watchdog: add nowayout helpers to Watchdog Timer Driver Kernel API
Add two nowayout helpers for the Watchdog Timer Driver Kernel API.
And apply this to the already converted drivers.
Note: s3c2410_wdt lost the nowayout feature during the conversion.
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt
index 4f7c894..4b93c28 100644
--- a/Documentation/watchdog/watchdog-kernel-api.txt
+++ b/Documentation/watchdog/watchdog-kernel-api.txt
@@ -1,6 +1,6 @@
The Linux WatchDog Timer Driver Core kernel API.
===============================================
-Last reviewed: 22-Jul-2011
+Last reviewed: 29-Nov-2011
Wim Van Sebroeck <wim@iguana.be>
@@ -142,6 +142,14 @@
* WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog.
If this bit is set then the watchdog timer will not be able to stop.
+ To set the WDOG_NO_WAY_OUT status bit (before registering your watchdog
+ timer device) you can either:
+ * set it statically in your watchdog_device struct with
+ .status = WATCHDOG_NOWAYOUT_INIT_STATUS,
+ (this will set the value the same as CONFIG_WATCHDOG_NOWAYOUT) or
+ * use the following helper function:
+ static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout)
+
Note: The WatchDog Timer Driver Core supports the magic close feature and
the nowayout feature. To use the magic close feature you must set the
WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure.
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index a79e384..4bc3744 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -378,6 +378,8 @@
"cannot start\n");
}
+ watchdog_set_nowayout(&s3c2410_wdd, nowayout);
+
ret = watchdog_register_device(&s3c2410_wdd);
if (ret) {
dev_err(dev, "cannot register watchdog (%d)\n", ret);
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
index beb3ad2..6cd1ba41 100644
--- a/drivers/watchdog/wm831x_wdt.c
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -213,11 +213,9 @@
wm831x_wdt->info = &wm831x_wdt_info;
wm831x_wdt->ops = &wm831x_wdt_ops;
+ watchdog_set_nowayout(wm831x_wdt, nowayout);
watchdog_set_drvdata(wm831x_wdt, driver_data);
- if (nowayout)
- wm831x_wdt->status |= WDOG_NO_WAY_OUT;
-
reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
reg &= WM831X_WDOG_TO_MASK;
for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index 111843f..43ba5b3c 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -53,11 +53,7 @@
#ifdef __KERNEL__
-#ifdef CONFIG_WATCHDOG_NOWAYOUT
-#define WATCHDOG_NOWAYOUT 1
-#else
-#define WATCHDOG_NOWAYOUT 0
-#endif
+#include <linux/bitops.h>
struct watchdog_ops;
struct watchdog_device;
@@ -122,6 +118,21 @@
#define WDOG_NO_WAY_OUT 3 /* Is 'nowayout' feature set ? */
};
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+#define WATCHDOG_NOWAYOUT 1
+#define WATCHDOG_NOWAYOUT_INIT_STATUS (1 << WDOG_NO_WAY_OUT)
+#else
+#define WATCHDOG_NOWAYOUT 0
+#define WATCHDOG_NOWAYOUT_INIT_STATUS 0
+#endif
+
+/* Use the following function to set the nowayout feature */
+static inline void watchdog_set_nowayout(struct watchdog_device *wdd, int nowayout)
+{
+ if (nowayout)
+ set_bit(WDOG_NO_WAY_OUT, &wdd->status);
+}
+
/* Use the following functions to manipulate watchdog driver specific data */
static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data)
{
