| // SPDX-License-Identifier: GPL-2.0 |
| // TI LM3532 LED driver |
| // Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ |
| // https://www.ti.com/lit/ds/symlink/lm3532.pdf |
| |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/module.h> |
| #include <uapi/linux/uleds.h> |
| #include <linux/gpio/consumer.h> |
| |
| #define LM3532_NAME "lm3532-led" |
| #define LM3532_BL_MODE_MANUAL 0x00 |
| #define LM3532_BL_MODE_ALS 0x01 |
| |
| #define LM3532_REG_OUTPUT_CFG 0x10 |
| #define LM3532_REG_STARTSHUT_RAMP 0x11 |
| #define LM3532_REG_RT_RAMP 0x12 |
| #define LM3532_REG_PWM_A_CFG 0x13 |
| #define LM3532_REG_PWM_B_CFG 0x14 |
| #define LM3532_REG_PWM_C_CFG 0x15 |
| #define LM3532_REG_ZONE_CFG_A 0x16 |
| #define LM3532_REG_CTRL_A_FS_CURR 0x17 |
| #define LM3532_REG_ZONE_CFG_B 0x18 |
| #define LM3532_REG_CTRL_B_FS_CURR 0x19 |
| #define LM3532_REG_ZONE_CFG_C 0x1a |
| #define LM3532_REG_CTRL_C_FS_CURR 0x1b |
| #define LM3532_REG_ENABLE 0x1d |
| #define LM3532_ALS_CONFIG 0x23 |
| #define LM3532_REG_ZN_0_HI 0x60 |
| #define LM3532_REG_ZN_0_LO 0x61 |
| #define LM3532_REG_ZN_1_HI 0x62 |
| #define LM3532_REG_ZN_1_LO 0x63 |
| #define LM3532_REG_ZN_2_HI 0x64 |
| #define LM3532_REG_ZN_2_LO 0x65 |
| #define LM3532_REG_ZN_3_HI 0x66 |
| #define LM3532_REG_ZN_3_LO 0x67 |
| #define LM3532_REG_ZONE_TRGT_A 0x70 |
| #define LM3532_REG_ZONE_TRGT_B 0x75 |
| #define LM3532_REG_ZONE_TRGT_C 0x7a |
| #define LM3532_REG_MAX 0x7e |
| |
| /* Control Enable */ |
| #define LM3532_CTRL_A_ENABLE BIT(0) |
| #define LM3532_CTRL_B_ENABLE BIT(1) |
| #define LM3532_CTRL_C_ENABLE BIT(2) |
| |
| /* PWM Zone Control */ |
| #define LM3532_PWM_ZONE_MASK 0x7c |
| #define LM3532_PWM_ZONE_0_EN BIT(2) |
| #define LM3532_PWM_ZONE_1_EN BIT(3) |
| #define LM3532_PWM_ZONE_2_EN BIT(4) |
| #define LM3532_PWM_ZONE_3_EN BIT(5) |
| #define LM3532_PWM_ZONE_4_EN BIT(6) |
| |
| /* Brightness Configuration */ |
| #define LM3532_I2C_CTRL BIT(0) |
| #define LM3532_ALS_CTRL 0 |
| #define LM3532_LINEAR_MAP BIT(1) |
| #define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4)) |
| #define LM3532_ZONE_0 0 |
| #define LM3532_ZONE_1 BIT(2) |
| #define LM3532_ZONE_2 BIT(3) |
| #define LM3532_ZONE_3 (BIT(2) | BIT(3)) |
| #define LM3532_ZONE_4 BIT(4) |
| |
| #define LM3532_ENABLE_ALS BIT(3) |
| #define LM3532_ALS_SEL_SHIFT 6 |
| |
| /* Zone Boundary Register */ |
| #define LM3532_ALS_WINDOW_mV 2000 |
| #define LM3532_ALS_ZB_MAX 4 |
| #define LM3532_ALS_OFFSET_mV 2 |
| |
| #define LM3532_CONTROL_A 0 |
| #define LM3532_CONTROL_B 1 |
| #define LM3532_CONTROL_C 2 |
| #define LM3532_MAX_CONTROL_BANKS 3 |
| #define LM3532_MAX_LED_STRINGS 3 |
| |
| #define LM3532_OUTPUT_CFG_MASK 0x3 |
| #define LM3532_BRT_VAL_ADJUST 8 |
| #define LM3532_RAMP_DOWN_SHIFT 3 |
| |
| #define LM3532_NUM_RAMP_VALS 8 |
| #define LM3532_NUM_AVG_VALS 8 |
| #define LM3532_NUM_IMP_VALS 32 |
| |
| #define LM3532_FS_CURR_MIN 5000 |
| #define LM3532_FS_CURR_MAX 29800 |
| #define LM3532_FS_CURR_STEP 800 |
| |
| /* |
| * struct lm3532_als_data |
| * @config - value of ALS configuration register |
| * @als1_imp_sel - value of ALS1 resistor select register |
| * @als2_imp_sel - value of ALS2 resistor select register |
| * @als_avrg_time - ALS averaging time |
| * @als_input_mode - ALS input mode for brightness control |
| * @als_vmin - Minimum ALS voltage |
| * @als_vmax - Maximum ALS voltage |
| * @zone_lo - values of ALS lo ZB(Zone Boundary) registers |
| * @zone_hi - values of ALS hi ZB(Zone Boundary) registers |
| */ |
| struct lm3532_als_data { |
| u8 config; |
| u8 als1_imp_sel; |
| u8 als2_imp_sel; |
| u8 als_avrg_time; |
| u8 als_input_mode; |
| u32 als_vmin; |
| u32 als_vmax; |
| u8 zones_lo[LM3532_ALS_ZB_MAX]; |
| u8 zones_hi[LM3532_ALS_ZB_MAX]; |
| }; |
| |
| /** |
| * struct lm3532_led |
| * @led_dev: led class device |
| * @priv - Pointer the device data structure |
| * @control_bank - Control bank the LED is associated to |
| * @mode - Mode of the LED string |
| * @ctrl_brt_pointer - Zone target register that controls the sink |
| * @num_leds - Number of LED strings are supported in this array |
| * @full_scale_current - The full-scale current setting for the current sink. |
| * @led_strings - The LED strings supported in this array |
| * @enabled - Enabled status |
| * @label - LED label |
| */ |
| struct lm3532_led { |
| struct led_classdev led_dev; |
| struct lm3532_data *priv; |
| |
| int control_bank; |
| int mode; |
| int ctrl_brt_pointer; |
| int num_leds; |
| int full_scale_current; |
| unsigned int enabled:1; |
| u32 led_strings[LM3532_MAX_CONTROL_BANKS]; |
| char label[LED_MAX_NAME_SIZE]; |
| }; |
| |
| /** |
| * struct lm3532_data |
| * @enable_gpio - Hardware enable gpio |
| * @regulator: regulator |
| * @client: i2c client |
| * @regmap - Devices register map |
| * @dev - Pointer to the devices device struct |
| * @lock - Lock for reading/writing the device |
| * @als_data - Pointer to the als data struct |
| * @runtime_ramp_up - Runtime ramp up setting |
| * @runtime_ramp_down - Runtime ramp down setting |
| * @leds - Array of LED strings |
| */ |
| struct lm3532_data { |
| struct gpio_desc *enable_gpio; |
| struct regulator *regulator; |
| struct i2c_client *client; |
| struct regmap *regmap; |
| struct device *dev; |
| struct mutex lock; |
| |
| struct lm3532_als_data *als_data; |
| |
| u32 runtime_ramp_up; |
| u32 runtime_ramp_down; |
| |
| struct lm3532_led leds[]; |
| }; |
| |
| static const struct reg_default lm3532_reg_defs[] = { |
| {LM3532_REG_OUTPUT_CFG, 0xe4}, |
| {LM3532_REG_STARTSHUT_RAMP, 0xc0}, |
| {LM3532_REG_RT_RAMP, 0xc0}, |
| {LM3532_REG_PWM_A_CFG, 0x82}, |
| {LM3532_REG_PWM_B_CFG, 0x82}, |
| {LM3532_REG_PWM_C_CFG, 0x82}, |
| {LM3532_REG_ZONE_CFG_A, 0xf1}, |
| {LM3532_REG_CTRL_A_FS_CURR, 0xf3}, |
| {LM3532_REG_ZONE_CFG_B, 0xf1}, |
| {LM3532_REG_CTRL_B_FS_CURR, 0xf3}, |
| {LM3532_REG_ZONE_CFG_C, 0xf1}, |
| {LM3532_REG_CTRL_C_FS_CURR, 0xf3}, |
| {LM3532_REG_ENABLE, 0xf8}, |
| {LM3532_ALS_CONFIG, 0x44}, |
| {LM3532_REG_ZN_0_HI, 0x35}, |
| {LM3532_REG_ZN_0_LO, 0x33}, |
| {LM3532_REG_ZN_1_HI, 0x6a}, |
| {LM3532_REG_ZN_1_LO, 0x66}, |
| {LM3532_REG_ZN_2_HI, 0xa1}, |
| {LM3532_REG_ZN_2_LO, 0x99}, |
| {LM3532_REG_ZN_3_HI, 0xdc}, |
| {LM3532_REG_ZN_3_LO, 0xcc}, |
| }; |
| |
| static const struct regmap_config lm3532_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = LM3532_REG_MAX, |
| .reg_defaults = lm3532_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs), |
| .cache_type = REGCACHE_FLAT, |
| }; |
| |
| static const int als_imp_table[LM3532_NUM_IMP_VALS] = {37000, 18500, 12330, |
| 92500, 7400, 6170, 5290, |
| 4630, 4110, 3700, 3360, |
| 3080, 2850, 2640, 2440, |
| 2310, 2180, 2060, 1950, |
| 1850, 1760, 1680, 1610, |
| 1540, 1480, 1420, 1370, |
| 1320, 1280, 1230, 1190}; |
| static int lm3532_get_als_imp_index(int als_imped) |
| { |
| int i; |
| |
| if (als_imped > als_imp_table[1]) |
| return 0; |
| |
| if (als_imped < als_imp_table[LM3532_NUM_IMP_VALS - 1]) |
| return LM3532_NUM_IMP_VALS - 1; |
| |
| for (i = 1; i < LM3532_NUM_IMP_VALS; i++) { |
| if (als_imped == als_imp_table[i]) |
| return i; |
| |
| /* Find an approximate index by looking up the table */ |
| if (als_imped < als_imp_table[i - 1] && |
| als_imped > als_imp_table[i]) { |
| if (als_imped - als_imp_table[i - 1] < |
| als_imp_table[i] - als_imped) |
| return i + 1; |
| else |
| return i; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int lm3532_get_index(const int table[], int size, int value) |
| { |
| int i; |
| |
| for (i = 1; i < size; i++) { |
| if (value == table[i]) |
| return i; |
| |
| /* Find an approximate index by looking up the table */ |
| if (value > table[i - 1] && |
| value < table[i]) { |
| if (value - table[i - 1] < table[i] - value) |
| return i - 1; |
| else |
| return i; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static const int als_avrg_table[LM3532_NUM_AVG_VALS] = {17920, 35840, 71680, |
| 1433360, 286720, 573440, |
| 1146880, 2293760}; |
| static int lm3532_get_als_avg_index(int avg_time) |
| { |
| if (avg_time <= als_avrg_table[0]) |
| return 0; |
| |
| if (avg_time > als_avrg_table[LM3532_NUM_AVG_VALS - 1]) |
| return LM3532_NUM_AVG_VALS - 1; |
| |
| return lm3532_get_index(&als_avrg_table[0], LM3532_NUM_AVG_VALS, |
| avg_time); |
| } |
| |
| static const int ramp_table[LM3532_NUM_RAMP_VALS] = { 8, 1024, 2048, 4096, 8192, |
| 16384, 32768, 65536}; |
| static int lm3532_get_ramp_index(int ramp_time) |
| { |
| if (ramp_time <= ramp_table[0]) |
| return 0; |
| |
| if (ramp_time > ramp_table[LM3532_NUM_RAMP_VALS - 1]) |
| return LM3532_NUM_RAMP_VALS - 1; |
| |
| return lm3532_get_index(&ramp_table[0], LM3532_NUM_RAMP_VALS, |
| ramp_time); |
| } |
| |
| /* Caller must take care of locking */ |
| static int lm3532_led_enable(struct lm3532_led *led_data) |
| { |
| int ctrl_en_val = BIT(led_data->control_bank); |
| int ret; |
| |
| if (led_data->enabled) |
| return 0; |
| |
| ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, |
| ctrl_en_val, ctrl_en_val); |
| if (ret) { |
| dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_enable(led_data->priv->regulator); |
| if (ret < 0) |
| return ret; |
| |
| led_data->enabled = 1; |
| |
| return 0; |
| } |
| |
| /* Caller must take care of locking */ |
| static int lm3532_led_disable(struct lm3532_led *led_data) |
| { |
| int ctrl_en_val = BIT(led_data->control_bank); |
| int ret; |
| |
| if (!led_data->enabled) |
| return 0; |
| |
| ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, |
| ctrl_en_val, 0); |
| if (ret) { |
| dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); |
| return ret; |
| } |
| |
| ret = regulator_disable(led_data->priv->regulator); |
| if (ret < 0) |
| return ret; |
| |
| led_data->enabled = 0; |
| |
| return 0; |
| } |
| |
| static int lm3532_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness brt_val) |
| { |
| struct lm3532_led *led = |
| container_of(led_cdev, struct lm3532_led, led_dev); |
| u8 brightness_reg; |
| int ret; |
| |
| mutex_lock(&led->priv->lock); |
| |
| if (led->mode == LM3532_ALS_CTRL) { |
| if (brt_val > LED_OFF) |
| ret = lm3532_led_enable(led); |
| else |
| ret = lm3532_led_disable(led); |
| |
| goto unlock; |
| } |
| |
| if (brt_val == LED_OFF) { |
| ret = lm3532_led_disable(led); |
| goto unlock; |
| } |
| |
| ret = lm3532_led_enable(led); |
| if (ret) |
| goto unlock; |
| |
| brightness_reg = LM3532_REG_ZONE_TRGT_A + led->control_bank * 5 + |
| (led->ctrl_brt_pointer >> 2); |
| |
| ret = regmap_write(led->priv->regmap, brightness_reg, brt_val); |
| |
| unlock: |
| mutex_unlock(&led->priv->lock); |
| return ret; |
| } |
| |
| static int lm3532_init_registers(struct lm3532_led *led) |
| { |
| struct lm3532_data *drvdata = led->priv; |
| unsigned int runtime_ramp_val; |
| unsigned int output_cfg_val = 0; |
| unsigned int output_cfg_shift = 0; |
| unsigned int output_cfg_mask = 0; |
| unsigned int brightness_config_reg; |
| unsigned int brightness_config_val; |
| int fs_current_reg; |
| int fs_current_val; |
| int ret, i; |
| |
| if (drvdata->enable_gpio) |
| gpiod_direction_output(drvdata->enable_gpio, 1); |
| |
| brightness_config_reg = LM3532_REG_ZONE_CFG_A + led->control_bank * 2; |
| /* |
| * This could be hard coded to the default value but the control |
| * brightness register may have changed during boot. |
| */ |
| ret = regmap_read(drvdata->regmap, brightness_config_reg, |
| &led->ctrl_brt_pointer); |
| if (ret) |
| return ret; |
| |
| led->ctrl_brt_pointer &= LM3532_ZONE_MASK; |
| brightness_config_val = led->ctrl_brt_pointer | led->mode; |
| ret = regmap_write(drvdata->regmap, brightness_config_reg, |
| brightness_config_val); |
| if (ret) |
| return ret; |
| |
| if (led->full_scale_current) { |
| fs_current_reg = LM3532_REG_CTRL_A_FS_CURR + led->control_bank * 2; |
| fs_current_val = (led->full_scale_current - LM3532_FS_CURR_MIN) / |
| LM3532_FS_CURR_STEP; |
| |
| ret = regmap_write(drvdata->regmap, fs_current_reg, |
| fs_current_val); |
| if (ret) |
| return ret; |
| } |
| |
| for (i = 0; i < led->num_leds; i++) { |
| output_cfg_shift = led->led_strings[i] * 2; |
| output_cfg_val |= (led->control_bank << output_cfg_shift); |
| output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift; |
| } |
| |
| ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG, |
| output_cfg_mask, output_cfg_val); |
| if (ret) |
| return ret; |
| |
| runtime_ramp_val = drvdata->runtime_ramp_up | |
| (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT); |
| |
| return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP, |
| runtime_ramp_val); |
| } |
| |
| static int lm3532_als_configure(struct lm3532_data *priv, |
| struct lm3532_led *led) |
| { |
| struct lm3532_als_data *als = priv->als_data; |
| u32 als_vmin, als_vmax, als_vstep; |
| int zone_reg = LM3532_REG_ZN_0_HI; |
| int ret; |
| int i; |
| |
| als_vmin = als->als_vmin; |
| als_vmax = als->als_vmax; |
| |
| als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2); |
| |
| for (i = 0; i < LM3532_ALS_ZB_MAX; i++) { |
| als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) * |
| LED_FULL) / 1000; |
| als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV + |
| als_vstep + (i * als_vstep)) * LED_FULL) / 1000; |
| |
| zone_reg = LM3532_REG_ZN_0_HI + i * 2; |
| ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]); |
| if (ret) |
| return ret; |
| |
| zone_reg += 1; |
| ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]); |
| if (ret) |
| return ret; |
| } |
| |
| als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) | |
| (als->als_input_mode << LM3532_ALS_SEL_SHIFT)); |
| |
| return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config); |
| } |
| |
| static int lm3532_parse_als(struct lm3532_data *priv) |
| { |
| struct lm3532_als_data *als; |
| int als_avg_time; |
| int als_impedance; |
| int ret; |
| |
| als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL); |
| if (als == NULL) |
| return -ENOMEM; |
| |
| ret = device_property_read_u32(&priv->client->dev, "ti,als-vmin", |
| &als->als_vmin); |
| if (ret) |
| als->als_vmin = 0; |
| |
| ret = device_property_read_u32(&priv->client->dev, "ti,als-vmax", |
| &als->als_vmax); |
| if (ret) |
| als->als_vmax = LM3532_ALS_WINDOW_mV; |
| |
| if (als->als_vmax > LM3532_ALS_WINDOW_mV) { |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| ret = device_property_read_u32(&priv->client->dev, "ti,als1-imp-sel", |
| &als_impedance); |
| if (ret) |
| als->als1_imp_sel = 0; |
| else |
| als->als1_imp_sel = lm3532_get_als_imp_index(als_impedance); |
| |
| ret = device_property_read_u32(&priv->client->dev, "ti,als2-imp-sel", |
| &als_impedance); |
| if (ret) |
| als->als2_imp_sel = 0; |
| else |
| als->als2_imp_sel = lm3532_get_als_imp_index(als_impedance); |
| |
| ret = device_property_read_u32(&priv->client->dev, "ti,als-avrg-time-us", |
| &als_avg_time); |
| if (ret) |
| als->als_avrg_time = 0; |
| else |
| als->als_avrg_time = lm3532_get_als_avg_index(als_avg_time); |
| |
| ret = device_property_read_u8(&priv->client->dev, "ti,als-input-mode", |
| &als->als_input_mode); |
| if (ret) |
| als->als_input_mode = 0; |
| |
| if (als->als_input_mode > LM3532_BL_MODE_ALS) { |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| priv->als_data = als; |
| |
| return ret; |
| } |
| |
| static int lm3532_parse_node(struct lm3532_data *priv) |
| { |
| struct fwnode_handle *child = NULL; |
| struct lm3532_led *led; |
| const char *name; |
| int control_bank; |
| u32 ramp_time; |
| size_t i = 0; |
| int ret; |
| |
| priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, |
| "enable", GPIOD_OUT_LOW); |
| if (IS_ERR(priv->enable_gpio)) |
| priv->enable_gpio = NULL; |
| |
| priv->regulator = devm_regulator_get(&priv->client->dev, "vin"); |
| if (IS_ERR(priv->regulator)) |
| priv->regulator = NULL; |
| |
| ret = device_property_read_u32(&priv->client->dev, "ramp-up-us", |
| &ramp_time); |
| if (ret) |
| dev_info(&priv->client->dev, "ramp-up-ms property missing\n"); |
| else |
| priv->runtime_ramp_up = lm3532_get_ramp_index(ramp_time); |
| |
| ret = device_property_read_u32(&priv->client->dev, "ramp-down-us", |
| &ramp_time); |
| if (ret) |
| dev_info(&priv->client->dev, "ramp-down-ms property missing\n"); |
| else |
| priv->runtime_ramp_down = lm3532_get_ramp_index(ramp_time); |
| |
| device_for_each_child_node(priv->dev, child) { |
| struct led_init_data idata = { |
| .fwnode = child, |
| .default_label = ":", |
| .devicename = priv->client->name, |
| }; |
| |
| led = &priv->leds[i]; |
| |
| ret = fwnode_property_read_u32(child, "reg", &control_bank); |
| if (ret) { |
| dev_err(&priv->client->dev, "reg property missing\n"); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| if (control_bank > LM3532_CONTROL_C) { |
| dev_err(&priv->client->dev, "Control bank invalid\n"); |
| continue; |
| } |
| |
| led->control_bank = control_bank; |
| |
| ret = fwnode_property_read_u32(child, "ti,led-mode", |
| &led->mode); |
| if (ret) { |
| dev_err(&priv->client->dev, "ti,led-mode property missing\n"); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| if (fwnode_property_present(child, "led-max-microamp") && |
| fwnode_property_read_u32(child, "led-max-microamp", |
| &led->full_scale_current)) |
| dev_err(&priv->client->dev, |
| "Failed getting led-max-microamp\n"); |
| else |
| led->full_scale_current = min(led->full_scale_current, |
| LM3532_FS_CURR_MAX); |
| |
| if (led->mode == LM3532_BL_MODE_ALS) { |
| led->mode = LM3532_ALS_CTRL; |
| ret = lm3532_parse_als(priv); |
| if (ret) |
| dev_err(&priv->client->dev, "Failed to parse als\n"); |
| else |
| lm3532_als_configure(priv, led); |
| } else { |
| led->mode = LM3532_I2C_CTRL; |
| } |
| |
| led->num_leds = fwnode_property_count_u32(child, "led-sources"); |
| if (led->num_leds > LM3532_MAX_LED_STRINGS) { |
| dev_err(&priv->client->dev, "Too many LED string defined\n"); |
| continue; |
| } |
| |
| ret = fwnode_property_read_u32_array(child, "led-sources", |
| led->led_strings, |
| led->num_leds); |
| if (ret) { |
| dev_err(&priv->client->dev, "led-sources property missing\n"); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| fwnode_property_read_string(child, "linux,default-trigger", |
| &led->led_dev.default_trigger); |
| |
| ret = fwnode_property_read_string(child, "label", &name); |
| if (ret) |
| snprintf(led->label, sizeof(led->label), |
| "%s::", priv->client->name); |
| else |
| snprintf(led->label, sizeof(led->label), |
| "%s:%s", priv->client->name, name); |
| |
| led->priv = priv; |
| led->led_dev.name = led->label; |
| led->led_dev.brightness_set_blocking = lm3532_brightness_set; |
| |
| ret = devm_led_classdev_register_ext(priv->dev, &led->led_dev, &idata); |
| if (ret) { |
| dev_err(&priv->client->dev, "led register err: %d\n", |
| ret); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| ret = lm3532_init_registers(led); |
| if (ret) { |
| dev_err(&priv->client->dev, "register init err: %d\n", |
| ret); |
| fwnode_handle_put(child); |
| goto child_out; |
| } |
| |
| i++; |
| } |
| |
| child_out: |
| return ret; |
| } |
| |
| static int lm3532_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct lm3532_data *drvdata; |
| int ret = 0; |
| int count; |
| |
| count = device_get_child_node_count(&client->dev); |
| if (!count) { |
| dev_err(&client->dev, "LEDs are not defined in device tree!"); |
| return -ENODEV; |
| } |
| |
| drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count), |
| GFP_KERNEL); |
| if (drvdata == NULL) |
| return -ENOMEM; |
| |
| drvdata->client = client; |
| drvdata->dev = &client->dev; |
| |
| drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config); |
| if (IS_ERR(drvdata->regmap)) { |
| ret = PTR_ERR(drvdata->regmap); |
| dev_err(&client->dev, "Failed to allocate register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| mutex_init(&drvdata->lock); |
| i2c_set_clientdata(client, drvdata); |
| |
| ret = lm3532_parse_node(drvdata); |
| if (ret) { |
| dev_err(&client->dev, "Failed to parse node\n"); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int lm3532_remove(struct i2c_client *client) |
| { |
| struct lm3532_data *drvdata = i2c_get_clientdata(client); |
| |
| mutex_destroy(&drvdata->lock); |
| |
| if (drvdata->enable_gpio) |
| gpiod_direction_output(drvdata->enable_gpio, 0); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id of_lm3532_leds_match[] = { |
| { .compatible = "ti,lm3532", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_lm3532_leds_match); |
| |
| static const struct i2c_device_id lm3532_id[] = { |
| {LM3532_NAME, 0}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm3532_id); |
| |
| static struct i2c_driver lm3532_i2c_driver = { |
| .probe = lm3532_probe, |
| .remove = lm3532_remove, |
| .id_table = lm3532_id, |
| .driver = { |
| .name = LM3532_NAME, |
| .of_match_table = of_lm3532_leds_match, |
| }, |
| }; |
| module_i2c_driver(lm3532_i2c_driver); |
| |
| MODULE_DESCRIPTION("Back Light driver for LM3532"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |