| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * drivers/i2c/busses/i2c-tegra-bpmp.c |
| * |
| * Copyright (c) 2016 NVIDIA Corporation. All rights reserved. |
| * |
| * Author: Shardar Shariff Md <smohammed@nvidia.com> |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <soc/tegra/bpmp-abi.h> |
| #include <soc/tegra/bpmp.h> |
| |
| /* |
| * Serialized I2C message header size is 6 bytes and includes address, flags |
| * and length |
| */ |
| #define SERIALI2C_HDR_SIZE 6 |
| |
| struct tegra_bpmp_i2c { |
| struct i2c_adapter adapter; |
| struct device *dev; |
| |
| struct tegra_bpmp *bpmp; |
| unsigned int bus; |
| }; |
| |
| /* |
| * Linux flags are translated to BPMP defined I2C flags that are used in BPMP |
| * firmware I2C driver to avoid any issues in future if Linux I2C flags are |
| * changed. |
| */ |
| static void tegra_bpmp_xlate_flags(u16 flags, u16 *out) |
| { |
| if (flags & I2C_M_TEN) |
| *out |= SERIALI2C_TEN; |
| |
| if (flags & I2C_M_RD) |
| *out |= SERIALI2C_RD; |
| |
| if (flags & I2C_M_STOP) |
| *out |= SERIALI2C_STOP; |
| |
| if (flags & I2C_M_NOSTART) |
| *out |= SERIALI2C_NOSTART; |
| |
| if (flags & I2C_M_REV_DIR_ADDR) |
| *out |= SERIALI2C_REV_DIR_ADDR; |
| |
| if (flags & I2C_M_IGNORE_NAK) |
| *out |= SERIALI2C_IGNORE_NAK; |
| |
| if (flags & I2C_M_NO_RD_ACK) |
| *out |= SERIALI2C_NO_RD_ACK; |
| |
| if (flags & I2C_M_RECV_LEN) |
| *out |= SERIALI2C_RECV_LEN; |
| } |
| |
| /* |
| * The serialized I2C format is simply the following: |
| * [addr little-endian][flags little-endian][len little-endian][data if write] |
| * [addr little-endian][flags little-endian][len little-endian][data if write] |
| * ... |
| * |
| * The flags are translated from Linux kernel representation to seriali2c |
| * representation. Any undefined flag being set causes an error. |
| * |
| * The data is there only for writes. Reads have the data transferred in the |
| * other direction, and thus data is not present. |
| * |
| * See deserialize_i2c documentation for the data format in the other direction. |
| */ |
| static void tegra_bpmp_serialize_i2c_msg(struct tegra_bpmp_i2c *i2c, |
| struct mrq_i2c_request *request, |
| struct i2c_msg *msgs, |
| unsigned int num) |
| { |
| char *buf = request->xfer.data_buf; |
| unsigned int i, j, pos = 0; |
| |
| for (i = 0; i < num; i++) { |
| struct i2c_msg *msg = &msgs[i]; |
| u16 flags = 0; |
| |
| tegra_bpmp_xlate_flags(msg->flags, &flags); |
| |
| buf[pos++] = msg->addr & 0xff; |
| buf[pos++] = (msg->addr & 0xff00) >> 8; |
| buf[pos++] = flags & 0xff; |
| buf[pos++] = (flags & 0xff00) >> 8; |
| buf[pos++] = msg->len & 0xff; |
| buf[pos++] = (msg->len & 0xff00) >> 8; |
| |
| if ((flags & SERIALI2C_RD) == 0) { |
| for (j = 0; j < msg->len; j++) |
| buf[pos++] = msg->buf[j]; |
| } |
| } |
| |
| request->xfer.data_size = pos; |
| } |
| |
| /* |
| * The data in the BPMP -> CPU direction is composed of sequential blocks for |
| * those messages that have I2C_M_RD. So, for example, if you have: |
| * |
| * - !I2C_M_RD, len == 5, data == a0 01 02 03 04 |
| * - !I2C_M_RD, len == 1, data == a0 |
| * - I2C_M_RD, len == 2, data == [uninitialized buffer 1] |
| * - !I2C_M_RD, len == 1, data == a2 |
| * - I2C_M_RD, len == 2, data == [uninitialized buffer 2] |
| * |
| * ...then the data in the BPMP -> CPU direction would be 4 bytes total, and |
| * would contain 2 bytes that will go to uninitialized buffer 1, and 2 bytes |
| * that will go to uninitialized buffer 2. |
| */ |
| static int tegra_bpmp_i2c_deserialize(struct tegra_bpmp_i2c *i2c, |
| struct mrq_i2c_response *response, |
| struct i2c_msg *msgs, |
| unsigned int num) |
| { |
| size_t size = response->xfer.data_size, len = 0, pos = 0; |
| char *buf = response->xfer.data_buf; |
| unsigned int i; |
| |
| for (i = 0; i < num; i++) |
| if (msgs[i].flags & I2C_M_RD) |
| len += msgs[i].len; |
| |
| if (len != size) |
| return -EINVAL; |
| |
| for (i = 0; i < num; i++) { |
| if (msgs[i].flags & I2C_M_RD) { |
| memcpy(msgs[i].buf, buf + pos, msgs[i].len); |
| pos += msgs[i].len; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_bpmp_i2c_msg_len_check(struct i2c_msg *msgs, unsigned int num) |
| { |
| size_t tx_len = 0, rx_len = 0; |
| unsigned int i; |
| |
| for (i = 0; i < num; i++) |
| if (!(msgs[i].flags & I2C_M_RD)) |
| tx_len += SERIALI2C_HDR_SIZE + msgs[i].len; |
| |
| if (tx_len > TEGRA_I2C_IPC_MAX_IN_BUF_SIZE) |
| return -EINVAL; |
| |
| for (i = 0; i < num; i++) |
| if ((msgs[i].flags & I2C_M_RD)) |
| rx_len += msgs[i].len; |
| |
| if (rx_len > TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int tegra_bpmp_i2c_msg_xfer(struct tegra_bpmp_i2c *i2c, |
| struct mrq_i2c_request *request, |
| struct mrq_i2c_response *response, |
| bool atomic) |
| { |
| struct tegra_bpmp_message msg; |
| int err; |
| |
| request->cmd = CMD_I2C_XFER; |
| request->xfer.bus_id = i2c->bus; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.mrq = MRQ_I2C; |
| msg.tx.data = request; |
| msg.tx.size = sizeof(*request); |
| msg.rx.data = response; |
| msg.rx.size = sizeof(*response); |
| |
| if (atomic) |
| err = tegra_bpmp_transfer_atomic(i2c->bpmp, &msg); |
| else |
| err = tegra_bpmp_transfer(i2c->bpmp, &msg); |
| |
| if (err < 0) { |
| dev_err(i2c->dev, "failed to transfer message: %d\n", err); |
| return err; |
| } |
| |
| if (msg.rx.ret != 0) { |
| if (msg.rx.ret == -BPMP_EAGAIN) { |
| dev_dbg(i2c->dev, "arbitration lost\n"); |
| return -EAGAIN; |
| } |
| |
| if (msg.rx.ret == -BPMP_ETIMEDOUT) { |
| dev_dbg(i2c->dev, "timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| if (msg.rx.ret == -BPMP_ENXIO) { |
| dev_dbg(i2c->dev, "NAK\n"); |
| return -ENXIO; |
| } |
| |
| dev_err(i2c->dev, "transaction failed: %d\n", msg.rx.ret); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int tegra_bpmp_i2c_xfer_common(struct i2c_adapter *adapter, |
| struct i2c_msg *msgs, int num, |
| bool atomic) |
| { |
| struct tegra_bpmp_i2c *i2c = i2c_get_adapdata(adapter); |
| struct mrq_i2c_response response; |
| struct mrq_i2c_request request; |
| int err; |
| |
| err = tegra_bpmp_i2c_msg_len_check(msgs, num); |
| if (err < 0) { |
| dev_err(i2c->dev, "unsupported message length\n"); |
| return err; |
| } |
| |
| memset(&request, 0, sizeof(request)); |
| memset(&response, 0, sizeof(response)); |
| |
| tegra_bpmp_serialize_i2c_msg(i2c, &request, msgs, num); |
| err = tegra_bpmp_i2c_msg_xfer(i2c, &request, &response, atomic); |
| if (err < 0) { |
| dev_err(i2c->dev, "failed to transfer message: %d\n", err); |
| return err; |
| } |
| |
| err = tegra_bpmp_i2c_deserialize(i2c, &response, msgs, num); |
| if (err < 0) { |
| dev_err(i2c->dev, "failed to deserialize message: %d\n", err); |
| return err; |
| } |
| |
| return num; |
| } |
| |
| static int tegra_bpmp_i2c_xfer(struct i2c_adapter *adapter, |
| struct i2c_msg *msgs, int num) |
| { |
| return tegra_bpmp_i2c_xfer_common(adapter, msgs, num, false); |
| } |
| |
| static int tegra_bpmp_i2c_xfer_atomic(struct i2c_adapter *adapter, |
| struct i2c_msg *msgs, int num) |
| { |
| return tegra_bpmp_i2c_xfer_common(adapter, msgs, num, true); |
| } |
| |
| static u32 tegra_bpmp_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | |
| I2C_FUNC_PROTOCOL_MANGLING | I2C_FUNC_NOSTART; |
| } |
| |
| static const struct i2c_algorithm tegra_bpmp_i2c_algo = { |
| .xfer = tegra_bpmp_i2c_xfer, |
| .xfer_atomic = tegra_bpmp_i2c_xfer_atomic, |
| .functionality = tegra_bpmp_i2c_func, |
| }; |
| |
| static int tegra_bpmp_i2c_probe(struct platform_device *pdev) |
| { |
| struct tegra_bpmp_i2c *i2c; |
| u32 value; |
| int err; |
| |
| i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); |
| if (!i2c) |
| return -ENOMEM; |
| |
| i2c->dev = &pdev->dev; |
| |
| i2c->bpmp = dev_get_drvdata(pdev->dev.parent); |
| if (!i2c->bpmp) |
| return -ENODEV; |
| |
| err = of_property_read_u32(pdev->dev.of_node, "nvidia,bpmp-bus-id", |
| &value); |
| if (err < 0) |
| return err; |
| |
| i2c->bus = value; |
| |
| i2c_set_adapdata(&i2c->adapter, i2c); |
| i2c->adapter.owner = THIS_MODULE; |
| strscpy(i2c->adapter.name, "Tegra BPMP I2C adapter", |
| sizeof(i2c->adapter.name)); |
| i2c->adapter.algo = &tegra_bpmp_i2c_algo; |
| i2c->adapter.dev.parent = &pdev->dev; |
| i2c->adapter.dev.of_node = pdev->dev.of_node; |
| |
| platform_set_drvdata(pdev, i2c); |
| |
| return i2c_add_adapter(&i2c->adapter); |
| } |
| |
| static void tegra_bpmp_i2c_remove(struct platform_device *pdev) |
| { |
| struct tegra_bpmp_i2c *i2c = platform_get_drvdata(pdev); |
| |
| i2c_del_adapter(&i2c->adapter); |
| } |
| |
| static const struct of_device_id tegra_bpmp_i2c_of_match[] = { |
| { .compatible = "nvidia,tegra186-bpmp-i2c", }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, tegra_bpmp_i2c_of_match); |
| |
| static struct platform_driver tegra_bpmp_i2c_driver = { |
| .driver = { |
| .name = "tegra-bpmp-i2c", |
| .of_match_table = tegra_bpmp_i2c_of_match, |
| }, |
| .probe = tegra_bpmp_i2c_probe, |
| .remove_new = tegra_bpmp_i2c_remove, |
| }; |
| module_platform_driver(tegra_bpmp_i2c_driver); |
| |
| MODULE_DESCRIPTION("NVIDIA Tegra BPMP I2C bus controller driver"); |
| MODULE_AUTHOR("Shardar Shariff Md <smohammed@nvidia.com>"); |
| MODULE_AUTHOR("Juha-Matti Tilli"); |
| MODULE_LICENSE("GPL v2"); |