# SPDX-License-Identifier: GPL-2.0-or-later
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2500-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: ASPEED AST2500 Pin Controller

maintainers:
  - Andrew Jeffery <andrew@aj.id.au>

description: |+
  The pin controller node should be the child of a syscon node with the
  required property:

  - compatible: 	Should be one of the following:
  			"aspeed,ast2500-scu", "syscon", "simple-mfd"
  			"aspeed,g5-scu", "syscon", "simple-mfd"

  Refer to the bindings described in
  Documentation/devicetree/bindings/mfd/syscon.yaml

properties:
  compatible:
    const: aspeed,ast2500-pinctrl
  reg:
    maxItems: 2

  aspeed,external-nodes:
    minItems: 2
    maxItems: 2
    items:
      maxItems: 1
    $ref: /schemas/types.yaml#/definitions/phandle-array
    description: |
      A cell of phandles to external controller nodes:
      0: compatible with "aspeed,ast2500-gfx", "syscon"
      1: compatible with "aspeed,ast2500-lhc", "syscon"

additionalProperties:
  $ref: pinmux-node.yaml#
  additionalProperties: false

  properties:
    pins: true
    bias-disable: true

  patternProperties:
    "^function|groups$":
      enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
              ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
              ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
              GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
              I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
              LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
              MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
              NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
              NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
              PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
              RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
              SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
              SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
              SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
              SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
              TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
              USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
              VGAVS, VPI24, VPO, WDTRST1, WDTRST2]

allOf:
  - $ref: pinctrl.yaml#

required:
  - compatible
  - aspeed,external-nodes

examples:
  - |
    #include <dt-bindings/clock/aspeed-clock.h>
    scu@1e6e2000 {
        compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
        reg = <0x1e6e2000 0x1a8>;
        #clock-cells = <1>;
        #reset-cells = <1>;

        #address-cells = <1>;
        #size-cells = <1>;
        ranges = <0x0 0x1e6e2000 0x1000>;

        pinctrl: pinctrl {
            compatible = "aspeed,ast2500-pinctrl";
            aspeed,external-nodes = <&gfx>, <&lhc>;

            pinctrl_i2c3_default: i2c3_default {
                function = "I2C3";
                groups = "I2C3";
            };

            pinctrl_gpioh0_unbiased_default: gpioh0 {
                pins = "A18";
                bias-disable;
            };
        };
    };