diff --git a/Documentation/fb/gxfb.txt b/Documentation/fb/gxfb.txt
new file mode 100644
index 0000000..b560961
--- /dev/null
+++ b/Documentation/fb/gxfb.txt
@@ -0,0 +1,51 @@
+[This file is cloned from VesaFB/aty128fb]
+
+What is gxfb?
+=================
+
+This is a graphics framebuffer driver for AMD Geode GX2 based processors.
+
+Advantages:
+
+ * No need to use AMD's VSA code (or other VESA emulation layer) in the
+   BIOS.
+ * It provides a nice large console (128 cols + 48 lines with 1024x768)
+   without using tiny, unreadable fonts.
+ * You can run XF68_FBDev on top of /dev/fb0
+ * Most important: boot logo :-)
+
+Disadvantages:
+
+ * graphic mode is slower than text mode...
+
+
+How to use it?
+==============
+
+Switching modes is done using  gxfb.mode_option=<resolution>... boot
+parameter or using `fbset' program.
+
+See Documentation/fb/modedb.txt for more information on modedb
+resolutions.
+
+
+X11
+===
+
+XF68_FBDev should generally work fine, but it is non-accelerated.
+
+
+Configuration
+=============
+
+You can pass kernel command line options to gxfb with gxfb.<option>.
+For example, gxfb.mode_option=800x600@75.
+Accepted options:
+
+mode_option	- specify the video mode.  Of the form
+		  <x>x<y>[-<bpp>][@<refresh>]
+vram		- size of video ram (normally auto-detected)
+
+
+--
+Andres Salomon <dilinger@debian.org>
diff --git a/drivers/video/geode/Kconfig b/drivers/video/geode/Kconfig
index 7608429..c5d8ba4 100644
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/geode/Kconfig
@@ -38,26 +38,6 @@
 
 	  If unsure, say N.
 
-config FB_GEODE_GX_SET_FBSIZE
-	bool "Manually specify the Geode GX framebuffer size"
-	depends on FB_GEODE_GX
-	default n
-	---help---
-	  If you want to manually specify the size of your GX framebuffer,
-	  say Y here, otherwise say N to dynamically probe it.
-
-	  Say N unless you know what you are doing.
-
-config FB_GEODE_GX_FBSIZE
-	hex "Size of the GX framebuffer, in bytes"
-	depends on FB_GEODE_GX_SET_FBSIZE
-	default "0x1600000"
-	---help---
-	  Specify the size of the GX framebuffer.  Normally, you will
-	  want this to be MB aligned.  Common values are 0x80000 (8MB)
-	  and 0x1600000 (16MB).  Don't change this unless you know what
-	  you are doing
-
 config FB_GEODE_GX1
 	tristate "AMD Geode GX1 framebuffer support (EXPERIMENTAL)"
 	depends on FB && FB_GEODE && EXPERIMENTAL
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/geode/display_gx.c
index 0f16e4b..8cd7572 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/geode/display_gx.c
@@ -21,12 +21,6 @@
 #include "geodefb.h"
 #include "display_gx.h"
 
-#ifdef CONFIG_FB_GEODE_GX_SET_FBSIZE
-unsigned int gx_frame_buffer_size(void)
-{
-	return CONFIG_FB_GEODE_GX_FBSIZE;
-}
-#else
 unsigned int gx_frame_buffer_size(void)
 {
 	unsigned int val;
@@ -41,7 +35,6 @@
 	val = (unsigned int)(inw(0xAC1E)) & 0xFFl;
 	return (val << 19);
 }
-#endif
 
 int gx_line_delta(int xres, int bpp)
 {
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/geode/gxfb_core.c
index 546e530..8021bcb 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/geode/gxfb_core.c
@@ -37,6 +37,7 @@
 #include "video_gx.h"
 
 static char *mode_option;
+static int vram;
 
 /* Modes relevant to the GX (taken from modedb.c) */
 static const struct fb_videomode gx_modedb[] __initdata = {
@@ -208,7 +209,6 @@
 static int __init gxfb_map_video_memory(struct fb_info *info, struct pci_dev *dev)
 {
 	struct geodefb_par *par = info->par;
-	int fb_len;
 	int ret;
 
 	ret = pci_enable_device(dev);
@@ -233,21 +233,20 @@
 	ret = pci_request_region(dev, 0, "gxfb (framebuffer)");
 	if (ret < 0)
 		return ret;
-	if ((fb_len = gx_frame_buffer_size()) < 0)
-		return -ENOMEM;
+
 	info->fix.smem_start = pci_resource_start(dev, 0);
-	info->fix.smem_len = fb_len;
+	info->fix.smem_len = vram ? vram : gx_frame_buffer_size();
 	info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
 	if (!info->screen_base)
 		return -ENOMEM;
 
-	/* Set the 16MB aligned base address of the graphics memory region
+	/* Set the 16MiB aligned base address of the graphics memory region
 	 * in the display controller */
 
 	writel(info->fix.smem_start & 0xFF000000,
 			par->dc_regs + DC_GLIU0_MEM_OFFSET);
 
-	dev_info(&dev->dev, "%d Kibyte of video memory at 0x%lx\n",
+	dev_info(&dev->dev, "%d KiB of video memory at 0x%lx\n",
 		 info->fix.smem_len / 1024, info->fix.smem_start);
 
 	return 0;
@@ -455,5 +454,8 @@
 module_param(mode_option, charp, 0);
 MODULE_PARM_DESC(mode_option, "video mode (<x>x<y>[-<bpp>][@<refr>])");
 
+module_param(vram, int, 0);
+MODULE_PARM_DESC(vram, "video memory size");
+
 MODULE_DESCRIPTION("Framebuffer driver for the AMD Geode GX");
 MODULE_LICENSE("GPL");