# SPDX-License-Identifier: GPL-2.0-only
#
# Phy drivers for Qualcomm and Atheros platforms
#
config PHY_ATH79_USB
	tristate "Atheros AR71XX/9XXX USB PHY driver"
	depends on OF && (ATH79 || COMPILE_TEST)
	default y if USB_EHCI_HCD_PLATFORM || USB_OHCI_HCD_PLATFORM
	select RESET_CONTROLLER
	select GENERIC_PHY
	help
	  Enable this to support the USB PHY on Atheros AR71XX/9XXX SoCs.

config PHY_QCOM_APQ8064_SATA
	tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
	depends on ARCH_QCOM
	depends on HAS_IOMEM
	depends on OF
	select GENERIC_PHY

config PHY_QCOM_IPQ4019_USB
	tristate "Qualcomm IPQ4019 USB PHY driver"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.

config PHY_QCOM_IPQ806X_SATA
	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
	depends on ARCH_QCOM
	depends on HAS_IOMEM
	depends on OF
	select GENERIC_PHY

config PHY_QCOM_PCIE2
	tristate "Qualcomm PCIe Gen2 PHY Driver"
	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
	  based PCIe controller.

config PHY_QCOM_QMP
	tristate "Qualcomm QMP PHY Driver"
	depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Enable this to support the QMP PHY transceiver that is used
	  with controllers such as PCIe, UFS, and USB on Qualcomm chips.

config PHY_QCOM_QUSB2
	tristate "Qualcomm QUSB2 PHY Driver"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	depends on NVMEM || !NVMEM
	select GENERIC_PHY
	help
	  Enable this to support the HighSpeed QUSB2 PHY transceiver for USB
	  controllers on Qualcomm chips. This driver supports the high-speed
	  PHY which is usually paired with either the ChipIdea or Synopsys DWC3
	  USB IPs on MSM SOCs.

config PHY_QCOM_USB_HS
	tristate "Qualcomm USB HS PHY module"
	depends on USB_ULPI_BUS
	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
	select GENERIC_PHY
	help
	  Support for the USB high-speed ULPI compliant phy on Qualcomm
	  chipsets.

config PHY_QCOM_USB_SNPS_FEMTO_V2
	tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module"
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  Enable support for the USB high-speed SNPS Femto phy on Qualcomm
	  chipsets.  This PHY has differences in the register map compared
	  to the V1 variants.  The PHY is paired with a Synopsys DWC3 USB
	  controller on Qualcomm SOCs.

config PHY_QCOM_USB_HSIC
	tristate "Qualcomm USB HSIC ULPI PHY module"
	depends on USB_ULPI_BUS
	select GENERIC_PHY
	help
	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.

config PHY_QCOM_USB_HS_28NM
	tristate "Qualcomm 28nm High-Speed PHY"
	depends on ARCH_QCOM || COMPILE_TEST
	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
	select GENERIC_PHY
	help
	  Enable this to support the Qualcomm Synopsys DesignWare Core 28nm
	  High-Speed PHY driver. This driver supports the Hi-Speed PHY which
	  is usually paired with either the ChipIdea or Synopsys DWC3 USB
	  IPs on MSM SOCs.

config PHY_QCOM_USB_SS
	tristate "Qualcomm USB Super-Speed PHY driver"
	depends on ARCH_QCOM || COMPILE_TEST
	depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in
	select GENERIC_PHY
	help
	  Enable this to support the Super-Speed USB transceiver on various
	  Qualcomm chipsets.

config PHY_QCOM_IPQ806X_USB
	tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
	depends on HAS_IOMEM
	depends on OF && (ARCH_QCOM || COMPILE_TEST)
	select GENERIC_PHY
	help
	  This option enables support for the Synopsis PHYs present inside the
	  Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
	  both HS and SS PHY controllers.