# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/arm/arm,coresight-static-replicator.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Arm CoreSight Static Trace Bus Replicator

maintainers:
  - Mathieu Poirier <mathieu.poirier@linaro.org>
  - Mike Leach <mike.leach@linaro.org>
  - Leo Yan <leo.yan@linaro.org>
  - Suzuki K Poulose <suzuki.poulose@arm.com>

description: |
  CoreSight components are compliant with the ARM CoreSight architecture
  specification and can be connected in various topologies to suit a particular
  SoCs tracing needs. These trace components can generally be classified as
  sinks, links and sources. Trace data produced by one or more sources flows
  through the intermediate links connecting the source to the currently selected
  sink.

  The Coresight replicator splits a single trace stream into two trace streams
  for systems that have more than one trace sink component.

properties:
  compatible:
    const: arm,coresight-static-replicator

  power-domains:
    maxItems: 1

  in-ports:
    $ref: /schemas/graph.yaml#/properties/ports
    additionalProperties: false

    properties:
      port:
        description: Input connection from CoreSight Trace bus
        $ref: /schemas/graph.yaml#/properties/port

  out-ports:
    $ref: /schemas/graph.yaml#/properties/ports

    patternProperties:
      '^port@[01]$':
        description: Output connections to CoreSight Trace bus
        $ref: /schemas/graph.yaml#/properties/port

required:
  - compatible
  - in-ports
  - out-ports

additionalProperties: false

examples:
  - |
    replicator {
        /*
         * non-configurable replicators don't show up on the
         * AMBA bus.  As such no need to add "arm,primecell".
         */
        compatible = "arm,coresight-static-replicator";

        out-ports {
            #address-cells = <1>;
            #size-cells = <0>;

            /* replicator output ports */
            port@0 {
                reg = <0>;
                replicator_out_port0: endpoint {
                    remote-endpoint = <&etb_in_port>;
                };
            };

            port@1 {
                reg = <1>;
                replicator_out_port1: endpoint {
                    remote-endpoint = <&tpiu_in_port>;
                };
            };
        };

        in-ports {
            port {
                replicator_in_port0: endpoint {
                    remote-endpoint = <&funnel_out_port0>;
                };
            };
        };
    };
...