// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2018 Cadence Design Systems Inc.
 *
 * Author: Boris Brezillon <boris.brezillon@bootlin.com>
 */

#include <dt-bindings/i3c/i3c.h>
#include <linux/acpi.h>
#include <linux/atomic.h>
#include <linux/bitmap.h>
#include <linux/bug.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/export.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>

#include "internals.h"

static DEFINE_IDR(i3c_bus_idr);
static DEFINE_MUTEX(i3c_core_lock);
static int __i3c_first_dynamic_bus_num;
static BLOCKING_NOTIFIER_HEAD(i3c_bus_notifier);

/**
 * i3c_bus_maintenance_lock - Lock the bus for a maintenance operation
 * @bus: I3C bus to take the lock on
 *
 * This function takes the bus lock so that no other operations can occur on
 * the bus. This is needed for all kind of bus maintenance operation, like
 * - enabling/disabling slave events
 * - re-triggering DAA
 * - changing the dynamic address of a device
 * - relinquishing mastership
 * - ...
 *
 * The reason for this kind of locking is that we don't want drivers and core
 * logic to rely on I3C device information that could be changed behind their
 * back.
 */
static void i3c_bus_maintenance_lock(struct i3c_bus *bus)
{
	down_write(&bus->lock);
}

/**
 * i3c_bus_maintenance_unlock - Release the bus lock after a maintenance
 *			      operation
 * @bus: I3C bus to release the lock on
 *
 * Should be called when the bus maintenance operation is done. See
 * i3c_bus_maintenance_lock() for more details on what these maintenance
 * operations are.
 */
static void i3c_bus_maintenance_unlock(struct i3c_bus *bus)
{
	up_write(&bus->lock);
}

/**
 * i3c_bus_normaluse_lock - Lock the bus for a normal operation
 * @bus: I3C bus to take the lock on
 *
 * This function takes the bus lock for any operation that is not a maintenance
 * operation (see i3c_bus_maintenance_lock() for a non-exhaustive list of
 * maintenance operations). Basically all communications with I3C devices are
 * normal operations (HDR, SDR transfers or CCC commands that do not change bus
 * state or I3C dynamic address).
 *
 * Note that this lock is not guaranteeing serialization of normal operations.
 * In other words, transfer requests passed to the I3C master can be submitted
 * in parallel and I3C master drivers have to use their own locking to make
 * sure two different communications are not inter-mixed, or access to the
 * output/input queue is not done while the engine is busy.
 */
void i3c_bus_normaluse_lock(struct i3c_bus *bus)
{
	down_read(&bus->lock);
}

/**
 * i3c_bus_normaluse_unlock - Release the bus lock after a normal operation
 * @bus: I3C bus to release the lock on
 *
 * Should be called when a normal operation is done. See
 * i3c_bus_normaluse_lock() for more details on what these normal operations
 * are.
 */
void i3c_bus_normaluse_unlock(struct i3c_bus *bus)
{
	up_read(&bus->lock);
}

static struct i3c_master_controller *dev_to_i3cmaster(struct device *dev)
{
	return container_of(dev, struct i3c_master_controller, dev);
}

static int __must_check i3c_master_rpm_get(struct i3c_master_controller *master)
{
	int ret = master->rpm_allowed ? pm_runtime_resume_and_get(master->dev.parent) : 0;

	if (ret < 0) {
		dev_err(master->dev.parent, "runtime resume failed, error %d\n", ret);
		return ret;
	}
	return 0;
}

static void i3c_master_rpm_put(struct i3c_master_controller *master)
{
	if (master->rpm_allowed)
		pm_runtime_put_autosuspend(master->dev.parent);
}

int i3c_bus_rpm_get(struct i3c_bus *bus)
{
	return i3c_master_rpm_get(i3c_bus_to_i3c_master(bus));
}

void i3c_bus_rpm_put(struct i3c_bus *bus)
{
	i3c_master_rpm_put(i3c_bus_to_i3c_master(bus));
}

bool i3c_bus_rpm_ibi_allowed(struct i3c_bus *bus)
{
	return i3c_bus_to_i3c_master(bus)->rpm_ibi_allowed;
}

static const struct device_type i3c_device_type;

static struct i3c_bus *dev_to_i3cbus(struct device *dev)
{
	struct i3c_master_controller *master;

	if (dev->type == &i3c_device_type)
		return dev_to_i3cdev(dev)->bus;

	master = dev_to_i3cmaster(dev);

	return &master->bus;
}

static struct i3c_dev_desc *dev_to_i3cdesc(struct device *dev)
{
	struct i3c_master_controller *master;

	if (dev->type == &i3c_device_type)
		return dev_to_i3cdev(dev)->desc;

	master = dev_to_i3cmaster(dev);

	return master->this;
}

static ssize_t bcr_show(struct device *dev,
			struct device_attribute *da,
			char *buf)
{
	struct i3c_bus *bus = dev_to_i3cbus(dev);
	struct i3c_dev_desc *desc;
	ssize_t ret;

	i3c_bus_normaluse_lock(bus);
	desc = dev_to_i3cdesc(dev);
	ret = sysfs_emit(buf, "0x%02x\n", desc->info.bcr);
	i3c_bus_normaluse_unlock(bus);

	return ret;
}
static DEVICE_ATTR_RO(bcr);

static ssize_t dcr_show(struct device *dev,
			struct device_attribute *da,
			char *buf)
{
	struct i3c_bus *bus = dev_to_i3cbus(dev);
	struct i3c_dev_desc *desc;
	ssize_t ret;

	i3c_bus_normaluse_lock(bus);
	desc = dev_to_i3cdesc(dev);
	ret = sysfs_emit(buf, "0x%02x\n", desc->info.dcr);
	i3c_bus_normaluse_unlock(bus);

	return ret;
}
static DEVICE_ATTR_RO(dcr);

static ssize_t pid_show(struct device *dev,
			struct device_attribute *da,
			char *buf)
{
	struct i3c_bus *bus = dev_to_i3cbus(dev);
	struct i3c_dev_desc *desc;
	ssize_t ret;

	i3c_bus_normaluse_lock(bus);
	desc = dev_to_i3cdesc(dev);
	ret = sysfs_emit(buf, "%llx\n", desc->info.pid);
	i3c_bus_normaluse_unlock(bus);

	return ret;
}
static DEVICE_ATTR_RO(pid);

static ssize_t dynamic_address_show(struct device *dev,
				    struct device_attribute *da,
				    char *buf)
{
	struct i3c_bus *bus = dev_to_i3cbus(dev);
	struct i3c_dev_desc *desc;
	ssize_t ret;

	i3c_bus_normaluse_lock(bus);
	desc = dev_to_i3cdesc(dev);
	ret = sysfs_emit(buf, "%02x\n", desc->info.dyn_addr);
	i3c_bus_normaluse_unlock(bus);

	return ret;
}
static DEVICE_ATTR_RO(dynamic_address);

static const char * const hdrcap_strings[] = {
	"hdr-ddr", "hdr-tsp", "hdr-tsl",
};

static ssize_t hdrcap_show(struct device *dev,
			   struct device_attribute *da,
			   char *buf)
{
	struct i3c_bus *bus = dev_to_i3cbus(dev);
	struct i3c_dev_desc *desc;
	ssize_t offset = 0, ret;
	unsigned long caps;
	int mode;

	i3c_bus_normaluse_lock(bus);
	desc = dev_to_i3cdesc(dev);
	caps = desc->info.hdr_cap;
	for_each_set_bit(mode, &caps, 8) {
		if (mode >= ARRAY_SIZE(hdrcap_strings))
			break;

		if (!hdrcap_strings[mode])
			continue;

		ret = sysfs_emit_at(buf, offset, offset ? " %s" : "%s",
			      hdrcap_strings[mode]);
		if (ret < 0)
			goto out;

		offset += ret;
	}

	ret = sysfs_emit_at(buf, offset, "\n");
	if (ret < 0)
		goto out;

	ret = offset + ret;

out:
	i3c_bus_normaluse_unlock(bus);

	return ret;
}
static DEVICE_ATTR_RO(hdrcap);

static ssize_t modalias_show(struct device *dev,
			     struct device_attribute *da, char *buf)
{
	struct i3c_device *i3c = dev_to_i3cdev(dev);
	struct i3c_device_info devinfo;
	u16 manuf, part, ext;

	i3c_device_get_info(i3c, &devinfo);
	manuf = I3C_PID_MANUF_ID(devinfo.pid);
	part = I3C_PID_PART_ID(devinfo.pid);
	ext = I3C_PID_EXTRA_INFO(devinfo.pid);

	if (I3C_PID_RND_LOWER_32BITS(devinfo.pid))
		return sysfs_emit(buf, "i3c:dcr%02Xmanuf%04X\n", devinfo.dcr,
			       manuf);

	return sysfs_emit(buf, "i3c:dcr%02Xmanuf%04Xpart%04Xext%04X\n",
		       devinfo.dcr, manuf, part, ext);
}
static DEVICE_ATTR_RO(modalias);

static struct attribute *i3c_device_attrs[] = {
	&dev_attr_bcr.attr,
	&dev_attr_dcr.attr,
	&dev_attr_pid.attr,
	&dev_attr_dynamic_address.attr,
	&dev_attr_hdrcap.attr,
	&dev_attr_modalias.attr,
	NULL,
};
ATTRIBUTE_GROUPS(i3c_device);

static int i3c_device_uevent(const struct device *dev, struct kobj_uevent_env *env)
{
	const struct i3c_device *i3cdev = dev_to_i3cdev(dev);
	struct i3c_device_info devinfo;
	u16 manuf, part, ext;

	i3c_device_get_info(i3cdev, &devinfo);
	manuf = I3C_PID_MANUF_ID(devinfo.pid);
	part = I3C_PID_PART_ID(devinfo.pid);
	ext = I3C_PID_EXTRA_INFO(devinfo.pid);

	if (I3C_PID_RND_LOWER_32BITS(devinfo.pid))
		return add_uevent_var(env, "MODALIAS=i3c:dcr%02Xmanuf%04X",
				      devinfo.dcr, manuf);

	return add_uevent_var(env,
			      "MODALIAS=i3c:dcr%02Xmanuf%04Xpart%04Xext%04X",
			      devinfo.dcr, manuf, part, ext);
}

static const struct device_type i3c_device_type = {
	.groups	= i3c_device_groups,
	.uevent = i3c_device_uevent,
};

static int i3c_device_match(struct device *dev, const struct device_driver *drv)
{
	struct i3c_device *i3cdev;
	const struct i3c_driver *i3cdrv;
	u8 static_addr_method = 0;

	if (dev->type != &i3c_device_type)
		return 0;

	i3cdev = dev_to_i3cdev(dev);
	i3cdrv = drv_to_i3cdrv(drv);

	i3c_bus_normaluse_lock(i3cdev->bus);
	if (i3cdev->desc->boardinfo)
		static_addr_method = i3cdev->desc->boardinfo->static_addr_method;
	i3c_bus_normaluse_unlock(i3cdev->bus);

	/*
	 * SETAASA-based devices need not always have a matching ID since
	 * it is not mandatory for such devices to implement deviceinfo
	 * CCC commands. Allow them to register through DT or ACPI.
	 */
	if (i3cdrv->id_table && i3c_device_match_id(i3cdev, i3cdrv->id_table))
		return 1;

	if (static_addr_method & I3C_ADDR_METHOD_SETAASA) {
		if (of_driver_match_device(dev, drv))
			return 1;
		if (acpi_driver_match_device(dev, drv))
			return 1;
	}

	return 0;
}

static int i3c_device_probe(struct device *dev)
{
	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);

	return driver->probe(i3cdev);
}

static void i3c_device_remove(struct device *dev)
{
	struct i3c_device *i3cdev = dev_to_i3cdev(dev);
	struct i3c_driver *driver = drv_to_i3cdrv(dev->driver);

	if (driver->remove)
		driver->remove(i3cdev);
}

static enum i3c_addr_slot_status
i3c_bus_get_addr_slot_status_mask(struct i3c_bus *bus, u16 addr, u32 mask)
{
	unsigned long status;
	int bitpos = addr * I3C_ADDR_SLOT_STATUS_BITS;

	if (addr > I2C_MAX_ADDR)
		return I3C_ADDR_SLOT_RSVD;

	status = bus->addrslots[bitpos / BITS_PER_LONG];
	status >>= bitpos % BITS_PER_LONG;

	return status & mask;
}

static enum i3c_addr_slot_status
i3c_bus_get_addr_slot_status(struct i3c_bus *bus, u16 addr)
{
	return i3c_bus_get_addr_slot_status_mask(bus, addr, I3C_ADDR_SLOT_STATUS_MASK);
}

static void i3c_bus_set_addr_slot_status_mask(struct i3c_bus *bus, u16 addr,
					      enum i3c_addr_slot_status status, u32 mask)
{
	int bitpos = addr * I3C_ADDR_SLOT_STATUS_BITS;
	unsigned long *ptr;

	if (addr > I2C_MAX_ADDR)
		return;

	ptr = bus->addrslots + (bitpos / BITS_PER_LONG);
	*ptr &= ~((unsigned long)mask << (bitpos % BITS_PER_LONG));
	*ptr |= ((unsigned long)status & mask) << (bitpos % BITS_PER_LONG);
}

static void i3c_bus_set_addr_slot_status(struct i3c_bus *bus, u16 addr,
					 enum i3c_addr_slot_status status)
{
	i3c_bus_set_addr_slot_status_mask(bus, addr, status, I3C_ADDR_SLOT_STATUS_MASK);
}

static bool i3c_bus_dev_addr_is_avail(struct i3c_bus *bus, u8 addr)
{
	enum i3c_addr_slot_status status;

	status = i3c_bus_get_addr_slot_status(bus, addr);

	return status == I3C_ADDR_SLOT_FREE;
}

/*
 * ┌────┬─────────────┬───┬─────────┬───┐
 * │S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA  │ T ├────┐
 * └────┴─────────────┴───┴─────────┴───┘    │
 * ┌─────────────────────────────────────────┘
 * │  ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐
 * └─►│Sr│7'h7E RnW=1  │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│
 *    └──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘
 * Some master controllers (such as HCI) need to prepare the entire above transaction before
 * sending it out to the I3C bus. This means that a 7-bit dynamic address needs to be allocated
 * before knowing the target device's UID information.
 *
 * However, some I3C targets may request specific addresses (called as "init_dyn_addr"), which is
 * typically specified by the DT-'s assigned-address property. Lower addresses having higher IBI
 * priority. If it is available, i3c_bus_get_free_addr() preferably return a free address that is
 * not in the list of desired addresses (called as "init_dyn_addr"). This allows the device with
 * the "init_dyn_addr" to switch to its "init_dyn_addr" when it hot-joins the I3C bus. Otherwise,
 * if the "init_dyn_addr" is already in use by another I3C device, the target device will not be
 * able to switch to its desired address.
 *
 * If the previous step fails, fallback returning one of the remaining unassigned address,
 * regardless of its state in the desired list.
 */
static int i3c_bus_get_free_addr(struct i3c_bus *bus, u8 start_addr)
{
	enum i3c_addr_slot_status status;
	u8 addr;

	for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) {
		status = i3c_bus_get_addr_slot_status_mask(bus, addr,
							   I3C_ADDR_SLOT_EXT_STATUS_MASK);
		if (status == I3C_ADDR_SLOT_FREE)
			return addr;
	}

	for (addr = start_addr; addr < I3C_MAX_ADDR; addr++) {
		status = i3c_bus_get_addr_slot_status_mask(bus, addr,
							   I3C_ADDR_SLOT_STATUS_MASK);
		if (status == I3C_ADDR_SLOT_FREE)
			return addr;
	}

	return -ENOMEM;
}

static void i3c_bus_init_addrslots(struct i3c_bus *bus)
{
	int i;

	/* Addresses 0 to 7 are reserved. */
	for (i = 0; i < 8; i++)
		i3c_bus_set_addr_slot_status(bus, i, I3C_ADDR_SLOT_RSVD);

	/*
	 * Reserve broadcast address and all addresses that might collide
	 * with the broadcast address when facing a single bit error.
	 */
	i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR,
				     I3C_ADDR_SLOT_RSVD);
	for (i = 0; i < 7; i++)
		i3c_bus_set_addr_slot_status(bus, I3C_BROADCAST_ADDR ^ BIT(i),
					     I3C_ADDR_SLOT_RSVD);
}

static void i3c_bus_cleanup(struct i3c_bus *i3cbus)
{
	mutex_lock(&i3c_core_lock);
	idr_remove(&i3c_bus_idr, i3cbus->id);
	mutex_unlock(&i3c_core_lock);
}

static int i3c_bus_init(struct i3c_bus *i3cbus, struct fwnode_handle *fwnode)
{
	int ret, start, end, id = -1;

	init_rwsem(&i3cbus->lock);
	INIT_LIST_HEAD(&i3cbus->devs.i2c);
	INIT_LIST_HEAD(&i3cbus->devs.i3c);
	i3c_bus_init_addrslots(i3cbus);
	i3cbus->mode = I3C_BUS_MODE_PURE;

	if (fwnode && is_of_node(fwnode))
		id = of_alias_get_id(to_of_node(fwnode), "i3c");

	mutex_lock(&i3c_core_lock);
	if (id >= 0) {
		start = id;
		end = start + 1;
	} else {
		start = __i3c_first_dynamic_bus_num;
		end = 0;
	}

	ret = idr_alloc(&i3c_bus_idr, i3cbus, start, end, GFP_KERNEL);
	mutex_unlock(&i3c_core_lock);

	if (ret < 0)
		return ret;

	i3cbus->id = ret;

	return 0;
}

void i3c_for_each_bus_locked(int (*fn)(struct i3c_bus *bus, void *data),
			     void *data)
{
	struct i3c_bus *bus;
	int id;

	mutex_lock(&i3c_core_lock);
	idr_for_each_entry(&i3c_bus_idr, bus, id)
		fn(bus, data);
	mutex_unlock(&i3c_core_lock);
}
EXPORT_SYMBOL_GPL(i3c_for_each_bus_locked);

int i3c_register_notifier(struct notifier_block *nb)
{
	return blocking_notifier_chain_register(&i3c_bus_notifier, nb);
}
EXPORT_SYMBOL_GPL(i3c_register_notifier);

int i3c_unregister_notifier(struct notifier_block *nb)
{
	return blocking_notifier_chain_unregister(&i3c_bus_notifier, nb);
}
EXPORT_SYMBOL_GPL(i3c_unregister_notifier);

static void i3c_bus_notify(struct i3c_bus *bus, unsigned int action)
{
	blocking_notifier_call_chain(&i3c_bus_notifier, action, bus);
}

static const char * const i3c_bus_mode_strings[] = {
	[I3C_BUS_MODE_PURE] = "pure",
	[I3C_BUS_MODE_MIXED_FAST] = "mixed-fast",
	[I3C_BUS_MODE_MIXED_LIMITED] = "mixed-limited",
	[I3C_BUS_MODE_MIXED_SLOW] = "mixed-slow",
};

static ssize_t mode_show(struct device *dev,
			 struct device_attribute *da,
			 char *buf)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	ssize_t ret;

	i3c_bus_normaluse_lock(i3cbus);
	if (i3cbus->mode < 0 ||
	    i3cbus->mode >= ARRAY_SIZE(i3c_bus_mode_strings) ||
	    !i3c_bus_mode_strings[i3cbus->mode])
		ret = sysfs_emit(buf, "unknown\n");
	else
		ret = sysfs_emit(buf, "%s\n", i3c_bus_mode_strings[i3cbus->mode]);
	i3c_bus_normaluse_unlock(i3cbus);

	return ret;
}
static DEVICE_ATTR_RO(mode);

static ssize_t current_master_show(struct device *dev,
				   struct device_attribute *da,
				   char *buf)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	ssize_t ret;

	i3c_bus_normaluse_lock(i3cbus);
	ret = sysfs_emit(buf, "%d-%llx\n", i3cbus->id,
		      i3cbus->cur_master->info.pid);
	i3c_bus_normaluse_unlock(i3cbus);

	return ret;
}
static DEVICE_ATTR_RO(current_master);

static ssize_t i3c_scl_frequency_show(struct device *dev,
				      struct device_attribute *da,
				      char *buf)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	ssize_t ret;

	i3c_bus_normaluse_lock(i3cbus);
	ret = sysfs_emit(buf, "%ld\n", i3cbus->scl_rate.i3c);
	i3c_bus_normaluse_unlock(i3cbus);

	return ret;
}
static DEVICE_ATTR_RO(i3c_scl_frequency);

static ssize_t i2c_scl_frequency_show(struct device *dev,
				      struct device_attribute *da,
				      char *buf)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	ssize_t ret;

	i3c_bus_normaluse_lock(i3cbus);
	ret = sysfs_emit(buf, "%ld\n", i3cbus->scl_rate.i2c);
	i3c_bus_normaluse_unlock(i3cbus);

	return ret;
}
static DEVICE_ATTR_RO(i2c_scl_frequency);

static void i3c_master_hj_work_fn(struct work_struct *work)
{
	struct i3c_master_controller *master = container_of(work, typeof(*master), hj_work);

	if (!master->shutting_down)
		i3c_master_do_daa(master);
}

static int i3c_set_hotjoin(struct i3c_master_controller *master, bool enable)
{
	int ret;

	if (!master || !master->ops)
		return -EINVAL;

	if (!master->ops->enable_hotjoin || !master->ops->disable_hotjoin)
		return -EINVAL;

	if (enable || master->rpm_ibi_allowed) {
		ret = i3c_master_rpm_get(master);
		if (ret)
			return ret;
	}

	i3c_bus_maintenance_lock(&master->bus);

	if (master->shutting_down)
		ret = -ENODEV;
	else if (enable)
		ret = master->ops->enable_hotjoin(master);
	else
		ret = master->ops->disable_hotjoin(master);

	if (!ret)
		master->hotjoin = enable;

	i3c_bus_maintenance_unlock(&master->bus);

	if ((enable && ret) || (!enable && !ret) || master->rpm_ibi_allowed)
		i3c_master_rpm_put(master);

	return ret;
}

static ssize_t hotjoin_store(struct device *dev, struct device_attribute *attr,
			     const char *buf, size_t count)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	int ret;
	bool res;

	if (!i3cbus->cur_master)
		return -EINVAL;

	if (kstrtobool(buf, &res))
		return -EINVAL;

	ret = i3c_set_hotjoin(i3cbus->cur_master->common.master, res);
	if (ret)
		return ret;

	return count;
}

/*
 * i3c_master_enable_hotjoin - Enable hotjoin
 * @master: I3C master object
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
int i3c_master_enable_hotjoin(struct i3c_master_controller *master)
{
	return i3c_set_hotjoin(master, true);
}
EXPORT_SYMBOL_GPL(i3c_master_enable_hotjoin);

/*
 * i3c_master_disable_hotjoin - Disable hotjoin
 * @master: I3C master object
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
int i3c_master_disable_hotjoin(struct i3c_master_controller *master)
{
	return i3c_set_hotjoin(master, false);
}
EXPORT_SYMBOL_GPL(i3c_master_disable_hotjoin);

/**
 * i3c_master_queue_hotjoin - Queue DAA processing after a Hot-Join event
 * @master: I3C master object
 *
 * Queue the hot-join worker on the master's workqueue.
 */
void i3c_master_queue_hotjoin(struct i3c_master_controller *master)
{
	queue_work(master->wq, &master->hj_work);
}
EXPORT_SYMBOL_GPL(i3c_master_queue_hotjoin);

static ssize_t hotjoin_show(struct device *dev, struct device_attribute *da, char *buf)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	ssize_t ret;

	i3c_bus_normaluse_lock(i3cbus);
	ret = sysfs_emit(buf, "%d\n", i3cbus->cur_master->common.master->hotjoin);
	i3c_bus_normaluse_unlock(i3cbus);

	return ret;
}

static DEVICE_ATTR_RW(hotjoin);

static ssize_t dev_nack_retry_count_show(struct device *dev,
					 struct device_attribute *attr, char *buf)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	ssize_t ret;

	i3c_bus_normaluse_lock(i3cbus);
	ret = sysfs_emit(buf, "%u\n", dev_to_i3cmaster(dev)->dev_nack_retry_count);
	i3c_bus_normaluse_unlock(i3cbus);

	return ret;
}

static ssize_t dev_nack_retry_count_store(struct device *dev,
					  struct device_attribute *attr,
					  const char *buf, size_t count)
{
	struct i3c_bus *i3cbus = dev_to_i3cbus(dev);
	struct i3c_master_controller *master = dev_to_i3cmaster(dev);
	unsigned int val;
	int ret;

	ret = kstrtouint(buf, 0, &val);
	if (ret)
		return ret;

	ret = i3c_master_rpm_get(master);
	if (ret)
		return ret;

	i3c_bus_maintenance_lock(i3cbus);
	ret = master->ops->set_dev_nack_retry(master, val);
	if (!ret)
		master->dev_nack_retry_count = val;
	i3c_bus_maintenance_unlock(i3cbus);

	i3c_master_rpm_put(master);

	return ret ?: count;
}

static DEVICE_ATTR_RW(dev_nack_retry_count);

static ssize_t do_daa_store(struct device *dev,
			    struct device_attribute *attr,
			    const char *buf, size_t count)
{
	struct i3c_master_controller *master = dev_to_i3cmaster(dev);
	bool val;
	int ret;

	if (kstrtobool(buf, &val))
		return -EINVAL;

	if (!val)
		return -EINVAL;

	if (!master->init_done)
		return -EAGAIN;

	ret = i3c_master_do_daa(master);
	if (ret)
		return ret;

	return count;
}

static DEVICE_ATTR_WO(do_daa);

static struct attribute *i3c_masterdev_attrs[] = {
	&dev_attr_mode.attr,
	&dev_attr_current_master.attr,
	&dev_attr_i3c_scl_frequency.attr,
	&dev_attr_i2c_scl_frequency.attr,
	&dev_attr_bcr.attr,
	&dev_attr_dcr.attr,
	&dev_attr_pid.attr,
	&dev_attr_dynamic_address.attr,
	&dev_attr_hdrcap.attr,
	&dev_attr_hotjoin.attr,
	&dev_attr_do_daa.attr,
	NULL,
};
ATTRIBUTE_GROUPS(i3c_masterdev);

static void i3c_master_free_i3c_dev(struct i3c_dev_desc *dev)
{
	kfree(dev);
}

static void i3c_masterdev_release(struct device *dev)
{
	struct i3c_master_controller *master = dev_to_i3cmaster(dev);
	struct i3c_bus *bus = dev_to_i3cbus(dev);

	if (master->wq)
		destroy_workqueue(master->wq);

	WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c));
	i3c_bus_cleanup(bus);

	fwnode_handle_put(dev->fwnode);

	i3c_master_free_i3c_dev(master->this);
}

static const struct device_type i3c_masterdev_type = {
	.groups	= i3c_masterdev_groups,
};

static void i3c_master_shutdown(struct i3c_master_controller *master)
{
	i3c_bus_maintenance_lock(&master->bus);
	master->shutting_down = true;
	i3c_bus_maintenance_unlock(&master->bus);

	cancel_work_sync(&master->hj_work);
	cancel_work_sync(&master->reg_work);
}

static void i3c_device_shutdown(struct device *dev)
{
	if (dev->type == &i3c_masterdev_type)
		i3c_master_shutdown(dev_to_i3cmaster(dev));
}

const struct bus_type i3c_bus_type = {
	.name = "i3c",
	.match = i3c_device_match,
	.probe = i3c_device_probe,
	.remove = i3c_device_remove,
	.shutdown = i3c_device_shutdown,
};
EXPORT_SYMBOL_GPL(i3c_bus_type);

static int i3c_bus_set_mode(struct i3c_bus *i3cbus, enum i3c_bus_mode mode,
			    unsigned long max_i2c_scl_rate)
{
	struct i3c_master_controller *master = i3c_bus_to_i3c_master(i3cbus);

	i3cbus->mode = mode;

	switch (i3cbus->mode) {
	case I3C_BUS_MODE_PURE:
		if (!i3cbus->scl_rate.i3c)
			i3cbus->scl_rate.i3c = I3C_BUS_I3C_SCL_TYP_RATE;
		break;
	case I3C_BUS_MODE_MIXED_FAST:
	case I3C_BUS_MODE_MIXED_LIMITED:
		if (!i3cbus->scl_rate.i3c)
			i3cbus->scl_rate.i3c = I3C_BUS_I3C_SCL_TYP_RATE;
		if (!i3cbus->scl_rate.i2c)
			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
		break;
	case I3C_BUS_MODE_MIXED_SLOW:
		if (!i3cbus->scl_rate.i2c)
			i3cbus->scl_rate.i2c = max_i2c_scl_rate;
		if (!i3cbus->scl_rate.i3c ||
		    i3cbus->scl_rate.i3c > i3cbus->scl_rate.i2c)
			i3cbus->scl_rate.i3c = i3cbus->scl_rate.i2c;
		break;
	default:
		return -EINVAL;
	}

	dev_dbg(&master->dev, "i2c-scl = %ld Hz i3c-scl = %ld Hz\n",
		i3cbus->scl_rate.i2c, i3cbus->scl_rate.i3c);

	/*
	 * I3C/I2C frequency may have been overridden, check that user-provided
	 * values are not exceeding max possible frequency.
	 */
	if (i3cbus->scl_rate.i3c > I3C_BUS_I3C_SCL_MAX_RATE ||
	    i3cbus->scl_rate.i2c > I3C_BUS_I2C_FM_PLUS_SCL_MAX_RATE)
		return -EINVAL;

	return 0;
}

static struct i3c_master_controller *
i2c_adapter_to_i3c_master(struct i2c_adapter *adap)
{
	return container_of(adap, struct i3c_master_controller, i2c);
}

static struct i2c_adapter *
i3c_master_to_i2c_adapter(struct i3c_master_controller *master)
{
	return &master->i2c;
}

static void i3c_master_free_i2c_dev(struct i2c_dev_desc *dev)
{
	kfree(dev);
}

static struct i2c_dev_desc *
i3c_master_alloc_i2c_dev(struct i3c_master_controller *master,
			 u16 addr, u8 lvr)
{
	struct i2c_dev_desc *dev;

	dev = kzalloc_obj(*dev);
	if (!dev)
		return ERR_PTR(-ENOMEM);

	dev->common.master = master;
	dev->addr = addr;
	dev->lvr = lvr;

	return dev;
}

static void *i3c_ccc_cmd_dest_init(struct i3c_ccc_cmd_dest *dest, u8 addr,
				   u16 payloadlen)
{
	dest->addr = addr;
	dest->payload.len = payloadlen;
	dest->payload.actual_len = 0;
	dest->payload.optional_bytes = 0;
	if (payloadlen)
		dest->payload.data = kzalloc(payloadlen, GFP_KERNEL);
	else
		dest->payload.data = NULL;

	return dest->payload.data;
}

static void i3c_ccc_cmd_dest_cleanup(struct i3c_ccc_cmd_dest *dest)
{
	kfree(dest->payload.data);
}

static void i3c_ccc_cmd_init_retries(struct i3c_ccc_cmd *cmd, bool rnw, u8 id,
				     struct i3c_ccc_cmd_dest *dests,
				     unsigned int ndests, unsigned int retries)
{
	cmd->rnw = rnw ? 1 : 0;
	cmd->id = id;
	cmd->dests = dests;
	cmd->ndests = ndests;
	cmd->retries = retries;
	cmd->err = I3C_ERROR_UNKNOWN;
}

static void i3c_ccc_cmd_init(struct i3c_ccc_cmd *cmd, bool rnw, u8 id,
			     struct i3c_ccc_cmd_dest *dests,
			     unsigned int ndests)
{
	i3c_ccc_cmd_init_retries(cmd, rnw, id, dests, ndests,
				 rnw ? I3C_CCC_RETRIES : 0);
}

static int i3c_ccc_validate_payload_len(struct i3c_ccc_cmd *cmd)
{
	unsigned int i;

	if (!cmd->rnw)
		return 0;

	for (i = 0; i < cmd->ndests; i++) {
		struct i3c_ccc_cmd_payload *p = &cmd->dests[i].payload;
		u16 min_len;

		if (p->optional_bytes > p->len)
			return -EINVAL;

		if (p->actual_len > p->len)
			return -EIO;

		if (!p->len)
			continue;

		min_len = p->len - p->optional_bytes;
		if (p->actual_len < min_len)
			return -EIO;
	}

	return 0;
}

/**
 * i3c_master_send_ccc_cmd_locked() - send a CCC (Common Command Codes)
 * @master: master used to send frames on the bus
 * @cmd: command to send
 *
 * Return: 0 in case of success, or a negative error code otherwise.
 *         I3C Mx error codes are stored in cmd->err.
 */
static int i3c_master_send_ccc_cmd_locked(struct i3c_master_controller *master,
					  struct i3c_ccc_cmd *cmd)
{
	unsigned int attempt, max_attempts;
	int ret;

	if (!cmd || !master)
		return -EINVAL;

	if (WARN_ON(master->init_done &&
		    !rwsem_is_locked(&master->bus.lock)))
		return -EINVAL;

	if (!master->ops->send_ccc_cmd)
		return -EOPNOTSUPP;

	if ((cmd->rnw || (cmd->id & I3C_CCC_DIRECT)) &&
	    (!cmd->dests || !cmd->ndests))
		return -EINVAL;

	if (master->ops->supports_ccc_cmd &&
	    !master->ops->supports_ccc_cmd(master, cmd))
		return -EOPNOTSUPP;

	max_attempts = cmd->retries + 1;
	ret = -EIO;
	for (attempt = 0; attempt < max_attempts; attempt++) {
		unsigned int i;

		if (cmd->rnw)
			for (i = 0; i < cmd->ndests; i++)
				cmd->dests[i].payload.actual_len = 0;

		cmd->err = I3C_ERROR_UNKNOWN;
		ret = master->ops->send_ccc_cmd(master, cmd);
		if (!ret && cmd->err == I3C_ERROR_UNKNOWN)
			break;
	}

	if (!ret)
		ret = i3c_ccc_validate_payload_len(cmd);

	return ret;
}

static struct i2c_dev_desc *
i3c_master_find_i2c_dev_by_addr(const struct i3c_master_controller *master,
				u16 addr)
{
	struct i2c_dev_desc *dev;

	i3c_bus_for_each_i2cdev(&master->bus, dev) {
		if (dev->addr == addr)
			return dev;
	}

	return NULL;
}

/**
 * i3c_master_get_free_addr() - get a free address on the bus
 * @master: I3C master object
 * @start_addr: where to start searching
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: the first free address starting at @start_addr (included) or -ENOMEM
 * if there's no more address available.
 */
int i3c_master_get_free_addr(struct i3c_master_controller *master,
			     u8 start_addr)
{
	return i3c_bus_get_free_addr(&master->bus, start_addr);
}
EXPORT_SYMBOL_GPL(i3c_master_get_free_addr);

static void i3c_device_release(struct device *dev)
{
	struct i3c_device *i3cdev = dev_to_i3cdev(dev);

	WARN_ON(i3cdev->desc);

	fwnode_handle_put(dev->fwnode);
	kfree(i3cdev);
}

static struct i3c_dev_desc *
i3c_master_alloc_i3c_dev(struct i3c_master_controller *master,
			 const struct i3c_device_info *info)
{
	struct i3c_dev_desc *dev;

	dev = kzalloc_obj(*dev);
	if (!dev)
		return ERR_PTR(-ENOMEM);

	dev->common.master = master;
	dev->info = *info;
	mutex_init(&dev->ibi_lock);

	return dev;
}

static int i3c_master_rstdaa_locked(struct i3c_master_controller *master,
				    u8 addr)
{
	enum i3c_addr_slot_status addrstat;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	if (!master)
		return -EINVAL;

	addrstat = i3c_bus_get_addr_slot_status(&master->bus, addr);
	if (addr != I3C_BROADCAST_ADDR && addrstat != I3C_ADDR_SLOT_I3C_DEV)
		return -EINVAL;

	i3c_ccc_cmd_dest_init(&dest, addr, 0);
	i3c_ccc_cmd_init(&cmd, false,
			 I3C_CCC_RSTDAA(addr == I3C_BROADCAST_ADDR),
			 &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);

	/* No active devices on the bus. */
	if (ret && cmd.err == I3C_ERROR_M2)
		ret = 0;

	return ret;
}

/**
 * i3c_master_setaasa_locked() - start a SETAASA procedure (Set All Addresses to Static Address)
 * @master: I3C master object
 *
 * Send a SETAASA CCC command to set all attached I3C devices' dynamic addresses to
 * their static address.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * First, the SETHID CCC command is sent, followed by the SETAASA CCC.
 *
 * Return: 0 in case of success, a positive I3C error code if the error is
 * one of the official Mx error codes, and a negative error code otherwise.
 */
static int i3c_master_setaasa_locked(struct i3c_master_controller *master)
{
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	/*
	 * Send SETHID CCC command. Though it is a standard CCC command specified
	 * in JESD300-5, we are not defining a separate macro to be explicit that
	 * the value falls under the vendor specific range.
	 */
	i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0);
	i3c_ccc_cmd_init(&cmd, false, I3C_CCC_VENDOR(0, true), &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);
	if (ret && cmd.err == I3C_ERROR_M2)
		ret = 0;
	if (ret)
		return ret;

	/* Send SETAASA CCC command */
	i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0);
	i3c_ccc_cmd_init(&cmd, false, I3C_CCC_SETAASA, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);
	if (ret && cmd.err == I3C_ERROR_M2)
		ret = 0;

	return ret;
}

/**
 * i3c_master_entdaa_locked() - start a DAA (Dynamic Address Assignment)
 *				procedure
 * @master: master used to send frames on the bus
 *
 * Send a ENTDAA CCC command to start a DAA procedure.
 *
 * Note that this function only sends the ENTDAA CCC command, all the logic
 * behind dynamic address assignment has to be handled in the I3C master
 * driver.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, or a negative error code otherwise.
 */
int i3c_master_entdaa_locked(struct i3c_master_controller *master)
{
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR, 0);
	i3c_ccc_cmd_init(&cmd, false, I3C_CCC_ENTDAA, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);

	/* No active devices need an address. */
	if (ret && cmd.err == I3C_ERROR_M2)
		ret = 0;

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_entdaa_locked);

/**
 * i3c_master_enec_disec_locked() - send an ENEC or DISEC CCC command
 * @master: master used to send frames on the bus
 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
 * @enable: true to send ENEC, false to send DISEC
 * @evts: events to enable or disable
 * @suppress_m2: if true, treat an M2 (NACK) error from the CCC as success
 *
 * Send an ENEC or DISEC CCC command to enable or disable some or all events
 * coming from a specific slave, or all devices if @addr is
 * %I3C_BROADCAST_ADDR.
 *
 * When @suppress_m2 is true, a NACK of the broadcast (which can happen when
 * no devices are present on the bus) is not reported as an error. This is
 * useful for callers that want to configure event reporting unconditionally,
 * regardless of whether any devices are currently on the bus.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, or a negative error code otherwise.
 */
int i3c_master_enec_disec_locked(struct i3c_master_controller *master, u8 addr,
				 bool enable, u8 evts, bool suppress_m2)
{
	struct i3c_ccc_events *events;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	events = i3c_ccc_cmd_dest_init(&dest, addr, sizeof(*events));
	if (!events)
		return -ENOMEM;

	events->events = evts;
	i3c_ccc_cmd_init(&cmd, false,
			 enable ?
			 I3C_CCC_ENEC(addr == I3C_BROADCAST_ADDR) :
			 I3C_CCC_DISEC(addr == I3C_BROADCAST_ADDR),
			 &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);

	if (suppress_m2 && ret && cmd.err == I3C_ERROR_M2)
		ret = 0;

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_enec_disec_locked);

/**
 * i3c_master_disec_locked() - send a DISEC CCC command
 * @master: master used to send frames on the bus
 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
 * @evts: events to disable
 *
 * Send a DISEC CCC command to disable some or all events coming from a
 * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, or a negative error code otherwise.
 */
int i3c_master_disec_locked(struct i3c_master_controller *master, u8 addr,
			    u8 evts)
{
	return i3c_master_enec_disec_locked(master, addr, false, evts, false);
}
EXPORT_SYMBOL_GPL(i3c_master_disec_locked);

/**
 * i3c_master_enec_locked() - send an ENEC CCC command
 * @master: master used to send frames on the bus
 * @addr: a valid I3C slave address or %I3C_BROADCAST_ADDR
 * @evts: events to disable
 *
 * Sends an ENEC CCC command to enable some or all events coming from a
 * specific slave, or all devices if @addr is %I3C_BROADCAST_ADDR.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, or a negative error code otherwise.
 */
int i3c_master_enec_locked(struct i3c_master_controller *master, u8 addr,
			   u8 evts)
{
	return i3c_master_enec_disec_locked(master, addr, true, evts, false);
}
EXPORT_SYMBOL_GPL(i3c_master_enec_locked);

/**
 * i3c_master_defslvs_locked() - send a DEFSLVS CCC command
 * @master: master used to send frames on the bus
 *
 * Send a DEFSLVS CCC command containing all the devices known to the @master.
 * This is useful when you have secondary masters on the bus to propagate
 * device information.
 *
 * This should be called after all I3C devices have been discovered (in other
 * words, after the DAA procedure has finished) and instantiated in
 * &i3c_master_controller_ops->bus_init().
 * It should also be called if a master ACKed an Hot-Join request and assigned
 * a dynamic address to the device joining the bus.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 in case of success, or a negative error code otherwise.
 */
int i3c_master_defslvs_locked(struct i3c_master_controller *master)
{
	struct i3c_ccc_defslvs *defslvs;
	struct i3c_ccc_dev_desc *desc;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_dev_desc *i3cdev;
	struct i2c_dev_desc *i2cdev;
	struct i3c_ccc_cmd cmd;
	struct i3c_bus *bus;
	bool send = false;
	int ndevs = 0, ret;

	if (!master)
		return -EINVAL;

	bus = i3c_master_get_bus(master);
	i3c_bus_for_each_i3cdev(bus, i3cdev) {
		ndevs++;

		if (i3cdev == master->this)
			continue;

		if (I3C_BCR_DEVICE_ROLE(i3cdev->info.bcr) ==
		    I3C_BCR_I3C_MASTER)
			send = true;
	}

	/* No other master on the bus, skip DEFSLVS. */
	if (!send)
		return 0;

	i3c_bus_for_each_i2cdev(bus, i2cdev)
		ndevs++;

	defslvs = i3c_ccc_cmd_dest_init(&dest, I3C_BROADCAST_ADDR,
					struct_size(defslvs, slaves,
						    ndevs - 1));
	if (!defslvs)
		return -ENOMEM;

	defslvs->count = ndevs;
	defslvs->master.bcr = master->this->info.bcr;
	defslvs->master.dcr = master->this->info.dcr;
	defslvs->master.dyn_addr = master->this->info.dyn_addr << 1;
	defslvs->master.static_addr = I3C_BROADCAST_ADDR << 1;

	desc = defslvs->slaves;
	i3c_bus_for_each_i2cdev(bus, i2cdev) {
		desc->lvr = i2cdev->lvr;
		desc->static_addr = i2cdev->addr << 1;
		desc++;
	}

	i3c_bus_for_each_i3cdev(bus, i3cdev) {
		/* Skip the I3C dev representing this master. */
		if (i3cdev == master->this)
			continue;

		desc->bcr = i3cdev->info.bcr;
		desc->dcr = i3cdev->info.dcr;
		desc->dyn_addr = i3cdev->info.dyn_addr << 1;
		desc->static_addr = i3cdev->info.static_addr << 1;
		desc++;
	}

	i3c_ccc_cmd_init(&cmd, false, I3C_CCC_DEFSLVS, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_defslvs_locked);

static int i3c_master_setda_locked(struct i3c_master_controller *master,
				   u8 oldaddr, u8 newaddr, bool setdasa)
{
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_setda *setda;
	struct i3c_ccc_cmd cmd;
	int ret;

	if (!oldaddr || !newaddr)
		return -EINVAL;

	setda = i3c_ccc_cmd_dest_init(&dest, oldaddr, sizeof(*setda));
	if (!setda)
		return -ENOMEM;

	setda->addr = newaddr << 1;
	i3c_ccc_cmd_init(&cmd, false,
			 setdasa ? I3C_CCC_SETDASA : I3C_CCC_SETNEWDA,
			 &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_setdasa_locked(struct i3c_master_controller *master,
				     u8 static_addr, u8 dyn_addr)
{
	return i3c_master_setda_locked(master, static_addr, dyn_addr, true);
}

static int i3c_master_setnewda_locked(struct i3c_master_controller *master,
				      u8 oldaddr, u8 newaddr)
{
	return i3c_master_setda_locked(master, oldaddr, newaddr, false);
}

static int i3c_master_getmrl_locked(struct i3c_master_controller *master,
				    struct i3c_device_info *info)
{
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_mrl *mrl;
	struct i3c_ccc_cmd cmd;
	int ret;

	mrl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mrl));
	if (!mrl)
		return -ENOMEM;

	/*
	 * GETMRL returns 2 bytes (max read length) when the device does not
	 * advertise IBI payload, or 2 or 3 bytes when it does (the optional
	 * third byte is max IBI length). Use optional_bytes to allow either
	 * length when IBI payload is supported.
	 */
	if (info->bcr & I3C_BCR_IBI_PAYLOAD)
		dest.payload.optional_bytes = 1;
	else
		dest.payload.len -= 1;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMRL, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	switch (dest.payload.actual_len) {
	case 3:
		info->max_ibi_len = mrl->ibi_len;
		fallthrough;
	case 2:
		info->max_read_len = be16_to_cpu(mrl->read_len);
		break;
	default:
		ret = -EIO;
		goto out;
	}

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_getmwl_locked(struct i3c_master_controller *master,
				    struct i3c_device_info *info)
{
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_mwl *mwl;
	struct i3c_ccc_cmd cmd;
	int ret;

	mwl = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*mwl));
	if (!mwl)
		return -ENOMEM;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMWL, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	if (dest.payload.actual_len != sizeof(*mwl)) {
		ret = -EIO;
		goto out;
	}

	info->max_write_len = be16_to_cpu(mwl->len);

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_getmxds_locked(struct i3c_master_controller *master,
				     struct i3c_device_info *info)
{
	struct i3c_ccc_getmxds *getmaxds;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	getmaxds = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr,
					 sizeof(*getmaxds));
	if (!getmaxds)
		return -ENOMEM;

	dest.payload.optional_bytes = 3;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMXDS, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret) {
		/*
		 * optional_bytes = 3 accepts a 2-byte response on the first
		 * attempt, so this fallback runs only when the 5-byte request
		 * fails rather than returning a short read.
		 */
		dest.payload.len -= 3;
		dest.payload.optional_bytes = 0;
		i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETMXDS, &dest, 1);
		ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
		if (ret)
			goto out;
	}

	if (dest.payload.actual_len != 2 && dest.payload.actual_len != 5) {
		ret = -EIO;
		goto out;
	}

	info->max_read_ds = getmaxds->maxrd;
	info->max_write_ds = getmaxds->maxwr;
	if (dest.payload.actual_len == 5)
		info->max_read_turnaround = getmaxds->maxrdturn[0] |
					    ((u32)getmaxds->maxrdturn[1] << 8) |
					    ((u32)getmaxds->maxrdturn[2] << 16);

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_gethdrcap_locked(struct i3c_master_controller *master,
				       struct i3c_device_info *info)
{
	struct i3c_ccc_gethdrcap *gethdrcap;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	gethdrcap = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr,
					  sizeof(*gethdrcap));
	if (!gethdrcap)
		return -ENOMEM;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETHDRCAP, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	if (dest.payload.actual_len != 1) {
		ret = -EIO;
		goto out;
	}

	info->hdr_cap = gethdrcap->modes;

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_getpid_locked(struct i3c_master_controller *master,
				    struct i3c_device_info *info)
{
	struct i3c_ccc_getpid *getpid;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret, i;

	getpid = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getpid));
	if (!getpid)
		return -ENOMEM;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETPID, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	info->pid = 0;
	for (i = 0; i < sizeof(getpid->pid); i++) {
		int sft = (sizeof(getpid->pid) - i - 1) * 8;

		info->pid |= (u64)getpid->pid[i] << sft;
	}

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_getbcr_locked(struct i3c_master_controller *master,
				    struct i3c_device_info *info)
{
	struct i3c_ccc_getbcr *getbcr;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	getbcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getbcr));
	if (!getbcr)
		return -ENOMEM;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETBCR, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	info->bcr = getbcr->bcr;

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_getdcr_locked(struct i3c_master_controller *master,
				    struct i3c_device_info *info)
{
	struct i3c_ccc_getdcr *getdcr;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	getdcr = i3c_ccc_cmd_dest_init(&dest, info->dyn_addr, sizeof(*getdcr));
	if (!getdcr)
		return -ENOMEM;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETDCR, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	info->dcr = getdcr->dcr;

out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

static int i3c_master_retrieve_dev_info(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);
	enum i3c_addr_slot_status slot_status;
	int ret;

	if (!dev->info.dyn_addr)
		return -EINVAL;

	slot_status = i3c_bus_get_addr_slot_status(&master->bus,
						   dev->info.dyn_addr);
	if (slot_status == I3C_ADDR_SLOT_RSVD ||
	    slot_status == I3C_ADDR_SLOT_I2C_DEV)
		return -EINVAL;

	ret = i3c_master_getpid_locked(master, &dev->info);
	if (ret)
		return ret;

	ret = i3c_master_getbcr_locked(master, &dev->info);
	if (ret)
		return ret;

	ret = i3c_master_getdcr_locked(master, &dev->info);
	if (ret)
		return ret;

	if (dev->info.bcr & I3C_BCR_MAX_DATA_SPEED_LIM) {
		ret = i3c_master_getmxds_locked(master, &dev->info);
		if (ret)
			return ret;
	}

	if (dev->info.bcr & I3C_BCR_IBI_PAYLOAD)
		dev->info.max_ibi_len = 1;

	i3c_master_getmrl_locked(master, &dev->info);
	i3c_master_getmwl_locked(master, &dev->info);

	if (dev->info.bcr & I3C_BCR_HDR_CAP) {
		ret = i3c_master_gethdrcap_locked(master, &dev->info);
		if (ret && ret != -EOPNOTSUPP)
			return ret;
	}

	return 0;
}

static int i3c_master_getstatus_locked(struct i3c_master_controller *master,
				       u8 addr, u16 *status)
{
	struct i3c_ccc_getstatus *getstatus;
	struct i3c_ccc_cmd_dest dest;
	struct i3c_ccc_cmd cmd;
	int ret;

	getstatus = i3c_ccc_cmd_dest_init(&dest, addr, sizeof(*getstatus));
	if (!getstatus)
		return -ENOMEM;

	i3c_ccc_cmd_init(&cmd, true, I3C_CCC_GETSTATUS, &dest, 1);
	ret = i3c_master_send_ccc_cmd_locked(master, &cmd);
	if (ret)
		goto out;

	if (dest.payload.len != sizeof(*getstatus)) {
		ret = -EIO;
		goto out;
	}

	if (status)
		*status = be16_to_cpu(getstatus->status);
out:
	i3c_ccc_cmd_dest_cleanup(&dest);

	return ret;
}

/* Values are chosen to give the device plenty of opportunities to respond */
#define I3C_DEV_PROBE_INITIAL_DELAY_US	20
#define I3C_DEV_PROBE_DELAY_FACTOR	2
#define I3C_DEV_PROBE_CNT		5

static bool i3c_master_i3c_dev_present(struct i3c_master_controller *master, unsigned int addr)
{
	int delay = I3C_DEV_PROBE_INITIAL_DELAY_US;

	for (int i = 0; i < I3C_DEV_PROBE_CNT; i++) {
		if (i) {
			fsleep(delay);
			delay *= I3C_DEV_PROBE_DELAY_FACTOR;
		}
		if (!i3c_master_getstatus_locked(master, addr, NULL))
			return true;
	}

	return false;
}

static void i3c_master_put_i3c_addrs(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);

	if (dev->info.static_addr)
		i3c_bus_set_addr_slot_status(&master->bus,
					     dev->info.static_addr,
					     I3C_ADDR_SLOT_FREE);

	if (dev->info.dyn_addr)
		i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr,
					     I3C_ADDR_SLOT_FREE);

	if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
		i3c_bus_set_addr_slot_status(&master->bus, dev->boardinfo->init_dyn_addr,
					     I3C_ADDR_SLOT_FREE);
}

static int i3c_master_get_i3c_addrs(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);
	enum i3c_addr_slot_status status;

	if (!dev->info.static_addr && !dev->info.dyn_addr)
		return 0;

	if (dev->info.static_addr) {
		status = i3c_bus_get_addr_slot_status(&master->bus,
						      dev->info.static_addr);
		/* Since static address and assigned dynamic address can be
		 * equal, allow this case to pass.
		 */
		if (status != I3C_ADDR_SLOT_FREE &&
		    dev->info.static_addr != dev->boardinfo->init_dyn_addr)
			return -EBUSY;

		i3c_bus_set_addr_slot_status(&master->bus,
					     dev->info.static_addr,
					     I3C_ADDR_SLOT_I3C_DEV);
	}

	/*
	 * ->init_dyn_addr should have been reserved before that, so, if we're
	 * trying to apply a pre-reserved dynamic address, we should not try
	 * to reserve the address slot a second time.
	 */
	if (dev->info.dyn_addr &&
	    (!dev->boardinfo ||
	     dev->boardinfo->init_dyn_addr != dev->info.dyn_addr)) {
		status = i3c_bus_get_addr_slot_status(&master->bus,
						      dev->info.dyn_addr);
		if (status != I3C_ADDR_SLOT_FREE)
			goto err_release_static_addr;

		i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr,
					     I3C_ADDR_SLOT_I3C_DEV);
	}

	return 0;

err_release_static_addr:
	if (dev->info.static_addr)
		i3c_bus_set_addr_slot_status(&master->bus,
					     dev->info.static_addr,
					     I3C_ADDR_SLOT_FREE);

	return -EBUSY;
}

static int i3c_master_attach_i3c_dev(struct i3c_master_controller *master,
				     struct i3c_dev_desc *dev)
{
	int ret;

	/*
	 * We don't attach devices to the controller until they are
	 * addressable on the bus.
	 */
	if (!dev->info.static_addr && !dev->info.dyn_addr)
		return 0;

	ret = i3c_master_get_i3c_addrs(dev);
	if (ret)
		return ret;

	/* Do not attach the master device itself. */
	if (master->this != dev && master->ops->attach_i3c_dev) {
		ret = master->ops->attach_i3c_dev(dev);
		if (ret) {
			i3c_master_put_i3c_addrs(dev);
			return ret;
		}
	}

	list_add_tail(&dev->common.node, &master->bus.devs.i3c);

	return 0;
}

/**
 * i3c_master_reattach_i3c_dev_locked() - reattach an I3C device with a new address
 * @dev: I3C device descriptor to reattach
 * @old_dyn_addr: previous dynamic address of the device
 *
 * This function reattaches an existing I3C device to the bus when its dynamic
 * address has changed. It updates the bus address slot status accordingly:
 * - Marks the new dynamic address as occupied by an I3C device.
 * - Frees the old dynamic address slot if applicable.
 *
 * This function must be called with the bus lock held in write mode.
 *
 * Return: 0 on success, or a negative error code if reattachment fails
 *         (e.g. -EBUSY if the new address slot is not free).
 */
int i3c_master_reattach_i3c_dev_locked(struct i3c_dev_desc *dev,
				       u8 old_dyn_addr)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);
	int ret;

	if (dev->info.dyn_addr != old_dyn_addr) {
		i3c_bus_set_addr_slot_status(&master->bus,
					     dev->info.dyn_addr,
					     I3C_ADDR_SLOT_I3C_DEV);
		if (old_dyn_addr)
			i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr,
						     I3C_ADDR_SLOT_FREE);
	}

	if (master->ops->reattach_i3c_dev) {
		ret = master->ops->reattach_i3c_dev(dev, old_dyn_addr);
		if (ret) {
			i3c_master_put_i3c_addrs(dev);
			return ret;
		}
	}

	return 0;
}
EXPORT_SYMBOL_GPL(i3c_master_reattach_i3c_dev_locked);

static void i3c_master_detach_i3c_dev(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);

	/* Do not detach the master device itself. */
	if (master->this != dev && master->ops->detach_i3c_dev)
		master->ops->detach_i3c_dev(dev);

	i3c_master_put_i3c_addrs(dev);
	list_del(&dev->common.node);
}

static int i3c_master_attach_i2c_dev(struct i3c_master_controller *master,
				     struct i2c_dev_desc *dev)
{
	int ret;

	if (master->ops->attach_i2c_dev) {
		ret = master->ops->attach_i2c_dev(dev);
		if (ret)
			return ret;
	}

	list_add_tail(&dev->common.node, &master->bus.devs.i2c);

	return 0;
}

static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
{
	struct i3c_master_controller *master = i2c_dev_get_master(dev);

	list_del(&dev->common.node);

	if (master->ops->detach_i2c_dev)
		master->ops->detach_i2c_dev(dev);
}

static int i3c_master_early_i3c_dev_add(struct i3c_master_controller *master,
					  struct i3c_dev_boardinfo *boardinfo)
{
	struct i3c_device_info info = {
		.static_addr = boardinfo->static_addr,
		.pid = boardinfo->pid,
	};
	struct i3c_dev_desc *i3cdev;
	int ret;

	i3cdev = i3c_master_alloc_i3c_dev(master, &info);
	if (IS_ERR(i3cdev)) {
		ret = -ENOMEM;
		goto err_reserve_addr;
	}

	i3cdev->boardinfo = boardinfo;

	ret = i3c_master_attach_i3c_dev(master, i3cdev);
	if (ret)
		goto err_free_dev;

	/*
	 * For devices using SETAASA instead of ENTDAA, the address is statically
	 * assigned. Update the dynamic address to the provided static address.
	 * Reattach the I3C device after updating the dynamic address with the same
	 * static address. It is not mandatory for such devices to implement CCC
	 * commands like GETPID, GETDCR etc. Hence, we can return after reattaching.
	 */
	if (i3cdev->boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) {
		i3cdev->info.dyn_addr = i3cdev->boardinfo->static_addr;
		ret = i3c_master_reattach_i3c_dev_locked(i3cdev, 0);
		if (ret)
			goto err_detach_dev;

		return 0;
	}

	ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
					i3cdev->boardinfo->init_dyn_addr);
	if (ret)
		goto err_detach_dev;

	i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
	ret = i3c_master_reattach_i3c_dev_locked(i3cdev, 0);
	if (ret)
		goto err_rstdaa;

	ret = i3c_master_retrieve_dev_info(i3cdev);
	if (ret)
		goto err_rstdaa;

	return 0;

err_rstdaa:
	i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
err_detach_dev:
	i3c_master_detach_i3c_dev(i3cdev);
err_free_dev:
	i3c_master_free_i3c_dev(i3cdev);
err_reserve_addr:
	/*
	 * A target using SETAASA may still get the static address on the
	 * SETAASA broadcast even if attach fails here. Keep the address
	 * reserved so that it is not assigned to another device during DAA.
	 */
	if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA)
		i3c_bus_set_addr_slot_status(&master->bus,
					     boardinfo->static_addr,
					     I3C_ADDR_SLOT_RSVD);

	return ret;
}

static void
i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
{
	struct i3c_device *i3cdev, *tmp;
	struct i3c_dev_desc *desc;
	LIST_HEAD(i3c_unreg_devs);
	int ret;

	if (!master->init_done)
		return;

	i3c_bus_maintenance_lock(&master->bus);

	if (master->shutting_down) {
		i3c_bus_maintenance_unlock(&master->bus);
		return;
	}

	i3c_bus_for_each_i3cdev(&master->bus, desc) {
		if (desc->dev || !desc->info.dyn_addr || desc == master->this)
			continue;

		desc->dev = kzalloc_obj(*desc->dev);
		if (!desc->dev)
			continue;

		desc->dev->bus = &master->bus;
		desc->dev->desc = desc;
		desc->dev->dev.parent = &master->dev;
		desc->dev->dev.type = &i3c_device_type;
		desc->dev->dev.bus = &i3c_bus_type;
		desc->dev->dev.release = i3c_device_release;

		/*
		 * For devices without PID (e.g., SETAASA devices), use
		 * static address for naming instead.
		 */
		if (desc->info.pid)
			dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id,
				     desc->info.pid);
		else
			dev_set_name(&desc->dev->dev, "%d-%02x", master->bus.id,
				     desc->info.static_addr);

		if (desc->boardinfo)
			device_set_node(&desc->dev->dev, desc->boardinfo->fwnode);

		/* If the device has IBI capability, set as wakeup capable */
		if (master->ibi_wakeup && (desc->info.bcr & I3C_BCR_IBI_REQ_CAP))
			device_set_wakeup_capable(&desc->dev->dev, true);

		list_add_tail(&desc->dev->node, &i3c_unreg_devs);
	}

	i3c_bus_maintenance_unlock(&master->bus);

	list_for_each_entry_safe(i3cdev, tmp, &i3c_unreg_devs, node) {
		ret = device_register(&i3cdev->dev);
		if (ret)
			dev_err(&master->dev, "Failed to add I3C device (err = %d)\n", ret);
		else
			list_del_init(&i3cdev->node);
	}

	i3c_bus_maintenance_lock(&master->bus);

	list_for_each_entry_safe(i3cdev, tmp, &i3c_unreg_devs, node) {
		list_del(&i3cdev->node);
		desc = i3cdev->desc;
		i3cdev->desc = NULL;
		put_device(&i3cdev->dev);
		desc->dev = NULL;
	}

	i3c_bus_maintenance_unlock(&master->bus);
}

static void i3c_master_reg_work_fn(struct work_struct *work)
{
	struct i3c_master_controller *master = container_of(work, typeof(*master), reg_work);

	i3c_master_register_new_i3c_devs(master);
}

/**
 * i3c_master_has_wakeup_enabled_devs() - check if any device can wake the system
 * @master: I3C master controller
 *
 * Iterate over devices on the bus and return true if any device has
 * system wakeup enabled and IBI enabled.
 *
 * Whether a device is enabled for system wakeup is user space policy,
 * settable at any time through the device's power/wakeup sysfs attribute,
 * so the answer is only stable once user space is frozen.  Call this from
 * a system suspend callback.
 *
 * Return: true if any device may wake the system via IBI, false otherwise.
 */
bool i3c_master_has_wakeup_enabled_devs(struct i3c_master_controller *master)
{
	struct i3c_dev_desc *desc;
	bool wakeup = false;

	i3c_bus_normaluse_lock(&master->bus);
	i3c_bus_for_each_i3cdev(&master->bus, desc) {
		if (!desc->dev || desc == master->this || !device_may_wakeup(&desc->dev->dev))
			continue;
		guard(mutex)(&desc->ibi_lock);
		if (desc->ibi && desc->ibi->enabled) {
			wakeup = true;
			break;
		}
	}
	i3c_bus_normaluse_unlock(&master->bus);

	return wakeup;
}
EXPORT_SYMBOL_GPL(i3c_master_has_wakeup_enabled_devs);

/**
 * i3c_master_dma_map_single() - Map buffer for single DMA transfer
 * @dev: device object of a device doing DMA
 * @buf: destination/source buffer for DMA
 * @len: length of transfer
 * @force_bounce: true, force to use a bounce buffer,
 *                false, function will auto check is a bounce buffer required
 * @dir: DMA direction
 *
 * Map buffer for a DMA transfer and allocate a bounce buffer if required.
 *
 * Return: I3C DMA transfer descriptor or NULL in case of error.
 */
struct i3c_dma *i3c_master_dma_map_single(struct device *dev, void *buf,
	size_t len, bool force_bounce, enum dma_data_direction dir)
{
	void *bounce __free(kfree) = NULL;
	void *dma_buf = buf;

	struct i3c_dma *dma_xfer __free(kfree) = kzalloc_obj(*dma_xfer);
	if (!dma_xfer)
		return NULL;

	dma_xfer->dev = dev;
	dma_xfer->buf = buf;
	dma_xfer->dir = dir;
	dma_xfer->len = len;
	dma_xfer->map_len = len;

	if (is_vmalloc_addr(buf))
		force_bounce = true;

	if (force_bounce) {
		dma_xfer->map_len = ALIGN(len, cache_line_size());
		if (dir == DMA_FROM_DEVICE)
			bounce = kzalloc(dma_xfer->map_len, GFP_KERNEL);
		else
			bounce = kmemdup(buf, dma_xfer->map_len, GFP_KERNEL);
		if (!bounce)
			return NULL;
		dma_buf = bounce;
	}

	dma_xfer->addr = dma_map_single(dev, dma_buf, dma_xfer->map_len, dir);
	if (dma_mapping_error(dev, dma_xfer->addr))
		return NULL;

	dma_xfer->bounce_buf = no_free_ptr(bounce);
	return no_free_ptr(dma_xfer);
}
EXPORT_SYMBOL_GPL(i3c_master_dma_map_single);

/**
 * i3c_master_dma_unmap_single() - Unmap buffer after DMA
 * @dma_xfer: DMA transfer and mapping descriptor
 *
 * Unmap buffer and cleanup DMA transfer descriptor.
 */
void i3c_master_dma_unmap_single(struct i3c_dma *dma_xfer)
{
	dma_unmap_single(dma_xfer->dev, dma_xfer->addr,
			 dma_xfer->map_len, dma_xfer->dir);
	if (dma_xfer->bounce_buf) {
		if (dma_xfer->dir == DMA_FROM_DEVICE)
			memcpy(dma_xfer->buf, dma_xfer->bounce_buf,
			       dma_xfer->len);
		kfree(dma_xfer->bounce_buf);
	}
	kfree(dma_xfer);
}
EXPORT_SYMBOL_GPL(i3c_master_dma_unmap_single);

/**
 * i3c_master_set_info() - set master device information
 * @master: master used to send frames on the bus
 * @info: I3C device information
 *
 * Set master device info. This should be called from
 * &i3c_master_controller_ops->bus_init().
 *
 * Not all &i3c_device_info fields are meaningful for a master device.
 * Here is a list of fields that should be properly filled:
 *
 * - &i3c_device_info->dyn_addr
 * - &i3c_device_info->bcr
 * - &i3c_device_info->dcr
 * - &i3c_device_info->pid
 * - &i3c_device_info->hdr_cap if %I3C_BCR_HDR_CAP bit is set in
 *   &i3c_device_info->bcr
 *
 * This function must be called with the bus lock held in maintenance mode.
 *
 * Return: 0 if @info contains valid information (not every piece of
 * information can be checked, but we can at least make sure @info->dyn_addr
 * and @info->bcr are correct), -EINVAL otherwise.
 */
int i3c_master_set_info(struct i3c_master_controller *master,
			const struct i3c_device_info *info)
{
	struct i3c_dev_desc *i3cdev;
	int ret;

	if (!i3c_bus_dev_addr_is_avail(&master->bus, info->dyn_addr))
		return -EINVAL;

	if (I3C_BCR_DEVICE_ROLE(info->bcr) == I3C_BCR_I3C_MASTER &&
	    master->secondary)
		return -EINVAL;

	if (master->this)
		return -EINVAL;

	i3cdev = i3c_master_alloc_i3c_dev(master, info);
	if (IS_ERR(i3cdev))
		return PTR_ERR(i3cdev);

	master->this = i3cdev;
	master->bus.cur_master = master->this;

	ret = i3c_master_attach_i3c_dev(master, i3cdev);
	if (ret)
		goto err_free_dev;

	return 0;

err_free_dev:
	master->bus.cur_master = NULL;
	master->this = NULL;
	i3c_master_free_i3c_dev(i3cdev);

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_set_info);

static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
{
	struct i3c_dev_desc *i3cdev, *i3ctmp;
	struct i2c_dev_desc *i2cdev, *i2ctmp;

	list_for_each_entry_safe(i3cdev, i3ctmp, &master->bus.devs.i3c,
				 common.node) {
		i3c_master_detach_i3c_dev(i3cdev);

		if (i3cdev->boardinfo && i3cdev->boardinfo->init_dyn_addr)
			i3c_bus_set_addr_slot_status(&master->bus,
					i3cdev->boardinfo->init_dyn_addr,
					I3C_ADDR_SLOT_FREE);

		if (i3cdev != master->this)
			i3c_master_free_i3c_dev(i3cdev);
	}

	list_for_each_entry_safe(i2cdev, i2ctmp, &master->bus.devs.i2c,
				 common.node) {
		i3c_master_detach_i2c_dev(i2cdev);
		i3c_bus_set_addr_slot_status(&master->bus,
					     i2cdev->addr,
					     I3C_ADDR_SLOT_FREE);
		i3c_master_free_i2c_dev(i2cdev);
	}
}

/**
 * i3c_master_bus_init() - initialize an I3C bus
 * @master: main master initializing the bus
 *
 * This function is following all initialisation steps described in the I3C
 * specification:
 *
 * 1. Attach I2C devs to the master so that the master can fill its internal
 *    device table appropriately
 *
 * 2. Call &i3c_master_controller_ops->bus_init() method to initialize
 *    the master controller. That's usually where the bus mode is selected
 *    (pure bus or mixed fast/slow bus)
 *
 * 3. Instruct all devices on the bus to drop their dynamic address. This is
 *    particularly important when the bus was previously configured by someone
 *    else (for example the bootloader)
 *
 * 4. Disable all slave events.
 *
 * 5. Reserve address slots for I3C devices with init_dyn_addr. And if devices
 *    also have static_addr, try to pre-assign dynamic addresses requested by
 *    the FW with SETDASA and attach corresponding statically defined I3C
 *    devices to the master.
 *
 * 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
 *    remaining I3C devices
 *
 * Once this is done, all I3C and I2C devices should be usable.
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
static int i3c_master_bus_init(struct i3c_master_controller *master)
{
	enum i3c_addr_slot_status status;
	struct i2c_dev_boardinfo *i2cboardinfo;
	struct i3c_dev_boardinfo *i3cboardinfo;
	struct i2c_dev_desc *i2cdev;
	int ret;

	/*
	 * First attach all devices with static definitions provided by the
	 * FW.
	 */
	list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) {
		status = i3c_bus_get_addr_slot_status(&master->bus,
						      i2cboardinfo->base.addr);
		if (status != I3C_ADDR_SLOT_FREE) {
			ret = -EBUSY;
			goto err_detach_devs;
		}

		i3c_bus_set_addr_slot_status(&master->bus,
					     i2cboardinfo->base.addr,
					     I3C_ADDR_SLOT_I2C_DEV);

		i2cdev = i3c_master_alloc_i2c_dev(master,
						  i2cboardinfo->base.addr,
						  i2cboardinfo->lvr);
		if (IS_ERR(i2cdev)) {
			ret = PTR_ERR(i2cdev);
			goto err_detach_devs;
		}

		ret = i3c_master_attach_i2c_dev(master, i2cdev);
		if (ret) {
			i3c_master_free_i2c_dev(i2cdev);
			goto err_detach_devs;
		}
	}

	/*
	 * Now execute the controller specific ->bus_init() routine, which
	 * might configure its internal logic to match the bus limitations.
	 */
	ret = master->ops->bus_init(master);
	if (ret)
		goto err_detach_devs;

	/*
	 * The master device should have been instantiated in ->bus_init(),
	 * complain if this was not the case.
	 */
	if (!master->this) {
		dev_err(&master->dev,
			"master_set_info() was not called in ->bus_init()\n");
		ret = -EINVAL;
		goto err_bus_cleanup;
	}

	if (master->ops->set_speed) {
		ret = master->ops->set_speed(master, I3C_OPEN_DRAIN_SLOW_SPEED);
		if (ret)
			goto err_bus_cleanup;
	}

	/*
	 * Reset all dynamic address that may have been assigned before
	 * (assigned by the bootloader for example).
	 */
	ret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
	if (ret)
		goto err_bus_cleanup;

	if (master->ops->set_speed) {
		ret = master->ops->set_speed(master, I3C_OPEN_DRAIN_NORMAL_SPEED);
		if (ret)
			goto err_bus_cleanup;
	}

	/*
	 * Disable all slave events before starting DAA. When no active device
	 * is on the bus, returns Mx error code M2, this error is ignored.
	 */
	ret = i3c_master_enec_disec_locked(master, I3C_BROADCAST_ADDR, false,
					   I3C_CCC_EVENT_SIR | I3C_CCC_EVENT_MR |
					   I3C_CCC_EVENT_HJ, true);
	if (ret)
		goto err_bus_cleanup;

	/*
	 * Reserve init_dyn_addr first, and then try to pre-assign dynamic
	 * address and retrieve device information if needed.
	 * In case pre-assign dynamic address fails, setting dynamic address to
	 * the requested init_dyn_addr is retried after DAA is done in
	 * i3c_master_add_i3c_dev_locked().
	 */
	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {

		/*
		 * We don't reserve a dynamic address for devices that
		 * don't explicitly request one.
		 */
		if (!i3cboardinfo->init_dyn_addr)
			continue;

		ret = i3c_bus_get_addr_slot_status(&master->bus,
						   i3cboardinfo->init_dyn_addr);
		if (ret != I3C_ADDR_SLOT_FREE) {
			ret = -EBUSY;
			goto err_rstdaa;
		}

		/* Do not mark as occupied until real device exist in bus */
		i3c_bus_set_addr_slot_status_mask(&master->bus,
						  i3cboardinfo->init_dyn_addr,
						  I3C_ADDR_SLOT_EXT_DESIRED,
						  I3C_ADDR_SLOT_EXT_STATUS_MASK);

		/*
		 * Only try to create/attach devices that have a static
		 * address. Other devices will be created/attached when
		 * DAA happens, and the requested dynamic address will
		 * be set using SETNEWDA once those devices become
		 * addressable.
		 */

		if (i3cboardinfo->static_addr)
			i3c_master_early_i3c_dev_add(master, i3cboardinfo);
	}

	/*
	 * SETAASA is a broadcast CCC. Issue it after SETDASA so that devices
	 * configured for SETDASA (or supporting both methods) are assigned
	 * first, matching MIPI DISCO guidance to prefer SETDASA when both are
	 * available. Targets that already have a dynamic address ignore the
	 * later SETAASA broadcast.
	 */
	if (master->addr_method & I3C_ADDR_METHOD_SETAASA) {
		ret = i3c_master_setaasa_locked(master);
		if (ret)
			goto err_rstdaa;
	}

	ret = i3c_master_do_daa(master);
	if (ret)
		goto err_rstdaa;

	return 0;

err_rstdaa:
	i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);

err_bus_cleanup:
	if (master->ops->bus_cleanup)
		master->ops->bus_cleanup(master);

err_detach_devs:
	i3c_master_detach_free_devs(master);

	return ret;
}

static void i3c_master_bus_cleanup(struct i3c_master_controller *master)
{
	if (master->ops->bus_cleanup) {
		int ret = i3c_master_rpm_get(master);

		if (ret) {
			dev_err(&master->dev,
				"runtime resume error: master bus_cleanup() not done\n");
		} else {
			master->ops->bus_cleanup(master);
			i3c_master_rpm_put(master);
		}
	}

	i3c_master_detach_free_devs(master);
}

static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
{
	struct i3c_master_controller *master = i3cdev->common.master;
	struct i3c_dev_boardinfo *i3cboardinfo;

	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
		/*
		 * For devices without PID (e.g., SETAASA devices), match by
		 * static address. For devices with PID, match by PID.
		 */
		if (i3cboardinfo->pid) {
			if (i3cdev->info.pid != i3cboardinfo->pid)
				continue;
		} else {
			if (!i3cboardinfo->static_addr ||
			    i3cdev->info.static_addr != i3cboardinfo->static_addr)
				continue;
		}

		i3cdev->boardinfo = i3cboardinfo;
		i3cdev->info.static_addr = i3cboardinfo->static_addr;
		return;
	}
}

static struct i3c_dev_desc *
i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(refdev);
	struct i3c_dev_desc *i3cdev;

	if (!refdev->info.pid)
		return NULL;

	i3c_bus_for_each_i3cdev(&master->bus, i3cdev) {
		if (i3cdev != refdev && i3cdev->info.pid &&
		    i3cdev->info.pid == refdev->info.pid &&
		    i3cdev != master->this)
			return i3cdev;
	}

	return NULL;
}

/**
 * __i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
 * @master: master used to send frames on the bus
 * @addr: I3C slave dynamic address assigned to the device
 * @probe: probe to see if the device is really present at @addr
 *
 * This function instantiates an I3C device object and adds it to the I3C device
 * list. All device information is retrieved using standard CCC commands.
 *
 * This function must be called with the bus lock held in write mode.
 */
static void __i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
					    u8 addr, bool probe)
{
	struct i3c_device_info info = { .dyn_addr = addr };
	struct i3c_dev_desc *newdev, *olddev;
	u8 old_dyn_addr = addr, expected_dyn_addr;
	struct i3c_ibi_setup ibireq = { };
	bool enable_ibi = false;
	bool no_dev = false;
	int ret;

	newdev = i3c_master_alloc_i3c_dev(master, &info);
	if (IS_ERR(newdev)) {
		ret = PTR_ERR(newdev);
		goto err_prevent_addr_reuse;
	}

	ret = i3c_master_attach_i3c_dev(master, newdev);
	if (ret)
		goto err_free_dev;

	/*
	 * When a dynamic address is first assigned, there is no need to check
	 * whether it is still assigned, however, if adding the device fails,
	 * it will be attempted again later, at which point the address may
	 * have been lost (e.g. due to power management), so for that case,
	 * probe to see if the device is still present at the assigned address.
	 */
	if (probe && !i3c_master_i3c_dev_present(master, addr)) {
		no_dev = true;
		goto err_detach_dev;
	}

	ret = i3c_master_retrieve_dev_info(newdev);
	if (ret)
		goto err_detach_dev;

	i3c_master_attach_boardinfo(newdev);

	olddev = i3c_master_search_i3c_dev_duplicate(newdev);
	if (olddev) {
		newdev->dev = olddev->dev;
		if (newdev->dev)
			newdev->dev->desc = newdev;

		/*
		 * We need to restore the IBI state too, so let's save the
		 * IBI information and try to restore them after olddev has
		 * been detached+released and its IBI has been stopped and
		 * the associated resources have been freed.
		 */
		mutex_lock(&olddev->ibi_lock);
		if (olddev->ibi) {
			ibireq.handler = olddev->ibi->handler;
			ibireq.max_payload_len = olddev->ibi->max_payload_len;
			ibireq.num_slots = olddev->ibi->num_slots;

			if (olddev->ibi->enabled)
				enable_ibi = true;
			/*
			 * The olddev should not receive any commands on the
			 * i3c bus as it does not exist and has been assigned
			 * a new address. This will result in NACK or timeout.
			 * So, update the olddev->ibi->enabled flag to false
			 * to avoid DISEC with OldAddr.
			 */
			olddev->ibi->enabled = false;
			i3c_dev_free_ibi_locked(olddev);
		}
		mutex_unlock(&olddev->ibi_lock);

		old_dyn_addr = olddev->info.dyn_addr;

		i3c_master_detach_i3c_dev(olddev);
		i3c_master_free_i3c_dev(olddev);
	}

	/*
	 * Depending on our previous state, the expected dynamic address might
	 * differ:
	 * - if the device already had a dynamic address assigned, let's try to
	 *   re-apply this one
	 * - if the device did not have a dynamic address and the firmware
	 *   requested a specific address, pick this one
	 * - in any other case, keep the address automatically assigned by the
	 *   master
	 */
	if (old_dyn_addr && old_dyn_addr != newdev->info.dyn_addr)
		expected_dyn_addr = old_dyn_addr;
	else if (newdev->boardinfo && newdev->boardinfo->init_dyn_addr)
		expected_dyn_addr = newdev->boardinfo->init_dyn_addr;
	else
		expected_dyn_addr = newdev->info.dyn_addr;

	if (newdev->info.dyn_addr != expected_dyn_addr &&
	    i3c_bus_get_addr_slot_status(&master->bus, expected_dyn_addr) == I3C_ADDR_SLOT_FREE) {
		/*
		 * Try to apply the expected dynamic address. If it fails, keep
		 * the address assigned by the master.
		 */
		ret = i3c_master_setnewda_locked(master,
						 newdev->info.dyn_addr,
						 expected_dyn_addr);
		if (!ret) {
			old_dyn_addr = newdev->info.dyn_addr;
			newdev->info.dyn_addr = expected_dyn_addr;
			i3c_master_reattach_i3c_dev_locked(newdev, old_dyn_addr);
		} else {
			dev_err(&master->dev,
				"Failed to assign reserved/old address to device %d%llx",
				master->bus.id, newdev->info.pid);
		}
	}

	/*
	 * Now is time to try to restore the IBI setup. If we're lucky,
	 * everything works as before, otherwise, all we can do is complain.
	 * FIXME: maybe we should add callback to inform the driver that it
	 * should request the IBI again instead of trying to hide that from
	 * him.
	 */
	if (ibireq.handler) {
		mutex_lock(&newdev->ibi_lock);
		ret = i3c_dev_request_ibi_locked(newdev, &ibireq);
		if (ret) {
			dev_err(&master->dev,
				"Failed to request IBI on device %d-%llx",
				master->bus.id, newdev->info.pid);
		} else if (enable_ibi) {
			ret = i3c_dev_enable_ibi_locked(newdev);
			if (ret)
				dev_err(&master->dev,
					"Failed to re-enable IBI on device %d-%llx",
					master->bus.id, newdev->info.pid);
		}
		mutex_unlock(&newdev->ibi_lock);
	}

	return;

err_detach_dev:
	if (newdev->dev && newdev->dev->desc)
		newdev->dev->desc = NULL;

	i3c_master_detach_i3c_dev(newdev);

err_free_dev:
	i3c_master_free_i3c_dev(newdev);

err_prevent_addr_reuse:
	if (no_dev)
		return;
	/*
	 * Although the device has not been added, the address has been
	 * assigned. Prevent the address from being used again.
	 */
	if (i3c_bus_get_addr_slot_status(&master->bus, addr) == I3C_ADDR_SLOT_FREE)
		i3c_bus_set_addr_slot_status(&master->bus, addr, I3C_ADDR_SLOT_I3C_DEV);

	dev_err(&master->dev, "Failed to add I3C device at address %u, error %d\n", addr, ret);
}

/**
 * i3c_master_add_i3c_dev_locked() - add an I3C slave to the bus
 * @master: master used to send frames on the bus
 * @addr: I3C slave dynamic address assigned to the device
 *
 * This function instantiates an I3C device object and adds it to the
 * I3C device list. All device information is automatically retrieved using
 * standard CCC commands.
 *
 * This function must be called with the bus lock held in write mode.
 */
void i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master, u8 addr)
{
	__i3c_master_add_i3c_dev_locked(master, addr, false);
}
EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked);

static void i3c_master_reconcile_dyn_addrs(struct i3c_master_controller *master)
{
	DECLARE_BITMAP(dev_dyn_addrs, I2C_MAX_ADDR + 1);
	enum i3c_addr_slot_status status;
	struct i3c_dev_desc *desc;

	/* Mark all devices' dynamic and static addresses in the bitmap */
	bitmap_zero(dev_dyn_addrs, I2C_MAX_ADDR + 1);
	i3c_bus_for_each_i3cdev(&master->bus, desc) {
		if (desc->info.static_addr)
			__set_bit(desc->info.static_addr, dev_dyn_addrs);
		__set_bit(desc->info.dyn_addr, dev_dyn_addrs);
	}
	/* Reconcile the bitmap with the bus address slot status */
	for (unsigned int addr = 0; addr <= I2C_MAX_ADDR; addr++) {
		status = i3c_bus_get_addr_slot_status(&master->bus, addr);
		if (status != I3C_ADDR_SLOT_I3C_DEV || test_bit(addr, dev_dyn_addrs))
			continue;
		i3c_bus_set_addr_slot_status(&master->bus, addr, I3C_ADDR_SLOT_FREE);
		/* Try to add the device, but probe to see if it is really present */
		__i3c_master_add_i3c_dev_locked(master, addr, true);
	}
}

/**
 * i3c_master_do_daa_ext() - Dynamic Address Assignment (extended version)
 * @master: controller
 * @rstdaa: whether to first perform Reset of Dynamic Addresses (RSTDAA)
 *
 * Perform Dynamic Address Assignment with optional support for System
 * Hibernation (@rstdaa is true).
 *
 * After System Hibernation, Dynamic Addresses can have been reassigned at boot
 * time to different values. A simple strategy is followed to handle that.
 * Perform a Reset of Dynamic Addresses (RSTDAA) followed by the normal DAA
 * procedure which has provision for reassigning addresses that differ from the
 * previously recorded addresses.
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
int i3c_master_do_daa_ext(struct i3c_master_controller *master, bool rstdaa)
{
	int rstret = 0;
	int ret;

	ret = i3c_master_rpm_get(master);
	if (ret)
		return ret;

	i3c_bus_maintenance_lock(&master->bus);

	if (master->shutting_down) {
		ret = -ENODEV;
	} else {
		if (rstdaa)
			rstret = i3c_master_rstdaa_locked(master, I3C_BROADCAST_ADDR);
		ret = master->ops->do_daa(master);
		/*
		 * Handle cases where a dynamic address was assigned but the
		 * device was not successfully added.
		 */
		i3c_master_reconcile_dyn_addrs(master);
	}

	i3c_bus_maintenance_unlock(&master->bus);

	if (ret)
		goto out;

	queue_work(master->wq, &master->reg_work);
out:
	i3c_master_rpm_put(master);

	return rstret ?: ret;
}
EXPORT_SYMBOL_GPL(i3c_master_do_daa_ext);

/**
 * i3c_master_do_daa() - do a DAA (Dynamic Address Assignment)
 * @master: master doing the DAA
 *
 * This function instantiates I3C device objects and adds them to the
 * I3C device list. All device information is automatically retrieved using
 * standard CCC commands.
 *
 * Return: a 0 in case of success, an negative error code otherwise.
 */
int i3c_master_do_daa(struct i3c_master_controller *master)
{
	return i3c_master_do_daa_ext(master, false);
}
EXPORT_SYMBOL_GPL(i3c_master_do_daa);

#define OF_I3C_REG1_IS_I2C_DEV			BIT(31)

#ifdef CONFIG_ACPI
static int i3c_acpi_get_i2c_resource(struct acpi_resource *ares, void *data)
{
	struct i2c_dev_boardinfo *boardinfo = data;
	struct acpi_resource_i2c_serialbus *sb;

	if (boardinfo->base.addr || !i2c_acpi_get_i2c_resource(ares, &sb))
		return 1;

	boardinfo->base.addr = sb->slave_address;
	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
		boardinfo->base.flags |= I2C_CLIENT_TEN;

	boardinfo->lvr = sb->lvr;

	return 1;
}

static int i3c_acpi_add_i2c_boardinfo(struct i2c_dev_boardinfo *boardinfo,
				      struct fwnode_handle *fwnode)
{
	struct acpi_device *adev = to_acpi_device_node(fwnode);
	LIST_HEAD(resources);
	int ret;

	boardinfo->base.fwnode = acpi_fwnode_handle(adev);
	acpi_set_modalias(adev, dev_name(&adev->dev), boardinfo->base.type,
			  sizeof(boardinfo->base.type));

	ret = acpi_dev_get_resources(adev, &resources,
				     i3c_acpi_get_i2c_resource, boardinfo);
	if (ret < 0)
		return ret;

	acpi_dev_free_resource_list(&resources);

	if (!boardinfo->base.addr)
		return -ENODEV;

	return 0;
}
#else
static inline int i3c_acpi_add_i2c_boardinfo(struct i2c_dev_boardinfo *boardinfo,
					     struct fwnode_handle *fwnode)
{
	return -ENODEV;
}
#endif

static int
i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
			     struct fwnode_handle *fwnode, u32 *reg)
{
	struct i2c_dev_boardinfo *boardinfo;
	struct device *dev = &master->dev;
	int ret;

	boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL);
	if (!boardinfo)
		return -ENOMEM;

	if (is_of_node(fwnode)) {
		ret = of_i2c_get_board_info(dev, to_of_node(fwnode), &boardinfo->base);
		if (ret)
			return ret;

		/* LVR is encoded in reg[2] for Device Tree. */
		boardinfo->lvr = reg[2];
	} else if (is_acpi_device_node(fwnode)) {
		ret = i3c_acpi_add_i2c_boardinfo(boardinfo, fwnode);
		if (ret) {
			devm_kfree(dev, boardinfo);
			return ret;
		}
	} else {
		return -EINVAL;
	}

	/*
	 * The I3C Specification does not clearly say I2C devices with 10-bit
	 * address are supported. These devices can't be passed properly through
	 * DEFSLVS command.
	 */
	if (boardinfo->base.flags & I2C_CLIENT_TEN) {
		dev_err(dev, "I2C device with 10 bit address not supported.\n");
		return -EOPNOTSUPP;
	}

	list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
	fwnode_handle_get(fwnode);

	return 0;
}

static int
i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
			     struct fwnode_handle *fwnode, u32 *reg)
{
	struct i3c_dev_boardinfo *boardinfo;
	struct device *dev = &master->dev;
	enum i3c_addr_slot_status addrstatus;
	u32 init_dyn_addr = 0, static_addr_method = 0;

	boardinfo = devm_kzalloc(dev, sizeof(*boardinfo), GFP_KERNEL);
	if (!boardinfo)
		return -ENOMEM;

	if (reg[0]) {
		if (reg[0] > I3C_MAX_ADDR)
			return -EINVAL;

		addrstatus = i3c_bus_get_addr_slot_status(&master->bus,
							  reg[0]);
		if (addrstatus != I3C_ADDR_SLOT_FREE)
			return -EINVAL;
	}

	boardinfo->static_addr = reg[0];

	if (!fwnode_property_read_u32(fwnode, "mipi-i3c-static-method", &static_addr_method))
		boardinfo->static_addr_method = static_addr_method &
					(I3C_ADDR_METHOD_SETDASA | I3C_ADDR_METHOD_SETAASA);

	if (!fwnode_property_read_u32(fwnode, "assigned-address", &init_dyn_addr)) {
		/*
		 * When a device advertises both SETDASA and SETAASA, an explicit
		 * dynamic address selects SETDASA (MIPI DISCO prefers it); drop
		 * SETAASA so it is not used for this device.
		 */
		if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETDASA)
			boardinfo->static_addr_method &= ~I3C_ADDR_METHOD_SETAASA;

		if (init_dyn_addr > I3C_MAX_ADDR)
			return -EINVAL;

		addrstatus = i3c_bus_get_addr_slot_status(&master->bus,
							  init_dyn_addr);
		if (addrstatus != I3C_ADDR_SLOT_FREE)
			return -EINVAL;
	}

	if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) {
		/* For SETAASA, static address is taken as the dynamic address. */
		init_dyn_addr = boardinfo->static_addr;
	}

	/* Update the address methods required for device discovery */
	master->addr_method |= boardinfo->static_addr_method;

	boardinfo->pid = ((u64)reg[1] << 32) | reg[2];

	/* For SETAASA devices, validate the static address instead of PID */
	if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) {
		if (!boardinfo->static_addr)
			return -EINVAL;
	} else {
		if (!I3C_PID_MANUF_ID(boardinfo->pid) ||
		    (boardinfo->pid & GENMASK_ULL(63, 48)) ||
		    I3C_PID_RND_LOWER_32BITS(boardinfo->pid))
			return -EINVAL;
	}

	boardinfo->init_dyn_addr = init_dyn_addr;
	boardinfo->fwnode = fwnode_handle_get(fwnode);
	list_add_tail(&boardinfo->node, &master->boardinfo.i3c);

	return 0;
}

static int i3c_master_add_of_dev(struct i3c_master_controller *master,
				 struct fwnode_handle *fwnode)
{
	u32 reg[3];
	int ret;

	if (!master)
		return -EINVAL;

	ret = fwnode_property_read_u32_array(fwnode, "reg", reg, ARRAY_SIZE(reg));
	if (ret)
		return ret;

	/*
	 * I3C device should have either the manufacturer ID specified or the
	 * address discovery method specified. Else treat it as an I2C device.
	 */
	if (!reg[1] && !fwnode_property_present(fwnode, "mipi-i3c-static-method"))
		ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg);
	else
		ret = i3c_master_add_i3c_boardinfo(master, fwnode, reg);

	return ret;
}

#ifdef CONFIG_ACPI
static int i3c_master_add_acpi_dev(struct i3c_master_controller *master,
				   struct fwnode_handle *fwnode)
{
	struct acpi_device *adev = to_acpi_device_node(fwnode);
	acpi_bus_address adr;
	u32 reg[3] = { 0 };
	int ret;

	/*
	 * If the ACPI table entry has _ADR method, it's an I3C device.
	 * Otherwise it may be an I2C device described by an I2cSerialBus
	 * resource. If no I2cSerialBus resource is found, ignore the entry.
	 */
	if (!acpi_has_method(adev->handle, "_ADR")) {
		ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg);
		if (ret == -ENODEV)
			return 0;

		return ret;
	}

	adr = acpi_device_adr(adev);

	/* For I3C devices, _ADR will have the 48 bit PID of the device  */
	reg[1] = upper_32_bits(adr);
	reg[2] = lower_32_bits(adr);

	fwnode_property_read_u32(fwnode, "mipi-i3c-static-address", &reg[0]);

	return i3c_master_add_i3c_boardinfo(master, fwnode, reg);
}

static u8 i3c_acpi_i2c_get_lvr(struct i2c_client *client)
{
	struct acpi_device *adev = to_acpi_device_node(client->dev.fwnode);
	struct i2c_dev_boardinfo boardinfo = {};
	LIST_HEAD(resources);
	int ret;
	u8 lvr;

	lvr = I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;

	ret = acpi_dev_get_resources(adev, &resources,
				     i3c_acpi_get_i2c_resource, &boardinfo);
	if (ret < 0)
		return lvr;

	if (boardinfo.base.addr)
		lvr = boardinfo.lvr;

	acpi_dev_free_resource_list(&resources);

	return lvr;
}
#else
static inline int i3c_master_add_acpi_dev(struct i3c_master_controller *master,
					  struct fwnode_handle *fwnode)
{
	return -ENODEV;
}

static inline u8 i3c_acpi_i2c_get_lvr(struct i2c_client *client)
{
	return I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;
}
#endif

static int fwnode_populate_i3c_bus(struct i3c_master_controller *master)
{
	struct device *dev = &master->dev;
	struct fwnode_handle *fwnode = dev_fwnode(dev);
	int ret;
	u32 val;

	if (!fwnode)
		return 0;

	fwnode_for_each_available_child_node_scoped(fwnode, child) {
		if (is_of_node(child))
			ret = i3c_master_add_of_dev(master, child);
		else if (is_acpi_device_node(child))
			ret = i3c_master_add_acpi_dev(master, child);
		else
			continue;

		if (ret)
			return ret;
	}

	/*
	 * The user might want to limit I2C and I3C speed in case some devices
	 * on the bus are not supporting typical rates, or if the bus topology
	 * prevents it from using max possible rate.
	 */
	if (!device_property_read_u32(dev, "i2c-scl-hz", &val))
		master->bus.scl_rate.i2c = val;

	if (!device_property_read_u32(dev, "i3c-scl-hz", &val))
		master->bus.scl_rate.i3c = val;

	return 0;
}

static int i3c_master_i2c_adapter_xfer(struct i2c_adapter *adap,
				       struct i2c_msg *xfers, int nxfers)
{
	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
	struct i2c_dev_desc *dev;
	int i, ret;
	u16 addr;

	if (!xfers || !master || nxfers <= 0)
		return -EINVAL;

	if (!master->ops->i2c_xfers)
		return -EOPNOTSUPP;

	/* Doing transfers to different devices is not supported. */
	addr = xfers[0].addr;
	for (i = 1; i < nxfers; i++) {
		if (addr != xfers[i].addr)
			return -EOPNOTSUPP;
	}

	ret = i3c_master_rpm_get(master);
	if (ret)
		return ret;

	i3c_bus_normaluse_lock(&master->bus);
	dev = i3c_master_find_i2c_dev_by_addr(master, addr);
	if (!dev)
		ret = -ENOENT;
	else
		ret = master->ops->i2c_xfers(dev, xfers, nxfers);
	i3c_bus_normaluse_unlock(&master->bus);

	i3c_master_rpm_put(master);

	return ret ? ret : nxfers;
}

static u32 i3c_master_i2c_funcs(struct i2c_adapter *adapter)
{
	return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C;
}

static u8 i3c_master_i2c_get_lvr(struct i2c_client *client)
{
	/* Fall back to no spike filters and FM bus mode. */
	u8 lvr = I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;
	u32 reg[3];

	if (is_of_node(client->dev.fwnode)) {
		if (!fwnode_property_read_u32_array(client->dev.fwnode, "reg",
						    reg, ARRAY_SIZE(reg)))
			lvr = reg[2];
	} else if (is_acpi_device_node(client->dev.fwnode)) {
		lvr = i3c_acpi_i2c_get_lvr(client);
	}

	return lvr;
}

static int i3c_master_i2c_attach(struct i2c_adapter *adap, struct i2c_client *client)
{
	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
	enum i3c_addr_slot_status status;
	struct i2c_dev_desc *i2cdev;
	int ret;

	/* Already added by board info? */
	if (i3c_master_find_i2c_dev_by_addr(master, client->addr))
		return 0;

	status = i3c_bus_get_addr_slot_status(&master->bus, client->addr);
	if (status != I3C_ADDR_SLOT_FREE)
		return -EBUSY;

	i3c_bus_set_addr_slot_status(&master->bus, client->addr,
				     I3C_ADDR_SLOT_I2C_DEV);

	i2cdev = i3c_master_alloc_i2c_dev(master, client->addr,
					  i3c_master_i2c_get_lvr(client));
	if (IS_ERR(i2cdev)) {
		ret = PTR_ERR(i2cdev);
		goto out_clear_status;
	}

	ret = i3c_master_attach_i2c_dev(master, i2cdev);
	if (ret)
		goto out_free_dev;

	return 0;

out_free_dev:
	i3c_master_free_i2c_dev(i2cdev);
out_clear_status:
	i3c_bus_set_addr_slot_status(&master->bus, client->addr,
				     I3C_ADDR_SLOT_FREE);

	return ret;
}

static int i3c_master_i2c_detach(struct i2c_adapter *adap, struct i2c_client *client)
{
	struct i3c_master_controller *master = i2c_adapter_to_i3c_master(adap);
	struct i2c_dev_desc *dev;

	dev = i3c_master_find_i2c_dev_by_addr(master, client->addr);
	if (!dev)
		return -ENODEV;

	i3c_master_detach_i2c_dev(dev);
	i3c_bus_set_addr_slot_status(&master->bus, dev->addr,
				     I3C_ADDR_SLOT_FREE);
	i3c_master_free_i2c_dev(dev);

	return 0;
}

static const struct i2c_algorithm i3c_master_i2c_algo = {
	.master_xfer = i3c_master_i2c_adapter_xfer,
	.functionality = i3c_master_i2c_funcs,
};

static int i3c_i2c_notifier_call(struct notifier_block *nb, unsigned long action,
				 void *data)
{
	struct i2c_adapter *adap;
	struct i2c_client *client;
	struct device *dev = data;
	struct i3c_master_controller *master;
	int ret;

	if (dev->type != &i2c_client_type)
		return 0;

	client = to_i2c_client(dev);
	adap = client->adapter;

	if (adap->algo != &i3c_master_i2c_algo)
		return 0;

	master = i2c_adapter_to_i3c_master(adap);

	ret = i3c_master_rpm_get(master);
	if (ret)
		return ret;

	i3c_bus_maintenance_lock(&master->bus);
	switch (action) {
	case BUS_NOTIFY_ADD_DEVICE:
		ret = i3c_master_i2c_attach(adap, client);
		break;
	case BUS_NOTIFY_DEL_DEVICE:
		ret = i3c_master_i2c_detach(adap, client);
		break;
	default:
		ret = -EINVAL;
	}
	i3c_bus_maintenance_unlock(&master->bus);

	i3c_master_rpm_put(master);

	return ret;
}

static struct notifier_block i2cdev_notifier = {
	.notifier_call = i3c_i2c_notifier_call,
};

static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
{
	struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
	struct i2c_dev_desc *i2cdev;
	struct i2c_dev_boardinfo *i2cboardinfo;
	struct fwnode_handle *fwnode = dev_fwnode(&master->dev);
	int ret, id = -1;

	adap->dev.parent = master->dev.parent;
	adap->owner = master->dev.parent->driver->owner;
	adap->algo = &i3c_master_i2c_algo;
	strscpy(adap->name, dev_name(master->dev.parent), sizeof(adap->name));
	adap->timeout = HZ;
	adap->retries = 3;

	if (fwnode && is_of_node(fwnode))
		id = of_alias_get_id(to_of_node(fwnode), "i2c");

	if (id >= 0) {
		adap->nr = id;
		ret = i2c_add_numbered_adapter(adap);
	} else {
		ret = i2c_add_adapter(adap);
	}
	if (ret)
		return ret;

	/*
	 * We silently ignore failures here. The bus should keep working
	 * correctly even if one or more i2c devices are not registered.
	 */
	list_for_each_entry(i2cboardinfo, &master->boardinfo.i2c, node) {
		i2cdev = i3c_master_find_i2c_dev_by_addr(master,
							 i2cboardinfo->base.addr);
		if (WARN_ON(!i2cdev))
			continue;
		i2cdev->dev = i2c_new_client_device(adap, &i2cboardinfo->base);
	}

	return 0;
}

static void i3c_master_i2c_adapter_cleanup(struct i3c_master_controller *master)
{
	struct i2c_dev_desc *i2cdev;

	i2c_del_adapter(&master->i2c);

	i3c_bus_for_each_i2cdev(&master->bus, i2cdev)
		i2cdev->dev = NULL;
}

static void i3c_master_unregister_i3c_devs(struct i3c_master_controller *master)
{
	struct i3c_dev_desc *i3cdev;

	i3c_bus_for_each_i3cdev(&master->bus, i3cdev) {
		if (!i3cdev->dev)
			continue;

		if (device_is_registered(&i3cdev->dev->dev)) {
			get_device(&i3cdev->dev->dev);
			device_unregister(&i3cdev->dev->dev);
		}
		i3cdev->dev->desc = NULL;
		put_device(&i3cdev->dev->dev);
		i3cdev->dev = NULL;
	}
}

/* Approximate time for IBI handler to run */
#define I3C_WAKEUP_PROCESSING_TIME_MS 100

/**
 * i3c_master_queue_ibi() - Queue an IBI
 * @dev: the device this IBI is coming from
 * @slot: the IBI slot used to store the payload
 *
 * Queue an IBI to the controller workqueue. The IBI handler attached to
 * the dev will be called from a workqueue context.
 */
void i3c_master_queue_ibi(struct i3c_dev_desc *dev, struct i3c_ibi_slot *slot)
{
	if (!dev->ibi || !slot)
		return;

	if (device_may_wakeup(&dev->dev->dev))
		pm_wakeup_event(&dev->dev->dev, I3C_WAKEUP_PROCESSING_TIME_MS);

	atomic_inc(&dev->ibi->pending_ibis);
	queue_work(dev->ibi->wq, &slot->work);
}
EXPORT_SYMBOL_GPL(i3c_master_queue_ibi);

static void i3c_master_handle_ibi(struct work_struct *work)
{
	struct i3c_ibi_slot *slot = container_of(work, struct i3c_ibi_slot,
						 work);
	struct i3c_dev_desc *dev = slot->dev;
	struct i3c_master_controller *master = i3c_dev_get_master(dev);
	struct i3c_ibi_payload payload;

	payload.data = slot->data;
	payload.len = slot->len;

	if (dev->dev)
		dev->ibi->handler(dev->dev, &payload);

	master->ops->recycle_ibi_slot(dev, slot);
	if (atomic_dec_and_test(&dev->ibi->pending_ibis))
		complete(&dev->ibi->all_ibis_handled);
}

static void i3c_master_init_ibi_slot(struct i3c_dev_desc *dev,
				     struct i3c_ibi_slot *slot)
{
	slot->dev = dev;
	INIT_WORK(&slot->work, i3c_master_handle_ibi);
}

struct i3c_generic_ibi_slot {
	struct list_head node;
	struct i3c_ibi_slot base;
};

struct i3c_generic_ibi_pool {
	spinlock_t lock;
	unsigned int num_slots;
	void *payload_buf;
	struct list_head free_slots;
	struct list_head pending;
	struct i3c_generic_ibi_slot slots[] __counted_by(num_slots);
};

/**
 * i3c_generic_ibi_free_pool() - Free a generic IBI pool
 * @pool: the IBI pool to free
 *
 * Free all IBI slots allated by a generic IBI pool.
 */
void i3c_generic_ibi_free_pool(struct i3c_generic_ibi_pool *pool)
{
	struct i3c_generic_ibi_slot *slot;
	unsigned int nslots = 0;

	while (!list_empty(&pool->free_slots)) {
		slot = list_first_entry(&pool->free_slots,
					struct i3c_generic_ibi_slot, node);
		list_del(&slot->node);
		nslots++;
	}

	/*
	 * If the number of freed slots is not equal to the number of allocated
	 * slots we have a leak somewhere.
	 */
	WARN_ON(nslots != pool->num_slots);

	kfree(pool->payload_buf);
	kfree(pool);
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_free_pool);

/**
 * i3c_generic_ibi_alloc_pool() - Create a generic IBI pool
 * @dev: the device this pool will be used for
 * @req: IBI setup request describing what the device driver expects
 *
 * Create a generic IBI pool based on the information provided in @req.
 *
 * Return: a valid IBI pool in case of success, an ERR_PTR() otherwise.
 */
struct i3c_generic_ibi_pool *
i3c_generic_ibi_alloc_pool(struct i3c_dev_desc *dev,
			   const struct i3c_ibi_setup *req)
{
	struct i3c_generic_ibi_pool *pool;
	struct i3c_generic_ibi_slot *slot;
	unsigned int i;
	int ret;

	pool = kzalloc_flex(*pool, slots, req->num_slots);
	if (!pool)
		return ERR_PTR(-ENOMEM);

	pool->num_slots = req->num_slots;

	spin_lock_init(&pool->lock);
	INIT_LIST_HEAD(&pool->free_slots);
	INIT_LIST_HEAD(&pool->pending);

	if (req->max_payload_len) {
		pool->payload_buf = kcalloc(req->num_slots,
					    req->max_payload_len, GFP_KERNEL);
		if (!pool->payload_buf) {
			ret = -ENOMEM;
			goto err_free_pool;
		}
	}

	for (i = 0; i < req->num_slots; i++) {
		slot = &pool->slots[i];
		i3c_master_init_ibi_slot(dev, &slot->base);

		if (req->max_payload_len)
			slot->base.data = pool->payload_buf +
					  (i * req->max_payload_len);

		list_add_tail(&slot->node, &pool->free_slots);
	}

	return pool;

err_free_pool:
	i3c_generic_ibi_free_pool(pool);
	return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_alloc_pool);

/**
 * i3c_generic_ibi_get_free_slot() - Get a free slot from a generic IBI pool
 * @pool: the pool to query an IBI slot on
 *
 * Search for a free slot in a generic IBI pool.
 * The slot should be returned to the pool using i3c_generic_ibi_recycle_slot()
 * when it's no longer needed.
 *
 * Return: a pointer to a free slot, or NULL if there's no free slot available.
 */
struct i3c_ibi_slot *
i3c_generic_ibi_get_free_slot(struct i3c_generic_ibi_pool *pool)
{
	struct i3c_generic_ibi_slot *slot;
	unsigned long flags;

	spin_lock_irqsave(&pool->lock, flags);
	slot = list_first_entry_or_null(&pool->free_slots,
					struct i3c_generic_ibi_slot, node);
	if (slot)
		list_del(&slot->node);
	spin_unlock_irqrestore(&pool->lock, flags);

	return slot ? &slot->base : NULL;
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_get_free_slot);

/**
 * i3c_generic_ibi_recycle_slot() - Return a slot to a generic IBI pool
 * @pool: the pool to return the IBI slot to
 * @s: IBI slot to recycle
 *
 * Add an IBI slot back to its generic IBI pool. Should be called from the
 * master driver struct_master_controller_ops->recycle_ibi() method.
 */
void i3c_generic_ibi_recycle_slot(struct i3c_generic_ibi_pool *pool,
				  struct i3c_ibi_slot *s)
{
	struct i3c_generic_ibi_slot *slot;
	unsigned long flags;

	if (!s)
		return;

	slot = container_of(s, struct i3c_generic_ibi_slot, base);
	spin_lock_irqsave(&pool->lock, flags);
	list_add_tail(&slot->node, &pool->free_slots);
	spin_unlock_irqrestore(&pool->lock, flags);
}
EXPORT_SYMBOL_GPL(i3c_generic_ibi_recycle_slot);

static int i3c_master_check_ops(const struct i3c_master_controller_ops *ops)
{
	if (!ops || !ops->bus_init || !ops->i3c_xfers ||
	    !ops->send_ccc_cmd || !ops->do_daa || !ops->i2c_xfers)
		return -EINVAL;

	if (ops->request_ibi &&
	    (!ops->enable_ibi || !ops->disable_ibi || !ops->free_ibi ||
	     !ops->recycle_ibi_slot))
		return -EINVAL;

	return 0;
}

/**
 * i3c_master_register() - register an I3C master
 * @master: master used to send frames on the bus
 * @parent: the parent device (the one that provides this I3C master
 *	    controller)
 * @ops: the master controller operations
 * @secondary: true if you are registering a secondary master. Will return
 *	       -EOPNOTSUPP if set to true since secondary masters are not yet
 *	       supported
 *
 * This function takes care of everything for you:
 *
 * - creates and initializes the I3C bus
 * - populates the bus with static I2C devs if @parent->of_node is not
 *   NULL
 * - registers all I3C devices added by the controller during bus
 *   initialization
 * - registers the I2C adapter and all I2C devices
 *
 * Return: 0 in case of success, a negative error code otherwise.
 */
int i3c_master_register(struct i3c_master_controller *master,
			struct device *parent,
			const struct i3c_master_controller_ops *ops,
			bool secondary)
{
	unsigned long i2c_scl_rate = I3C_BUS_I2C_FM_PLUS_SCL_MAX_RATE;
	struct i3c_bus *i3cbus = i3c_master_get_bus(master);
	enum i3c_bus_mode mode = I3C_BUS_MODE_PURE;
	struct i2c_dev_boardinfo *i2cbi;
	int ret;

	/* We do not support secondary masters yet. */
	if (secondary)
		return -EOPNOTSUPP;

	ret = i3c_master_check_ops(ops);
	if (ret)
		return ret;

	master->dev.parent = parent;
	device_set_node(&master->dev, fwnode_handle_get(dev_fwnode(parent)));
	master->dev.bus = &i3c_bus_type;
	master->dev.type = &i3c_masterdev_type;
	master->dev.release = i3c_masterdev_release;
	master->ops = ops;
	master->secondary = secondary;
	master->addr_method = I3C_ADDR_METHOD_SETDASA;
	INIT_LIST_HEAD(&master->boardinfo.i2c);
	INIT_LIST_HEAD(&master->boardinfo.i3c);

	ret = i3c_master_rpm_get(master);
	if (ret)
		return ret;

	device_initialize(&master->dev);

	master->dev.dma_mask = parent->dma_mask;
	master->dev.coherent_dma_mask = parent->coherent_dma_mask;
	master->dev.dma_parms = parent->dma_parms;

	ret = i3c_bus_init(i3cbus, dev_fwnode(&master->dev));
	if (ret)
		goto err_put_dev;

	dev_set_name(&master->dev, "i3c-%d", i3cbus->id);

	ret = fwnode_populate_i3c_bus(master);
	if (ret)
		goto err_put_dev;

	list_for_each_entry(i2cbi, &master->boardinfo.i2c, node) {
		switch (i2cbi->lvr & I3C_LVR_I2C_INDEX_MASK) {
		case I3C_LVR_I2C_INDEX(0):
			if (mode < I3C_BUS_MODE_MIXED_FAST)
				mode = I3C_BUS_MODE_MIXED_FAST;
			break;
		case I3C_LVR_I2C_INDEX(1):
			if (mode < I3C_BUS_MODE_MIXED_LIMITED)
				mode = I3C_BUS_MODE_MIXED_LIMITED;
			break;
		case I3C_LVR_I2C_INDEX(2):
			if (mode < I3C_BUS_MODE_MIXED_SLOW)
				mode = I3C_BUS_MODE_MIXED_SLOW;
			break;
		default:
			ret = -EINVAL;
			goto err_put_dev;
		}

		if (i2cbi->lvr & I3C_LVR_I2C_FM_MODE)
			i2c_scl_rate = I3C_BUS_I2C_FM_SCL_MAX_RATE;
	}

	ret = i3c_bus_set_mode(i3cbus, mode, i2c_scl_rate);
	if (ret)
		goto err_put_dev;

	master->wq = alloc_workqueue("%s", WQ_PERCPU | WQ_FREEZABLE, 0, dev_name(parent));
	if (!master->wq) {
		ret = -ENOMEM;
		goto err_put_dev;
	}
	INIT_WORK(&master->hj_work, i3c_master_hj_work_fn);
	INIT_WORK(&master->reg_work, i3c_master_reg_work_fn);

	ret = i3c_master_bus_init(master);
	if (ret)
		goto err_put_dev;

	ret = device_add(&master->dev);
	if (ret)
		goto err_cleanup_bus;

	/*
	 * Expose our I3C bus as an I2C adapter so that I2C devices are exposed
	 * through the I2C subsystem.
	 */
	ret = i3c_master_i2c_adapter_init(master);
	if (ret)
		goto err_del_dev;

	i3c_bus_notify(i3cbus, I3C_NOTIFY_BUS_ADD);

	pm_runtime_no_callbacks(&master->dev);
	pm_suspend_ignore_children(&master->dev, true);
	pm_runtime_enable(&master->dev);

	/*
	 * We're done initializing the bus and the controller, we can now
	 * register I3C devices discovered during the initial DAA. Device
	 * registration is done via reg_work because that keeps a single
	 * registration code path and ensures the worker is the only writer
	 * of desc->dev. Flush the work to preserve synchronous probe-time
	 * behavior.
	 */
	master->init_done = true;
	queue_work(master->wq, &master->reg_work);
	flush_work(&master->reg_work);

	if (master->ops->set_dev_nack_retry)
		device_create_file(&master->dev, &dev_attr_dev_nack_retry_count);

	i3c_master_rpm_put(master);

	return 0;

err_del_dev:
	device_del(&master->dev);

err_cleanup_bus:
	i3c_master_bus_cleanup(master);

err_put_dev:
	i3c_master_rpm_put(master);
	put_device(&master->dev);

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_master_register);

/**
 * i3c_master_unregister() - unregister an I3C master
 * @master: master used to send frames on the bus
 *
 * Basically undo everything done in i3c_master_register().
 */
void i3c_master_unregister(struct i3c_master_controller *master)
{
	i3c_bus_notify(&master->bus, I3C_NOTIFY_BUS_REMOVE);
	i3c_master_shutdown(master);

	if (master->ops->set_dev_nack_retry)
		device_remove_file(&master->dev, &dev_attr_dev_nack_retry_count);

	i3c_master_i2c_adapter_cleanup(master);
	i3c_master_unregister_i3c_devs(master);
	i3c_master_bus_cleanup(master);
	pm_runtime_disable(&master->dev);
	device_unregister(&master->dev);
}
EXPORT_SYMBOL_GPL(i3c_master_unregister);

int i3c_dev_setdasa_locked(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master;

	if (!dev)
		return -ENOENT;

	master = i3c_dev_get_master(dev);
	if (!master)
		return -EINVAL;

	if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
		!dev->boardinfo->static_addr)
		return -EINVAL;

	return i3c_master_setdasa_locked(master, dev->info.static_addr,
						dev->boardinfo->init_dyn_addr);
}

int i3c_dev_do_xfers_locked(struct i3c_dev_desc *dev, struct i3c_xfer *xfers,
			    int nxfers, enum i3c_xfer_mode mode)
{
	struct i3c_master_controller *master;

	if (!dev)
		return -ENOENT;

	master = i3c_dev_get_master(dev);
	if (!master || !xfers)
		return -EINVAL;

	if (mode != I3C_SDR && !(master->this->info.hdr_cap & BIT(mode)))
		return -EOPNOTSUPP;

	return master->ops->i3c_xfers(dev, xfers, nxfers, mode);
}

/**
 * i3c_dev_disable_ibi_locked() - Disable IBIs coming from a specific device
 * @dev: device on which IBIs should be disabled
 *
 * This function disable IBIs coming from a specific device and wait for
 * all pending IBIs to be processed.
 *
 * Context: Must be called with mutex_lock(&dev->desc->ibi_lock) held.
 * Return: 0 in case of success, a negative error core otherwise.
 */
int i3c_dev_disable_ibi_locked(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master;
	int ret;

	if (!dev->ibi)
		return -EINVAL;

	master = i3c_dev_get_master(dev);
	ret = master->ops->disable_ibi(dev);
	if (ret)
		return ret;

	reinit_completion(&dev->ibi->all_ibis_handled);
	if (atomic_read(&dev->ibi->pending_ibis))
		wait_for_completion(&dev->ibi->all_ibis_handled);

	dev->ibi->enabled = false;

	return 0;
}
EXPORT_SYMBOL_GPL(i3c_dev_disable_ibi_locked);

/**
 * i3c_dev_enable_ibi_locked() - Enable IBIs from a specific device (lock held)
 * @dev: device on which IBIs should be enabled
 *
 * This function enable IBIs coming from a specific device and wait for
 * all pending IBIs to be processed. This should be called on a device
 * where i3c_device_request_ibi() has succeeded.
 *
 * Note that IBIs from this device might be received before this function
 * returns to its caller.
 *
 * Context: Must be called with mutex_lock(&dev->desc->ibi_lock) held.
 * Return: 0 on success, or a negative error code on failure.
 */
int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);
	int ret;

	if (!dev->ibi)
		return -EINVAL;

	ret = master->ops->enable_ibi(dev);
	if (!ret)
		dev->ibi->enabled = true;

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_dev_enable_ibi_locked);

/**
 * i3c_dev_request_ibi_locked() - Request an IBI
 * @dev: device for which we should enable IBIs
 * @req: setup requested for this IBI
 *
 * This function is responsible for pre-allocating all resources needed to
 * process IBIs coming from @dev. When this function returns, the IBI is not
 * enabled until i3c_device_enable_ibi() is called.
 *
 * Context: Must be called with mutex_lock(&dev->desc->ibi_lock) held.
 * Return: 0 in case of success, a negative error core otherwise.
 */
int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev,
			       const struct i3c_ibi_setup *req)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);
	struct i3c_device_ibi_info *ibi;
	int ret;

	if (!master->ops->request_ibi)
		return -EOPNOTSUPP;

	if (dev->ibi)
		return -EBUSY;

	ibi = kzalloc_obj(*ibi);
	if (!ibi)
		return -ENOMEM;

	ibi->wq = alloc_ordered_workqueue(dev_name(i3cdev_to_dev(dev->dev)), WQ_MEM_RECLAIM);
	if (!ibi->wq) {
		kfree(ibi);
		return -ENOMEM;
	}

	atomic_set(&ibi->pending_ibis, 0);
	init_completion(&ibi->all_ibis_handled);
	ibi->handler = req->handler;
	ibi->max_payload_len = req->max_payload_len;
	ibi->num_slots = req->num_slots;

	dev->ibi = ibi;
	ret = master->ops->request_ibi(dev, req);
	if (ret) {
		kfree(ibi);
		dev->ibi = NULL;
	}

	return ret;
}
EXPORT_SYMBOL_GPL(i3c_dev_request_ibi_locked);

/**
 * i3c_dev_free_ibi_locked() - Free all resources needed for IBI handling
 * @dev: device on which you want to release IBI resources
 *
 * This function is responsible for de-allocating resources previously
 * allocated by i3c_device_request_ibi(). It should be called after disabling
 * IBIs with i3c_device_disable_ibi().
 *
 * Context: Must be called with mutex_lock(&dev->desc->ibi_lock) held.
 */
void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev)
{
	struct i3c_master_controller *master = i3c_dev_get_master(dev);

	if (!dev->ibi)
		return;

	if (dev->ibi->enabled) {
		int ret;

		dev_err(&master->dev, "Freeing IBI that is still enabled\n");
		ret = i3c_master_rpm_get(master);
		if (!ret) {
			ret = i3c_dev_disable_ibi_locked(dev);
			i3c_master_rpm_put(master);
		}
		if (ret)
			dev_err(&master->dev, "Failed to disable IBI before freeing\n");
	}

	master->ops->free_ibi(dev);

	if (dev->ibi->wq) {
		destroy_workqueue(dev->ibi->wq);
		dev->ibi->wq = NULL;
	}

	kfree(dev->ibi);
	dev->ibi = NULL;
}
EXPORT_SYMBOL_GPL(i3c_dev_free_ibi_locked);

static int __init i3c_init(void)
{
	int res;

	res = of_alias_get_highest_id("i3c");
	if (res >= 0) {
		mutex_lock(&i3c_core_lock);
		__i3c_first_dynamic_bus_num = res + 1;
		mutex_unlock(&i3c_core_lock);
	}

	res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
	if (res)
		return res;

	res = bus_register(&i3c_bus_type);
	if (res)
		goto out_unreg_notifier;

	return 0;

out_unreg_notifier:
	bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);

	return res;
}
subsys_initcall(i3c_init);

static void __exit i3c_exit(void)
{
	bus_unregister_notifier(&i2c_bus_type, &i2cdev_notifier);
	idr_destroy(&i3c_bus_idr);
	bus_unregister(&i3c_bus_type);
}
module_exit(i3c_exit);

MODULE_AUTHOR("Boris Brezillon <boris.brezillon@bootlin.com>");
MODULE_DESCRIPTION("I3C core");
MODULE_LICENSE("GPL v2");