Merge branches 'pm-opp', 'pm-qos', 'acpi-pm', 'pm-domains' and 'pm-tools'
* pm-opp:
PM / OPP: Correct Documentation about library location
opp: of: Support multiple suspend OPPs defined in DT
dt-bindings: opp: Support multiple opp-suspend properties
opp: core: add regulators enable and disable
opp: Don't decrement uninitialized list_kref
* pm-qos:
PM: QoS: Get rid of unused flags
* acpi-pm:
ACPI: PM: Print debug messages on device power state changes
* pm-domains:
PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
PM / Domains: Simplify genpd_lookup_dev()
PM / Domains: Align in-parameter names for some genpd functions
* pm-tools:
pm-graph: make setVal unbuffered again for python2 and python3
cpupower: update German translation
tools/power/cpupower: fix 64bit detection when cross-compiling
cpupower: Add missing newline at end of file
pm-graph v5.5
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 76b6c79..6859227 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -140,8 +140,8 @@
frequency for a short duration of time limited by the device's power, current
and thermal limits.
-- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
- the table should have this.
+- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
+ in the table have this, the OPP with highest opp-hz will be used.
- opp-supported-hw: This enables us to select only a subset of OPPs from the
larger OPP table, based on what version of the hardware we are running on. We
diff --git a/Documentation/power/opp.rst b/Documentation/power/opp.rst
index b3cf1de..209c761 100644
--- a/Documentation/power/opp.rst
+++ b/Documentation/power/opp.rst
@@ -46,7 +46,7 @@
----------------------------------------
OPP library provides a set of helper functions to organize and query the OPP
-information. The library is located in drivers/base/power/opp.c and the header
+information. The library is located in drivers/opp/ directory and the header
is located in include/linux/pm_opp.h. OPP library can be enabled by enabling
CONFIG_PM_OPP from power management menuconfig menu. OPP library depends on
CONFIG_PM as certain SoCs such as Texas Instrument's OMAP framework allows to
diff --git a/Documentation/power/pm_qos_interface.rst b/Documentation/power/pm_qos_interface.rst
index 69921f0..3097694 100644
--- a/Documentation/power/pm_qos_interface.rst
+++ b/Documentation/power/pm_qos_interface.rst
@@ -7,8 +7,7 @@
one of the parameters.
Two different PM QoS frameworks are available:
-1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput,
-memory_bandwidth.
+1. PM QoS classes for cpu_dma_latency
2. the per-device PM QoS framework provides the API to manage the per-device latency
constraints and PM QoS flags.
@@ -79,7 +78,7 @@
parameter requests in the following way:
To register the default pm_qos target for the specific parameter, the process
-must open one of /dev/[cpu_dma_latency, network_latency, network_throughput]
+must open /dev/cpu_dma_latency
As long as the device node is held open that process has a registered
request on the parameter.
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 3f89580..08bb9f2 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -166,6 +166,10 @@ int acpi_device_set_power(struct acpi_device *device, int state)
|| (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD))
return -EINVAL;
+ acpi_handle_debug(device->handle, "Power state change: %s -> %s\n",
+ acpi_power_state_string(device->power.state),
+ acpi_power_state_string(state));
+
/* Make sure this is a valid target state */
/* There is a special case for D0 addressed below. */
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index b063bc4..cc85e87 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -149,29 +149,24 @@ static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev,
return ret;
}
+static int genpd_runtime_suspend(struct device *dev);
+
/*
* Get the generic PM domain for a particular struct device.
* This validates the struct device pointer, the PM domain pointer,
* and checks that the PM domain pointer is a real generic PM domain.
* Any failure results in NULL being returned.
*/
-static struct generic_pm_domain *genpd_lookup_dev(struct device *dev)
+static struct generic_pm_domain *dev_to_genpd_safe(struct device *dev)
{
- struct generic_pm_domain *genpd = NULL, *gpd;
-
if (IS_ERR_OR_NULL(dev) || IS_ERR_OR_NULL(dev->pm_domain))
return NULL;
- mutex_lock(&gpd_list_lock);
- list_for_each_entry(gpd, &gpd_list, gpd_list_node) {
- if (&gpd->domain == dev->pm_domain) {
- genpd = gpd;
- break;
- }
- }
- mutex_unlock(&gpd_list_lock);
+ /* A genpd's always have its ->runtime_suspend() callback assigned. */
+ if (dev->pm_domain->ops.runtime_suspend == genpd_runtime_suspend)
+ return pd_to_genpd(dev->pm_domain);
- return genpd;
+ return NULL;
}
/*
@@ -385,8 +380,8 @@ int dev_pm_genpd_set_performance_state(struct device *dev, unsigned int state)
unsigned int prev;
int ret;
- genpd = dev_to_genpd(dev);
- if (IS_ERR(genpd))
+ genpd = dev_to_genpd_safe(dev);
+ if (!genpd)
return -ENODEV;
if (unlikely(!genpd->set_performance_state))
@@ -1610,7 +1605,7 @@ static int genpd_remove_device(struct generic_pm_domain *genpd,
*/
int pm_genpd_remove_device(struct device *dev)
{
- struct generic_pm_domain *genpd = genpd_lookup_dev(dev);
+ struct generic_pm_domain *genpd = dev_to_genpd_safe(dev);
if (!genpd)
return -EINVAL;
diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 0ee8c01..3b7ffd02 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -988,6 +988,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
BLOCKING_INIT_NOTIFIER_HEAD(&opp_table->head);
INIT_LIST_HEAD(&opp_table->opp_list);
kref_init(&opp_table->kref);
+ kref_init(&opp_table->list_kref);
/* Secure the device table modification */
list_add(&opp_table->node, &opp_tables);
@@ -1625,6 +1626,12 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
goto free_regulators;
}
+ ret = regulator_enable(reg);
+ if (ret < 0) {
+ regulator_put(reg);
+ goto free_regulators;
+ }
+
opp_table->regulators[i] = reg;
}
@@ -1638,8 +1645,10 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
return opp_table;
free_regulators:
- while (i != 0)
- regulator_put(opp_table->regulators[--i]);
+ while (i--) {
+ regulator_disable(opp_table->regulators[i]);
+ regulator_put(opp_table->regulators[i]);
+ }
kfree(opp_table->regulators);
opp_table->regulators = NULL;
@@ -1665,8 +1674,10 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
/* Make sure there are no concurrent readers while updating opp_table */
WARN_ON(!list_empty(&opp_table->opp_list));
- for (i = opp_table->regulator_count - 1; i >= 0; i--)
+ for (i = opp_table->regulator_count - 1; i >= 0; i--) {
+ regulator_disable(opp_table->regulators[i]);
regulator_put(opp_table->regulators[i]);
+ }
_free_set_opp_data(opp_table);
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index b313aca..1813f5a 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -617,9 +617,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
/* OPP to select on device suspend */
if (of_property_read_bool(np, "opp-suspend")) {
if (opp_table->suspend_opp) {
- dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
- __func__, opp_table->suspend_opp->rate,
- new_opp->rate);
+ /* Pick the OPP with higher rate as suspend OPP */
+ if (new_opp->rate > opp_table->suspend_opp->rate) {
+ opp_table->suspend_opp->suspend = false;
+ new_opp->suspend = true;
+ opp_table->suspend_opp = new_opp;
+ }
} else {
new_opp->suspend = true;
opp_table->suspend_opp = new_opp;
@@ -662,8 +665,6 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
return 0;
}
- kref_init(&opp_table->list_kref);
-
/* We have opp-table node now, iterate over it and add OPPs */
for_each_available_child_of_node(opp_table->np, np) {
opp = _opp_add_static_v2(opp_table, dev, np);
@@ -672,17 +673,15 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
ret);
of_node_put(np);
- goto put_list_kref;
+ return ret;
} else if (opp) {
count++;
}
}
/* There should be one of more OPP defined */
- if (WARN_ON(!count)) {
- ret = -ENOENT;
- goto put_list_kref;
- }
+ if (WARN_ON(!count))
+ return -ENOENT;
list_for_each_entry(opp, &opp_table->opp_list, node)
pstate_count += !!opp->pstate;
@@ -691,8 +690,7 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
if (pstate_count && pstate_count != count) {
dev_err(dev, "Not all nodes have performance state set (%d: %d)\n",
count, pstate_count);
- ret = -ENOENT;
- goto put_list_kref;
+ return -ENOENT;
}
if (pstate_count)
@@ -701,11 +699,6 @@ static int _of_add_opp_table_v2(struct device *dev, struct opp_table *opp_table)
opp_table->parsed_static_opps = true;
return 0;
-
-put_list_kref:
- _put_opp_list_kref(opp_table);
-
- return ret;
}
/* Initializes OPP tables based on old-deprecated bindings */
@@ -731,8 +724,6 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
return -EINVAL;
}
- kref_init(&opp_table->list_kref);
-
val = prop->value;
while (nr) {
unsigned long freq = be32_to_cpup(val++) * 1000;
@@ -742,7 +733,6 @@ static int _of_add_opp_table_v1(struct device *dev, struct opp_table *opp_table)
if (ret) {
dev_err(dev, "%s: Failed to add OPP %ld (%d)\n",
__func__, freq, ret);
- _put_opp_list_kref(opp_table);
return ret;
}
nr -= 2;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 91d9bf4..baf02ff 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -197,9 +197,9 @@ static inline struct generic_pm_domain_data *dev_gpd_data(struct device *dev)
int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev);
int pm_genpd_remove_device(struct device *dev);
int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
- struct generic_pm_domain *new_subdomain);
+ struct generic_pm_domain *subdomain);
int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
- struct generic_pm_domain *target);
+ struct generic_pm_domain *subdomain);
int pm_genpd_init(struct generic_pm_domain *genpd,
struct dev_power_governor *gov, bool is_off);
int pm_genpd_remove(struct generic_pm_domain *genpd);
@@ -226,12 +226,12 @@ static inline int pm_genpd_remove_device(struct device *dev)
return -ENOSYS;
}
static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
- struct generic_pm_domain *new_sd)
+ struct generic_pm_domain *subdomain)
{
return -ENOSYS;
}
static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
- struct generic_pm_domain *target)
+ struct generic_pm_domain *subdomain)
{
return -ENOSYS;
}
@@ -282,8 +282,8 @@ int of_genpd_add_provider_onecell(struct device_node *np,
struct genpd_onecell_data *data);
void of_genpd_del_provider(struct device_node *np);
int of_genpd_add_device(struct of_phandle_args *args, struct device *dev);
-int of_genpd_add_subdomain(struct of_phandle_args *parent,
- struct of_phandle_args *new_subdomain);
+int of_genpd_add_subdomain(struct of_phandle_args *parent_spec,
+ struct of_phandle_args *subdomain_spec);
struct generic_pm_domain *of_genpd_remove_last(struct device_node *np);
int of_genpd_parse_idle_states(struct device_node *dn,
struct genpd_power_state **states, int *n);
@@ -316,8 +316,8 @@ static inline int of_genpd_add_device(struct of_phandle_args *args,
return -ENODEV;
}
-static inline int of_genpd_add_subdomain(struct of_phandle_args *parent,
- struct of_phandle_args *new_subdomain)
+static inline int of_genpd_add_subdomain(struct of_phandle_args *parent_spec,
+ struct of_phandle_args *subdomain_spec)
{
return -ENODEV;
}
diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h
index 2aebbc5..222c3e0 100644
--- a/include/linux/pm_qos.h
+++ b/include/linux/pm_qos.h
@@ -13,9 +13,6 @@
enum {
PM_QOS_RESERVED = 0,
PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_NETWORK_LATENCY,
- PM_QOS_NETWORK_THROUGHPUT,
- PM_QOS_MEMORY_BANDWIDTH,
/* insert new class ID */
PM_QOS_NUM_CLASSES,
@@ -33,9 +30,6 @@ enum pm_qos_flags_status {
#define PM_QOS_LATENCY_ANY_NS ((s64)PM_QOS_LATENCY_ANY * NSEC_PER_USEC)
#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
-#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
-#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
-#define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE 0
#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE PM_QOS_LATENCY_ANY
#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT PM_QOS_LATENCY_ANY
#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS PM_QOS_LATENCY_ANY_NS
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index f7aece7..7457e23 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -379,9 +379,7 @@ DECLARE_EVENT_CLASS(pm_qos_request,
TP_printk("pm_qos_class=%s value=%d",
__print_symbolic(__entry->pm_qos_class,
- { PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" },
- { PM_QOS_NETWORK_LATENCY, "NETWORK_LATENCY" },
- { PM_QOS_NETWORK_THROUGHPUT, "NETWORK_THROUGHPUT" }),
+ { PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" }),
__entry->value)
);
@@ -426,9 +424,7 @@ TRACE_EVENT(pm_qos_update_request_timeout,
TP_printk("pm_qos_class=%s value=%d, timeout_us=%ld",
__print_symbolic(__entry->pm_qos_class,
- { PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" },
- { PM_QOS_NETWORK_LATENCY, "NETWORK_LATENCY" },
- { PM_QOS_NETWORK_THROUGHPUT, "NETWORK_THROUGHPUT" }),
+ { PM_QOS_CPU_DMA_LATENCY, "CPU_DMA_LATENCY" }),
__entry->value, __entry->timeout_us)
);
diff --git a/kernel/power/qos.c b/kernel/power/qos.c
index 33e3feb..9568a2f 100644
--- a/kernel/power/qos.c
+++ b/kernel/power/qos.c
@@ -78,57 +78,9 @@ static struct pm_qos_object cpu_dma_pm_qos = {
.name = "cpu_dma_latency",
};
-static BLOCKING_NOTIFIER_HEAD(network_lat_notifier);
-static struct pm_qos_constraints network_lat_constraints = {
- .list = PLIST_HEAD_INIT(network_lat_constraints.list),
- .target_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
- .default_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
- .no_constraint_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE,
- .type = PM_QOS_MIN,
- .notifiers = &network_lat_notifier,
-};
-static struct pm_qos_object network_lat_pm_qos = {
- .constraints = &network_lat_constraints,
- .name = "network_latency",
-};
-
-
-static BLOCKING_NOTIFIER_HEAD(network_throughput_notifier);
-static struct pm_qos_constraints network_tput_constraints = {
- .list = PLIST_HEAD_INIT(network_tput_constraints.list),
- .target_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
- .default_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
- .no_constraint_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE,
- .type = PM_QOS_MAX,
- .notifiers = &network_throughput_notifier,
-};
-static struct pm_qos_object network_throughput_pm_qos = {
- .constraints = &network_tput_constraints,
- .name = "network_throughput",
-};
-
-
-static BLOCKING_NOTIFIER_HEAD(memory_bandwidth_notifier);
-static struct pm_qos_constraints memory_bw_constraints = {
- .list = PLIST_HEAD_INIT(memory_bw_constraints.list),
- .target_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
- .default_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
- .no_constraint_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
- .type = PM_QOS_SUM,
- .notifiers = &memory_bandwidth_notifier,
-};
-static struct pm_qos_object memory_bandwidth_pm_qos = {
- .constraints = &memory_bw_constraints,
- .name = "memory_bandwidth",
-};
-
-
static struct pm_qos_object *pm_qos_array[] = {
&null_pm_qos,
&cpu_dma_pm_qos,
- &network_lat_pm_qos,
- &network_throughput_pm_qos,
- &memory_bandwidth_pm_qos,
};
static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
index 9063fca..c862249 100644
--- a/tools/power/cpupower/Makefile
+++ b/tools/power/cpupower/Makefile
@@ -18,7 +18,6 @@
$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
endif
-include ../../scripts/Makefile.arch
# --- CONFIGURATION BEGIN ---
@@ -69,11 +68,6 @@
sbindir ?= /usr/sbin
mandir ?= /usr/man
includedir ?= /usr/include
-ifeq ($(IS_64_BIT), 1)
-libdir ?= /usr/lib64
-else
-libdir ?= /usr/lib
-endif
localedir ?= /usr/share/locale
docdir ?= /usr/share/doc/packages/cpupower
confdir ?= /etc/
@@ -100,6 +94,14 @@
HOSTCC = gcc
MKDIR = mkdir
+# 64bit library detection
+include ../../scripts/Makefile.arch
+
+ifeq ($(IS_64_BIT), 1)
+libdir ?= /usr/lib64
+else
+libdir ?= /usr/lib
+endif
# Now we set up the build system
#
diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh
index 9061b4f..f5f8b3c 100644
--- a/tools/power/cpupower/bench/cpufreq-bench_plot.sh
+++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh
@@ -88,4 +88,4 @@
echo >> $dir/plot_script.gpl
gnuplot $dir/plot_script.gpl
-rm -r $dir
\ No newline at end of file
+rm -r $dir
diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh
index 4e9714b..785a367 100644
--- a/tools/power/cpupower/bench/cpufreq-bench_script.sh
+++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh
@@ -85,4 +85,4 @@
}
measure
-create_plots
\ No newline at end of file
+create_plots
diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po
index 70887bb..9780a44 100644
--- a/tools/power/cpupower/po/de.po
+++ b/tools/power/cpupower/po/de.po
@@ -8,66 +8,66 @@
"Project-Id-Version: cpufrequtils 006\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-03-08 17:03+0100\n"
-"PO-Revision-Date: 2009-08-08 17:18+0100\n"
-"Last-Translator: <linux@dominikbrodowski.net>\n"
+"PO-Revision-Date: 2019-06-02 15:23+0200\n"
+"Last-Translator: Benjamin Weis <benjamin.weis@gmx.com>\n"
"Language-Team: NONE\n"
"Language: \n"
"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#: utils/idle_monitor/nhm_idle.c:36
msgid "Processor Core C3"
-msgstr ""
+msgstr "Prozessorkern C3"
#: utils/idle_monitor/nhm_idle.c:43
msgid "Processor Core C6"
-msgstr ""
+msgstr "Prozessorkern C6"
#: utils/idle_monitor/nhm_idle.c:51
msgid "Processor Package C3"
-msgstr ""
+msgstr "Prozessorpaket C3"
#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
msgid "Processor Package C6"
-msgstr ""
+msgstr "Prozessorpaket C6"
#: utils/idle_monitor/snb_idle.c:33
msgid "Processor Core C7"
-msgstr ""
+msgstr "Prozessorkern C7"
#: utils/idle_monitor/snb_idle.c:40
msgid "Processor Package C2"
-msgstr ""
+msgstr "Prozessorpaket C2"
#: utils/idle_monitor/snb_idle.c:47
msgid "Processor Package C7"
-msgstr ""
+msgstr "Prozessorpaket C7"
#: utils/idle_monitor/amd_fam14h_idle.c:56
msgid "Package in sleep state (PC1 or deeper)"
-msgstr ""
+msgstr "Paket in Schlafzustand (PC1 oder tiefer)"
#: utils/idle_monitor/amd_fam14h_idle.c:63
msgid "Processor Package C1"
-msgstr ""
+msgstr "Prozessorpaket C1"
#: utils/idle_monitor/amd_fam14h_idle.c:77
msgid "North Bridge P1 boolean counter (returns 0 or 1)"
-msgstr ""
+msgstr "North Bridge P1 boolescher Zähler (gibt 0 oder 1 zurück)"
#: utils/idle_monitor/mperf_monitor.c:35
msgid "Processor Core not idle"
-msgstr ""
+msgstr "Prozessorkern ist nicht im Leerlauf"
#: utils/idle_monitor/mperf_monitor.c:42
msgid "Processor Core in an idle state"
-msgstr ""
+msgstr "Prozessorkern ist in einem Ruhezustand"
#: utils/idle_monitor/mperf_monitor.c:50
msgid "Average Frequency (including boost) in MHz"
-msgstr ""
+msgstr "Durchschnittliche Frequenz (einschließlich Boost) in MHz"
#: utils/idle_monitor/cpupower-monitor.c:66
#, c-format
@@ -75,6 +75,8 @@
"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c Befehl ...]\n"
#: utils/idle_monitor/cpupower-monitor.c:69
#, c-format
@@ -82,36 +84,40 @@
"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c Befehl ...]\n"
#: utils/idle_monitor/cpupower-monitor.c:71
#, c-format
msgid "\t -v: be more verbose\n"
-msgstr ""
+msgstr "\t -v: ausführlicher\n"
#: utils/idle_monitor/cpupower-monitor.c:73
#, c-format
msgid "\t -h: print this help\n"
-msgstr ""
+msgstr "\t -h: diese Hilfe ausgeben\n"
#: utils/idle_monitor/cpupower-monitor.c:74
#, c-format
msgid "\t -i: time interval to measure for in seconds (default 1)\n"
-msgstr ""
+msgstr "\t -i: Zeitintervall für die Messung in Sekunden (Standard 1)\n"
#: utils/idle_monitor/cpupower-monitor.c:75
#, c-format
msgid "\t -t: show CPU topology/hierarchy\n"
-msgstr ""
+msgstr "\t -t: CPU-Topologie/Hierarchie anzeigen\n"
#: utils/idle_monitor/cpupower-monitor.c:76
#, c-format
msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
msgstr ""
+"\t -l: verfügbare CPU-Schlafwächter auflisten (für Verwendung mit -m)\n"
#: utils/idle_monitor/cpupower-monitor.c:77
#, c-format
msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
msgstr ""
+"\t -m: spezifische CPU-Schlafwächter anzeigen (in gleicher Reihenfolge)\n"
#: utils/idle_monitor/cpupower-monitor.c:79
#, c-format
@@ -119,71 +125,73 @@
"only one of: -t, -l, -m are allowed\n"
"If none of them is passed,"
msgstr ""
+"nur einer von: -t, -l, -m ist erlaubt\n"
+"Wenn keiner von ihnen übergeben wird,"
#: utils/idle_monitor/cpupower-monitor.c:80
#, c-format
msgid " all supported monitors are shown\n"
-msgstr ""
+msgstr " werden alle unterstützten Wächter angezeigt\n"
#: utils/idle_monitor/cpupower-monitor.c:197
#, c-format
msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
-msgstr ""
+msgstr "Wächter %s, Zähler %s hat keine Zählfunktion. Implementierungsfehler\n"
#: utils/idle_monitor/cpupower-monitor.c:207
#, c-format
msgid " *is offline\n"
-msgstr ""
+msgstr " *ist offline\n"
#: utils/idle_monitor/cpupower-monitor.c:236
#, c-format
msgid "%s: max monitor name length (%d) exceeded\n"
-msgstr ""
+msgstr "%s: max. Wächternamenslänge (%d) überschritten\n"
#: utils/idle_monitor/cpupower-monitor.c:250
#, c-format
msgid "No matching monitor found in %s, try -l option\n"
-msgstr ""
+msgstr "Kein passender Wächter in %s gefunden, versuchen Sie die Option -l\n"
#: utils/idle_monitor/cpupower-monitor.c:266
#, c-format
msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
-msgstr ""
+msgstr "Wächter \"%s\" (%d Zustände) - Könnte nach %u s überlaufen\n"
#: utils/idle_monitor/cpupower-monitor.c:319
#, c-format
msgid "%s took %.5f seconds and exited with status %d\n"
-msgstr ""
+msgstr "%s hat %.5f Sekunden gedauert und hat sich mit Status %d beendet\n"
#: utils/idle_monitor/cpupower-monitor.c:406
#, c-format
msgid "Cannot read number of available processors\n"
-msgstr ""
+msgstr "Anzahl der verfügbaren Prozessoren kann nicht gelesen werden\n"
#: utils/idle_monitor/cpupower-monitor.c:417
#, c-format
msgid "Available monitor %s needs root access\n"
-msgstr ""
+msgstr "Verfügbarer Wächter %s benötigt root-Zugriff\n"
#: utils/idle_monitor/cpupower-monitor.c:428
#, c-format
msgid "No HW Cstate monitors found\n"
-msgstr ""
+msgstr "Keine HW C-Zustandswächter gefunden\n"
#: utils/cpupower.c:78
#, c-format
msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
-msgstr ""
+msgstr "cpupower [ -c cpulist ] Unterbefehl [ARGS]\n"
#: utils/cpupower.c:79
#, c-format
msgid "cpupower --version\n"
-msgstr ""
+msgstr "cpupower --version\n"
#: utils/cpupower.c:80
#, c-format
msgid "Supported subcommands are:\n"
-msgstr ""
+msgstr "Unterstützte Unterbefehle sind:\n"
#: utils/cpupower.c:83
#, c-format
@@ -191,11 +199,15 @@
"\n"
"Some subcommands can make use of the -c cpulist option.\n"
msgstr ""
+"\n"
+"Einige Unterbefehle können die Option -c cpulist verwenden.\n"
#: utils/cpupower.c:84
#, c-format
msgid "Look at the general cpupower manpage how to use it\n"
msgstr ""
+"Schauen Sie sich die allgemeine cpupower manpage an, um zu erfahren, wie man "
+"es benutzt\n"
#: utils/cpupower.c:85
#, c-format
@@ -217,30 +229,31 @@
#: utils/cpupower.c:114
#, c-format
msgid "Error parsing cpu list\n"
-msgstr ""
+msgstr "Fehler beim Parsen der CPU-Liste\n"
#: utils/cpupower.c:172
#, c-format
msgid "Subcommand %s needs root privileges\n"
-msgstr ""
+msgstr "Unterbefehl %s benötigt root-Rechte\n"
#: utils/cpufreq-info.c:31
#, c-format
msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
msgstr ""
-"Konnte nicht die Anzahl der CPUs herausfinden (%s : %s), nehme daher 1 an.\n"
+"Anzahl der CPUs konnte nicht herausgefinden werden (%s: %s), es wird daher 1 "
+"angenommen\n"
#: utils/cpufreq-info.c:63
#, c-format
msgid ""
" minimum CPU frequency - maximum CPU frequency - governor\n"
-msgstr ""
-" minimale CPU-Taktfreq. - maximale CPU-Taktfreq. - Regler \n"
+msgstr " minimale CPU-Frequenz - maximale CPU-Frequenz - Regler\n"
#: utils/cpufreq-info.c:151
#, c-format
msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
msgstr ""
+"Fehler beim Evaluieren der Boost-Fähigkeiten bei CPU %d -- sind Sie root?\n"
#. P state changes via MSR are identified via cpuid 80000007
#. on Intel and AMD, but we assume boost capable machines can do that
@@ -250,50 +263,50 @@
#: utils/cpufreq-info.c:161
#, c-format
msgid " boost state support: \n"
-msgstr ""
+msgstr " Boost-Zustand-Unterstützung: \n"
#: utils/cpufreq-info.c:163
#, c-format
msgid " Supported: %s\n"
-msgstr ""
+msgstr " Unterstützt: %s\n"
#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "yes"
-msgstr ""
+msgstr "ja"
#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "no"
-msgstr ""
+msgstr "nein"
#: utils/cpufreq-info.c:164
-#, fuzzy, c-format
+#, c-format
msgid " Active: %s\n"
-msgstr " Treiber: %s\n"
+msgstr " Aktiv: %s\n"
#: utils/cpufreq-info.c:177
#, c-format
msgid " Boost States: %d\n"
-msgstr ""
+msgstr " Boost-Zustände: %d\n"
#: utils/cpufreq-info.c:178
#, c-format
msgid " Total States: %d\n"
-msgstr ""
+msgstr " Gesamtzustände: %d\n"
#: utils/cpufreq-info.c:181
#, c-format
msgid " Pstate-Pb%d: %luMHz (boost state)\n"
-msgstr ""
+msgstr " Pstate-Pb%d: %luMHz (Boost-Zustand)\n"
#: utils/cpufreq-info.c:184
#, c-format
msgid " Pstate-P%d: %luMHz\n"
-msgstr ""
+msgstr " Pstate-P%d: %luMHz\n"
#: utils/cpufreq-info.c:211
#, c-format
msgid " no or unknown cpufreq driver is active on this CPU\n"
-msgstr " kein oder nicht bestimmbarer cpufreq-Treiber aktiv\n"
+msgstr " kein oder ein unbekannter cpufreq-Treiber ist auf dieser CPU aktiv\n"
#: utils/cpufreq-info.c:213
#, c-format
@@ -303,12 +316,12 @@
#: utils/cpufreq-info.c:219
#, c-format
msgid " CPUs which run at the same hardware frequency: "
-msgstr " Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: "
+msgstr " CPUs, die mit der gleichen Hardwarefrequenz laufen: "
#: utils/cpufreq-info.c:230
#, c-format
msgid " CPUs which need to have their frequency coordinated by software: "
-msgstr " Die Taktfrequenz folgender CPUs werden per Software koordiniert: "
+msgstr " CPUs, die ihre Frequenz mit Software koordinieren müssen: "
#: utils/cpufreq-info.c:241
#, c-format
@@ -318,22 +331,22 @@
#: utils/cpufreq-info.c:247
#, c-format
msgid " hardware limits: "
-msgstr " Hardwarebedingte Grenzen der Taktfrequenz: "
+msgstr " Hardwarebegrenzungen: "
#: utils/cpufreq-info.c:256
#, c-format
msgid " available frequency steps: "
-msgstr " mögliche Taktfrequenzen: "
+msgstr " verfügbare Frequenzschritte: "
#: utils/cpufreq-info.c:269
#, c-format
msgid " available cpufreq governors: "
-msgstr " mögliche Regler: "
+msgstr " verfügbare cpufreq-Regler: "
#: utils/cpufreq-info.c:280
#, c-format
msgid " current policy: frequency should be within "
-msgstr " momentane Taktik: die Frequenz soll innerhalb "
+msgstr " momentane Richtlinie: Frequenz sollte innerhalb "
#: utils/cpufreq-info.c:282
#, c-format
@@ -346,29 +359,28 @@
"The governor \"%s\" may decide which speed to use\n"
" within this range.\n"
msgstr ""
-" liegen. Der Regler \"%s\" kann frei entscheiden,\n"
-" welche Taktfrequenz innerhalb dieser Grenze verwendet "
-"wird.\n"
+" sein. Der Regler \"%s\" kann frei entscheiden,\n"
+" welche Geschwindigkeit er in diesem Bereich verwendet.\n"
#: utils/cpufreq-info.c:293
#, c-format
msgid " current CPU frequency is "
-msgstr " momentane Taktfrequenz ist "
+msgstr " momentane CPU-Frequenz ist "
#: utils/cpufreq-info.c:296
#, c-format
msgid " (asserted by call to hardware)"
-msgstr " (verifiziert durch Nachfrage bei der Hardware)"
+msgstr " (durch Aufruf der Hardware sichergestellt)"
#: utils/cpufreq-info.c:304
#, c-format
msgid " cpufreq stats: "
-msgstr " Statistik:"
+msgstr " cpufreq-Statistiken: "
#: utils/cpufreq-info.c:472
-#, fuzzy, c-format
+#, c-format
msgid "Usage: cpupower freqinfo [options]\n"
-msgstr "Aufruf: cpufreq-info [Optionen]\n"
+msgstr "Aufruf: cpupower freqinfo [Optionen]\n"
#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
@@ -377,11 +389,9 @@
msgstr "Optionen:\n"
#: utils/cpufreq-info.c:474
-#, fuzzy, c-format
+#, c-format
msgid " -e, --debug Prints out debug information [default]\n"
-msgstr ""
-" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n"
-" zum Aufspüren von Fehlern\n"
+msgstr " -e, --debug Gibt Debug-Informationen aus [Standard]\n"
#: utils/cpufreq-info.c:475
#, c-format
@@ -424,7 +434,7 @@
#: utils/cpufreq-info.c:482
#, c-format
msgid " -g, --governors Determines available cpufreq governors *\n"
-msgstr " -g, --governors Erzeugt eine Liste mit verfügbaren Reglern *\n"
+msgstr " -g, --governors Ermittelt verfügbare cpufreq-Regler *\n"
#: utils/cpufreq-info.c:483
#, c-format
@@ -449,8 +459,7 @@
#: utils/cpufreq-info.c:486
#, c-format
msgid " -s, --stats Shows cpufreq statistics if available\n"
-msgstr ""
-" -s, --stats Zeigt, sofern möglich, Statistiken über cpufreq an.\n"
+msgstr " -s, --stats Zeigt cpufreq-Statistiken an, falls vorhanden\n"
#: utils/cpufreq-info.c:487
#, c-format
@@ -464,13 +473,13 @@
#: utils/cpufreq-info.c:488
#, c-format
msgid " -b, --boost Checks for turbo or boost modes *\n"
-msgstr ""
+msgstr " -b, --boost Prüft auf Turbo- oder Boost-Modi *\n"
#: utils/cpufreq-info.c:489
#, c-format
msgid ""
-" -o, --proc Prints out information like provided by the /proc/"
-"cpufreq\n"
+" -o, --proc Prints out information like provided by the "
+"/proc/cpufreq\n"
" interface in 2.4. and early 2.6. kernels\n"
msgstr ""
" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu "
@@ -509,8 +518,8 @@
"For the arguments marked with *, omitting the -c or --cpu argument is\n"
"equivalent to setting it to zero\n"
msgstr ""
-"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
-"mittels -c oder --cpu etwas anderes angegeben wird\n"
+"Für die mit * markierten Argumente ist das Weglassen des Arguments\n"
+"-c oder --cpu gleichbedeutend mit der Einstellung auf Null\n"
#: utils/cpufreq-info.c:580
#, c-format
@@ -525,8 +534,8 @@
"You can't specify more than one --cpu parameter and/or\n"
"more than one output-specific argument\n"
msgstr ""
-"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
-"informationsspezifischen Parameter gleichzeitig angeben\n"
+"Sie können nicht mehr als einen Parameter --cpu und/oder\n"
+"mehr als ein ausgabespezifisches Argument angeben\n"
#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
@@ -538,17 +547,17 @@
#, c-format
msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
msgstr ""
-"Konnte nicht die CPU %d analysieren, da sie (scheinbar?) nicht existiert.\n"
+"CPU %d konnte nicht analysiert werden, da sie scheinbar nicht existiert\n"
#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
#, c-format
msgid "analyzing CPU %d:\n"
-msgstr "analysiere CPU %d:\n"
+msgstr "CPU %d wird analysiert:\n"
#: utils/cpufreq-set.c:25
-#, fuzzy, c-format
+#, c-format
msgid "Usage: cpupower frequency-set [options]\n"
-msgstr "Aufruf: cpufreq-set [Optionen]\n"
+msgstr "Aufruf: cpupower frequency-set [Optionen]\n"
#: utils/cpufreq-set.c:27
#, c-format
@@ -556,7 +565,7 @@
" -d FREQ, --min FREQ new minimum CPU frequency the governor may "
"select\n"
msgstr ""
-" -d FREQ, --min FREQ neue minimale Taktfrequenz, die der Regler\n"
+" -d FREQ, --min FREQ neue minimale CPU-Frequenz, die der Regler\n"
" auswählen darf\n"
#: utils/cpufreq-set.c:28
@@ -571,7 +580,7 @@
#: utils/cpufreq-set.c:29
#, c-format
msgid " -g GOV, --governor GOV new cpufreq governor\n"
-msgstr " -g GOV, --governors GOV wechsle zu Regler GOV\n"
+msgstr " -g GOV, --governors GOV neuer cpufreq-Regler\n"
#: utils/cpufreq-set.c:30
#, c-format
@@ -579,29 +588,29 @@
" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
" governor to be available and loaded\n"
msgstr ""
-" -f FREQ, --freq FREQ setze exakte Taktfrequenz. Benötigt den Regler\n"
-" 'userspace'.\n"
+" -f FREQ, --freq FREQ bestimmte Frequenz, die eingestellt werden soll.\n"
+" Erfordert einen verfügbaren und geladenen "
+"userspace-Regler\n"
#: utils/cpufreq-set.c:32
#, c-format
msgid " -r, --related Switches all hardware-related CPUs\n"
-msgstr ""
-" -r, --related Setze Werte für alle CPUs, deren Taktfrequenz\n"
-" hardwarebedingt identisch ist.\n"
+msgstr " -r, --related Schaltet alle hardwarebezogenen CPUs um\n"
#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
#, c-format
msgid " -h, --help Prints out this screen\n"
-msgstr " -h, --help Gibt diese Kurzübersicht aus\n"
+msgstr " -h, --help Gibt diesen Bildschirm aus\n"
#: utils/cpufreq-set.c:35
-#, fuzzy, c-format
+#, c-format
msgid ""
"Notes:\n"
"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
msgstr ""
-"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
-"mittels -c oder --cpu etwas anderes angegeben wird\n"
+"Hinweis:\n"
+"1. Das Weglassen des Arguments -c oder --cpu ist gleichbedeutend mit der "
+"Einstellung auf \"all\"\n"
#: utils/cpufreq-set.c:37
#, fuzzy, c-format
@@ -636,17 +645,21 @@
"frequency\n"
" or because the userspace governor isn't loaded?\n"
msgstr ""
-"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n"
-"- nicht ausreichende Rechte (Administrator)\n"
-"- der Regler ist nicht verfügbar bzw. nicht geladen\n"
-"- die angegebene Taktik ist inkorrekt\n"
-"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n"
-" kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n"
+"Fehler beim Festlegen neuer Werte. Häufige Fehler:\n"
+"- Verfügen Sie über die erforderlichen Administrationsrechte? (Superuser?)\n"
+"- Ist der von Ihnen gewünschte Regler verfügbar und mittels modprobe "
+"geladen?\n"
+"- Versuchen Sie eine ungültige Richtlinie festzulegen?\n"
+"- Versuchen Sie eine bestimmte Frequenz festzulegen, aber der "
+"userspace-Regler ist nicht verfügbar,\n"
+" z.B. wegen Hardware, die nicht auf eine bestimmte Frequenz eingestellt "
+"werden kann\n"
+" oder weil der userspace-Regler nicht geladen ist?\n"
#: utils/cpufreq-set.c:170
#, c-format
msgid "wrong, unknown or unhandled CPU?\n"
-msgstr "unbekannte oder nicht regelbare CPU\n"
+msgstr "falsche, unbekannte oder nicht regelbare CPU?\n"
#: utils/cpufreq-set.c:302
#, c-format
@@ -654,8 +667,8 @@
"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
"-g/--governor parameters\n"
msgstr ""
-"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, -u/--"
-"max\n"
+"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, "
+"-u/--max\n"
"oder -g/--governor kombiniert werden\n"
#: utils/cpufreq-set.c:308
@@ -664,18 +677,18 @@
"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
"-g/--governor must be passed\n"
msgstr ""
-"Es muss mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max oder\n"
-"-g/--governor angegeben werden.\n"
+"Mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max und\n"
+"-g/--governor muss übergeben werden\n"
#: utils/cpufreq-set.c:347
#, c-format
msgid "Setting cpu: %d\n"
-msgstr ""
+msgstr "CPU einstellen: %d\n"
#: utils/cpupower-set.c:22
#, c-format
msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
-msgstr ""
+msgstr "Aufruf: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
#: utils/cpupower-set.c:24
#, c-format
@@ -689,6 +702,8 @@
msgid ""
" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n"
msgstr ""
+" -m, --sched-mc [VAL] Legt die Mehrkern-Scheduler-Richtlinie des "
+"Kernels fest.\n"
#: utils/cpupower-set.c:27
#, c-format
@@ -700,37 +715,37 @@
#: utils/cpupower-set.c:80
#, c-format
msgid "--perf-bias param out of range [0-%d]\n"
-msgstr ""
+msgstr "--perf-bias-Parameter außerhalb des Bereichs [0-%d]\n"
#: utils/cpupower-set.c:91
#, c-format
msgid "--sched-mc param out of range [0-%d]\n"
-msgstr ""
+msgstr "Parameter --sched-mc außerhalb des Bereichs [0-%d]\n"
#: utils/cpupower-set.c:102
#, c-format
msgid "--sched-smt param out of range [0-%d]\n"
-msgstr ""
+msgstr "Parameter --sched-smt außerhalb des Bereichs [0-%d]\n"
#: utils/cpupower-set.c:121
#, c-format
msgid "Error setting sched-mc %s\n"
-msgstr ""
+msgstr "Fehler beim Einstellen von sched-mc %s\n"
#: utils/cpupower-set.c:127
#, c-format
msgid "Error setting sched-smt %s\n"
-msgstr ""
+msgstr "Fehler beim Einstellen von sched-smt %s\n"
#: utils/cpupower-set.c:146
#, c-format
msgid "Error setting perf-bias value on CPU %d\n"
-msgstr ""
+msgstr "Fehler beim Einstellen des perf-bias-Wertes auf der CPU %d\n"
#: utils/cpupower-info.c:21
#, c-format
msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
-msgstr ""
+msgstr "Aufruf: cpupower info [ -b ] [ -m ] [ -s ]\n"
#: utils/cpupower-info.c:23
#, c-format
@@ -740,9 +755,10 @@
msgstr ""
#: utils/cpupower-info.c:25
-#, fuzzy, c-format
+#, c-format
msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n"
-msgstr " -p, --policy Findet die momentane Taktik heraus *\n"
+msgstr ""
+" -m, --sched-mc Ruft die Mehrkern-Scheduler-Richtlinie des Kernels ab.\n"
#: utils/cpupower-info.c:26
#, c-format
@@ -756,17 +772,20 @@
"\n"
"Passing no option will show all info, by default only on core 0\n"
msgstr ""
+"\n"
+"Wenn Sie keine Option übergeben, werden alle Informationen angezeigt, "
+"standardmäßig nur auf Kern 0\n"
#: utils/cpupower-info.c:102
#, c-format
msgid "System's multi core scheduler setting: "
-msgstr ""
+msgstr "Mehrkern-Scheduler-Einstellung des Systems: "
#. if sysfs file is missing it's: errno == ENOENT
#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
#, c-format
msgid "not supported\n"
-msgstr ""
+msgstr "nicht unterstützt\n"
#: utils/cpupower-info.c:111
#, c-format
@@ -786,164 +805,161 @@
#: utils/cpupower-info.c:147
#, c-format
msgid "Could not read perf-bias value\n"
-msgstr ""
+msgstr "perf-bias-Wert konnte nicht gelesen werden\n"
#: utils/cpupower-info.c:150
#, c-format
msgid "perf-bias: %d\n"
-msgstr ""
+msgstr "perf-bias: %d\n"
#: utils/cpuidle-info.c:28
-#, fuzzy, c-format
+#, c-format
msgid "Analyzing CPU %d:\n"
-msgstr "analysiere CPU %d:\n"
+msgstr "CPU %d wird analysiert:\n"
#: utils/cpuidle-info.c:32
#, c-format
msgid "CPU %u: No idle states\n"
-msgstr ""
+msgstr "CPU %u: Keine Ruhezustände\n"
#: utils/cpuidle-info.c:36
#, c-format
msgid "CPU %u: Can't read idle state info\n"
-msgstr ""
+msgstr "CPU %u: Ruhezustands-Informationen können nicht gelesen werden\n"
#: utils/cpuidle-info.c:41
#, c-format
msgid "Could not determine max idle state %u\n"
-msgstr ""
+msgstr "Max. Ruhezustand %u konnte nicht bestimmt werden\n"
#: utils/cpuidle-info.c:46
#, c-format
msgid "Number of idle states: %d\n"
-msgstr ""
+msgstr "Anzahl der Ruhezustände: %d\n"
#: utils/cpuidle-info.c:48
-#, fuzzy, c-format
+#, c-format
msgid "Available idle states:"
-msgstr " mögliche Taktfrequenzen: "
+msgstr "Verfügbare Ruhezustände:"
#: utils/cpuidle-info.c:71
#, c-format
msgid "Flags/Description: %s\n"
-msgstr ""
+msgstr "Merker/Beschreibung: %s\n"
#: utils/cpuidle-info.c:74
#, c-format
msgid "Latency: %lu\n"
-msgstr ""
+msgstr "Latenz: %lu\n"
#: utils/cpuidle-info.c:76
#, c-format
msgid "Usage: %lu\n"
-msgstr ""
+msgstr "Aufruf: %lu\n"
#: utils/cpuidle-info.c:78
#, c-format
msgid "Duration: %llu\n"
-msgstr ""
+msgstr "Dauer: %llu\n"
#: utils/cpuidle-info.c:90
#, c-format
msgid "Could not determine cpuidle driver\n"
-msgstr ""
+msgstr "cpuidle-Treiber konnte nicht bestimmt werden\n"
#: utils/cpuidle-info.c:94
-#, fuzzy, c-format
+#, c-format
msgid "CPUidle driver: %s\n"
-msgstr " Treiber: %s\n"
+msgstr "CPUidle-Treiber: %s\n"
#: utils/cpuidle-info.c:99
#, c-format
msgid "Could not determine cpuidle governor\n"
-msgstr ""
+msgstr "cpuidle-Regler konnte nicht bestimmt werden\n"
#: utils/cpuidle-info.c:103
#, c-format
msgid "CPUidle governor: %s\n"
-msgstr ""
+msgstr "CPUidle-Regler: %s\n"
#: utils/cpuidle-info.c:122
#, c-format
msgid "CPU %u: Can't read C-state info\n"
-msgstr ""
+msgstr "CPU %u: C-Zustands-Informationen können nicht gelesen werden\n"
#. printf("Cstates: %d\n", cstates);
#: utils/cpuidle-info.c:127
#, c-format
msgid "active state: C0\n"
-msgstr ""
+msgstr "aktiver Zustand: C0\n"
#: utils/cpuidle-info.c:128
#, c-format
msgid "max_cstate: C%u\n"
-msgstr ""
+msgstr "max_cstate: C%u\n"
#: utils/cpuidle-info.c:129
-#, fuzzy, c-format
+#, c-format
msgid "maximum allowed latency: %lu usec\n"
-msgstr " Maximale Dauer eines Taktfrequenzwechsels: "
+msgstr "maximal erlaubte Latenz: %lu usec\n"
#: utils/cpuidle-info.c:130
#, c-format
msgid "states:\t\n"
-msgstr ""
+msgstr "Zustände:\t\n"
#: utils/cpuidle-info.c:132
#, c-format
msgid " C%d: type[C%d] "
-msgstr ""
+msgstr " C%d: Typ[C%d] "
#: utils/cpuidle-info.c:134
#, c-format
msgid "promotion[--] demotion[--] "
-msgstr ""
+msgstr "promotion[--] demotion[--] "
#: utils/cpuidle-info.c:135
#, c-format
msgid "latency[%03lu] "
-msgstr ""
+msgstr "Latenz[%03lu] "
#: utils/cpuidle-info.c:137
#, c-format
msgid "usage[%08lu] "
-msgstr ""
+msgstr "Aufruf[%08lu] "
#: utils/cpuidle-info.c:139
#, c-format
msgid "duration[%020Lu] \n"
-msgstr ""
+msgstr "Dauer[%020Lu] \n"
#: utils/cpuidle-info.c:147
-#, fuzzy, c-format
+#, c-format
msgid "Usage: cpupower idleinfo [options]\n"
-msgstr "Aufruf: cpufreq-info [Optionen]\n"
+msgstr "Aufruf: cpupower idleinfo [Optionen]\n"
#: utils/cpuidle-info.c:149
-#, fuzzy, c-format
+#, c-format
msgid " -s, --silent Only show general C-state information\n"
msgstr ""
-" -e, --debug Erzeugt detaillierte Informationen, hilfreich\n"
-" zum Aufspüren von Fehlern\n"
+" -s, --silent Nur allgemeine C-Zustands-Informationen anzeigen\n"
#: utils/cpuidle-info.c:150
-#, fuzzy, c-format
+#, c-format
msgid ""
-" -o, --proc Prints out information like provided by the /proc/"
-"acpi/processor/*/power\n"
+" -o, --proc Prints out information like provided by the "
+"/proc/acpi/processor/*/power\n"
" interface in older kernels\n"
msgstr ""
-" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu "
-"dem\n"
-" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
-" Kernel-Versionen\n"
+" -o, --proc Gibt Informationen so aus, wie sie von der "
+"Schnittstelle\n"
+" /proc/acpi/processor/*/power in älteren Kerneln "
+"bereitgestellt werden\n"
#: utils/cpuidle-info.c:209
-#, fuzzy, c-format
+#, c-format
msgid "You can't specify more than one output-specific argument\n"
-msgstr ""
-"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
-"informationsspezifischen Parameter gleichzeitig angeben\n"
+msgstr "Sie können nicht mehr als ein ausgabenspezifisches Argument angeben\n"
#~ msgid ""
#~ " -c CPU, --cpu CPU CPU number which information shall be determined "
@@ -956,6 +972,6 @@
#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be "
#~ "modified\n"
#~ msgstr ""
-#~ " -c CPU, --cpu CPU Nummer der CPU, deren Taktfrequenz-"
-#~ "Einstellung\n"
+#~ " -c CPU, --cpu CPU Nummer der CPU, deren "
+#~ "Taktfrequenz-Einstellung\n"
#~ " werden soll\n"
diff --git a/tools/power/pm-graph/README b/tools/power/pm-graph/README
index 58a5591..96259f6 100644
--- a/tools/power/pm-graph/README
+++ b/tools/power/pm-graph/README
@@ -1,7 +1,7 @@
p m - g r a p h
pm-graph: suspend/resume/boot timing analysis tools
- Version: 5.4
+ Version: 5.5
Author: Todd Brandt <todd.e.brandt@intel.com>
Home Page: https://01.org/pm-graph
@@ -18,6 +18,10 @@
- upstream version in git:
https://github.com/intel/pm-graph/
+ Requirements:
+ - runs with python2 or python3, choice is made by /usr/bin/python link
+ - python2 now requires python-configparser be installed
+
Table of Contents
- Overview
- Setup
diff --git a/tools/power/pm-graph/bootgraph.py b/tools/power/pm-graph/bootgraph.py
index 666bcbd..d3b99a1 100755
--- a/tools/power/pm-graph/bootgraph.py
+++ b/tools/power/pm-graph/bootgraph.py
@@ -1,9 +1,18 @@
-#!/usr/bin/python2
+#!/usr/bin/python
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing boot timing
# Copyright (c) 2013, Intel Corporation.
#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
# Authors:
# Todd Brandt <todd.e.brandt@linux.intel.com>
#
@@ -81,7 +90,7 @@
cmdline = 'initcall_debug log_buf_len=32M'
if self.useftrace:
if self.cpucount > 0:
- bs = min(self.memtotal / 2, 2*1024*1024) / self.cpucount
+ bs = min(self.memtotal // 2, 2*1024*1024) // self.cpucount
else:
bs = 131072
cmdline += ' trace_buf_size=%dK trace_clock=global '\
@@ -137,13 +146,13 @@
if arg in ['-h', '-v', '-cronjob', '-reboot', '-verbose']:
continue
elif arg in ['-o', '-dmesg', '-ftrace', '-func']:
- args.next()
+ next(args)
continue
elif arg == '-result':
- cmdline += ' %s "%s"' % (arg, os.path.abspath(args.next()))
+ cmdline += ' %s "%s"' % (arg, os.path.abspath(next(args)))
continue
elif arg == '-cgskip':
- file = self.configFile(args.next())
+ file = self.configFile(next(args))
cmdline += ' %s "%s"' % (arg, os.path.abspath(file))
continue
cmdline += ' '+arg
@@ -292,11 +301,11 @@
tp = aslib.TestProps()
devtemp = dict()
if(sysvals.dmesgfile):
- lf = open(sysvals.dmesgfile, 'r')
+ lf = open(sysvals.dmesgfile, 'rb')
else:
lf = Popen('dmesg', stdout=PIPE).stdout
for line in lf:
- line = line.replace('\r\n', '')
+ line = aslib.ascii(line).replace('\r\n', '')
# grab the stamp and sysinfo
if re.match(tp.stampfmt, line):
tp.stamp = line
@@ -649,7 +658,7 @@
statinfo += '\t"%s": [\n\t\t"%s",\n' % (n, devstats[n]['info'])
if 'fstat' in devstats[n]:
funcs = devstats[n]['fstat']
- for f in sorted(funcs, key=funcs.get, reverse=True):
+ for f in sorted(funcs, key=lambda k:(funcs[k], k), reverse=True):
if funcs[f][0] < 0.01 and len(funcs) > 10:
break
statinfo += '\t\t"%f|%s|%d",\n' % (funcs[f][0], f, funcs[f][1])
@@ -729,7 +738,7 @@
op.write('@reboot python %s\n' % sysvals.cronjobCmdString())
op.close()
res = call([cmd, cronfile])
- except Exception, e:
+ except Exception as e:
pprint('Exception: %s' % str(e))
shutil.move(backfile, cronfile)
res = -1
@@ -745,7 +754,7 @@
try:
call(sysvals.blexec, stderr=PIPE, stdout=PIPE,
env={'PATH': '.:/sbin:/usr/sbin:/usr/bin:/sbin:/bin'})
- except Exception, e:
+ except Exception as e:
pprint('Exception: %s\n' % str(e))
return
# extract the option and create a grub config without it
@@ -792,7 +801,7 @@
op.close()
res = call(sysvals.blexec)
os.remove(grubfile)
- except Exception, e:
+ except Exception as e:
pprint('Exception: %s' % str(e))
res = -1
# cleanup
@@ -866,6 +875,7 @@
'Other commands:\n'\
' -flistall Print all functions capable of being captured in ftrace\n'\
' -sysinfo Print out system info extracted from BIOS\n'\
+ ' -which exec Print an executable path, should function even without PATH\n'\
' [redo]\n'\
' -dmesg file Create HTML output using dmesg input (used with -ftrace)\n'\
' -ftrace file Create HTML output using ftrace input (used with -dmesg)\n'\
@@ -907,13 +917,13 @@
sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0)
elif(arg == '-cgfilter'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No callgraph functions supplied', True)
sysvals.setCallgraphFilter(val)
elif(arg == '-cgskip'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No file supplied', True)
if val.lower() in switchoff:
@@ -924,7 +934,7 @@
doError('%s does not exist' % cgskip)
elif(arg == '-bl'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No boot loader name supplied', True)
if val.lower() not in ['grub']:
@@ -937,7 +947,7 @@
sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000)
elif(arg == '-func'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No filter functions supplied', True)
sysvals.useftrace = True
@@ -946,7 +956,7 @@
sysvals.setGraphFilter(val)
elif(arg == '-ftrace'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No ftrace file supplied', True)
if(os.path.exists(val) == False):
@@ -959,7 +969,7 @@
sysvals.cgexp = True
elif(arg == '-dmesg'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No dmesg file supplied', True)
if(os.path.exists(val) == False):
@@ -968,13 +978,13 @@
sysvals.dmesgfile = val
elif(arg == '-o'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No subdirectory name supplied', True)
sysvals.testdir = sysvals.setOutputFolder(val)
elif(arg == '-result'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No result file supplied', True)
sysvals.result = val
@@ -986,6 +996,17 @@
# remaining options are only for cron job use
elif(arg == '-cronjob'):
sysvals.iscronjob = True
+ elif(arg == '-which'):
+ try:
+ val = next(args)
+ except:
+ doError('No executable supplied', True)
+ out = sysvals.getExec(val)
+ if not out:
+ print('%s not found' % val)
+ sys.exit(1)
+ print(out)
+ sys.exit(0)
else:
doError('Invalid argument: '+arg, True)
diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8
index 9648be6..43aee64 100644
--- a/tools/power/pm-graph/sleepgraph.8
+++ b/tools/power/pm-graph/sleepgraph.8
@@ -53,10 +53,10 @@
Add the dmesg and ftrace logs to the html output. They will be viewable by
clicking buttons in the timeline.
.TP
-\fB-turbostat\fR
-Use turbostat to execute the command in freeze mode (default: disabled). This
-will provide turbostat output in the log which will tell you which actual
-power modes were entered.
+\fB-noturbostat\fR
+By default, if turbostat is found and the requested mode is freeze, sleepgraph
+will execute the suspend via turbostat and collect data in the timeline log.
+This option disables the use of turbostat.
.TP
\fB-result \fIfile\fR
Export a results table to a text file for parsing.
diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py
index 4f46a7a..f7d1c1f 100755
--- a/tools/power/pm-graph/sleepgraph.py
+++ b/tools/power/pm-graph/sleepgraph.py
@@ -1,9 +1,18 @@
-#!/usr/bin/python2
+#!/usr/bin/python
# SPDX-License-Identifier: GPL-2.0-only
#
# Tool for analyzing suspend/resume timing
# Copyright (c) 2013, Intel Corporation.
#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
# Authors:
# Todd Brandt <todd.e.brandt@linux.intel.com>
#
@@ -48,9 +57,10 @@
import re
import platform
import signal
+import codecs
from datetime import datetime
import struct
-import ConfigParser
+import configparser
import gzip
from threading import Thread
from subprocess import call, Popen, PIPE
@@ -60,6 +70,9 @@
print(msg)
sys.stdout.flush()
+def ascii(text):
+ return text.decode('ascii', 'ignore')
+
# ----------------- CLASSES --------------------
# Class: SystemValues
@@ -68,7 +81,7 @@
# store system values and test parameters
class SystemValues:
title = 'SleepGraph'
- version = '5.4'
+ version = '5.5'
ansi = False
rs = 0
display = ''
@@ -78,7 +91,7 @@
testlog = True
dmesglog = True
ftracelog = False
- tstat = False
+ tstat = True
mindevlen = 0.0
mincglen = 0.0
cgphase = ''
@@ -147,6 +160,7 @@
devdump = False
mixedphaseheight = True
devprops = dict()
+ platinfo = []
predelay = 0
postdelay = 0
pmdebug = ''
@@ -323,13 +337,20 @@
sys.exit(1)
return False
def getExec(self, cmd):
- dirlist = ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
- '/usr/local/sbin', '/usr/local/bin']
- for path in dirlist:
+ try:
+ fp = Popen(['which', cmd], stdout=PIPE, stderr=PIPE).stdout
+ out = ascii(fp.read()).strip()
+ fp.close()
+ except:
+ out = ''
+ if out:
+ return out
+ for path in ['/sbin', '/bin', '/usr/sbin', '/usr/bin',
+ '/usr/local/sbin', '/usr/local/bin']:
cmdfull = os.path.join(path, cmd)
if os.path.exists(cmdfull):
return cmdfull
- return ''
+ return out
def setPrecision(self, num):
if num < 0 or num > 6:
return
@@ -455,7 +476,7 @@
fp = Popen('dmesg', stdout=PIPE).stdout
ktime = '0'
for line in fp:
- line = line.replace('\r\n', '')
+ line = ascii(line).replace('\r\n', '')
idx = line.find('[')
if idx > 1:
line = line[idx:]
@@ -469,7 +490,7 @@
# store all new dmesg lines since initdmesg was called
fp = Popen('dmesg', stdout=PIPE).stdout
for line in fp:
- line = line.replace('\r\n', '')
+ line = ascii(line).replace('\r\n', '')
idx = line.find('[')
if idx > 1:
line = line[idx:]
@@ -501,7 +522,7 @@
call('cat '+self.tpath+'available_filter_functions', shell=True)
return
master = self.listFromFile(self.tpath+'available_filter_functions')
- for i in self.tracefuncs:
+ for i in sorted(self.tracefuncs):
if 'func' in self.tracefuncs[i]:
i = self.tracefuncs[i]['func']
if i in master:
@@ -628,7 +649,7 @@
self.fsetVal(kprobeevents, 'kprobe_events')
if output:
check = self.fgetVal('kprobe_events')
- linesack = (len(check.split('\n')) - 1) / 2
+ linesack = (len(check.split('\n')) - 1) // 2
pprint(' kprobe functions enabled: %d/%d' % (linesack, linesout))
self.fsetVal('1', 'events/kprobes/enable')
def testKprobe(self, kname, kprobe):
@@ -646,19 +667,19 @@
if linesack < linesout:
return False
return True
- def setVal(self, val, file, mode='w'):
+ def setVal(self, val, file):
if not os.path.exists(file):
return False
try:
- fp = open(file, mode, 0)
- fp.write(val)
+ fp = open(file, 'wb', 0)
+ fp.write(val.encode())
fp.flush()
fp.close()
except:
return False
return True
- def fsetVal(self, val, path, mode='w'):
- return self.setVal(val, self.tpath+path, mode)
+ def fsetVal(self, val, path):
+ return self.setVal(val, self.tpath+path)
def getVal(self, file):
res = ''
if not os.path.exists(file):
@@ -719,7 +740,7 @@
tgtsize = min(self.memfree, bmax)
else:
tgtsize = 65536
- while not self.fsetVal('%d' % (tgtsize / cpus), 'buffer_size_kb'):
+ while not self.fsetVal('%d' % (tgtsize // cpus), 'buffer_size_kb'):
# if the size failed to set, lower it and keep trying
tgtsize -= 65536
if tgtsize < 65536:
@@ -863,14 +884,23 @@
isgz = self.gzip
if mode == 'r':
try:
- with gzip.open(filename, mode+'b') as fp:
+ with gzip.open(filename, mode+'t') as fp:
test = fp.read(64)
isgz = True
except:
isgz = False
if isgz:
- return gzip.open(filename, mode+'b')
+ return gzip.open(filename, mode+'t')
return open(filename, mode)
+ def b64unzip(self, data):
+ try:
+ out = codecs.decode(base64.b64decode(data), 'zlib').decode()
+ except:
+ out = data
+ return out
+ def b64zip(self, data):
+ out = base64.b64encode(codecs.encode(data.encode(), 'zlib')).decode()
+ return out
def mcelog(self, clear=False):
cmd = self.getExec('mcelog')
if not cmd:
@@ -878,12 +908,124 @@
if clear:
call(cmd+' > /dev/null 2>&1', shell=True)
return ''
- fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
- out = fp.read().strip()
- fp.close()
+ try:
+ fp = Popen([cmd], stdout=PIPE, stderr=PIPE).stdout
+ out = ascii(fp.read()).strip()
+ fp.close()
+ except:
+ return ''
if not out:
return ''
- return base64.b64encode(out.encode('zlib'))
+ return self.b64zip(out)
+ def platforminfo(self):
+ # add platform info on to a completed ftrace file
+ if not os.path.exists(self.ftracefile):
+ return False
+ footer = '#\n'
+
+ # add test command string line if need be
+ if self.suspendmode == 'command' and self.testcommand:
+ footer += '# platform-testcmd: %s\n' % (self.testcommand)
+
+ # get a list of target devices from the ftrace file
+ props = dict()
+ tp = TestProps()
+ tf = self.openlog(self.ftracefile, 'r')
+ for line in tf:
+ # determine the trace data type (required for further parsing)
+ m = re.match(tp.tracertypefmt, line)
+ if(m):
+ tp.setTracerType(m.group('t'))
+ continue
+ # parse only valid lines, if this is not one move on
+ m = re.match(tp.ftrace_line_fmt, line)
+ if(not m or 'device_pm_callback_start' not in line):
+ continue
+ m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg'));
+ if(not m):
+ continue
+ dev = m.group('d')
+ if dev not in props:
+ props[dev] = DevProps()
+ tf.close()
+
+ # now get the syspath for each target device
+ for dirname, dirnames, filenames in os.walk('/sys/devices'):
+ if(re.match('.*/power', dirname) and 'async' in filenames):
+ dev = dirname.split('/')[-2]
+ if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)):
+ props[dev].syspath = dirname[:-6]
+
+ # now fill in the properties for our target devices
+ for dev in sorted(props):
+ dirname = props[dev].syspath
+ if not dirname or not os.path.exists(dirname):
+ continue
+ with open(dirname+'/power/async') as fp:
+ text = fp.read()
+ props[dev].isasync = False
+ if 'enabled' in text:
+ props[dev].isasync = True
+ fields = os.listdir(dirname)
+ if 'product' in fields:
+ with open(dirname+'/product', 'rb') as fp:
+ props[dev].altname = ascii(fp.read())
+ elif 'name' in fields:
+ with open(dirname+'/name', 'rb') as fp:
+ props[dev].altname = ascii(fp.read())
+ elif 'model' in fields:
+ with open(dirname+'/model', 'rb') as fp:
+ props[dev].altname = ascii(fp.read())
+ elif 'description' in fields:
+ with open(dirname+'/description', 'rb') as fp:
+ props[dev].altname = ascii(fp.read())
+ elif 'id' in fields:
+ with open(dirname+'/id', 'rb') as fp:
+ props[dev].altname = ascii(fp.read())
+ elif 'idVendor' in fields and 'idProduct' in fields:
+ idv, idp = '', ''
+ with open(dirname+'/idVendor', 'rb') as fp:
+ idv = ascii(fp.read()).strip()
+ with open(dirname+'/idProduct', 'rb') as fp:
+ idp = ascii(fp.read()).strip()
+ props[dev].altname = '%s:%s' % (idv, idp)
+ if props[dev].altname:
+ out = props[dev].altname.strip().replace('\n', ' ')\
+ .replace(',', ' ').replace(';', ' ')
+ props[dev].altname = out
+
+ # add a devinfo line to the bottom of ftrace
+ out = ''
+ for dev in sorted(props):
+ out += props[dev].out(dev)
+ footer += '# platform-devinfo: %s\n' % self.b64zip(out)
+
+ # add a line for each of these commands with their outputs
+ cmds = [
+ ['pcidevices', 'lspci', '-tv'],
+ ['interrupts', 'cat', '/proc/interrupts'],
+ ['gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/gpe*'],
+ ]
+ for cargs in cmds:
+ name = cargs[0]
+ cmdline = ' '.join(cargs[1:])
+ cmdpath = self.getExec(cargs[1])
+ if not cmdpath:
+ continue
+ cmd = [cmdpath] + cargs[2:]
+ try:
+ fp = Popen(cmd, stdout=PIPE, stderr=PIPE).stdout
+ info = ascii(fp.read()).strip()
+ fp.close()
+ except:
+ continue
+ if not info:
+ continue
+ footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info))
+
+ with self.openlog(self.ftracefile, 'a') as fp:
+ fp.write(footer)
+ return True
def haveTurbostat(self):
if not self.tstat:
return False
@@ -891,31 +1033,40 @@
if not cmd:
return False
fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr
- out = fp.read().strip()
+ out = ascii(fp.read()).strip()
fp.close()
- return re.match('turbostat version [0-9\.]* .*', out)
+ if re.match('turbostat version [0-9\.]* .*', out):
+ sysvals.vprint(out)
+ return True
+ return False
def turbostat(self):
cmd = self.getExec('turbostat')
- if not cmd:
- return 'missing turbostat executable'
- text = []
+ rawout = keyline = valline = ''
fullcmd = '%s -q -S echo freeze > %s' % (cmd, self.powerfile)
fp = Popen(['sh', '-c', fullcmd], stdout=PIPE, stderr=PIPE).stderr
for line in fp:
- if re.match('[0-9.]* sec', line):
+ line = ascii(line)
+ rawout += line
+ if keyline and valline:
continue
- text.append(line.split())
+ if re.match('(?i)Avg_MHz.*', line):
+ keyline = line.strip().split()
+ elif keyline:
+ valline = line.strip().split()
fp.close()
- if len(text) < 2:
- return 'turbostat output format error'
+ if not keyline or not valline or len(keyline) != len(valline):
+ errmsg = 'unrecognized turbostat output:\n'+rawout.strip()
+ sysvals.vprint(errmsg)
+ if not sysvals.verbose:
+ pprint(errmsg)
+ return ''
+ if sysvals.verbose:
+ pprint(rawout.strip())
out = []
- for key in text[0]:
- values = []
- idx = text[0].index(key)
- for line in text[1:]:
- if len(line) > idx:
- values.append(line[idx])
- out.append('%s=%s' % (key, ','.join(values)))
+ for key in keyline:
+ idx = keyline.index(key)
+ val = valline[idx]
+ out.append('%s=%s' % (key, val))
return '|'.join(out)
def checkWifi(self):
out = dict()
@@ -924,7 +1075,7 @@
return out
fp = Popen(iwcmd, stdout=PIPE, stderr=PIPE).stdout
for line in fp:
- m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', line)
+ m = re.match('(?P<dev>\S*) .* ESSID:(?P<ess>\S*)', ascii(line))
if not m:
continue
out['device'] = m.group('dev')
@@ -935,7 +1086,7 @@
if 'device' in out:
fp = Popen([ifcmd, out['device']], stdout=PIPE, stderr=PIPE).stdout
for line in fp:
- m = re.match('.* inet (?P<ip>[0-9\.]*)', line)
+ m = re.match('.* inet (?P<ip>[0-9\.]*)', ascii(line))
if m:
out['ip'] = m.group('ip')
break
@@ -990,13 +1141,13 @@
def __init__(self):
self.syspath = ''
self.altname = ''
- self.async = True
+ self.isasync = True
self.xtraclass = ''
self.xtrainfo = ''
def out(self, dev):
- return '%s,%s,%d;' % (dev, self.altname, self.async)
+ return '%s,%s,%d;' % (dev, self.altname, self.isasync)
def debug(self, dev):
- pprint('%s:\n\taltname = %s\n\t async = %s' % (dev, self.altname, self.async))
+ pprint('%s:\n\taltname = %s\n\t async = %s' % (dev, self.altname, self.isasync))
def altName(self, dev):
if not self.altname or self.altname == dev:
return dev
@@ -1004,13 +1155,13 @@
def xtraClass(self):
if self.xtraclass:
return ' '+self.xtraclass
- if not self.async:
+ if not self.isasync:
return ' sync'
return ''
def xtraInfo(self):
if self.xtraclass:
return ' '+self.xtraclass
- if self.async:
+ if self.isasync:
return ' async_device'
return ' sync_device'
@@ -1108,7 +1259,7 @@
return sorted(self.dmesg, key=lambda k:self.dmesg[k]['order'])
def initDevicegroups(self):
# called when phases are all finished being added
- for phase in self.dmesg.keys():
+ for phase in sorted(self.dmesg.keys()):
if '*' in phase:
p = phase.split('*')
pnew = '%s%d' % (p[0], len(p))
@@ -1430,16 +1581,7 @@
return phase
def sortedDevices(self, phase):
list = self.dmesg[phase]['list']
- slist = []
- tmp = dict()
- for devname in list:
- dev = list[devname]
- if dev['length'] == 0:
- continue
- tmp[dev['start']] = devname
- for t in sorted(tmp):
- slist.append(tmp[t])
- return slist
+ return sorted(list, key=lambda k:list[k]['start'])
def fixupInitcalls(self, phase):
# if any calls never returned, clip them at system resume end
phaselist = self.dmesg[phase]['list']
@@ -1576,7 +1718,7 @@
maxname = '%d' % self.maxDeviceNameSize(phase)
fmt = '%3d) %'+maxname+'s - %f - %f'
c = 1
- for name in devlist:
+ for name in sorted(devlist):
s = devlist[name]['start']
e = devlist[name]['end']
sysvals.vprint(fmt % (c, name, s, e))
@@ -1588,7 +1730,7 @@
devlist = []
for phase in self.sortedPhases():
list = self.deviceChildren(devname, phase)
- for dev in list:
+ for dev in sorted(list):
if dev not in devlist:
devlist.append(dev)
return devlist
@@ -1628,16 +1770,16 @@
def rootDeviceList(self):
# list of devices graphed
real = []
- for phase in self.dmesg:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
- for dev in list:
+ for dev in sorted(list):
if list[dev]['pid'] >= 0 and dev not in real:
real.append(dev)
# list of top-most root devices
rootlist = []
- for phase in self.dmesg:
+ for phase in self.sortedPhases():
list = self.dmesg[phase]['list']
- for dev in list:
+ for dev in sorted(list):
pdev = list[dev]['par']
pid = list[dev]['pid']
if(pid < 0 or re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)):
@@ -1718,9 +1860,9 @@
def createProcessUsageEvents(self):
# get an array of process names
proclist = []
- for t in self.pstl:
+ for t in sorted(self.pstl):
pslist = self.pstl[t]
- for ps in pslist:
+ for ps in sorted(pslist):
if ps not in proclist:
proclist.append(ps)
# get a list of data points for suspend and resume
@@ -1765,7 +1907,7 @@
def debugPrint(self):
for p in self.sortedPhases():
list = self.dmesg[p]['list']
- for devname in list:
+ for devname in sorted(list):
dev = list[devname]
if 'ftrace' in dev:
dev['ftrace'].debugPrint(' [%s]' % devname)
@@ -2466,7 +2608,7 @@
# if there is 1 line per row, draw them the standard way
for t, p in standardphases:
for i in sorted(self.rowheight[t][p]):
- self.rowheight[t][p][i] = self.bodyH/len(self.rowlines[t][p])
+ self.rowheight[t][p][i] = float(self.bodyH)/len(self.rowlines[t][p])
def createZoomBox(self, mode='command', testcount=1):
# Create bounding box, add buttons
html_zoombox = '<center><button id="zoomin">ZOOM IN +</button><button id="zoomout">ZOOM OUT -</button><button id="zoomdef">ZOOM 1:1</button></center>\n'
@@ -2537,6 +2679,7 @@
cmdlinefmt = '^# command \| (?P<cmd>.*)'
kparamsfmt = '^# kparams \| (?P<kp>.*)'
devpropfmt = '# Device Properties: .*'
+ pinfofmt = '# platform-(?P<val>[a-z,A-Z,0-9]*): (?P<info>.*)'
tracertypefmt = '# tracer: (?P<t>.*)'
firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$'
procexecfmt = 'ps - (?P<ps>.*)$'
@@ -2571,12 +2714,6 @@
self.ftrace_line_fmt = self.ftrace_line_fmt_nop
else:
doError('Invalid tracer format: [%s]' % tracer)
- def decode(self, data):
- try:
- out = base64.b64decode(data).decode('zlib')
- except:
- out = data
- return out
def stampInfo(self, line):
if re.match(self.stampfmt, line):
self.stamp = line
@@ -2660,7 +2797,7 @@
if len(self.mcelog) > data.testnumber:
m = re.match(self.mcelogfmt, self.mcelog[data.testnumber])
if m:
- data.mcelog = self.decode(m.group('m'))
+ data.mcelog = sv.b64unzip(m.group('m'))
# turbostat data
if len(self.turbostat) > data.testnumber:
m = re.match(self.tstatfmt, self.turbostat[data.testnumber])
@@ -2681,6 +2818,46 @@
m = re.match(self.testerrfmt, self.testerror[data.testnumber])
if m:
data.enterfail = m.group('e')
+ def devprops(self, data):
+ props = dict()
+ devlist = data.split(';')
+ for dev in devlist:
+ f = dev.split(',')
+ if len(f) < 3:
+ continue
+ dev = f[0]
+ props[dev] = DevProps()
+ props[dev].altname = f[1]
+ if int(f[2]):
+ props[dev].isasync = True
+ else:
+ props[dev].isasync = False
+ return props
+ def parseDevprops(self, line, sv):
+ idx = line.index(': ') + 2
+ if idx >= len(line):
+ return
+ props = self.devprops(line[idx:])
+ if sv.suspendmode == 'command' and 'testcommandstring' in props:
+ sv.testcommand = props['testcommandstring'].altname
+ sv.devprops = props
+ def parsePlatformInfo(self, line, sv):
+ m = re.match(self.pinfofmt, line)
+ if not m:
+ return
+ name, info = m.group('val'), m.group('info')
+ if name == 'devinfo':
+ sv.devprops = self.devprops(sv.b64unzip(info))
+ return
+ elif name == 'testcmd':
+ sv.testcommand = info
+ return
+ field = info.split('|')
+ if len(field) < 2:
+ return
+ cmdline = field[0].strip()
+ output = sv.b64unzip(field[1].strip())
+ sv.platinfo.append([name, cmdline, output])
# Class: TestRun
# Description:
@@ -2701,7 +2878,7 @@
process = Popen(c, shell=True, stdout=PIPE)
running = dict()
for line in process.stdout:
- data = line.split()
+ data = ascii(line).split()
pid = data[0]
name = re.sub('[()]', '', data[1])
user = int(data[13])
@@ -2805,7 +2982,11 @@
continue
# device properties line
if(re.match(tp.devpropfmt, line)):
- devProps(line)
+ tp.parseDevprops(line, sysvals)
+ continue
+ # platform info line
+ if(re.match(tp.pinfofmt, line)):
+ tp.parsePlatformInfo(line, sysvals)
continue
# parse only valid lines, if this is not one move on
m = re.match(tp.ftrace_line_fmt, line)
@@ -2902,7 +3083,7 @@
sysvals.setupAllKprobes()
ksuscalls = ['pm_prepare_console']
krescalls = ['pm_restore_console']
- tracewatch = []
+ tracewatch = ['irq_wakeup']
if sysvals.usekprobes:
tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend',
'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON',
@@ -2928,7 +3109,11 @@
continue
# device properties line
if(re.match(tp.devpropfmt, line)):
- devProps(line)
+ tp.parseDevprops(line, sysvals)
+ continue
+ # platform info line
+ if(re.match(tp.pinfofmt, line)):
+ tp.parsePlatformInfo(line, sysvals)
continue
# ignore all other commented lines
if line[0] == '#':
@@ -3001,16 +3186,11 @@
isbegin = False
else:
continue
- m = re.match('(?P<name>.*)\[(?P<val>[0-9]*)\] .*', t.name)
- if(m):
- val = m.group('val')
- if val == '0':
- name = m.group('name')
- else:
- name = m.group('name')+'['+val+']'
+ if '[' in t.name:
+ m = re.match('(?P<name>.*)\[.*', t.name)
else:
m = re.match('(?P<name>.*) .*', t.name)
- name = m.group('name')
+ name = m.group('name')
# ignore these events
if(name.split('[')[0] in tracewatch):
continue
@@ -3045,6 +3225,8 @@
elif(re.match('machine_suspend\[.*', t.name)):
if(isbegin):
lp = data.lastPhase()
+ if lp == 'resume_machine':
+ data.dmesg[lp]['end'] = t.time
phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True)
data.setPhase(phase, t.time, False)
if data.tSuspended == 0:
@@ -3213,11 +3395,11 @@
# add the traceevent data to the device hierarchy
if(sysvals.usetraceevents):
# add actual trace funcs
- for name in test.ttemp:
+ for name in sorted(test.ttemp):
for event in test.ttemp[name]:
data.newActionGlobal(name, event['begin'], event['end'], event['pid'])
# add the kprobe based virtual tracefuncs as actual devices
- for key in tp.ktemp:
+ for key in sorted(tp.ktemp):
name, pid = key
if name not in sysvals.tracefuncs:
continue
@@ -3231,7 +3413,7 @@
data.newActionGlobal(e['name'], kb, ke, pid, color)
# add config base kprobes and dev kprobes
if sysvals.usedevsrc:
- for key in tp.ktemp:
+ for key in sorted(tp.ktemp):
name, pid = key
if name in sysvals.tracefuncs or name not in sysvals.dev_tracefuncs:
continue
@@ -3244,7 +3426,7 @@
if sysvals.usecallgraph:
# add the callgraph data to the device hierarchy
sortlist = dict()
- for key in test.ftemp:
+ for key in sorted(test.ftemp):
proc, pid = key
for cg in test.ftemp[key]:
if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0):
@@ -3582,7 +3764,7 @@
# if trace events are not available, these are better than nothing
if(not sysvals.usetraceevents):
# look for known actions
- for a in at:
+ for a in sorted(at):
if(re.match(at[a]['smsg'], msg)):
if(a not in actions):
actions[a] = []
@@ -3641,7 +3823,7 @@
data.tResumed = data.tSuspended
# fill in any actions we've found
- for name in actions:
+ for name in sorted(actions):
for event in actions[name]:
data.newActionGlobal(name, event['begin'], event['end'])
@@ -3761,7 +3943,7 @@
if lastmode and lastmode != mode and num > 0:
for i in range(2):
s = sorted(tMed[i])
- list[lastmode]['med'][i] = s[int(len(s)/2)]
+ list[lastmode]['med'][i] = s[int(len(s)//2)]
iMed[i] = tMed[i][list[lastmode]['med'][i]]
list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
list[lastmode]['min'] = tMin
@@ -3803,7 +3985,7 @@
if lastmode and num > 0:
for i in range(2):
s = sorted(tMed[i])
- list[lastmode]['med'][i] = s[int(len(s)/2)]
+ list[lastmode]['med'][i] = s[int(len(s)//2)]
iMed[i] = tMed[i][list[lastmode]['med'][i]]
list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num]
list[lastmode]['min'] = tMin
@@ -3845,7 +4027,7 @@
'</tr>\n'
headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan='+\
colspan+'></td></tr>\n'
- for mode in list:
+ for mode in sorted(list):
# header line for each suspend mode
num = 0
tAvg, tMin, tMax, tMed = list[mode]['avg'], list[mode]['min'],\
@@ -3944,7 +4126,8 @@
th.format('Average Time') + th.format('Count') +\
th.format('Worst Time') + th.format('Host (worst time)') +\
th.format('Link (worst time)') + '</tr>\n'
- for name in sorted(devlist, key=lambda k:devlist[k]['worst'], reverse=True):
+ for name in sorted(devlist, key=lambda k:(devlist[k]['worst'], \
+ devlist[k]['total'], devlist[k]['name']), reverse=True):
data = devall[type][name]
data['average'] = data['total'] / data['count']
if data['average'] < limit:
@@ -4085,7 +4268,7 @@
if(tTotal == 0):
doError('No timeline data')
if(len(data.tLow) > 0):
- low_time = '|'.join(data.tLow)
+ low_time = '+'.join(data.tLow)
if sysvals.suspendmode == 'command':
run_time = '%.0f'%((data.end-data.start)*1000)
if sysvals.testcommand:
@@ -4151,7 +4334,7 @@
for group in data.devicegroups:
devlist = []
for phase in group:
- for devname in data.tdevlist[phase]:
+ for devname in sorted(data.tdevlist[phase]):
d = DevItem(data.testnumber, phase, data.dmesg[phase]['list'][devname])
devlist.append(d)
if d.isa('kth'):
@@ -4230,7 +4413,7 @@
for b in phases[dir]:
# draw the devices for this phase
phaselist = data.dmesg[b]['list']
- for d in data.tdevlist[b]:
+ for d in sorted(data.tdevlist[b]):
name = d
drv = ''
dev = phaselist[d]
@@ -4971,13 +5154,9 @@
if mode == 'freeze' and sysvals.haveTurbostat():
# execution will pause here
turbo = sysvals.turbostat()
- if '|' in turbo:
+ if turbo:
tdata['turbo'] = turbo
- else:
- tdata['error'] = turbo
else:
- if sysvals.haveTurbostat():
- sysvals.vprint('WARNING: ignoring turbostat in mode "%s"' % mode)
pf = open(sysvals.powerfile, 'w')
pf.write(mode)
# execution will pause here
@@ -5024,7 +5203,7 @@
op.write(line)
op.close()
sysvals.fsetVal('', 'trace')
- devProps()
+ sysvals.platforminfo()
return testdata
def readFile(file):
@@ -5040,9 +5219,9 @@
# The time string, e.g. "1901m16s"
def ms2nice(val):
val = int(val)
- h = val / 3600000
- m = (val / 60000) % 60
- s = (val / 1000) % 60
+ h = val // 3600000
+ m = (val // 60000) % 60
+ s = (val // 1000) % 60
if h > 0:
return '%d:%02d:%02d' % (h, m, s)
if m > 0:
@@ -5115,127 +5294,6 @@
print(lines[i])
return res
-# Function: devProps
-# Description:
-# Retrieve a list of properties for all devices in the trace log
-def devProps(data=0):
- props = dict()
-
- if data:
- idx = data.index(': ') + 2
- if idx >= len(data):
- return
- devlist = data[idx:].split(';')
- for dev in devlist:
- f = dev.split(',')
- if len(f) < 3:
- continue
- dev = f[0]
- props[dev] = DevProps()
- props[dev].altname = f[1]
- if int(f[2]):
- props[dev].async = True
- else:
- props[dev].async = False
- sysvals.devprops = props
- if sysvals.suspendmode == 'command' and 'testcommandstring' in props:
- sysvals.testcommand = props['testcommandstring'].altname
- return
-
- if(os.path.exists(sysvals.ftracefile) == False):
- doError('%s does not exist' % sysvals.ftracefile)
-
- # first get the list of devices we need properties for
- msghead = 'Additional data added by AnalyzeSuspend'
- alreadystamped = False
- tp = TestProps()
- tf = sysvals.openlog(sysvals.ftracefile, 'r')
- for line in tf:
- if msghead in line:
- alreadystamped = True
- continue
- # determine the trace data type (required for further parsing)
- m = re.match(tp.tracertypefmt, line)
- if(m):
- tp.setTracerType(m.group('t'))
- continue
- # parse only valid lines, if this is not one move on
- m = re.match(tp.ftrace_line_fmt, line)
- if(not m or 'device_pm_callback_start' not in line):
- continue
- m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg'));
- if(not m):
- continue
- dev = m.group('d')
- if dev not in props:
- props[dev] = DevProps()
- tf.close()
-
- if not alreadystamped and sysvals.suspendmode == 'command':
- out = '#\n# '+msghead+'\n# Device Properties: '
- out += 'testcommandstring,%s,0;' % (sysvals.testcommand)
- with sysvals.openlog(sysvals.ftracefile, 'a') as fp:
- fp.write(out+'\n')
- sysvals.devprops = props
- return
-
- # now get the syspath for each of our target devices
- for dirname, dirnames, filenames in os.walk('/sys/devices'):
- if(re.match('.*/power', dirname) and 'async' in filenames):
- dev = dirname.split('/')[-2]
- if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)):
- props[dev].syspath = dirname[:-6]
-
- # now fill in the properties for our target devices
- for dev in props:
- dirname = props[dev].syspath
- if not dirname or not os.path.exists(dirname):
- continue
- with open(dirname+'/power/async') as fp:
- text = fp.read()
- props[dev].async = False
- if 'enabled' in text:
- props[dev].async = True
- fields = os.listdir(dirname)
- if 'product' in fields:
- with open(dirname+'/product') as fp:
- props[dev].altname = fp.read()
- elif 'name' in fields:
- with open(dirname+'/name') as fp:
- props[dev].altname = fp.read()
- elif 'model' in fields:
- with open(dirname+'/model') as fp:
- props[dev].altname = fp.read()
- elif 'description' in fields:
- with open(dirname+'/description') as fp:
- props[dev].altname = fp.read()
- elif 'id' in fields:
- with open(dirname+'/id') as fp:
- props[dev].altname = fp.read()
- elif 'idVendor' in fields and 'idProduct' in fields:
- idv, idp = '', ''
- with open(dirname+'/idVendor') as fp:
- idv = fp.read().strip()
- with open(dirname+'/idProduct') as fp:
- idp = fp.read().strip()
- props[dev].altname = '%s:%s' % (idv, idp)
-
- if props[dev].altname:
- out = props[dev].altname.strip().replace('\n', ' ')
- out = out.replace(',', ' ')
- out = out.replace(';', ' ')
- props[dev].altname = out
-
- # and now write the data to the ftrace file
- if not alreadystamped:
- out = '#\n# '+msghead+'\n# Device Properties: '
- for dev in sorted(props):
- out += props[dev].out(dev)
- with sysvals.openlog(sysvals.ftracefile, 'a') as fp:
- fp.write(out+'\n')
-
- sysvals.devprops = props
-
# Function: getModes
# Description:
# Determine the supported power modes on this system
@@ -5339,11 +5397,11 @@
# search for either an SM table or DMI table
i = base = length = num = 0
while(i < memsize):
- if buf[i:i+4] == '_SM_' and i < memsize - 16:
+ if buf[i:i+4] == b'_SM_' and i < memsize - 16:
length = struct.unpack('H', buf[i+22:i+24])[0]
base, num = struct.unpack('IH', buf[i+24:i+30])
break
- elif buf[i:i+5] == '_DMI_':
+ elif buf[i:i+5] == b'_DMI_':
length = struct.unpack('H', buf[i+6:i+8])[0]
base, num = struct.unpack('IH', buf[i+8:i+14])
break
@@ -5376,15 +5434,15 @@
if 0 == struct.unpack('H', buf[n:n+2])[0]:
break
n += 1
- data = buf[i+size:n+2].split('\0')
+ data = buf[i+size:n+2].split(b'\0')
for name in info:
itype, idxadr = info[name]
if itype == type:
- idx = struct.unpack('B', buf[i+idxadr])[0]
+ idx = struct.unpack('B', buf[i+idxadr:i+idxadr+1])[0]
if idx > 0 and idx < len(data) - 1:
- s = data[idx-1].strip()
- if s and s.lower() != 'to be filled by o.e.m.':
- out[name] = data[idx-1]
+ s = data[idx-1].decode('utf-8')
+ if s.strip() and s.strip().lower() != 'to be filled by o.e.m.':
+ out[name] = s
i = n + 2
count += 1
return out
@@ -5409,7 +5467,7 @@
return (ac, charge)
def displayControl(cmd):
- xset, ret = 'xset -d :0.0 {0}', 0
+ xset, ret = 'timeout 10 xset -d :0.0 {0}', 0
if sysvals.sudouser:
xset = 'sudo -u %s %s' % (sysvals.sudouser, xset)
if cmd == 'init':
@@ -5433,7 +5491,7 @@
fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout
ret = 'unknown'
for line in fp:
- m = re.match('[\s]*Monitor is (?P<m>.*)', line)
+ m = re.match('[\s]*Monitor is (?P<m>.*)', ascii(line))
if(m and len(m.group('m')) >= 2):
out = m.group('m').lower()
ret = out[3:] if out[0:2] == 'in' else out
@@ -5495,10 +5553,11 @@
' OEM Revision : %u\n'\
' Creator ID : %s\n'\
' Creator Revision : 0x%x\n'\
- '' % (table[0], table[0], table[1], table[2], table[3],
- table[4], table[5], table[6], table[7], table[8]))
+ '' % (ascii(table[0]), ascii(table[0]), table[1], table[2],
+ table[3], ascii(table[4]), ascii(table[5]), table[6],
+ ascii(table[7]), table[8]))
- if(table[0] != 'FPDT'):
+ if(table[0] != b'FPDT'):
if(output):
doError('Invalid FPDT table')
return False
@@ -5530,8 +5589,8 @@
return [0, 0]
rechead = struct.unpack('4sI', first)
recdata = fp.read(rechead[1]-8)
- if(rechead[0] == 'FBPT'):
- record = struct.unpack('HBBIQQQQQ', recdata)
+ if(rechead[0] == b'FBPT'):
+ record = struct.unpack('HBBIQQQQQ', recdata[:48])
if(output):
pprint('%s (%s)\n'\
' Reset END : %u ns\n'\
@@ -5539,11 +5598,11 @@
' OS Loader StartImage Start : %u ns\n'\
' ExitBootServices Entry : %u ns\n'\
' ExitBootServices Exit : %u ns'\
- '' % (rectype[header[0]], rechead[0], record[4], record[5],
+ '' % (rectype[header[0]], ascii(rechead[0]), record[4], record[5],
record[6], record[7], record[8]))
- elif(rechead[0] == 'S3PT'):
+ elif(rechead[0] == b'S3PT'):
if(output):
- pprint('%s (%s)' % (rectype[header[0]], rechead[0]))
+ pprint('%s (%s)' % (rectype[header[0]], ascii(rechead[0])))
j = 0
while(j < len(recdata)):
prechead = struct.unpack('HBB', recdata[j:j+4])
@@ -5689,7 +5748,7 @@
def getArgInt(name, args, min, max, main=True):
if main:
try:
- arg = args.next()
+ arg = next(args)
except:
doError(name+': no argument supplied', True)
else:
@@ -5708,7 +5767,7 @@
def getArgFloat(name, args, min, max, main=True):
if main:
try:
- arg = args.next()
+ arg = next(args)
except:
doError(name+': no argument supplied', True)
else:
@@ -5737,9 +5796,12 @@
parseKernelLog(data)
if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)):
appendIncompleteTraceLog(testruns)
+ shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr',
+ 'memsz', 'mode', 'numcpu', 'plat', 'time']
sysvals.vprint('System Info:')
for key in sorted(sysvals.stamp):
- sysvals.vprint(' %-8s : %s' % (key.upper(), sysvals.stamp[key]))
+ if key in shown:
+ sysvals.vprint(' %-8s : %s' % (key.upper(), sysvals.stamp[key]))
if sysvals.kparams:
sysvals.vprint('Kparams:\n %s' % sysvals.kparams)
sysvals.vprint('Command:\n %s' % sysvals.cmdline)
@@ -5768,6 +5830,12 @@
(w[0], w[1])
sysvals.vprint(s)
data.printDetails()
+ if len(sysvals.platinfo) > 0:
+ sysvals.vprint('\nPlatform Info:')
+ for info in sysvals.platinfo:
+ sysvals.vprint(info[0]+' - '+info[1])
+ sysvals.vprint(info[2])
+ sysvals.vprint('')
if sysvals.cgdump:
for data in testruns:
data.debugPrint()
@@ -5951,7 +6019,7 @@
worst[d] = {'name':'', 'time': 0.0}
dev = devices[d] if d in devices else 0
if dev and len(dev.keys()) > 0:
- n = sorted(dev, key=dev.get, reverse=True)[0]
+ n = sorted(dev, key=lambda k:(dev[k], k), reverse=True)[0]
worst[d]['name'], worst[d]['time'] = n, dev[n]
data = {
'mode': stmp[2],
@@ -5976,7 +6044,7 @@
data['funclist'] = find_in_html(html, '<div title="', '" class="traceevent"', False)
return data
-def genHtml(subdir):
+def genHtml(subdir, force=False):
for dirname, dirnames, filenames in os.walk(subdir):
sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = ''
for filename in filenames:
@@ -5986,7 +6054,7 @@
sysvals.ftracefile = os.path.join(dirname, filename)
sysvals.setOutputFile()
if sysvals.ftracefile and sysvals.htmlfile and \
- not os.path.exists(sysvals.htmlfile):
+ (force or not os.path.exists(sysvals.htmlfile)):
pprint('FTRACE: %s' % sysvals.ftracefile)
if sysvals.dmesgfile:
pprint('DMESG : %s' % sysvals.dmesgfile)
@@ -6042,7 +6110,7 @@
# Description:
# Configure the script via the info in a config file
def configFromFile(file):
- Config = ConfigParser.ConfigParser()
+ Config = configparser.ConfigParser()
Config.read(file)
sections = Config.sections()
@@ -6270,7 +6338,7 @@
' default: suspend-{date}-{time}\n'\
' -rtcwake t Wakeup t seconds after suspend, set t to "off" to disable (default: 15)\n'\
' -addlogs Add the dmesg and ftrace logs to the html output\n'\
- ' -turbostat Use turbostat to execute the command in freeze mode (default: disabled)\n'\
+ ' -noturbostat Dont use turbostat in freeze mode (default: disabled)\n'\
' -srgap Add a visible gap in the timeline between sus/res (default: disabled)\n'\
' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\
' -result fn Export a results table to a text file for parsing.\n'\
@@ -6340,7 +6408,7 @@
for arg in args:
if(arg == '-m'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No mode supplied', True)
if val == 'command' and not sysvals.testcommand:
@@ -6384,10 +6452,8 @@
sysvals.dmesglog = True
elif(arg == '-addlogftrace'):
sysvals.ftracelog = True
- elif(arg == '-turbostat'):
- sysvals.tstat = True
- if not sysvals.haveTurbostat():
- doError('Turbostat command not found')
+ elif(arg == '-noturbostat'):
+ sysvals.tstat = False
elif(arg == '-verbose'):
sysvals.verbose = True
elif(arg == '-proc'):
@@ -6400,7 +6466,7 @@
sysvals.gzip = True
elif(arg == '-rs'):
try:
- val = args.next()
+ val = next(args)
except:
doError('-rs requires "enable" or "disable"', True)
if val.lower() in switchvalues:
@@ -6412,7 +6478,7 @@
doError('invalid option: %s, use "enable/disable" or "on/off"' % val, True)
elif(arg == '-display'):
try:
- val = args.next()
+ val = next(args)
except:
doError('-display requires an mode value', True)
disopt = ['on', 'off', 'standby', 'suspend']
@@ -6423,7 +6489,7 @@
sysvals.max_graph_depth = getArgInt('-maxdepth', args, 0, 1000)
elif(arg == '-rtcwake'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No rtcwake time supplied', True)
if val.lower() in switchoff:
@@ -6443,7 +6509,7 @@
sysvals.cgtest = getArgInt('-cgtest', args, 0, 1)
elif(arg == '-cgphase'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No phase name supplied', True)
d = Data(0)
@@ -6453,19 +6519,19 @@
sysvals.cgphase = val
elif(arg == '-cgfilter'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No callgraph functions supplied', True)
sysvals.setCallgraphFilter(val)
elif(arg == '-skipkprobe'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No kprobe functions supplied', True)
sysvals.skipKprobes(val)
elif(arg == '-cgskip'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No file supplied', True)
if val.lower() in switchoff:
@@ -6480,7 +6546,7 @@
sysvals.callloopmaxlen = getArgFloat('-callloop-maxlen', args, 0.0, 1.0)
elif(arg == '-cmd'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No command string supplied', True)
sysvals.testcommand = val
@@ -6495,13 +6561,13 @@
sysvals.multitest['delay'] = getArgInt('-multi n d (delay between tests)', args, 0, 3600)
elif(arg == '-o'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No subdirectory name supplied', True)
sysvals.outdir = sysvals.setOutputFolder(val)
elif(arg == '-config'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No text file supplied', True)
file = sysvals.configFile(val)
@@ -6510,7 +6576,7 @@
configFromFile(file)
elif(arg == '-fadd'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No text file supplied', True)
file = sysvals.configFile(val)
@@ -6519,7 +6585,7 @@
sysvals.addFtraceFilterFunctions(file)
elif(arg == '-dmesg'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No dmesg file supplied', True)
sysvals.notestrun = True
@@ -6528,7 +6594,7 @@
doError('%s does not exist' % sysvals.dmesgfile)
elif(arg == '-ftrace'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No ftrace file supplied', True)
sysvals.notestrun = True
@@ -6537,7 +6603,7 @@
doError('%s does not exist' % sysvals.ftracefile)
elif(arg == '-summary'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No directory supplied', True)
cmd = 'summary'
@@ -6547,13 +6613,13 @@
doError('%s is not accesible' % val)
elif(arg == '-filter'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No devnames supplied', True)
sysvals.setDeviceFilter(val)
elif(arg == '-result'):
try:
- val = args.next()
+ val = next(args)
except:
doError('No result file supplied', True)
sysvals.result = val
