// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * processor_perflib.c - ACPI Processor P-States Library ($Revision: 71 $)
 *
 *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
 *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
 *  Copyright (C) 2004       Dominik Brodowski <linux@brodo.de>
 *  Copyright (C) 2004  Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 *  			- Added processor hotplug support
 */

#define pr_fmt(fmt) "ACPI: " fmt

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <acpi/processor.h>
#ifdef CONFIG_X86
#include <asm/cpufeature.h>
#include <asm/msr.h>
#endif

#define ACPI_PROCESSOR_FILE_PERFORMANCE	"performance"

/*
 * _PPC support is implemented as a CPUfreq policy notifier:
 * This means each time a CPUfreq driver registered also with
 * the ACPI core is asked to change the speed policy, the maximum
 * value is adjusted so that it is within the platform limit.
 *
 * Also, when a new platform limit value is detected, the CPUfreq
 * policy is adjusted accordingly.
 */

/* ignore_ppc:
 * -1 -> cpufreq low level drivers not initialized -> _PSS, etc. not called yet
 *       ignore _PPC
 *  0 -> cpufreq low level drivers initialized -> consider _PPC values
 *  1 -> ignore _PPC totally -> forced by user through boot param
 */
static int ignore_ppc = -1;
module_param(ignore_ppc, int, 0644);
MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
		 "limited by BIOS, this should help");

static bool acpi_processor_ppc_in_use;

static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
{
	acpi_status status = 0;
	unsigned long long ppc = 0;
	s32 qos_value;
	int index;
	int ret;

	if (!pr)
		return -EINVAL;

	/*
	 * _PPC indicates the maximum state currently supported by the platform
	 * (e.g. 0 = states 0..n; 1 = states 1..n; etc.
	 */
	status = acpi_evaluate_integer(pr->handle, "_PPC", NULL, &ppc);
	if (status != AE_NOT_FOUND) {
		acpi_processor_ppc_in_use = true;

		if (ACPI_FAILURE(status)) {
			acpi_evaluation_failure_warn(pr->handle, "_PPC", status);
			return -ENODEV;
		}
	}

	index = ppc;

	if (pr->performance_platform_limit == index ||
	    ppc >= pr->performance->state_count)
		return 0;

	pr_debug("CPU %d: _PPC is %d - frequency %s limited\n", pr->id,
		 index, index ? "is" : "is not");

	pr->performance_platform_limit = index;

	if (unlikely(!freq_qos_request_active(&pr->perflib_req)))
		return 0;

	/*
	 * If _PPC returns 0, it means that all of the available states can be
	 * used ("no limit").
	 */
	if (index == 0)
		qos_value = FREQ_QOS_MAX_DEFAULT_VALUE;
	else
		qos_value = pr->performance->states[index].core_frequency * 1000;

	ret = freq_qos_update_request(&pr->perflib_req, qos_value);
	if (ret < 0) {
		pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n",
			pr->id, ret);
	}

	return 0;
}

#define ACPI_PROCESSOR_NOTIFY_PERFORMANCE	0x80
/*
 * acpi_processor_ppc_ost: Notify firmware the _PPC evaluation status
 * @handle: ACPI processor handle
 * @status: the status code of _PPC evaluation
 *	0: success. OSPM is now using the performance state specified.
 *	1: failure. OSPM has not changed the number of P-states in use
 */
static void acpi_processor_ppc_ost(acpi_handle handle, int status)
{
	if (acpi_has_method(handle, "_OST"))
		acpi_evaluate_ost(handle, ACPI_PROCESSOR_NOTIFY_PERFORMANCE,
				  status, NULL);
}

void acpi_processor_ppc_has_changed(struct acpi_processor *pr, int event_flag)
{
	int ret;

	if (ignore_ppc || !pr->performance) {
		/*
		 * Only when it is notification event, the _OST object
		 * will be evaluated. Otherwise it is skipped.
		 */
		if (event_flag)
			acpi_processor_ppc_ost(pr->handle, 1);
		return;
	}

	ret = acpi_processor_get_platform_limit(pr);
	/*
	 * Only when it is notification event, the _OST object
	 * will be evaluated. Otherwise it is skipped.
	 */
	if (event_flag) {
		if (ret < 0)
			acpi_processor_ppc_ost(pr->handle, 1);
		else
			acpi_processor_ppc_ost(pr->handle, 0);
	}
	if (ret >= 0)
		cpufreq_update_limits(pr->id);
}

int acpi_processor_get_bios_limit(int cpu, unsigned int *limit)
{
	struct acpi_processor *pr;

	pr = per_cpu(processors, cpu);
	if (!pr || !pr->performance || !pr->performance->state_count)
		return -ENODEV;

	*limit = pr->performance->states[pr->performance_platform_limit].
		core_frequency * 1000;
	return 0;
}
EXPORT_SYMBOL(acpi_processor_get_bios_limit);

void acpi_processor_ignore_ppc_init(void)
{
	if (ignore_ppc < 0)
		ignore_ppc = 0;
}

void acpi_processor_ppc_init(struct cpufreq_policy *policy)
{
	unsigned int cpu;

	if (ignore_ppc == 1)
		return;

	for_each_cpu(cpu, policy->related_cpus) {
		struct acpi_processor *pr = per_cpu(processors, cpu);
		int ret;

		if (!pr)
			continue;

		/*
		 * Reset performance_platform_limit in case there is a stale
		 * value in it, so as to make it match the "no limit" QoS value
		 * below.
		 */
		pr->performance_platform_limit = 0;

		ret = freq_qos_add_request(&policy->constraints,
					   &pr->perflib_req, FREQ_QOS_MAX,
					   FREQ_QOS_MAX_DEFAULT_VALUE);
		if (ret < 0)
			pr_err("Failed to add freq constraint for CPU%d (%d)\n",
			       cpu, ret);

		if (!pr->performance)
			continue;

		ret = acpi_processor_get_platform_limit(pr);
		if (ret)
			pr_err("Failed to update freq constraint for CPU%d (%d)\n",
			       cpu, ret);
	}
}

void acpi_processor_ppc_exit(struct cpufreq_policy *policy)
{
	unsigned int cpu;

	for_each_cpu(cpu, policy->related_cpus) {
		struct acpi_processor *pr = per_cpu(processors, cpu);

		if (pr)
			freq_qos_remove_request(&pr->perflib_req);
	}
}

#ifdef CONFIG_X86

static DEFINE_MUTEX(performance_mutex);

static int acpi_processor_get_performance_control(struct acpi_processor *pr)
{
	int result = 0;
	acpi_status status = 0;
	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
	union acpi_object *pct = NULL;
	union acpi_object obj = { 0 };

	status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
	if (ACPI_FAILURE(status)) {
		acpi_evaluation_failure_warn(pr->handle, "_PCT", status);
		return -ENODEV;
	}

	pct = (union acpi_object *)buffer.pointer;
	if (!pct || pct->type != ACPI_TYPE_PACKAGE || pct->package.count != 2) {
		pr_err("Invalid _PCT data\n");
		result = -EFAULT;
		goto end;
	}

	/*
	 * control_register
	 */

	obj = pct->package.elements[0];

	if (!obj.buffer.pointer || obj.type != ACPI_TYPE_BUFFER ||
	    obj.buffer.length < sizeof(struct acpi_pct_register)) {
		pr_err("Invalid _PCT data (control_register)\n");
		result = -EFAULT;
		goto end;
	}
	memcpy(&pr->performance->control_register, obj.buffer.pointer,
	       sizeof(struct acpi_pct_register));

	/*
	 * status_register
	 */

	obj = pct->package.elements[1];

	if (!obj.buffer.pointer || obj.type != ACPI_TYPE_BUFFER ||
	    obj.buffer.length < sizeof(struct acpi_pct_register)) {
		pr_err("Invalid _PCT data (status_register)\n");
		result = -EFAULT;
		goto end;
	}

	memcpy(&pr->performance->status_register, obj.buffer.pointer,
	       sizeof(struct acpi_pct_register));

end:
	kfree(buffer.pointer);

	return result;
}

/*
 * Some AMDs have 50MHz frequency multiples, but only provide 100MHz rounding
 * in their ACPI data. Calculate the real values and fix up the _PSS data.
 */
static void amd_fixup_frequency(struct acpi_processor_px *px, int i)
{
	struct msr val;
	u32 fid, did;
	int index = px->control & 0x00000007;

	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
		return;

	if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10) ||
	    boot_cpu_data.x86 == 0x11) {
		rdmsrq(MSR_AMD_PSTATE_DEF_BASE + index, val.q);
		/*
		 * MSR C001_0064+:
		 * Bit 63: PstateEn. Read-write. If set, the P-state is valid.
		 */
		if (!(val.h & BIT(31)))
			return;

		fid = val.l & 0x3f;
		did = (val.l >> 6) & 7;
		if (boot_cpu_data.x86 == 0x10)
			px->core_frequency = (100 * (fid + 0x10)) >> did;
		else
			px->core_frequency = (100 * (fid + 8)) >> did;
	}
}

static int acpi_processor_get_performance_states(struct acpi_processor *pr)
{
	int result = 0;
	acpi_status status = AE_OK;
	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
	struct acpi_buffer format = { sizeof("NNNNNN"), "NNNNNN" };
	struct acpi_buffer state = { 0, NULL };
	union acpi_object *pss = NULL;
	int i;
	int last_invalid = -1;

	status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
	if (ACPI_FAILURE(status)) {
		acpi_evaluation_failure_warn(pr->handle, "_PSS", status);
		return -ENODEV;
	}

	pss = buffer.pointer;
	if (!pss || pss->type != ACPI_TYPE_PACKAGE) {
		pr_err("Invalid _PSS data\n");
		result = -EFAULT;
		goto end;
	}

	acpi_handle_debug(pr->handle, "Found %d performance states\n",
			  pss->package.count);

	pr->performance->state_count = pss->package.count;
	pr->performance->states =
	    kmalloc_objs(struct acpi_processor_px, pss->package.count);
	if (!pr->performance->states) {
		result = -ENOMEM;
		goto end;
	}

	for (i = 0; i < pr->performance->state_count; i++) {

		struct acpi_processor_px *px = &(pr->performance->states[i]);

		state.length = sizeof(struct acpi_processor_px);
		state.pointer = px;

		acpi_handle_debug(pr->handle, "Extracting state %d\n", i);

		status = acpi_extract_package(&(pss->package.elements[i]),
					      &format, &state);
		if (ACPI_FAILURE(status)) {
			acpi_handle_warn(pr->handle, "Invalid _PSS data: %s\n",
					 acpi_format_exception(status));
			result = -EFAULT;
			kfree(pr->performance->states);
			goto end;
		}

		amd_fixup_frequency(px, i);

		acpi_handle_debug(pr->handle,
				  "State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n",
				  i,
				  (u32) px->core_frequency,
				  (u32) px->power,
				  (u32) px->transition_latency,
				  (u32) px->bus_master_latency,
				  (u32) px->control, (u32) px->status);

		/*
		 * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
		 */
		if (!px->core_frequency ||
		    (u32)(px->core_frequency * 1000) != px->core_frequency * 1000) {
			pr_err(FW_BUG
			       "Invalid BIOS _PSS frequency found for processor %d: 0x%llx MHz\n",
			       pr->id, px->core_frequency);
			if (last_invalid == -1)
				last_invalid = i;
		} else {
			if (last_invalid != -1) {
				/*
				 * Copy this valid entry over last_invalid entry
				 */
				memcpy(&(pr->performance->states[last_invalid]),
				       px, sizeof(struct acpi_processor_px));
				++last_invalid;
			}
		}
	}

	if (last_invalid == 0) {
		pr_err(FW_BUG
			   "No valid BIOS _PSS frequency found for processor %d\n", pr->id);
		result = -EFAULT;
		kfree(pr->performance->states);
		pr->performance->states = NULL;
	}

	if (last_invalid > 0)
		pr->performance->state_count = last_invalid;

end:
	kfree(buffer.pointer);

	return result;
}

int acpi_processor_get_performance_info(struct acpi_processor *pr)
{
	int result = 0;

	if (!pr || !pr->performance || !pr->handle)
		return -EINVAL;

	if (!acpi_has_method(pr->handle, "_PCT")) {
		acpi_handle_debug(pr->handle,
				  "ACPI-based processor performance control unavailable\n");
		return -ENODEV;
	}

	result = acpi_processor_get_performance_control(pr);
	if (result)
		goto update_bios;

	result = acpi_processor_get_performance_states(pr);
	if (result)
		goto update_bios;

	/* We need to call _PPC once when cpufreq starts */
	if (ignore_ppc != 1)
		result = acpi_processor_get_platform_limit(pr);

	return result;

	/*
	 * Having _PPC but missing frequencies (_PSS, _PCT) is a very good hint that
	 * the BIOS is older than the CPU and does not know its frequencies
	 */
 update_bios:
	if (acpi_has_method(pr->handle, "_PPC")) {
		if(boot_cpu_has(X86_FEATURE_EST))
			pr_warn(FW_BUG "BIOS needs update for CPU "
			       "frequency support\n");
	}
	return result;
}
EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info);

int acpi_processor_pstate_control(void)
{
	acpi_status status;

	if (!acpi_gbl_FADT.smi_command || !acpi_gbl_FADT.pstate_control)
		return 0;

	pr_debug("Writing pstate_control [0x%x] to smi_command [0x%x]\n",
		 acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command);

	status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
				    (u32)acpi_gbl_FADT.pstate_control, 8);
	if (ACPI_SUCCESS(status))
		return 1;

	pr_warn("Failed to write pstate_control [0x%x] to smi_command [0x%x]: %s\n",
		acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command,
		acpi_format_exception(status));
	return -EIO;
}

int acpi_processor_notify_smm(struct module *calling_module)
{
	static int is_done;
	int result = 0;

	if (!acpi_processor_cpufreq_init)
		return -EBUSY;

	if (!try_module_get(calling_module))
		return -EINVAL;

	/*
	 * is_done is set to negative if an error occurs and to 1 if no error
	 * occurrs, but SMM has been notified already. This avoids repeated
	 * notification which might lead to unexpected results.
	 */
	if (is_done != 0) {
		if (is_done < 0)
			result = is_done;

		goto out_put;
	}

	result = acpi_processor_pstate_control();
	if (result <= 0) {
		if (result) {
			is_done = result;
		} else {
			pr_debug("No SMI port or pstate_control\n");
			is_done = 1;
		}
		goto out_put;
	}

	is_done = 1;
	/*
	 * Success. If there _PPC, unloading the cpufreq driver would be risky,
	 * so disallow it in that case.
	 */
	if (acpi_processor_ppc_in_use)
		return 0;

out_put:
	module_put(calling_module);
	return result;
}
EXPORT_SYMBOL(acpi_processor_notify_smm);

int acpi_processor_get_psd(acpi_handle handle, struct acpi_psd_package *pdomain)
{
	int result = 0;
	acpi_status status = AE_OK;
	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
	struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
	struct acpi_buffer state = {0, NULL};
	union acpi_object  *psd = NULL;

	status = acpi_evaluate_object(handle, "_PSD", NULL, &buffer);
	if (ACPI_FAILURE(status)) {
		return -ENODEV;
	}

	psd = buffer.pointer;
	if (!psd || psd->type != ACPI_TYPE_PACKAGE) {
		pr_err("Invalid _PSD data\n");
		result = -EFAULT;
		goto end;
	}

	if (psd->package.count != 1) {
		pr_err("Invalid _PSD data\n");
		result = -EFAULT;
		goto end;
	}

	state.length = sizeof(struct acpi_psd_package);
	state.pointer = pdomain;

	status = acpi_extract_package(&(psd->package.elements[0]), &format, &state);
	if (ACPI_FAILURE(status)) {
		pr_err("Invalid _PSD data\n");
		result = -EFAULT;
		goto end;
	}

	if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
		pr_err("Unknown _PSD:num_entries\n");
		result = -EFAULT;
		goto end;
	}

	if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
		pr_err("Unknown _PSD:revision\n");
		result = -EFAULT;
		goto end;
	}

	if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
	    pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
	    pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
		pr_err("Invalid _PSD:coord_type\n");
		result = -EFAULT;
		goto end;
	}
end:
	kfree(buffer.pointer);
	return result;
}
EXPORT_SYMBOL(acpi_processor_get_psd);

int acpi_processor_preregister_performance(
		struct acpi_processor_performance __percpu *performance)
{
	int count_target;
	int retval = 0;
	unsigned int i, j;
	cpumask_var_t covered_cpus;
	struct acpi_processor *pr;
	struct acpi_psd_package *pdomain;
	struct acpi_processor *match_pr;
	struct acpi_psd_package *match_pdomain;

	if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
		return -ENOMEM;

	mutex_lock(&performance_mutex);

	/*
	 * Check if another driver has already registered, and abort before
	 * changing pr->performance if it has. Check input data as well.
	 */
	for_each_possible_cpu(i) {
		pr = per_cpu(processors, i);
		if (!pr) {
			/* Look only at processors in ACPI namespace */
			continue;
		}

		if (pr->performance) {
			retval = -EBUSY;
			goto err_out;
		}

		if (!performance || !per_cpu_ptr(performance, i)) {
			retval = -EINVAL;
			goto err_out;
		}
	}

	/* Call _PSD for all CPUs */
	for_each_possible_cpu(i) {
		pr = per_cpu(processors, i);
		if (!pr)
			continue;

		pr->performance = per_cpu_ptr(performance, i);
		pdomain = &(pr->performance->domain_info);
		if (acpi_processor_get_psd(pr->handle, pdomain)) {
			retval = -EINVAL;
			continue;
		}
	}
	if (retval)
		goto err_ret;

	/*
	 * Now that we have _PSD data from all CPUs, lets setup P-state
	 * domain info.
	 */
	for_each_possible_cpu(i) {
		pr = per_cpu(processors, i);
		if (!pr)
			continue;

		if (cpumask_test_cpu(i, covered_cpus))
			continue;

		pdomain = &(pr->performance->domain_info);
		cpumask_set_cpu(i, pr->performance->shared_cpu_map);
		cpumask_set_cpu(i, covered_cpus);
		if (pdomain->num_processors <= 1)
			continue;

		/* Validate the Domain info */
		count_target = pdomain->num_processors;
		if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
			pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ALL;
		else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
			pr->performance->shared_type = CPUFREQ_SHARED_TYPE_HW;
		else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
			pr->performance->shared_type = CPUFREQ_SHARED_TYPE_ANY;

		for_each_possible_cpu(j) {
			if (i == j)
				continue;

			match_pr = per_cpu(processors, j);
			if (!match_pr)
				continue;

			match_pdomain = &(match_pr->performance->domain_info);
			if (match_pdomain->domain != pdomain->domain)
				continue;

			/* Here i and j are in the same domain */

			if (match_pdomain->num_processors != count_target) {
				retval = -EINVAL;
				goto err_ret;
			}

			if (pdomain->coord_type != match_pdomain->coord_type) {
				retval = -EINVAL;
				goto err_ret;
			}

			cpumask_set_cpu(j, covered_cpus);
			cpumask_set_cpu(j, pr->performance->shared_cpu_map);
		}

		for_each_possible_cpu(j) {
			if (i == j)
				continue;

			match_pr = per_cpu(processors, j);
			if (!match_pr)
				continue;

			match_pdomain = &(match_pr->performance->domain_info);
			if (match_pdomain->domain != pdomain->domain)
				continue;

			match_pr->performance->shared_type =
					pr->performance->shared_type;
			cpumask_copy(match_pr->performance->shared_cpu_map,
				     pr->performance->shared_cpu_map);
		}
	}

err_ret:
	for_each_possible_cpu(i) {
		pr = per_cpu(processors, i);
		if (!pr || !pr->performance)
			continue;

		/* Assume no coordination on any error parsing domain info */
		if (retval) {
			cpumask_clear(pr->performance->shared_cpu_map);
			cpumask_set_cpu(i, pr->performance->shared_cpu_map);
			pr->performance->shared_type = CPUFREQ_SHARED_TYPE_NONE;
		}
		pr->performance = NULL; /* Will be set for real in register */
	}

err_out:
	mutex_unlock(&performance_mutex);
	free_cpumask_var(covered_cpus);
	return retval;
}
EXPORT_SYMBOL(acpi_processor_preregister_performance);

int acpi_processor_register_performance(struct acpi_processor_performance
					*performance, unsigned int cpu)
{
	struct acpi_processor *pr;

	if (!acpi_processor_cpufreq_init)
		return -EINVAL;

	mutex_lock(&performance_mutex);

	pr = per_cpu(processors, cpu);
	if (!pr) {
		mutex_unlock(&performance_mutex);
		return -ENODEV;
	}

	if (pr->performance) {
		mutex_unlock(&performance_mutex);
		return -EBUSY;
	}

	WARN_ON(!performance);

	pr->performance = performance;

	if (acpi_processor_get_performance_info(pr)) {
		pr->performance = NULL;
		mutex_unlock(&performance_mutex);
		return -EIO;
	}

	mutex_unlock(&performance_mutex);
	return 0;
}
EXPORT_SYMBOL(acpi_processor_register_performance);

void acpi_processor_unregister_performance(unsigned int cpu)
{
	struct acpi_processor *pr;

	mutex_lock(&performance_mutex);

	pr = per_cpu(processors, cpu);
	if (!pr)
		goto unlock;

	if (pr->performance)
		kfree(pr->performance->states);

	pr->performance = NULL;

unlock:
	mutex_unlock(&performance_mutex);
}
EXPORT_SYMBOL(acpi_processor_unregister_performance);
#endif