,
+		   MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+		   MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+		   MT753X_BPDU_CPU_ONLY);
 }
 
 static void
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index a71166e..d17b318 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -65,14 +65,33 @@
 
 /* Registers for BPDU and PAE frame control*/
 #define MT753X_BPC			0x24
-#define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
+#define  MT753X_PAE_EG_TAG_MASK		GENMASK(24, 22)
+#define  MT753X_PAE_EG_TAG(x)		FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
 #define  MT753X_PAE_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_PAE_PORT_FW(x)		FIELD_PREP(MT753X_PAE_PORT_FW_MASK, x)
+#define  MT753X_BPDU_EG_TAG_MASK	GENMASK(8, 6)
+#define  MT753X_BPDU_EG_TAG(x)		FIELD_PREP(MT753X_BPDU_EG_TAG_MASK, x)
+#define  MT753X_BPDU_PORT_FW_MASK	GENMASK(2, 0)
+
+/* Register for :01 and :02 MAC DA frame control */
+#define MT753X_RGAC1			0x28
+#define  MT753X_R02_EG_TAG_MASK		GENMASK(24, 22)
+#define  MT753X_R02_EG_TAG(x)		FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+#define  MT753X_R02_PORT_FW_MASK	GENMASK(18, 16)
+#define  MT753X_R02_PORT_FW(x)		FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
+#define  MT753X_R01_EG_TAG_MASK		GENMASK(8, 6)
+#define  MT753X_R01_EG_TAG(x)		FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+#define  MT753X_R01_PORT_FW_MASK	GENMASK(2, 0)
 
 /* Register for :03 and :0E MAC DA frame control */
 #define MT753X_RGAC2			0x2c
+#define  MT753X_R0E_EG_TAG_MASK		GENMASK(24, 22)
+#define  MT753X_R0E_EG_TAG(x)		FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
 #define  MT753X_R0E_PORT_FW_MASK	GENMASK(18, 16)
 #define  MT753X_R0E_PORT_FW(x)		FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
+#define  MT753X_R03_EG_TAG_MASK		GENMASK(8, 6)
+#define  MT753X_R03_EG_TAG(x)		FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+#define  MT753X_R03_PORT_FW_MASK	GENMASK(2, 0)
 
 enum mt753x_bpdu_port_fw {
 	MT753X_BPDU_FOLLOW_MFC,
@@ -253,6 +272,7 @@
 enum mt7530_vlan_port_eg_tag {
 	MT7530_VLAN_EG_DISABLED = 0,
 	MT7530_VLAN_EG_CONSISTENT = 1,
+	MT7530_VLAN_EG_UNTAGGED = 4,
 };
 
 enum mt7530_vlan_port_attr {
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index fb3a9c9..aa40961 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -522,17 +522,18 @@
  *
  * (Bits 0, 1, 2, 3, 4, 5 are copied to the bits 0, 1, 4, 8, 9, 12)
  *
- * A more 'visual' description of the operation:
- * src:  0000000001011010
- *                 ||||||
- *          +------+|||||
- *          |  +----+||||
- *          |  |+----+|||
- *          |  ||   +-+||
- *          |  ||   |  ||
- * mask: ...v..vv...v..vv
- *       ...0..11...0..10
- * dst:  0000001100000010
+ * A more 'visual' description of the operation::
+ *
+ *	src:  0000000001011010
+ *	                ||||||
+ *	         +------+|||||
+ *	         |  +----+||||
+ *	         |  |+----+|||
+ *	         |  ||   +-+||
+ *	         |  ||   |  ||
+ *	mask: ...v..vv...v..vv
+ *	      ...0..11...0..10
+ *	dst:  0000001100000010
  *
  * A relationship exists between bitmap_scatter() and bitmap_gather().
  * bitmap_gather() can be seen as the 'reverse' bitmap_scatter() operation.
@@ -568,16 +569,17 @@
  *
  * (Bits 0, 1, 4, 8, 9, 12 are copied to the bits 0, 1, 2, 3, 4, 5)
  *
- * A more 'visual' description of the operation:
- * mask: ...v..vv...v..vv
- * src:  0000001100000010
- *          ^  ^^   ^   0
- *          |  ||   |  10
- *          |  ||   > 010
- *          |  |+--> 1010
- *          |  +--> 11010
- *          +----> 011010
- * dst:  0000000000011010
+ * A more 'visual' description of the operation::
+ *
+ *	mask: ...v..vv...v..vv
+ *	src:  0000001100000010
+ *	         ^  ^^   ^   0
+ *	         |  ||   |  10
+ *	         |  ||   > 010
+ *	         |  |+--> 1010
+ *	         |  +--> 11010
+ *	         +----> 011010
+ *	dst:  0000000000011010
  *
  * A relationship exists between bitmap_gather() and bitmap_scatter(). See
  * bitmap_scatter() for the bitmap scatter detailed operations.
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 16f5199..17d7ed5 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -247,6 +247,37 @@
 	cond_resched(); \
 } while (0)
 
+/**
+ * rcu_softirq_qs_periodic - Report RCU and RCU-Tasks quiescent states
+ * @old_ts: jiffies at start of processing.
+ *
+ * This helper is for long-running softirq handlers, such as NAPI threads in
+ * networking. The caller should initialize the variable passed in as @old_ts
+ * at the beginning of the softirq handler. When invoked frequently, this macro
+ * will invoke rcu_softirq_qs() every 100 milliseconds thereafter, which will
+ * provide both RCU and RCU-Tasks quiescent states. Note that this macro
+ * modifies its old_ts argument.
+ *
+ * Because regions of code that have disabled softirq act as RCU read-side
+ * critical sections, this macro should be invoked with softirq (and
+ * preemption) enabled.
+ *
+ * The macro is not needed when CONFIG_PREEMPT_RT is defined. RT kernels would
+ * have more chance to invoke schedule() calls and provide necessary quiescent
+ * states. As a contrast, calling cond_resched() only won't achieve the same
+ * effect because cond_resched() does not provide RCU-Tasks quiescent states.
+ */
+#define rcu_softirq_qs_periodic(old_ts) \
+do { \
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT) && \
+	    time_after(jiffies, (old_ts) + HZ / 10)) { \
+		preempt_disable(); \
+		rcu_softirq_qs(); \
+		preempt_enable(); \
+		(old_ts) = jiffies; \
+	} \
+} while (0)
+
 /*
  * Infrastructure to implement the synchronize_() primitives in
  * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c
index 9ee8da4..a8e3441 100644
--- a/kernel/bpf/cpumap.c
+++ b/kernel/bpf/cpumap.c
@@ -263,6 +263,7 @@
 static int cpu_map_kthread_run(void *data)
 {
 	struct bpf_cpu_map_entry *rcpu = data;
+	unsigned long last_qs = jiffies;
 
 	complete(&rcpu->kthread_running);
 	set_current_state(TASK_INTERRUPTIBLE);
@@ -288,10 +289,12 @@
 			if (__ptr_ring_empty(rcpu->queue)) {
 				schedule();
 				sched = 1;
+				last_qs = jiffies;
 			} else {
 				__set_current_state(TASK_RUNNING);
 			}
 		} else {
+			rcu_softirq_qs_periodic(last_qs);
 			sched = cond_resched();
 		}
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 303a6ff..9a67003 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -6743,6 +6743,8 @@
 	void *have;
 
 	while (!napi_thread_wait(napi)) {
+		unsigned long last_qs = jiffies;
+
 		for (;;) {
 			bool repoll = false;
 
@@ -6767,6 +6769,7 @@
 			if (!repoll)
 				break;
 
+			rcu_softirq_qs_periodic(last_qs);
 			cond_resched();
 		}
 	}
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
index a0bb452..a603f7b 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
@@ -354,7 +354,7 @@
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome ARP noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 10 100
@@ -410,7 +410,7 @@
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome neighbor discovery noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping6_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping6_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 100
diff --git a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
index d880df8..e83fde7 100755
--- a/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
+++ b/tools/testing/selftests/net/forwarding/vxlan_bridge_1q_ipv6.sh
@@ -457,7 +457,7 @@
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome ARP noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 10 100
@@ -522,7 +522,7 @@
 
 	# Send 100 packets and verify that at least 100 packets hit the rule,
 	# to overcome neighbor discovery noise.
-	PING_COUNT=100 PING_TIMEOUT=11 ping6_do $dev $dst_ip
+	PING_COUNT=100 PING_TIMEOUT=20 ping6_do $dev $dst_ip
 	check_err $? "Ping failed"
 
 	tc_check_at_least_x_packets "dev $rp1 egress" 101 100