/*
 * Device Tree Source for PIKA Warp
 *
 * Copyright (c) 2008-2009 PIKA Technologies
 *   Sean MacLennan <smaclennan@pikatech.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without
 * any warranty of any kind, whether express or implied.
 */

/dts-v1/;

/ {
	#address-cells = <2>;
	#size-cells = <1>;
	model = "pika,warp";
	compatible = "pika,warp";
	dcr-parent = <&{/cpus/cpu@0}>;

	aliases {
		ethernet0 = &EMAC0;
		serial0 = &UART0;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			model = "PowerPC,440EP";
			reg = <0x00000000>;
			clock-frequency = <0>; /* Filled in by zImage */
			timebase-frequency = <0>; /* Filled in by zImage */
			i-cache-line-size = <32>;
			d-cache-line-size = <32>;
			i-cache-size = <32768>;
			d-cache-size = <32768>;
			dcr-controller;
			dcr-access-method = "native";
		};
	};

	memory {
		device_type = "memory";
		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
	};

	UIC0: interrupt-controller0 {
		compatible = "ibm,uic-440ep","ibm,uic";
		interrupt-controller;
		cell-index = <0>;
		dcr-reg = <0x0c0 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
	};

	UIC1: interrupt-controller1 {
		compatible = "ibm,uic-440ep","ibm,uic";
		interrupt-controller;
		cell-index = <1>;
		dcr-reg = <0x0d0 0x009>;
		#address-cells = <0>;
		#size-cells = <0>;
		#interrupt-cells = <2>;
		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
		interrupt-parent = <&UIC0>;
	};

	SDR0: sdr {
		compatible = "ibm,sdr-440ep";
		dcr-reg = <0x00e 0x002>;
	};

	CPR0: cpr {
		compatible = "ibm,cpr-440ep";
		dcr-reg = <0x00c 0x002>;
	};

	plb {
		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
		#address-cells = <2>;
		#size-cells = <1>;
		ranges;
		clock-frequency = <0>; /* Filled in by zImage */

		SDRAM0: sdram {
			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
			dcr-reg = <0x010 0x002>;
		};

		DMA0: dma {
			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
			dcr-reg = <0x100 0x027>;
		};

		MAL0: mcmal {
			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
			dcr-reg = <0x180 0x062>;
			num-tx-chans = <4>;
			num-rx-chans = <2>;
			interrupt-parent = <&MAL0>;
			interrupts = <0x0 0x1 0x2 0x3 0x4>;
			#interrupt-cells = <1>;
			#address-cells = <0>;
			#size-cells = <0>;
			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
					/*SERR*/  0x2 &UIC1 0x0 0x4
					/*TXDE*/  0x3 &UIC1 0x1 0x4
					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
		};

		POB0: opb {
		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
			#address-cells = <1>;
			#size-cells = <1>;
		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
			          0x80000000 0x00000000 0x80000000 0x80000000>;
		  	interrupt-parent = <&UIC1>;
		  	interrupts = <0x7 0x4>;
		  	clock-frequency = <0>; /* Filled in by zImage */

			EBC0: ebc {
				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
				dcr-reg = <0x012 0x002>;
				#address-cells = <2>;
				#size-cells = <1>;
				clock-frequency = <0>; /* Filled in by zImage */
				interrupts = <0x5 0x1>;
				interrupt-parent = <&UIC1>;

				fpga@2,0 {
					compatible = "pika,fpga";
			   		reg = <0x00000002 0x00000000 0x00001000>;
					interrupts = <0x18 0x8>;
					interrupt-parent = <&UIC0>;
				};

				fpga@2,2000 {
					compatible = "pika,fpga-sgl";
			   		reg = <0x00000002 0x00002000 0x00000200>;
				};

				fpga@2,4000 {
					compatible = "pika,fpga-sd";
					reg = <0x00000002 0x00004000 0x00004000>;
				};

				nor@0,0 {
					compatible = "amd,s29gl032a", "cfi-flash";
					bank-width = <2>;
					reg = <0x00000000 0x00000000 0x00400000>;
					#address-cells = <1>;
					#size-cells = <1>;

					partition@0 {
						label = "splash";
						reg = <0x00000000 0x00010000>;
					};
					partition@300000 {
						label = "fpga";
						reg = <0x0300000 0x00040000>;
					};
					partition@340000 {
						label = "env";
						reg = <0x0340000 0x00040000>;
					};
					partition@380000 {
						label = "u-boot";
						reg = <0x0380000 0x00080000>;
					};
				};

				ndfc@1,0 {
					compatible = "ibm,ndfc";
					reg = <0x00000001 0x00000000 0x00002000>;
					ccr = <0x00001000>;
					bank-settings = <0x80002222>;
					#address-cells = <1>;
					#size-cells = <1>;

					nand {
						#address-cells = <1>;
						#size-cells = <1>;

						partition@0 {
							label = "kernel";
							reg = <0x00000000 0x00200000>;
						};
						partition@200000 {
							label = "root";
							reg = <0x00200000 0x03E00000>;
						};
						partition@40000000 {
							label = "persistent";
							reg = <0x04000000 0x04000000>;
						};
						partition@80000000 {
							label = "persistent1";
							reg = <0x08000000 0x04000000>;
						};
						partition@C0000000 {
							label = "persistent2";
							reg = <0x0C000000 0x04000000>;
						};
					};
				};
			};

			UART0: serial@ef600300 {
		   		device_type = "serial";
		   		compatible = "ns16550";
		   		reg = <0xef600300 0x00000008>;
		   		virtual-reg = <0xef600300>;
		   		clock-frequency = <0>; /* Filled in by zImage */
		   		current-speed = <115200>;
		   		interrupt-parent = <&UIC0>;
		   		interrupts = <0x0 0x4>;
	   		};

			IIC0: i2c@ef600700 {
				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
				reg = <0xef600700 0x00000014>;
				interrupt-parent = <&UIC0>;
				interrupts = <0x2 0x4>;
				#address-cells = <1>;
				#size-cells = <0>;

				ad7414@4a {
					compatible = "adi,ad7414";
					reg = <0x4a>;
					interrupts = <0x19 0x8>;
					interrupt-parent = <&UIC0>;
				};

				/* This will create 52 and 53 */
				at24@52 {
					compatible = "atmel,24c04";
					reg = <0x52>;
				};
			};

			GPIO0: gpio@ef600b00 {
				compatible = "ibm,ppc4xx-gpio";
				reg = <0xef600b00 0x00000048>;
				#gpio-cells = <2>;
				gpio-controller;
			};

			GPIO1: gpio@ef600c00 {
				compatible = "ibm,ppc4xx-gpio";
				reg = <0xef600c00 0x00000048>;
				#gpio-cells = <2>;
				gpio-controller;
			};

			power-leds {
				compatible = "warp-power-leds";
				green {
					gpios = <&GPIO1 0 0>;
				};
				red {
					gpios = <&GPIO1 1 0>;
				};
			};

			ZMII0: emac-zmii@ef600d00 {
				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
				reg = <0xef600d00 0x0000000c>;
			};

			EMAC0: ethernet@ef600e00 {
				device_type = "network";
				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
				interrupt-parent = <&UIC1>;
				interrupts = <0x1c 0x4 0x1d 0x4>;
				reg = <0xef600e00 0x00000070>;
				local-mac-address = [000000000000];
				mal-device = <&MAL0>;
				mal-tx-channel = <0 1>;
				mal-rx-channel = <0>;
				cell-index = <0>;
				max-frame-size = <1500>;
				rx-fifo-size = <4096>;
				tx-fifo-size = <2048>;
				phy-mode = "rmii";
				phy-map = <0x00000000>;
				zmii-device = <&ZMII0>;
				zmii-channel = <0>;
			};

			usb@ef601000 {
				compatible = "ohci-be";
				reg = <0xef601000 0x00000080>;
				interrupts = <0x8 0x1 0x9 0x1>;
				interrupt-parent = < &UIC1 >;
			};
		};
	};

	chosen {
		stdout-path = "/plb/opb/serial@ef600300";
	};
};