// SPDX-License-Identifier: GPL-2.0-only
/*
 * Novatek NT35950 DriverIC panels driver
 *
 * Copyright (c) 2021 AngeloGioacchino Del Regno
 *                    <angelogioacchino.delregno@somainline.org>
 */
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/regulator/consumer.h>

#include <drm/drm_connector.h>
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>

#define MCS_CMD_MAUCCTR			0xf0 /* Manufacturer command enable */
#define MCS_PARAM_SCALER_FUNCTION	0x58 /* Scale-up function */
#define MCS_PARAM_SCALEUP_MODE		0xc9
 #define MCS_SCALEUP_SIMPLE		0x0
 #define MCS_SCALEUP_BILINEAR		BIT(0)
 #define MCS_SCALEUP_DUPLICATE		(BIT(0) | BIT(4))

/* VESA Display Stream Compression param */
#define MCS_PARAM_VESA_DSC_ON		0x03

/* Data Compression mode */
#define MCS_PARAM_DATA_COMPRESSION	0x90
 #define MCS_DATA_COMPRESSION_NONE	0x00
 #define MCS_DATA_COMPRESSION_FBC	0x02
 #define MCS_DATA_COMPRESSION_DSC	0x03

/* Display Output control */
#define MCS_PARAM_DISP_OUTPUT_CTRL	0xb4
 #define MCS_DISP_OUT_SRAM_EN		BIT(0)
 #define MCS_DISP_OUT_VIDEO_MODE	BIT(4)

/* VESA Display Stream Compression setting */
#define MCS_PARAM_VESA_DSC_SETTING	0xc0

/* SubPixel Rendering (SPR) */
#define MCS_PARAM_SPR_EN		0xe3
#define MCS_PARAM_SPR_MODE		0xef
 #define MCS_SPR_MODE_YYG_RAINBOW_RGB	0x01

#define NT35950_VREG_MAX		4

struct nt35950 {
	struct drm_panel panel;
	struct drm_connector *connector;
	struct mipi_dsi_device *dsi[2];
	struct regulator_bulk_data vregs[NT35950_VREG_MAX];
	struct gpio_desc *reset_gpio;
	const struct nt35950_panel_desc *desc;

	int cur_mode;
	u8 last_page;
};

struct nt35950_panel_mode {
	const struct drm_display_mode mode;

	bool enable_sram;
	bool is_video_mode;
	u8 scaler_on;
	u8 scaler_mode;
	u8 compression;
	u8 spr_en;
	u8 spr_mode;
};

struct nt35950_panel_desc {
	const char *model_name;
	const struct mipi_dsi_device_info dsi_info;
	const struct nt35950_panel_mode *mode_data;

	bool is_dual_dsi;
	u8 num_lanes;
	u8 num_modes;
};

static inline struct nt35950 *to_nt35950(struct drm_panel *panel)
{
	return container_of(panel, struct nt35950, panel);
}

static void nt35950_reset(struct nt35950 *nt)
{
	gpiod_set_value_cansleep(nt->reset_gpio, 1);
	usleep_range(12000, 13000);
	gpiod_set_value_cansleep(nt->reset_gpio, 0);
	usleep_range(300, 400);
	gpiod_set_value_cansleep(nt->reset_gpio, 1);
	usleep_range(12000, 13000);
}

/*
 * nt35950_set_cmd2_page - Select manufacturer control (CMD2) page
 * @dsi_ctx: context for mipi_dsi functions
 * @nt:   Main driver structure
 * @page: Page number (0-7)
 */
static void nt35950_set_cmd2_page(struct mipi_dsi_multi_context *dsi_ctx,
				  struct nt35950 *nt, u8 page)
{
	const u8 mauc_cmd2_page[] = { MCS_CMD_MAUCCTR, 0x55, 0xaa, 0x52,
				      0x08, page };

	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, mauc_cmd2_page,
					ARRAY_SIZE(mauc_cmd2_page));
	if (!dsi_ctx->accum_err)
		nt->last_page = page;
}

/*
 * nt35950_set_data_compression - Set data compression mode
 * @dsi_ctx: context for mipi_dsi functions
 * @nt:        Main driver structure
 * @comp_mode: Compression mode
 */
static void nt35950_set_data_compression(struct mipi_dsi_multi_context *dsi_ctx,
					 struct nt35950 *nt, u8 comp_mode)
{
	u8 cmd_data_compression[] = { MCS_PARAM_DATA_COMPRESSION, comp_mode };
	u8 cmd_vesa_dsc_on[] = { MCS_PARAM_VESA_DSC_ON, !!comp_mode };
	u8 cmd_vesa_dsc_setting[] = { MCS_PARAM_VESA_DSC_SETTING, 0x03 };
	u8 last_page = nt->last_page;

	/* Set CMD2 Page 0 if we're not there yet */
	if (last_page != 0)
		nt35950_set_cmd2_page(dsi_ctx, nt, 0);

	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_data_compression,
					ARRAY_SIZE(cmd_data_compression));
	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_vesa_dsc_on,
					ARRAY_SIZE(cmd_vesa_dsc_on));

	/* Set the vesa dsc setting on Page 4 */
	nt35950_set_cmd2_page(dsi_ctx, nt, 4);

	/* Display Stream Compression setting, always 0x03 */
	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_vesa_dsc_setting,
					ARRAY_SIZE(cmd_vesa_dsc_setting));

	/* Get back to the previously set page */
	nt35950_set_cmd2_page(dsi_ctx, nt, last_page);
}

/*
 * nt35950_set_scaler - Enable/disable resolution upscaling
 * @dsi_ctx: context for mipi_dsi functions
 * @scale_up:  Scale up function control
 */
static void nt35950_set_scaler(struct mipi_dsi_multi_context *dsi_ctx,
			       u8 scale_up)
{
	u8 cmd_scaler[] = { MCS_PARAM_SCALER_FUNCTION, scale_up };

	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_scaler,
					ARRAY_SIZE(cmd_scaler));
}

/*
 * nt35950_set_scale_mode - Resolution upscaling mode
 * @dsi_ctx: context for mipi_dsi functions
 * @mode: Scaler mode (MCS_DATA_COMPRESSION_*)
 */
static void nt35950_set_scale_mode(struct mipi_dsi_multi_context *dsi_ctx,
				   u8 mode)
{
	u8 cmd_scaler[] = { MCS_PARAM_SCALEUP_MODE, mode };

	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_scaler,
					ARRAY_SIZE(cmd_scaler));
}

/*
 * nt35950_inject_black_image - Display a completely black image
 * @dsi_ctx: context for mipi_dsi functions
 *
 * After IC setup, the attached panel may show random data
 * due to driveric behavior changes (resolution, compression,
 * scaling, etc). This function, called after parameters setup,
 * makes the driver ic to output a completely black image to
 * the display.
 * It makes sense to push a black image before sending the sleep-out
 * and display-on commands.
 */
static void nt35950_inject_black_image(struct mipi_dsi_multi_context *dsi_ctx)
{
	const u8 cmd0_black_img[] = { 0x6f, 0x01 };
	const u8 cmd1_black_img[] = { 0xf3, 0x10 };
	u8 cmd_test[] = { 0xff, 0xaa, 0x55, 0xa5, 0x80 };

	/* Enable test command */
	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_test, ARRAY_SIZE(cmd_test));

	/* Send a black image */
	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd0_black_img,
					ARRAY_SIZE(cmd0_black_img));
	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd1_black_img,
					ARRAY_SIZE(cmd1_black_img));

	/* Disable test command */
	cmd_test[ARRAY_SIZE(cmd_test) - 1] = 0x00;
	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_test, ARRAY_SIZE(cmd_test));
}

/*
 * nt35950_set_dispout - Set Display Output register parameters
 * @nt:    Main driver structure
 * @dsi_ctx: context for mipi_dsi functions
 */
static void nt35950_set_dispout(struct mipi_dsi_multi_context *dsi_ctx,
				struct nt35950 *nt)
{
	u8 cmd_dispout[] = { MCS_PARAM_DISP_OUTPUT_CTRL, 0x00 };
	const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;

	if (mode_data[nt->cur_mode].is_video_mode)
		cmd_dispout[1] |= MCS_DISP_OUT_VIDEO_MODE;
	if (mode_data[nt->cur_mode].enable_sram)
		cmd_dispout[1] |= MCS_DISP_OUT_SRAM_EN;

	mipi_dsi_dcs_write_buffer_multi(dsi_ctx, cmd_dispout,
					ARRAY_SIZE(cmd_dispout));
}

static int nt35950_get_current_mode(struct nt35950 *nt)
{
	struct drm_connector *connector = nt->connector;
	struct drm_crtc_state *crtc_state;
	int i;

	/* Return the default (first) mode if no info available yet */
	if (!connector->state || !connector->state->crtc)
		return 0;

	crtc_state = connector->state->crtc->state;

	for (i = 0; i < nt->desc->num_modes; i++) {
		if (drm_mode_match(&crtc_state->mode,
				   &nt->desc->mode_data[i].mode,
				   DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK))
			return i;
	}

	return 0;
}

static int nt35950_on(struct nt35950 *nt)
{
	const struct nt35950_panel_mode *mode_data = nt->desc->mode_data;
	struct mipi_dsi_device *dsi = nt->dsi[0];
	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };

	nt->cur_mode = nt35950_get_current_mode(nt);
	nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
	nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;

	nt35950_set_cmd2_page(&dsi_ctx, nt, 0);
	nt35950_set_data_compression(&dsi_ctx, nt, mode_data[nt->cur_mode].compression);
	nt35950_set_scale_mode(&dsi_ctx, mode_data[nt->cur_mode].scaler_mode);
	nt35950_set_scaler(&dsi_ctx, mode_data[nt->cur_mode].scaler_on);
	nt35950_set_dispout(&dsi_ctx, nt);

	mipi_dsi_dcs_set_tear_on_multi(&dsi_ctx, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
	mipi_dsi_dcs_set_tear_scanline_multi(&dsi_ctx, 0);

	/* CMD2 Page 1 */
	nt35950_set_cmd2_page(&dsi_ctx, nt, 1);

	/* Unknown command */
	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, 0xd4, 0x88, 0x88);

	/* CMD2 Page 7 */
	nt35950_set_cmd2_page(&dsi_ctx, nt, 7);

	/* Enable SubPixel Rendering */
	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PARAM_SPR_EN, 0x01);

	/* SPR Mode: YYG Rainbow-RGB */
	mipi_dsi_dcs_write_seq_multi(&dsi_ctx, MCS_PARAM_SPR_MODE,
				     MCS_SPR_MODE_YYG_RAINBOW_RGB);

	/* CMD3 */
	nt35950_inject_black_image(&dsi_ctx);
	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
	mipi_dsi_msleep(&dsi_ctx, 120);

	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
	mipi_dsi_msleep(&dsi_ctx, 120);

	if (dsi_ctx.accum_err)
		return dsi_ctx.accum_err;

	nt->dsi[0]->mode_flags &= ~MIPI_DSI_MODE_LPM;
	nt->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM;

	return 0;
}

static void nt35950_off(struct nt35950 *nt)
{
	struct mipi_dsi_device *dsi = nt->dsi[0];
	struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };

	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
	mipi_dsi_usleep_range(&dsi_ctx, 10000, 11000);

	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
	mipi_dsi_msleep(&dsi_ctx, 150);

	nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM;
	nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM;
}

static int nt35950_sharp_init_vregs(struct nt35950 *nt, struct device *dev)
{
	int ret;

	nt->vregs[0].supply = "vddio";
	nt->vregs[1].supply = "avdd";
	nt->vregs[2].supply = "avee";
	nt->vregs[3].supply = "dvdd";
	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->vregs),
				      nt->vregs);
	if (ret < 0)
		return ret;

	ret = regulator_is_supported_voltage(nt->vregs[0].consumer,
					     1750000, 1950000);
	if (!ret)
		return -EINVAL;
	ret = regulator_is_supported_voltage(nt->vregs[1].consumer,
					     5200000, 5900000);
	if (!ret)
		return -EINVAL;
	/* AVEE is negative: -5.90V to -5.20V */
	ret = regulator_is_supported_voltage(nt->vregs[2].consumer,
					     5200000, 5900000);
	if (!ret)
		return -EINVAL;

	ret = regulator_is_supported_voltage(nt->vregs[3].consumer,
					     1300000, 1400000);
	if (!ret)
		return -EINVAL;

	return 0;
}

static int nt35950_prepare(struct drm_panel *panel)
{
	struct nt35950 *nt = to_nt35950(panel);
	int ret;

	ret = regulator_enable(nt->vregs[0].consumer);
	if (ret)
		return ret;
	usleep_range(2000, 5000);

	ret = regulator_enable(nt->vregs[3].consumer);
	if (ret)
		goto end;
	usleep_range(15000, 18000);

	ret = regulator_enable(nt->vregs[1].consumer);
	if (ret)
		goto end;

	ret = regulator_enable(nt->vregs[2].consumer);
	if (ret)
		goto end;
	usleep_range(12000, 13000);

	nt35950_reset(nt);

	ret = nt35950_on(nt);

end:
	if (ret < 0) {
		regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs);
		return ret;
	}

	return 0;
}

static int nt35950_unprepare(struct drm_panel *panel)
{
	struct nt35950 *nt = to_nt35950(panel);

	nt35950_off(nt);

	gpiod_set_value_cansleep(nt->reset_gpio, 0);
	regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs);

	return 0;
}

static int nt35950_get_modes(struct drm_panel *panel,
			     struct drm_connector *connector)
{
	struct nt35950 *nt = to_nt35950(panel);
	int i;

	for (i = 0; i < nt->desc->num_modes; i++) {
		struct drm_display_mode *mode;

		mode = drm_mode_duplicate(connector->dev,
					  &nt->desc->mode_data[i].mode);
		if (!mode)
			return -ENOMEM;

		drm_mode_set_name(mode);

		mode->type |= DRM_MODE_TYPE_DRIVER;
		if (nt->desc->num_modes == 1)
			mode->type |= DRM_MODE_TYPE_PREFERRED;

		drm_mode_probed_add(connector, mode);
	}

	connector->display_info.bpc = 8;
	connector->display_info.height_mm = nt->desc->mode_data[0].mode.height_mm;
	connector->display_info.width_mm = nt->desc->mode_data[0].mode.width_mm;
	nt->connector = connector;

	return nt->desc->num_modes;
}

static const struct drm_panel_funcs nt35950_panel_funcs = {
	.prepare = nt35950_prepare,
	.unprepare = nt35950_unprepare,
	.get_modes = nt35950_get_modes,
};

static int nt35950_probe(struct mipi_dsi_device *dsi)
{
	struct device *dev = &dsi->dev;
	struct device_node *dsi_r;
	struct mipi_dsi_host *dsi_r_host;
	struct nt35950 *nt;
	const struct mipi_dsi_device_info *info;
	int i, num_dsis = 1, ret;

	nt = devm_kzalloc(dev, sizeof(*nt), GFP_KERNEL);
	if (!nt)
		return -ENOMEM;

	ret = nt35950_sharp_init_vregs(nt, dev);
	if (ret)
		return dev_err_probe(dev, ret, "Regulator init failure.\n");

	nt->desc = of_device_get_match_data(dev);
	if (!nt->desc)
		return -ENODEV;

	nt->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS);
	if (IS_ERR(nt->reset_gpio)) {
		return dev_err_probe(dev, PTR_ERR(nt->reset_gpio),
				     "Failed to get reset gpio\n");
	}

	/* If the panel is connected on two DSIs then DSI0 left, DSI1 right */
	if (nt->desc->is_dual_dsi) {
		info = &nt->desc->dsi_info;
		dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
		if (!dsi_r) {
			dev_err(dev, "Cannot get secondary DSI node.\n");
			return -ENODEV;
		}
		dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r);
		of_node_put(dsi_r);
		if (!dsi_r_host)
			return dev_err_probe(dev, -EPROBE_DEFER, "Cannot get secondary DSI host\n");

		nt->dsi[1] = mipi_dsi_device_register_full(dsi_r_host, info);
		if (!nt->dsi[1]) {
			dev_err(dev, "Cannot get secondary DSI node\n");
			return -ENODEV;
		}
		num_dsis++;
	}

	nt->dsi[0] = dsi;
	mipi_dsi_set_drvdata(dsi, nt);

	drm_panel_init(&nt->panel, dev, &nt35950_panel_funcs,
		       DRM_MODE_CONNECTOR_DSI);

	ret = drm_panel_of_backlight(&nt->panel);
	if (ret) {
		if (num_dsis == 2)
			mipi_dsi_device_unregister(nt->dsi[1]);

		return dev_err_probe(dev, ret, "Failed to get backlight\n");
	}

	drm_panel_add(&nt->panel);

	for (i = 0; i < num_dsis; i++) {
		nt->dsi[i]->lanes = nt->desc->num_lanes;
		nt->dsi[i]->format = MIPI_DSI_FMT_RGB888;

		nt->dsi[i]->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
					 MIPI_DSI_MODE_LPM;

		if (nt->desc->mode_data[0].is_video_mode)
			nt->dsi[i]->mode_flags |= MIPI_DSI_MODE_VIDEO;

		ret = mipi_dsi_attach(nt->dsi[i]);
		if (ret < 0) {
			/* If we fail to attach to either host, we're done */
			if (num_dsis == 2)
				mipi_dsi_device_unregister(nt->dsi[1]);

			return dev_err_probe(dev, ret,
					     "Cannot attach to DSI%d host.\n", i);
		}
	}

	/* Make sure to set RESX LOW before starting the power-on sequence */
	gpiod_set_value_cansleep(nt->reset_gpio, 0);
	return 0;
}

static void nt35950_remove(struct mipi_dsi_device *dsi)
{
	struct nt35950 *nt = mipi_dsi_get_drvdata(dsi);
	int ret;

	ret = mipi_dsi_detach(nt->dsi[0]);
	if (ret < 0)
		dev_err(&dsi->dev,
			"Failed to detach from DSI0 host: %d\n", ret);

	if (nt->dsi[1]) {
		ret = mipi_dsi_detach(nt->dsi[1]);
		if (ret < 0)
			dev_err(&dsi->dev,
				"Failed to detach from DSI1 host: %d\n", ret);
		mipi_dsi_device_unregister(nt->dsi[1]);
	}

	drm_panel_remove(&nt->panel);
}

static const struct nt35950_panel_mode sharp_ls055d1sx04_modes[] = {
	{
		/* 1920x1080 60Hz no compression */
		.mode = {
			.clock = 214537,
			.hdisplay = 1080,
			.hsync_start = 1080 + 400,
			.hsync_end = 1080 + 400 + 40,
			.htotal = 1080 + 400 + 40 + 300,
			.vdisplay = 1920,
			.vsync_start = 1920 + 12,
			.vsync_end = 1920 + 12 + 2,
			.vtotal = 1920 + 12 + 2 + 10,
			.width_mm = 68,
			.height_mm = 121,
		},
		.compression = MCS_DATA_COMPRESSION_NONE,
		.enable_sram = true,
		.is_video_mode = false,
		.scaler_on = 1,
		.scaler_mode = MCS_SCALEUP_DUPLICATE,
	},
	/* TODO: Add 2160x3840 60Hz when DSC is supported */
};

static const struct nt35950_panel_desc sharp_ls055d1sx04 = {
	.model_name = "Sharp LS055D1SX04",
	.dsi_info = {
		.type = "LS055D1SX04",
		.channel = 0,
		.node = NULL,
	},
	.mode_data = sharp_ls055d1sx04_modes,
	.num_modes = ARRAY_SIZE(sharp_ls055d1sx04_modes),
	.is_dual_dsi = true,
	.num_lanes = 4,
};

static const struct of_device_id nt35950_of_match[] = {
	{ .compatible = "sharp,ls055d1sx04", .data = &sharp_ls055d1sx04 },
	{  }
};
MODULE_DEVICE_TABLE(of, nt35950_of_match);

static struct mipi_dsi_driver nt35950_driver = {
	.probe = nt35950_probe,
	.remove = nt35950_remove,
	.driver = {
		.name = "panel-novatek-nt35950",
		.of_match_table = nt35950_of_match,
	},
};
module_mipi_dsi_driver(nt35950_driver);

MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>");
MODULE_DESCRIPTION("Novatek NT35950 DriverIC panels driver");
MODULE_LICENSE("GPL v2");