Documentation/trace/stm.rst - linux - Git at Google

 .. SPDX-License-Identifier: GPL-2.0

 ===================
 System Trace Module
 ===================

 System Trace Module (STM) is a device described in MIPI STP specs as
 STP trace stream generator. STP (System Trace Protocol) is a trace
 protocol multiplexing data from multiple trace sources, each one of
 which is assigned a unique pair of master and channel. While some of
 these masters and channels are statically allocated to certain
 hardware trace sources, others are available to software. Software
 trace sources are usually free to pick for themselves any
 master/channel combination from this pool.

 On the receiving end of this STP stream (the decoder side), trace
 sources can only be identified by master/channel combination, so in
 order for the decoder to be able to make sense of the trace that
 involves multiple trace sources, it needs to be able to map those
 master/channel pairs to the trace sources that it understands.

 For instance, it is helpful to know that syslog messages come on
 master 7 channel 15, while arbitrary user applications can use masters
 48 to 63 and channels 0 to 127.

 To solve this mapping problem, stm class provides a policy management
 mechanism via configfs, that allows defining rules that map string
 identifiers to ranges of masters and channels. If these rules (policy)
 are consistent with what decoder expects, it will be able to properly
 process the trace data.

 This policy is a tree structure containing rules (policy_node) that
 have a name (string identifier) and a range of masters and channels
 associated with it, located in "stp-policy" subsystem directory in
 configfs. The topmost directory's name (the policy) is formatted as
 the STM device name to which this policy applies and and arbitrary
 string identifier separated by a stop. From the examle above, a rule
 may look like this::

 	$ ls /config/stp-policy/dummy_stm.my-policy/user
 	channels masters
 	$ cat /config/stp-policy/dummy_stm.my-policy/user/masters
 	48 63
 	$ cat /config/stp-policy/dummy_stm.my-policy/user/channels
 	0 127

 which means that the master allocation pool for this rule consists of
 masters 48 through 63 and channel allocation pool has channels 0
 through 127 in it. Now, any producer (trace source) identifying itself
 with "user" identification string will be allocated a master and
 channel from within these ranges.

 These rules can be nested, for example, one can define a rule "dummy"
 under "user" directory from the example above and this new rule will
 be used for trace sources with the id string of "user/dummy".

 Trace sources have to open the stm class device's node and write their
 trace data into its file descriptor.

 In order to find an appropriate policy node for a given trace source,
 several mechanisms can be used. First, a trace source can explicitly
 identify itself by calling an STP_POLICY_ID_SET ioctl on the character
 device's file descriptor, providing their id string, before they write
 any data there. Secondly, if they chose not to perform the explicit
 identification (because you may not want to patch existing software
 to do this), they can just start writing the data, at which point the
 stm core will try to find a policy node with the name matching the
 task's name (e.g., "syslogd") and if one exists, it will be used.
 Thirdly, if the task name can't be found among the policy nodes, the
 catch-all entry "default" will be used, if it exists. This entry also
 needs to be created and configured by the system administrator or
 whatever tools are taking care of the policy configuration. Finally,
 if all the above steps failed, the write() to an stm file descriptor
 will return a error (EINVAL).

 Previously, if no policy nodes were found for a trace source, the stm
 class would silently fall back to allocating the first available
 contiguous range of master/channels from the beginning of the device's
 master/channel range. The new requirement for a policy node to exist
 will help programmers and sysadmins identify gaps in configuration
 and have better control over the un-identified sources.

 Some STM devices may allow direct mapping of the channel mmio regions
 to userspace for zero-copy writing. One mappable page (in terms of
 mmu) will usually contain multiple channels' mmios, so the user will
 need to allocate that many channels to themselves (via the
 aforementioned ioctl() call) to be able to do this. That is, if your
 stm device's channel mmio region is 64 bytes and hardware page size is
 4096 bytes, after a successful STP_POLICY_ID_SET ioctl() call with
 width==64, you should be able to mmap() one page on this file
 descriptor and obtain direct access to an mmio region for 64 channels.

 Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
 [2].

 stm_source
 ==========

 For kernel-based trace sources, there is "stm_source" device
 class. Devices of this class can be connected and disconnected to/from
 stm devices at runtime via a sysfs attribute called "stm_source_link"
 by writing the name of the desired stm device there, for example::

 	$ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link

 For examples on how to use stm_source interface in the kernel, refer
 to stm_console, stm_heartbeat or stm_ftrace drivers.

 Each stm_source device will need to assume a master and a range of
 channels, depending on how many channels it requires. These are
 allocated for the device according to the policy configuration. If
 there's a node in the root of the policy directory that matches the
 stm_source device's name (for example, "console"), this node will be
 used to allocate master and channel numbers. If there's no such policy
 node, the stm core will use the catch-all entry "default", if one
 exists. If neither policy nodes exist, the write() to stm_source_link
 will return an error.

 stm_console
 ===========

 One implementation of this interface also used in the example above is
 the "stm_console" driver, which basically provides a one-way console
 for kernel messages over an stm device.

 To configure the master/channel pair that will be assigned to this
 console in the STP stream, create a "console" policy entry (see the
 beginning of this text on how to do that). When initialized, it will
 consume one channel.

 stm_ftrace
 ==========

 This is another "stm_source" device, once the stm_ftrace has been
 linked with an stm device, and if "function" tracer is enabled,
 function address and parent function address which Ftrace subsystem
 would store into ring buffer will be exported via the stm device at
 the same time.

 Currently only Ftrace "function" tracer is supported.

 * [1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
 * [2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html
	.. SPDX-License-Identifier: GPL-2.0

	===================
	System Trace Module
	===================

	System Trace Module (STM) is a device described in MIPI STP specs as
	STP trace stream generator. STP (System Trace Protocol) is a trace
	protocol multiplexing data from multiple trace sources, each one of
	which is assigned a unique pair of master and channel. While some of
	these masters and channels are statically allocated to certain
	hardware trace sources, others are available to software. Software
	trace sources are usually free to pick for themselves any
	master/channel combination from this pool.

	On the receiving end of this STP stream (the decoder side), trace
	sources can only be identified by master/channel combination, so in
	order for the decoder to be able to make sense of the trace that
	involves multiple trace sources, it needs to be able to map those
	master/channel pairs to the trace sources that it understands.

	For instance, it is helpful to know that syslog messages come on
	master 7 channel 15, while arbitrary user applications can use masters
	48 to 63 and channels 0 to 127.

	To solve this mapping problem, stm class provides a policy management
	mechanism via configfs, that allows defining rules that map string
	identifiers to ranges of masters and channels. If these rules (policy)
	are consistent with what decoder expects, it will be able to properly
	process the trace data.

	This policy is a tree structure containing rules (policy_node) that
	have a name (string identifier) and a range of masters and channels
	associated with it, located in "stp-policy" subsystem directory in
	configfs. The topmost directory's name (the policy) is formatted as
	the STM device name to which this policy applies and and arbitrary
	string identifier separated by a stop. From the examle above, a rule
	may look like this::

	$ ls /config/stp-policy/dummy_stm.my-policy/user
	channels masters
	$ cat /config/stp-policy/dummy_stm.my-policy/user/masters
	48 63
	$ cat /config/stp-policy/dummy_stm.my-policy/user/channels
	0 127

	which means that the master allocation pool for this rule consists of
	masters 48 through 63 and channel allocation pool has channels 0
	through 127 in it. Now, any producer (trace source) identifying itself
	with "user" identification string will be allocated a master and
	channel from within these ranges.

	These rules can be nested, for example, one can define a rule "dummy"
	under "user" directory from the example above and this new rule will
	be used for trace sources with the id string of "user/dummy".

	Trace sources have to open the stm class device's node and write their
	trace data into its file descriptor.

	In order to find an appropriate policy node for a given trace source,
	several mechanisms can be used. First, a trace source can explicitly
	identify itself by calling an STP_POLICY_ID_SET ioctl on the character
	device's file descriptor, providing their id string, before they write
	any data there. Secondly, if they chose not to perform the explicit
	identification (because you may not want to patch existing software
	to do this), they can just start writing the data, at which point the
	stm core will try to find a policy node with the name matching the
	task's name (e.g., "syslogd") and if one exists, it will be used.
	Thirdly, if the task name can't be found among the policy nodes, the
	catch-all entry "default" will be used, if it exists. This entry also
	needs to be created and configured by the system administrator or
	whatever tools are taking care of the policy configuration. Finally,
	if all the above steps failed, the write() to an stm file descriptor
	will return a error (EINVAL).

	Previously, if no policy nodes were found for a trace source, the stm
	class would silently fall back to allocating the first available
	contiguous range of master/channels from the beginning of the device's
	master/channel range. The new requirement for a policy node to exist
	will help programmers and sysadmins identify gaps in configuration
	and have better control over the un-identified sources.

	Some STM devices may allow direct mapping of the channel mmio regions
	to userspace for zero-copy writing. One mappable page (in terms of
	mmu) will usually contain multiple channels' mmios, so the user will
	need to allocate that many channels to themselves (via the
	aforementioned ioctl() call) to be able to do this. That is, if your
	stm device's channel mmio region is 64 bytes and hardware page size is
	4096 bytes, after a successful STP_POLICY_ID_SET ioctl() call with
	width==64, you should be able to mmap() one page on this file
	descriptor and obtain direct access to an mmio region for 64 channels.

	Examples of STM devices are Intel(R) Trace Hub [1] and Coresight STM
	[2].

	stm_source
	==========

	For kernel-based trace sources, there is "stm_source" device
	class. Devices of this class can be connected and disconnected to/from
	stm devices at runtime via a sysfs attribute called "stm_source_link"
	by writing the name of the desired stm device there, for example::

	$ echo dummy_stm.0 > /sys/class/stm_source/console/stm_source_link

	For examples on how to use stm_source interface in the kernel, refer
	to stm_console, stm_heartbeat or stm_ftrace drivers.

	Each stm_source device will need to assume a master and a range of
	channels, depending on how many channels it requires. These are
	allocated for the device according to the policy configuration. If
	there's a node in the root of the policy directory that matches the
	stm_source device's name (for example, "console"), this node will be
	used to allocate master and channel numbers. If there's no such policy
	node, the stm core will use the catch-all entry "default", if one
	exists. If neither policy nodes exist, the write() to stm_source_link
	will return an error.

	stm_console
	===========

	One implementation of this interface also used in the example above is
	the "stm_console" driver, which basically provides a one-way console
	for kernel messages over an stm device.

	To configure the master/channel pair that will be assigned to this
	console in the STP stream, create a "console" policy entry (see the
	beginning of this text on how to do that). When initialized, it will
	consume one channel.

	stm_ftrace
	==========

	This is another "stm_source" device, once the stm_ftrace has been
	linked with an stm device, and if "function" tracer is enabled,
	function address and parent function address which Ftrace subsystem
	would store into ring buffer will be exported via the stm device at
	the same time.

	Currently only Ftrace "function" tracer is supported.

	* [1] https://software.intel.com/sites/default/files/managed/d3/3c/intel-th-developer-manual.pdf
	* [2] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0444b/index.html