#
# m68k/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies.
#
# This file is subject to the terms and conditions of the GNU General Public
# License.  See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Hamish Macdonald
# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
#

KBUILD_DEFCONFIG := multi_defconfig

ifdef cross_compiling
        ifeq ($(CROSS_COMPILE),)
		CROSS_COMPILE := $(call cc-cross-prefix, \
			m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
        endif
endif

#
#	Enable processor type. Ordering of these is important - we want to
#	use the minimum processor type of the range we support. The logic
#	for 680x0 will only allow use of the -m68060 or -m68040 if no other
#	680x0 type is specified - and no option is specified for 68030 or
#	68020. The other m68k/ColdFire types always specify some type of
#	compiler cpu type flag.
#
ifndef CONFIG_M68040
cpuflags-$(CONFIG_M68060)	= -m68060
endif
ifndef CONFIG_M68060
cpuflags-$(CONFIG_M68040)	= -m68040
endif
cpuflags-$(CONFIG_M68030)	=
cpuflags-$(CONFIG_M68020)	=
cpuflags-$(CONFIG_M68000)	= -m68000
cpuflags-$(CONFIG_M5441x)	= $(call cc-option,-mcpu=54455,-mcfv4e)
cpuflags-$(CONFIG_M54xx)	= $(call cc-option,-mcpu=5475,-m5200)
cpuflags-$(CONFIG_M5407)	= $(call cc-option,-mcpu=5407,-m5200)
cpuflags-$(CONFIG_M532x)	= $(call cc-option,-mcpu=532x,-m5307)
cpuflags-$(CONFIG_M537x)	= $(call cc-option,-mcpu=537x,-m5307)
cpuflags-$(CONFIG_M5307)	= $(call cc-option,-mcpu=5307,-m5200)
cpuflags-$(CONFIG_M528x)	= $(call cc-option,-mcpu=528x,-m5307)
cpuflags-$(CONFIG_M5275)	= $(call cc-option,-mcpu=5275,-m5307)
cpuflags-$(CONFIG_M5272)	= $(call cc-option,-mcpu=5272,-m5307)
cpuflags-$(CONFIG_M5271)	= $(call cc-option,-mcpu=5271,-m5307)
cpuflags-$(CONFIG_M523x)	= $(call cc-option,-mcpu=523x,-m5307)
cpuflags-$(CONFIG_M525x)	= $(call cc-option,-mcpu=5253,-m5200)
cpuflags-$(CONFIG_M5249)	= $(call cc-option,-mcpu=5249,-m5200)
cpuflags-$(CONFIG_M520x)	= $(call cc-option,-mcpu=5208,-m5200)
cpuflags-$(CONFIG_M5206e)	= $(call cc-option,-mcpu=5206e,-m5200)
cpuflags-$(CONFIG_M5206)	= $(call cc-option,-mcpu=5206,-m5200)

# Evaluate tune cc-option calls now
cpuflags-y := $(cpuflags-y)

KBUILD_AFLAGS += $(cpuflags-y)
KBUILD_CFLAGS += $(cpuflags-y)

KBUILD_CFLAGS += -pipe -ffreestanding

ifdef CONFIG_MMU
KBUILD_CFLAGS += -ffixed-a2
else
# we can use a m68k-linux-gcc toolchain with these in place
KBUILD_CPPFLAGS += -DUTS_SYSNAME=\"uClinux\"
KBUILD_CPPFLAGS += -D__uClinux__
endif

KBUILD_LDFLAGS := -m m68kelf

ifdef CONFIG_SUN3
LDFLAGS_vmlinux = -N
endif

CHECKFLAGS += -D__mc68000__


ifdef CONFIG_KGDB
# If configured for kgdb support, include debugging infos and keep the
# frame pointer
KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
endif

libs-y				+= arch/m68k/lib/


all:	zImage

lilo:	vmlinux
	if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
	if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
	cat vmlinux > $(INSTALL_PATH)/vmlinux
	cp System.map $(INSTALL_PATH)/System.map
	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi

zImage compressed: vmlinux.gz

vmlinux.gz: vmlinux

ifndef CONFIG_KGDB
	cp vmlinux vmlinux.tmp
	$(STRIP) vmlinux.tmp
	$(KGZIP) -9c vmlinux.tmp >vmlinux.gz
	rm vmlinux.tmp
else
	$(KGZIP) -9c vmlinux >vmlinux.gz
endif

bzImage: vmlinux.bz2

vmlinux.bz2: vmlinux

ifndef CONFIG_KGDB
	cp vmlinux vmlinux.tmp
	$(STRIP) vmlinux.tmp
	$(KBZIP2) -1c vmlinux.tmp >vmlinux.bz2
	rm vmlinux.tmp
else
	$(KBZIP2) -1c vmlinux >vmlinux.bz2
endif

CLEAN_FILES += vmlinux.gz vmlinux.bz2

archheaders:
	$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all

install: KBUILD_IMAGE := vmlinux.gz
install:
	$(call cmd,install)