| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Driver for TPS61050/61052 boost converters, typically used for white LEDs |
| * or audio amplifiers. |
| * |
| * Copyright (C) 2011 ST-Ericsson SA |
| * Written on behalf of Linaro for ST-Ericsson |
| * |
| * Author: Linus Walleij <linus.walleij@linaro.org> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/regmap.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/tps6105x.h> |
| |
| static const unsigned int tps6105x_voltages[] = { |
| 4500000, |
| 5000000, |
| 5250000, |
| 5000000, /* There is an additional 5V */ |
| }; |
| |
| static struct regulator_ops tps6105x_regulator_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_table, |
| }; |
| |
| static const struct regulator_desc tps6105x_regulator_desc = { |
| .name = "tps6105x-boost", |
| .of_match = of_match_ptr("regulator"), |
| .ops = &tps6105x_regulator_ops, |
| .type = REGULATOR_VOLTAGE, |
| .id = 0, |
| .owner = THIS_MODULE, |
| .n_voltages = ARRAY_SIZE(tps6105x_voltages), |
| .volt_table = tps6105x_voltages, |
| .vsel_reg = TPS6105X_REG_0, |
| .vsel_mask = TPS6105X_REG0_VOLTAGE_MASK, |
| .enable_reg = TPS6105X_REG_0, |
| .enable_mask = TPS6105X_REG0_MODE_MASK, |
| .enable_val = TPS6105X_REG0_MODE_VOLTAGE << |
| TPS6105X_REG0_MODE_SHIFT, |
| }; |
| |
| /* |
| * Registers the chip as a voltage regulator |
| */ |
| static int tps6105x_regulator_probe(struct platform_device *pdev) |
| { |
| struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev); |
| struct tps6105x_platform_data *pdata = tps6105x->pdata; |
| struct regulator_config config = { }; |
| int ret; |
| |
| /* This instance is not set for regulator mode so bail out */ |
| if (pdata->mode != TPS6105X_MODE_VOLTAGE) { |
| dev_info(&pdev->dev, |
| "chip not in voltage mode mode, exit probe\n"); |
| return 0; |
| } |
| |
| config.dev = &tps6105x->client->dev; |
| config.init_data = pdata->regulator_data; |
| config.driver_data = tps6105x; |
| config.of_node = pdev->dev.parent->of_node; |
| config.regmap = tps6105x->regmap; |
| |
| /* Register regulator with framework */ |
| tps6105x->regulator = devm_regulator_register(&pdev->dev, |
| &tps6105x_regulator_desc, |
| &config); |
| if (IS_ERR(tps6105x->regulator)) { |
| ret = PTR_ERR(tps6105x->regulator); |
| dev_err(&tps6105x->client->dev, |
| "failed to register regulator\n"); |
| return ret; |
| } |
| platform_set_drvdata(pdev, tps6105x); |
| |
| return 0; |
| } |
| |
| static struct platform_driver tps6105x_regulator_driver = { |
| .driver = { |
| .name = "tps6105x-regulator", |
| }, |
| .probe = tps6105x_regulator_probe, |
| }; |
| |
| static __init int tps6105x_regulator_init(void) |
| { |
| return platform_driver_register(&tps6105x_regulator_driver); |
| } |
| subsys_initcall(tps6105x_regulator_init); |
| |
| static __exit void tps6105x_regulator_exit(void) |
| { |
| platform_driver_unregister(&tps6105x_regulator_driver); |
| } |
| module_exit(tps6105x_regulator_exit); |
| |
| MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); |
| MODULE_DESCRIPTION("TPS6105x regulator driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:tps6105x-regulator"); |