| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * composite.h -- framework for usb gadgets which are composite devices |
| * |
| * Copyright (C) 2006-2008 David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #ifndef __LINUX_USB_COMPOSITE_H |
| #define __LINUX_USB_COMPOSITE_H |
| |
| /* |
| * This framework is an optional layer on top of the USB Gadget interface, |
| * making it easier to build (a) Composite devices, supporting multiple |
| * functions within any single configuration, and (b) Multi-configuration |
| * devices, also supporting multiple functions but without necessarily |
| * having more than one function per configuration. |
| * |
| * Example: a device with a single configuration supporting both network |
| * link and mass storage functions is a composite device. Those functions |
| * might alternatively be packaged in individual configurations, but in |
| * the composite model the host can use both functions at the same time. |
| */ |
| |
| #include <linux/bcd.h> |
| #include <linux/version.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/log2.h> |
| #include <linux/configfs.h> |
| |
| /* |
| * USB function drivers should return USB_GADGET_DELAYED_STATUS if they |
| * wish to delay the data/status stages of the control transfer till they |
| * are ready. The control transfer will then be kept from completing till |
| * all the function drivers that requested for USB_GADGET_DELAYED_STAUS |
| * invoke usb_composite_setup_continue(). |
| */ |
| #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ |
| |
| /* big enough to hold our biggest descriptor */ |
| #define USB_COMP_EP0_BUFSIZ 4096 |
| |
| /* OS feature descriptor length <= 4kB */ |
| #define USB_COMP_EP0_OS_DESC_BUFSIZ 4096 |
| |
| #define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1) |
| struct usb_configuration; |
| |
| /** |
| * struct usb_os_desc_ext_prop - describes one "Extended Property" |
| * @entry: used to keep a list of extended properties |
| * @type: Extended Property type |
| * @name_len: Extended Property unicode name length, including terminating '\0' |
| * @name: Extended Property name |
| * @data_len: Length of Extended Property blob (for unicode store double len) |
| * @data: Extended Property blob |
| * @item: Represents this Extended Property in configfs |
| */ |
| struct usb_os_desc_ext_prop { |
| struct list_head entry; |
| u8 type; |
| int name_len; |
| char *name; |
| int data_len; |
| char *data; |
| struct config_item item; |
| }; |
| |
| /** |
| * struct usb_os_desc - describes OS descriptors associated with one interface |
| * @ext_compat_id: 16 bytes of "Compatible ID" and "Subcompatible ID" |
| * @ext_prop: Extended Properties list |
| * @ext_prop_len: Total length of Extended Properties blobs |
| * @ext_prop_count: Number of Extended Properties |
| * @opts_mutex: Optional mutex protecting config data of a usb_function_instance |
| * @group: Represents OS descriptors associated with an interface in configfs |
| * @owner: Module associated with this OS descriptor |
| */ |
| struct usb_os_desc { |
| char *ext_compat_id; |
| struct list_head ext_prop; |
| int ext_prop_len; |
| int ext_prop_count; |
| struct mutex *opts_mutex; |
| struct config_group group; |
| struct module *owner; |
| }; |
| |
| /** |
| * struct usb_os_desc_table - describes OS descriptors associated with one |
| * interface of a usb_function |
| * @if_id: Interface id |
| * @os_desc: "Extended Compatibility ID" and "Extended Properties" of the |
| * interface |
| * |
| * Each interface can have at most one "Extended Compatibility ID" and a |
| * number of "Extended Properties". |
| */ |
| struct usb_os_desc_table { |
| int if_id; |
| struct usb_os_desc *os_desc; |
| }; |
| |
| /** |
| * struct usb_function - describes one function of a configuration |
| * @name: For diagnostics, identifies the function. |
| * @strings: tables of strings, keyed by identifiers assigned during bind() |
| * and by language IDs provided in control requests |
| * @fs_descriptors: Table of full (or low) speed descriptors, using interface and |
| * string identifiers assigned during @bind(). If this pointer is null, |
| * the function will not be available at full speed (or at low speed). |
| * @hs_descriptors: Table of high speed descriptors, using interface and |
| * string identifiers assigned during @bind(). If this pointer is null, |
| * the function will not be available at high speed. |
| * @ss_descriptors: Table of super speed descriptors, using interface and |
| * string identifiers assigned during @bind(). If this |
| * pointer is null after initiation, the function will not |
| * be available at super speed. |
| * @ssp_descriptors: Table of super speed plus descriptors, using |
| * interface and string identifiers assigned during @bind(). If |
| * this pointer is null after initiation, the function will not |
| * be available at super speed plus. |
| * @config: assigned when @usb_add_function() is called; this is the |
| * configuration with which this function is associated. |
| * @os_desc_table: Table of (interface id, os descriptors) pairs. The function |
| * can expose more than one interface. If an interface is a member of |
| * an IAD, only the first interface of IAD has its entry in the table. |
| * @os_desc_n: Number of entries in os_desc_table |
| * @bind: Before the gadget can register, all of its functions bind() to the |
| * available resources including string and interface identifiers used |
| * in interface or class descriptors; endpoints; I/O buffers; and so on. |
| * @unbind: Reverses @bind; called as a side effect of unregistering the |
| * driver which added this function. |
| * @free_func: free the struct usb_function. |
| * @mod: (internal) points to the module that created this structure. |
| * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may |
| * initialize usb_ep.driver data at this time (when it is used). |
| * Note that setting an interface to its current altsetting resets |
| * interface state, and that all interfaces have a disabled state. |
| * @get_alt: Returns the active altsetting. If this is not provided, |
| * then only altsetting zero is supported. |
| * @disable: (REQUIRED) Indicates the function should be disabled. Reasons |
| * include host resetting or reconfiguring the gadget, and disconnection. |
| * @setup: Used for interface-specific control requests. |
| * @req_match: Tests if a given class request can be handled by this function. |
| * @suspend: Notifies functions when the host stops sending USB traffic. |
| * @resume: Notifies functions when the host restarts USB traffic. |
| * @get_status: Returns function status as a reply to |
| * GetStatus() request when the recipient is Interface. |
| * @func_suspend: callback to be called when |
| * SetFeature(FUNCTION_SUSPEND) is reseived |
| * |
| * A single USB function uses one or more interfaces, and should in most |
| * cases support operation at both full and high speeds. Each function is |
| * associated by @usb_add_function() with a one configuration; that function |
| * causes @bind() to be called so resources can be allocated as part of |
| * setting up a gadget driver. Those resources include endpoints, which |
| * should be allocated using @usb_ep_autoconfig(). |
| * |
| * To support dual speed operation, a function driver provides descriptors |
| * for both high and full speed operation. Except in rare cases that don't |
| * involve bulk endpoints, each speed needs different endpoint descriptors. |
| * |
| * Function drivers choose their own strategies for managing instance data. |
| * The simplest strategy just declares it "static', which means the function |
| * can only be activated once. If the function needs to be exposed in more |
| * than one configuration at a given speed, it needs to support multiple |
| * usb_function structures (one for each configuration). |
| * |
| * A more complex strategy might encapsulate a @usb_function structure inside |
| * a driver-specific instance structure to allows multiple activations. An |
| * example of multiple activations might be a CDC ACM function that supports |
| * two or more distinct instances within the same configuration, providing |
| * several independent logical data links to a USB host. |
| */ |
| |
| struct usb_function { |
| const char *name; |
| struct usb_gadget_strings **strings; |
| struct usb_descriptor_header **fs_descriptors; |
| struct usb_descriptor_header **hs_descriptors; |
| struct usb_descriptor_header **ss_descriptors; |
| struct usb_descriptor_header **ssp_descriptors; |
| |
| struct usb_configuration *config; |
| |
| struct usb_os_desc_table *os_desc_table; |
| unsigned os_desc_n; |
| |
| /* REVISIT: bind() functions can be marked __init, which |
| * makes trouble for section mismatch analysis. See if |
| * we can't restructure things to avoid mismatching. |
| * Related: unbind() may kfree() but bind() won't... |
| */ |
| |
| /* configuration management: bind/unbind */ |
| int (*bind)(struct usb_configuration *, |
| struct usb_function *); |
| void (*unbind)(struct usb_configuration *, |
| struct usb_function *); |
| void (*free_func)(struct usb_function *f); |
| struct module *mod; |
| |
| /* runtime state management */ |
| int (*set_alt)(struct usb_function *, |
| unsigned interface, unsigned alt); |
| int (*get_alt)(struct usb_function *, |
| unsigned interface); |
| void (*disable)(struct usb_function *); |
| int (*setup)(struct usb_function *, |
| const struct usb_ctrlrequest *); |
| bool (*req_match)(struct usb_function *, |
| const struct usb_ctrlrequest *, |
| bool config0); |
| void (*suspend)(struct usb_function *); |
| void (*resume)(struct usb_function *); |
| |
| /* USB 3.0 additions */ |
| int (*get_status)(struct usb_function *); |
| int (*func_suspend)(struct usb_function *, |
| u8 suspend_opt); |
| /* private: */ |
| /* internals */ |
| struct list_head list; |
| DECLARE_BITMAP(endpoints, 32); |
| const struct usb_function_instance *fi; |
| |
| unsigned int bind_deactivated:1; |
| }; |
| |
| int usb_add_function(struct usb_configuration *, struct usb_function *); |
| |
| int usb_function_deactivate(struct usb_function *); |
| int usb_function_activate(struct usb_function *); |
| |
| int usb_interface_id(struct usb_configuration *, struct usb_function *); |
| |
| int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f, |
| struct usb_ep *_ep, u8 alt); |
| |
| int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, |
| struct usb_ep *_ep); |
| |
| #define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ |
| |
| /** |
| * struct usb_configuration - represents one gadget configuration |
| * @label: For diagnostics, describes the configuration. |
| * @strings: Tables of strings, keyed by identifiers assigned during @bind() |
| * and by language IDs provided in control requests. |
| * @descriptors: Table of descriptors preceding all function descriptors. |
| * Examples include OTG and vendor-specific descriptors. |
| * @unbind: Reverses @bind; called as a side effect of unregistering the |
| * driver which added this configuration. |
| * @setup: Used to delegate control requests that aren't handled by standard |
| * device infrastructure or directed at a specific interface. |
| * @bConfigurationValue: Copied into configuration descriptor. |
| * @iConfiguration: Copied into configuration descriptor. |
| * @bmAttributes: Copied into configuration descriptor. |
| * @MaxPower: Power consumtion in mA. Used to compute bMaxPower in the |
| * configuration descriptor after considering the bus speed. |
| * @cdev: assigned by @usb_add_config() before calling @bind(); this is |
| * the device associated with this configuration. |
| * |
| * Configurations are building blocks for gadget drivers structured around |
| * function drivers. Simple USB gadgets require only one function and one |
| * configuration, and handle dual-speed hardware by always providing the same |
| * functionality. Slightly more complex gadgets may have more than one |
| * single-function configuration at a given speed; or have configurations |
| * that only work at one speed. |
| * |
| * Composite devices are, by definition, ones with configurations which |
| * include more than one function. |
| * |
| * The lifecycle of a usb_configuration includes allocation, initialization |
| * of the fields described above, and calling @usb_add_config() to set up |
| * internal data and bind it to a specific device. The configuration's |
| * @bind() method is then used to initialize all the functions and then |
| * call @usb_add_function() for them. |
| * |
| * Those functions would normally be independent of each other, but that's |
| * not mandatory. CDC WMC devices are an example where functions often |
| * depend on other functions, with some functions subsidiary to others. |
| * Such interdependency may be managed in any way, so long as all of the |
| * descriptors complete by the time the composite driver returns from |
| * its bind() routine. |
| */ |
| struct usb_configuration { |
| const char *label; |
| struct usb_gadget_strings **strings; |
| const struct usb_descriptor_header **descriptors; |
| |
| /* REVISIT: bind() functions can be marked __init, which |
| * makes trouble for section mismatch analysis. See if |
| * we can't restructure things to avoid mismatching... |
| */ |
| |
| /* configuration management: unbind/setup */ |
| void (*unbind)(struct usb_configuration *); |
| int (*setup)(struct usb_configuration *, |
| const struct usb_ctrlrequest *); |
| |
| /* fields in the config descriptor */ |
| u8 bConfigurationValue; |
| u8 iConfiguration; |
| u8 bmAttributes; |
| u16 MaxPower; |
| |
| struct usb_composite_dev *cdev; |
| |
| /* private: */ |
| /* internals */ |
| struct list_head list; |
| struct list_head functions; |
| u8 next_interface_id; |
| unsigned superspeed:1; |
| unsigned highspeed:1; |
| unsigned fullspeed:1; |
| unsigned superspeed_plus:1; |
| struct usb_function *interface[MAX_CONFIG_INTERFACES]; |
| }; |
| |
| int usb_add_config(struct usb_composite_dev *, |
| struct usb_configuration *, |
| int (*)(struct usb_configuration *)); |
| |
| void usb_remove_config(struct usb_composite_dev *, |
| struct usb_configuration *); |
| |
| /* predefined index for usb_composite_driver */ |
| enum { |
| USB_GADGET_MANUFACTURER_IDX = 0, |
| USB_GADGET_PRODUCT_IDX, |
| USB_GADGET_SERIAL_IDX, |
| USB_GADGET_FIRST_AVAIL_IDX, |
| }; |
| |
| /** |
| * struct usb_composite_driver - groups configurations into a gadget |
| * @name: For diagnostics, identifies the driver. |
| * @dev: Template descriptor for the device, including default device |
| * identifiers. |
| * @strings: tables of strings, keyed by identifiers assigned during @bind |
| * and language IDs provided in control requests. Note: The first entries |
| * are predefined. The first entry that may be used is |
| * USB_GADGET_FIRST_AVAIL_IDX |
| * @max_speed: Highest speed the driver supports. |
| * @needs_serial: set to 1 if the gadget needs userspace to provide |
| * a serial number. If one is not provided, warning will be printed. |
| * @bind: (REQUIRED) Used to allocate resources that are shared across the |
| * whole device, such as string IDs, and add its configurations using |
| * @usb_add_config(). This may fail by returning a negative errno |
| * value; it should return zero on successful initialization. |
| * @unbind: Reverses @bind; called as a side effect of unregistering |
| * this driver. |
| * @disconnect: optional driver disconnect method |
| * @suspend: Notifies when the host stops sending USB traffic, |
| * after function notifications |
| * @resume: Notifies configuration when the host restarts USB traffic, |
| * before function notifications |
| * @gadget_driver: Gadget driver controlling this driver |
| * |
| * Devices default to reporting self powered operation. Devices which rely |
| * on bus powered operation should report this in their @bind method. |
| * |
| * Before returning from @bind, various fields in the template descriptor |
| * may be overridden. These include the idVendor/idProduct/bcdDevice values |
| * normally to bind the appropriate host side driver, and the three strings |
| * (iManufacturer, iProduct, iSerialNumber) normally used to provide user |
| * meaningful device identifiers. (The strings will not be defined unless |
| * they are defined in @dev and @strings.) The correct ep0 maxpacket size |
| * is also reported, as defined by the underlying controller driver. |
| */ |
| struct usb_composite_driver { |
| const char *name; |
| const struct usb_device_descriptor *dev; |
| struct usb_gadget_strings **strings; |
| enum usb_device_speed max_speed; |
| unsigned needs_serial:1; |
| |
| int (*bind)(struct usb_composite_dev *cdev); |
| int (*unbind)(struct usb_composite_dev *); |
| |
| void (*disconnect)(struct usb_composite_dev *); |
| |
| /* global suspend hooks */ |
| void (*suspend)(struct usb_composite_dev *); |
| void (*resume)(struct usb_composite_dev *); |
| struct usb_gadget_driver gadget_driver; |
| }; |
| |
| extern int usb_composite_probe(struct usb_composite_driver *driver); |
| extern void usb_composite_unregister(struct usb_composite_driver *driver); |
| |
| /** |
| * module_usb_composite_driver() - Helper macro for registering a USB gadget |
| * composite driver |
| * @__usb_composite_driver: usb_composite_driver struct |
| * |
| * Helper macro for USB gadget composite drivers which do not do anything |
| * special in module init/exit. This eliminates a lot of boilerplate. Each |
| * module may only use this macro once, and calling it replaces module_init() |
| * and module_exit() |
| */ |
| #define module_usb_composite_driver(__usb_composite_driver) \ |
| module_driver(__usb_composite_driver, usb_composite_probe, \ |
| usb_composite_unregister) |
| |
| extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); |
| extern int composite_dev_prepare(struct usb_composite_driver *composite, |
| struct usb_composite_dev *cdev); |
| extern int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, |
| struct usb_ep *ep0); |
| void composite_dev_cleanup(struct usb_composite_dev *cdev); |
| |
| static inline struct usb_composite_driver *to_cdriver( |
| struct usb_gadget_driver *gdrv) |
| { |
| return container_of(gdrv, struct usb_composite_driver, gadget_driver); |
| } |
| |
| #define OS_STRING_QW_SIGN_LEN 14 |
| #define OS_STRING_IDX 0xEE |
| |
| /** |
| * struct usb_composite_dev - represents one composite usb gadget |
| * @gadget: read-only, abstracts the gadget's usb peripheral controller |
| * @req: used for control responses; buffer is pre-allocated |
| * @os_desc_req: used for OS descriptors responses; buffer is pre-allocated |
| * @config: the currently active configuration |
| * @qw_sign: qwSignature part of the OS string |
| * @b_vendor_code: bMS_VendorCode part of the OS string |
| * @use_os_string: false by default, interested gadgets set it |
| * @os_desc_config: the configuration to be used with OS descriptors |
| * @setup_pending: true when setup request is queued but not completed |
| * @os_desc_pending: true when os_desc request is queued but not completed |
| * |
| * One of these devices is allocated and initialized before the |
| * associated device driver's bind() is called. |
| * |
| * OPEN ISSUE: it appears that some WUSB devices will need to be |
| * built by combining a normal (wired) gadget with a wireless one. |
| * This revision of the gadget framework should probably try to make |
| * sure doing that won't hurt too much. |
| * |
| * One notion for how to handle Wireless USB devices involves: |
| * |
| * (a) a second gadget here, discovery mechanism TBD, but likely |
| * needing separate "register/unregister WUSB gadget" calls; |
| * (b) updates to usb_gadget to include flags "is it wireless", |
| * "is it wired", plus (presumably in a wrapper structure) |
| * bandgroup and PHY info; |
| * (c) presumably a wireless_ep wrapping a usb_ep, and reporting |
| * wireless-specific parameters like maxburst and maxsequence; |
| * (d) configurations that are specific to wireless links; |
| * (e) function drivers that understand wireless configs and will |
| * support wireless for (additional) function instances; |
| * (f) a function to support association setup (like CBAF), not |
| * necessarily requiring a wireless adapter; |
| * (g) composite device setup that can create one or more wireless |
| * configs, including appropriate association setup support; |
| * (h) more, TBD. |
| */ |
| struct usb_composite_dev { |
| struct usb_gadget *gadget; |
| struct usb_request *req; |
| struct usb_request *os_desc_req; |
| |
| struct usb_configuration *config; |
| |
| /* OS String is a custom (yet popular) extension to the USB standard. */ |
| u8 qw_sign[OS_STRING_QW_SIGN_LEN]; |
| u8 b_vendor_code; |
| struct usb_configuration *os_desc_config; |
| unsigned int use_os_string:1; |
| |
| /* private: */ |
| /* internals */ |
| unsigned int suspended:1; |
| struct usb_device_descriptor desc; |
| struct list_head configs; |
| struct list_head gstrings; |
| struct usb_composite_driver *driver; |
| u8 next_string_id; |
| char *def_manufacturer; |
| |
| /* the gadget driver won't enable the data pullup |
| * while the deactivation count is nonzero. |
| */ |
| unsigned deactivations; |
| |
| /* the composite driver won't complete the control transfer's |
| * data/status stages till delayed_status is zero. |
| */ |
| int delayed_status; |
| |
| /* protects deactivations and delayed_status counts*/ |
| spinlock_t lock; |
| |
| /* public: */ |
| unsigned int setup_pending:1; |
| unsigned int os_desc_pending:1; |
| }; |
| |
| extern int usb_string_id(struct usb_composite_dev *c); |
| extern int usb_string_ids_tab(struct usb_composite_dev *c, |
| struct usb_string *str); |
| extern struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev, |
| struct usb_gadget_strings **sp, unsigned n_strings); |
| |
| extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n); |
| |
| extern void composite_disconnect(struct usb_gadget *gadget); |
| extern void composite_reset(struct usb_gadget *gadget); |
| |
| extern int composite_setup(struct usb_gadget *gadget, |
| const struct usb_ctrlrequest *ctrl); |
| extern void composite_suspend(struct usb_gadget *gadget); |
| extern void composite_resume(struct usb_gadget *gadget); |
| |
| /* |
| * Some systems will need runtime overrides for the product identifiers |
| * published in the device descriptor, either numbers or strings or both. |
| * String parameters are in UTF-8 (superset of ASCII's 7 bit characters). |
| */ |
| struct usb_composite_overwrite { |
| u16 idVendor; |
| u16 idProduct; |
| u16 bcdDevice; |
| char *serial_number; |
| char *manufacturer; |
| char *product; |
| }; |
| #define USB_GADGET_COMPOSITE_OPTIONS() \ |
| static struct usb_composite_overwrite coverwrite; \ |
| \ |
| module_param_named(idVendor, coverwrite.idVendor, ushort, S_IRUGO); \ |
| MODULE_PARM_DESC(idVendor, "USB Vendor ID"); \ |
| \ |
| module_param_named(idProduct, coverwrite.idProduct, ushort, S_IRUGO); \ |
| MODULE_PARM_DESC(idProduct, "USB Product ID"); \ |
| \ |
| module_param_named(bcdDevice, coverwrite.bcdDevice, ushort, S_IRUGO); \ |
| MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); \ |
| \ |
| module_param_named(iSerialNumber, coverwrite.serial_number, charp, \ |
| S_IRUGO); \ |
| MODULE_PARM_DESC(iSerialNumber, "SerialNumber string"); \ |
| \ |
| module_param_named(iManufacturer, coverwrite.manufacturer, charp, \ |
| S_IRUGO); \ |
| MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); \ |
| \ |
| module_param_named(iProduct, coverwrite.product, charp, S_IRUGO); \ |
| MODULE_PARM_DESC(iProduct, "USB Product string") |
| |
| void usb_composite_overwrite_options(struct usb_composite_dev *cdev, |
| struct usb_composite_overwrite *covr); |
| |
| static inline u16 get_default_bcdDevice(void) |
| { |
| u16 bcdDevice; |
| |
| bcdDevice = bin2bcd(LINUX_VERSION_MAJOR) << 8; |
| bcdDevice |= bin2bcd(LINUX_VERSION_PATCHLEVEL); |
| return bcdDevice; |
| } |
| |
| struct usb_function_driver { |
| const char *name; |
| struct module *mod; |
| struct list_head list; |
| struct usb_function_instance *(*alloc_inst)(void); |
| struct usb_function *(*alloc_func)(struct usb_function_instance *inst); |
| }; |
| |
| struct usb_function_instance { |
| struct config_group group; |
| struct list_head cfs_list; |
| struct usb_function_driver *fd; |
| int (*set_inst_name)(struct usb_function_instance *inst, |
| const char *name); |
| void (*free_func_inst)(struct usb_function_instance *inst); |
| }; |
| |
| void usb_function_unregister(struct usb_function_driver *f); |
| int usb_function_register(struct usb_function_driver *newf); |
| void usb_put_function_instance(struct usb_function_instance *fi); |
| void usb_put_function(struct usb_function *f); |
| struct usb_function_instance *usb_get_function_instance(const char *name); |
| struct usb_function *usb_get_function(struct usb_function_instance *fi); |
| |
| struct usb_configuration *usb_get_config(struct usb_composite_dev *cdev, |
| int val); |
| int usb_add_config_only(struct usb_composite_dev *cdev, |
| struct usb_configuration *config); |
| void usb_remove_function(struct usb_configuration *c, struct usb_function *f); |
| |
| #define DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \ |
| static struct usb_function_driver _name ## usb_func = { \ |
| .name = __stringify(_name), \ |
| .mod = THIS_MODULE, \ |
| .alloc_inst = _inst_alloc, \ |
| .alloc_func = _func_alloc, \ |
| }; \ |
| MODULE_ALIAS("usbfunc:"__stringify(_name)); |
| |
| #define DECLARE_USB_FUNCTION_INIT(_name, _inst_alloc, _func_alloc) \ |
| DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \ |
| static int __init _name ## mod_init(void) \ |
| { \ |
| return usb_function_register(&_name ## usb_func); \ |
| } \ |
| static void __exit _name ## mod_exit(void) \ |
| { \ |
| usb_function_unregister(&_name ## usb_func); \ |
| } \ |
| module_init(_name ## mod_init); \ |
| module_exit(_name ## mod_exit) |
| |
| /* messaging utils */ |
| #define DBG(d, fmt, args...) \ |
| dev_dbg(&(d)->gadget->dev , fmt , ## args) |
| #define VDBG(d, fmt, args...) \ |
| dev_vdbg(&(d)->gadget->dev , fmt , ## args) |
| #define ERROR(d, fmt, args...) \ |
| dev_err(&(d)->gadget->dev , fmt , ## args) |
| #define WARNING(d, fmt, args...) \ |
| dev_warn(&(d)->gadget->dev , fmt , ## args) |
| #define INFO(d, fmt, args...) \ |
| dev_info(&(d)->gadget->dev , fmt , ## args) |
| |
| #endif /* __LINUX_USB_COMPOSITE_H */ |