mfd: AB3100 register access change to abx500 API
The interface for the AB3100 is changed to make way for the
ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson
Analog Baseband chips. The register access functions are moved
out to a separate struct abx500_ops. In this way the interface
is moved from the implementation and the sub functionality drivers
can keep their interface intact when chip infrastructure and
communication mechanisms changes. We also define the AB3550
device IDs and the AB3550 platform data struct and convert
the catenated 32bit event to an array of 3 x 8bits.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c
index b46b85d..d26780e 100644
--- a/drivers/rtc/rtc-ab3100.c
+++ b/drivers/rtc/rtc-ab3100.c
@@ -45,7 +45,6 @@
*/
static int ab3100_rtc_set_mmss(struct device *dev, unsigned long secs)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
u8 regs[] = {AB3100_TI0, AB3100_TI1, AB3100_TI2,
AB3100_TI3, AB3100_TI4, AB3100_TI5};
unsigned char buf[6];
@@ -61,27 +60,26 @@
buf[5] = (fat_time >> 40) & 0xFF;
for (i = 0; i < 6; i++) {
- err = ab3100_set_register_interruptible(ab3100_data,
+ err = abx500_set_register_interruptible(dev, 0,
regs[i], buf[i]);
if (err)
return err;
}
/* Set the flag to mark that the clock is now set */
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
+ return abx500_mask_and_set_register_interruptible(dev, 0,
AB3100_RTC,
- 0xFE, 0x01);
+ 0x01, 0x01);
}
static int ab3100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
unsigned long time;
u8 rtcval;
int err;
- err = ab3100_get_register_interruptible(ab3100_data,
+ err = abx500_get_register_interruptible(dev, 0,
AB3100_RTC, &rtcval);
if (err)
return err;
@@ -94,7 +92,7 @@
u8 buf[6];
/* Read out time registers */
- err = ab3100_get_register_page_interruptible(ab3100_data,
+ err = abx500_get_register_page_interruptible(dev, 0,
AB3100_TI0,
buf, 6);
if (err != 0)
@@ -114,7 +112,6 @@
static int ab3100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
unsigned long time;
u64 fat_time;
u8 buf[6];
@@ -122,7 +119,7 @@
int err;
/* Figure out if alarm is enabled or not */
- err = ab3100_get_register_interruptible(ab3100_data,
+ err = abx500_get_register_interruptible(dev, 0,
AB3100_RTC, &rtcval);
if (err)
return err;
@@ -133,7 +130,7 @@
/* No idea how this could be represented */
alarm->pending = 0;
/* Read out alarm registers, only 4 bytes */
- err = ab3100_get_register_page_interruptible(ab3100_data,
+ err = abx500_get_register_page_interruptible(dev, 0,
AB3100_AL0, buf, 4);
if (err)
return err;
@@ -148,7 +145,6 @@
static int ab3100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
u8 regs[] = {AB3100_AL0, AB3100_AL1, AB3100_AL2, AB3100_AL3};
unsigned char buf[4];
unsigned long secs;
@@ -165,21 +161,19 @@
/* Set the alarm */
for (i = 0; i < 4; i++) {
- err = ab3100_set_register_interruptible(ab3100_data,
+ err = abx500_set_register_interruptible(dev, 0,
regs[i], buf[i]);
if (err)
return err;
}
/* Then enable the alarm */
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
- AB3100_RTC, ~(1 << 2),
+ return abx500_mask_and_set_register_interruptible(dev, 0,
+ AB3100_RTC, (1 << 2),
alarm->enabled << 2);
}
static int ab3100_rtc_irq_enable(struct device *dev, unsigned int enabled)
{
- struct ab3100 *ab3100_data = dev_get_drvdata(dev);
-
/*
* It's not possible to enable/disable the alarm IRQ for this RTC.
* It does not actually trigger any IRQ: instead its only function is
@@ -188,12 +182,12 @@
* and need to be handled there instead.
*/
if (enabled)
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
- AB3100_RTC, ~(1 << 2),
+ return abx500_mask_and_set_register_interruptible(dev, 0,
+ AB3100_RTC, (1 << 2),
1 << 2);
else
- return ab3100_mask_and_set_register_interruptible(ab3100_data,
- AB3100_RTC, ~(1 << 2),
+ return abx500_mask_and_set_register_interruptible(dev, 0,
+ AB3100_RTC, (1 << 2),
0);
}
@@ -210,10 +204,9 @@
int err;
u8 regval;
struct rtc_device *rtc;
- struct ab3100 *ab3100_data = platform_get_drvdata(pdev);
/* The first RTC register needs special treatment */
- err = ab3100_get_register_interruptible(ab3100_data,
+ err = abx500_get_register_interruptible(&pdev->dev, 0,
AB3100_RTC, ®val);
if (err) {
dev_err(&pdev->dev, "unable to read RTC register\n");
@@ -231,7 +224,7 @@
* This bit remains until RTC power is lost.
*/
regval = 1 | RTC_SETTING;
- err = ab3100_set_register_interruptible(ab3100_data,
+ err = abx500_set_register_interruptible(&pdev->dev, 0,
AB3100_RTC, regval);
/* Ignore any error on this write */
}
