| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * DMA Engine test module |
| * |
| * Copyright (C) 2007 Atmel Corporation |
| * Copyright (C) 2013 Intel Corporation |
| */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/err.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/dmaengine.h> |
| #include <linux/freezer.h> |
| #include <linux/init.h> |
| #include <linux/kthread.h> |
| #include <linux/sched/task.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/random.h> |
| #include <linux/slab.h> |
| #include <linux/wait.h> |
| |
| static bool nobounce; |
| module_param(nobounce, bool, 0644); |
| MODULE_PARM_DESC(nobounce, "Prevent using swiotlb buffer (default: use swiotlb buffer)"); |
| |
| static unsigned int test_buf_size = 16384; |
| module_param(test_buf_size, uint, 0644); |
| MODULE_PARM_DESC(test_buf_size, "Size of the memcpy test buffer"); |
| |
| static char test_device[32]; |
| module_param_string(device, test_device, sizeof(test_device), 0644); |
| MODULE_PARM_DESC(device, "Bus ID of the DMA Engine to test (default: any)"); |
| |
| static unsigned int threads_per_chan = 1; |
| module_param(threads_per_chan, uint, 0644); |
| MODULE_PARM_DESC(threads_per_chan, |
| "Number of threads to start per channel (default: 1)"); |
| |
| static unsigned int max_channels; |
| module_param(max_channels, uint, 0644); |
| MODULE_PARM_DESC(max_channels, |
| "Maximum number of channels to use (default: all)"); |
| |
| static unsigned int iterations; |
| module_param(iterations, uint, 0644); |
| MODULE_PARM_DESC(iterations, |
| "Iterations before stopping test (default: infinite)"); |
| |
| static unsigned int dmatest; |
| module_param(dmatest, uint, 0644); |
| MODULE_PARM_DESC(dmatest, |
| "dmatest 0-memcpy 1-memset (default: 0)"); |
| |
| static unsigned int xor_sources = 3; |
| module_param(xor_sources, uint, 0644); |
| MODULE_PARM_DESC(xor_sources, |
| "Number of xor source buffers (default: 3)"); |
| |
| static unsigned int pq_sources = 3; |
| module_param(pq_sources, uint, 0644); |
| MODULE_PARM_DESC(pq_sources, |
| "Number of p+q source buffers (default: 3)"); |
| |
| static int timeout = 3000; |
| module_param(timeout, int, 0644); |
| MODULE_PARM_DESC(timeout, "Transfer Timeout in msec (default: 3000), " |
| "Pass -1 for infinite timeout"); |
| |
| static bool noverify; |
| module_param(noverify, bool, 0644); |
| MODULE_PARM_DESC(noverify, "Disable data verification (default: verify)"); |
| |
| static bool norandom; |
| module_param(norandom, bool, 0644); |
| MODULE_PARM_DESC(norandom, "Disable random offset setup (default: random)"); |
| |
| static bool verbose; |
| module_param(verbose, bool, 0644); |
| MODULE_PARM_DESC(verbose, "Enable \"success\" result messages (default: off)"); |
| |
| static int alignment = -1; |
| module_param(alignment, int, 0644); |
| MODULE_PARM_DESC(alignment, "Custom data address alignment taken as 2^(alignment) (default: not used (-1))"); |
| |
| static unsigned int transfer_size; |
| module_param(transfer_size, uint, 0644); |
| MODULE_PARM_DESC(transfer_size, "Optional custom transfer size in bytes (default: not used (0))"); |
| |
| static bool polled; |
| module_param(polled, bool, 0644); |
| MODULE_PARM_DESC(polled, "Use polling for completion instead of interrupts"); |
| |
| /** |
| * struct dmatest_params - test parameters. |
| * @nobounce: prevent using swiotlb buffer |
| * @buf_size: size of the memcpy test buffer |
| * @channel: bus ID of the channel to test |
| * @device: bus ID of the DMA Engine to test |
| * @threads_per_chan: number of threads to start per channel |
| * @max_channels: maximum number of channels to use |
| * @iterations: iterations before stopping test |
| * @xor_sources: number of xor source buffers |
| * @pq_sources: number of p+q source buffers |
| * @timeout: transfer timeout in msec, -1 for infinite timeout |
| * @noverify: disable data verification |
| * @norandom: disable random offset setup |
| * @alignment: custom data address alignment taken as 2^alignment |
| * @transfer_size: custom transfer size in bytes |
| * @polled: use polling for completion instead of interrupts |
| */ |
| struct dmatest_params { |
| bool nobounce; |
| unsigned int buf_size; |
| char channel[20]; |
| char device[32]; |
| unsigned int threads_per_chan; |
| unsigned int max_channels; |
| unsigned int iterations; |
| unsigned int xor_sources; |
| unsigned int pq_sources; |
| int timeout; |
| bool noverify; |
| bool norandom; |
| int alignment; |
| unsigned int transfer_size; |
| bool polled; |
| }; |
| |
| /** |
| * struct dmatest_info - test information. |
| * @params: test parameters |
| * @channels: channels under test |
| * @nr_channels: number of channels under test |
| * @lock: access protection to the fields of this structure |
| * @did_init: module has been initialized completely |
| * @last_error: test has faced configuration issues |
| */ |
| static struct dmatest_info { |
| /* Test parameters */ |
| struct dmatest_params params; |
| |
| /* Internal state */ |
| struct list_head channels; |
| unsigned int nr_channels; |
| int last_error; |
| struct mutex lock; |
| bool did_init; |
| } test_info = { |
| .channels = LIST_HEAD_INIT(test_info.channels), |
| .lock = __MUTEX_INITIALIZER(test_info.lock), |
| }; |
| |
| static int dmatest_run_set(const char *val, const struct kernel_param *kp); |
| static int dmatest_run_get(char *val, const struct kernel_param *kp); |
| static const struct kernel_param_ops run_ops = { |
| .set = dmatest_run_set, |
| .get = dmatest_run_get, |
| }; |
| static bool dmatest_run; |
| module_param_cb(run, &run_ops, &dmatest_run, 0644); |
| MODULE_PARM_DESC(run, "Run the test (default: false)"); |
| |
| static int dmatest_chan_set(const char *val, const struct kernel_param *kp); |
| static int dmatest_chan_get(char *val, const struct kernel_param *kp); |
| static const struct kernel_param_ops multi_chan_ops = { |
| .set = dmatest_chan_set, |
| .get = dmatest_chan_get, |
| }; |
| |
| static char test_channel[20]; |
| static struct kparam_string newchan_kps = { |
| .string = test_channel, |
| .maxlen = 20, |
| }; |
| module_param_cb(channel, &multi_chan_ops, &newchan_kps, 0644); |
| MODULE_PARM_DESC(channel, "Bus ID of the channel to test (default: any)"); |
| |
| static int dmatest_test_list_get(char *val, const struct kernel_param *kp); |
| static const struct kernel_param_ops test_list_ops = { |
| .get = dmatest_test_list_get, |
| }; |
| module_param_cb(test_list, &test_list_ops, NULL, 0444); |
| MODULE_PARM_DESC(test_list, "Print current test list"); |
| |
| /* Maximum amount of mismatched bytes in buffer to print */ |
| #define MAX_ERROR_COUNT 32 |
| |
| /* |
| * Initialization patterns. All bytes in the source buffer has bit 7 |
| * set, all bytes in the destination buffer has bit 7 cleared. |
| * |
| * Bit 6 is set for all bytes which are to be copied by the DMA |
| * engine. Bit 5 is set for all bytes which are to be overwritten by |
| * the DMA engine. |
| * |
| * The remaining bits are the inverse of a counter which increments by |
| * one for each byte address. |
| */ |
| #define PATTERN_SRC 0x80 |
| #define PATTERN_DST 0x00 |
| #define PATTERN_COPY 0x40 |
| #define PATTERN_OVERWRITE 0x20 |
| #define PATTERN_COUNT_MASK 0x1f |
| #define PATTERN_MEMSET_IDX 0x01 |
| |
| /* Fixed point arithmetic ops */ |
| #define FIXPT_SHIFT 8 |
| #define FIXPNT_MASK 0xFF |
| #define FIXPT_TO_INT(a) ((a) >> FIXPT_SHIFT) |
| #define INT_TO_FIXPT(a) ((a) << FIXPT_SHIFT) |
| #define FIXPT_GET_FRAC(a) ((((a) & FIXPNT_MASK) * 100) >> FIXPT_SHIFT) |
| |
| /* poor man's completion - we want to use wait_event_freezable() on it */ |
| struct dmatest_done { |
| bool done; |
| wait_queue_head_t *wait; |
| }; |
| |
| struct dmatest_data { |
| u8 **raw; |
| u8 **aligned; |
| gfp_t gfp_flags; |
| unsigned int cnt; |
| unsigned int off; |
| }; |
| |
| struct dmatest_thread { |
| struct list_head node; |
| struct dmatest_info *info; |
| struct task_struct *task; |
| struct dma_chan *chan; |
| struct dmatest_data src; |
| struct dmatest_data dst; |
| enum dma_transaction_type type; |
| wait_queue_head_t done_wait; |
| struct dmatest_done test_done; |
| bool done; |
| bool pending; |
| }; |
| |
| struct dmatest_chan { |
| struct list_head node; |
| struct dma_chan *chan; |
| struct list_head threads; |
| }; |
| |
| static DECLARE_WAIT_QUEUE_HEAD(thread_wait); |
| static bool wait; |
| |
| static bool is_threaded_test_run(struct dmatest_info *info) |
| { |
| struct dmatest_chan *dtc; |
| |
| list_for_each_entry(dtc, &info->channels, node) { |
| struct dmatest_thread *thread; |
| |
| list_for_each_entry(thread, &dtc->threads, node) { |
| if (!thread->done && !thread->pending) |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static bool is_threaded_test_pending(struct dmatest_info *info) |
| { |
| struct dmatest_chan *dtc; |
| |
| list_for_each_entry(dtc, &info->channels, node) { |
| struct dmatest_thread *thread; |
| |
| list_for_each_entry(thread, &dtc->threads, node) { |
| if (thread->pending) |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| static int dmatest_wait_get(char *val, const struct kernel_param *kp) |
| { |
| struct dmatest_info *info = &test_info; |
| struct dmatest_params *params = &info->params; |
| |
| if (params->iterations) |
| wait_event(thread_wait, !is_threaded_test_run(info)); |
| wait = true; |
| return param_get_bool(val, kp); |
| } |
| |
| static const struct kernel_param_ops wait_ops = { |
| .get = dmatest_wait_get, |
| .set = param_set_bool, |
| }; |
| module_param_cb(wait, &wait_ops, &wait, 0444); |
| MODULE_PARM_DESC(wait, "Wait for tests to complete (default: false)"); |
| |
| static bool dmatest_match_channel(struct dmatest_params *params, |
| struct dma_chan *chan) |
| { |
| if (params->channel[0] == '\0') |
| return true; |
| return strcmp(dma_chan_name(chan), params->channel) == 0; |
| } |
| |
| static bool dmatest_match_device(struct dmatest_params *params, |
| struct dma_device *device) |
| { |
| if (params->device[0] == '\0') |
| return true; |
| return strcmp(dev_name(device->dev), params->device) == 0; |
| } |
| |
| static unsigned long dmatest_random(void) |
| { |
| unsigned long buf; |
| |
| get_random_bytes(&buf, sizeof(buf)); |
| return buf; |
| } |
| |
| static inline u8 gen_inv_idx(u8 index, bool is_memset) |
| { |
| u8 val = is_memset ? PATTERN_MEMSET_IDX : index; |
| |
| return ~val & PATTERN_COUNT_MASK; |
| } |
| |
| static inline u8 gen_src_value(u8 index, bool is_memset) |
| { |
| return PATTERN_SRC | gen_inv_idx(index, is_memset); |
| } |
| |
| static inline u8 gen_dst_value(u8 index, bool is_memset) |
| { |
| return PATTERN_DST | gen_inv_idx(index, is_memset); |
| } |
| |
| static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len, |
| unsigned int buf_size, bool is_memset) |
| { |
| unsigned int i; |
| u8 *buf; |
| |
| for (; (buf = *bufs); bufs++) { |
| for (i = 0; i < start; i++) |
| buf[i] = gen_src_value(i, is_memset); |
| for ( ; i < start + len; i++) |
| buf[i] = gen_src_value(i, is_memset) | PATTERN_COPY; |
| for ( ; i < buf_size; i++) |
| buf[i] = gen_src_value(i, is_memset); |
| buf++; |
| } |
| } |
| |
| static void dmatest_init_dsts(u8 **bufs, unsigned int start, unsigned int len, |
| unsigned int buf_size, bool is_memset) |
| { |
| unsigned int i; |
| u8 *buf; |
| |
| for (; (buf = *bufs); bufs++) { |
| for (i = 0; i < start; i++) |
| buf[i] = gen_dst_value(i, is_memset); |
| for ( ; i < start + len; i++) |
| buf[i] = gen_dst_value(i, is_memset) | |
| PATTERN_OVERWRITE; |
| for ( ; i < buf_size; i++) |
| buf[i] = gen_dst_value(i, is_memset); |
| } |
| } |
| |
| static void dmatest_mismatch(u8 actual, u8 pattern, unsigned int index, |
| unsigned int counter, bool is_srcbuf, bool is_memset) |
| { |
| u8 diff = actual ^ pattern; |
| u8 expected = pattern | gen_inv_idx(counter, is_memset); |
| const char *thread_name = current->comm; |
| |
| if (is_srcbuf) |
| pr_warn("%s: srcbuf[0x%x] overwritten! Expected %02x, got %02x\n", |
| thread_name, index, expected, actual); |
| else if ((pattern & PATTERN_COPY) |
| && (diff & (PATTERN_COPY | PATTERN_OVERWRITE))) |
| pr_warn("%s: dstbuf[0x%x] not copied! Expected %02x, got %02x\n", |
| thread_name, index, expected, actual); |
| else if (diff & PATTERN_SRC) |
| pr_warn("%s: dstbuf[0x%x] was copied! Expected %02x, got %02x\n", |
| thread_name, index, expected, actual); |
| else |
| pr_warn("%s: dstbuf[0x%x] mismatch! Expected %02x, got %02x\n", |
| thread_name, index, expected, actual); |
| } |
| |
| static unsigned int dmatest_verify(u8 **bufs, unsigned int start, |
| unsigned int end, unsigned int counter, u8 pattern, |
| bool is_srcbuf, bool is_memset) |
| { |
| unsigned int i; |
| unsigned int error_count = 0; |
| u8 actual; |
| u8 expected; |
| u8 *buf; |
| unsigned int counter_orig = counter; |
| |
| for (; (buf = *bufs); bufs++) { |
| counter = counter_orig; |
| for (i = start; i < end; i++) { |
| actual = buf[i]; |
| expected = pattern | gen_inv_idx(counter, is_memset); |
| if (actual != expected) { |
| if (error_count < MAX_ERROR_COUNT) |
| dmatest_mismatch(actual, pattern, i, |
| counter, is_srcbuf, |
| is_memset); |
| error_count++; |
| } |
| counter++; |
| } |
| } |
| |
| if (error_count > MAX_ERROR_COUNT) |
| pr_warn("%s: %u errors suppressed\n", |
| current->comm, error_count - MAX_ERROR_COUNT); |
| |
| return error_count; |
| } |
| |
| |
| static void dmatest_callback(void *arg) |
| { |
| struct dmatest_done *done = arg; |
| struct dmatest_thread *thread = |
| container_of(done, struct dmatest_thread, test_done); |
| if (!thread->done) { |
| done->done = true; |
| wake_up_all(done->wait); |
| } else { |
| /* |
| * If thread->done, it means that this callback occurred |
| * after the parent thread has cleaned up. This can |
| * happen in the case that driver doesn't implement |
| * the terminate_all() functionality and a dma operation |
| * did not occur within the timeout period |
| */ |
| WARN(1, "dmatest: Kernel memory may be corrupted!!\n"); |
| } |
| } |
| |
| static unsigned int min_odd(unsigned int x, unsigned int y) |
| { |
| unsigned int val = min(x, y); |
| |
| return val % 2 ? val : val - 1; |
| } |
| |
| static void result(const char *err, unsigned int n, unsigned int src_off, |
| unsigned int dst_off, unsigned int len, unsigned long data) |
| { |
| if (IS_ERR_VALUE(data)) { |
| pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%ld)\n", |
| current->comm, n, err, src_off, dst_off, len, data); |
| } else { |
| pr_info("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n", |
| current->comm, n, err, src_off, dst_off, len, data); |
| } |
| } |
| |
| static void dbg_result(const char *err, unsigned int n, unsigned int src_off, |
| unsigned int dst_off, unsigned int len, |
| unsigned long data) |
| { |
| pr_debug("%s: result #%u: '%s' with src_off=0x%x dst_off=0x%x len=0x%x (%lu)\n", |
| current->comm, n, err, src_off, dst_off, len, data); |
| } |
| |
| #define verbose_result(err, n, src_off, dst_off, len, data) ({ \ |
| if (verbose) \ |
| result(err, n, src_off, dst_off, len, data); \ |
| else \ |
| dbg_result(err, n, src_off, dst_off, len, data);\ |
| }) |
| |
| static unsigned long long dmatest_persec(s64 runtime, unsigned int val) |
| { |
| unsigned long long per_sec = 1000000; |
| |
| if (runtime <= 0) |
| return 0; |
| |
| /* drop precision until runtime is 32-bits */ |
| while (runtime > UINT_MAX) { |
| runtime >>= 1; |
| per_sec <<= 1; |
| } |
| |
| per_sec *= val; |
| per_sec = INT_TO_FIXPT(per_sec); |
| do_div(per_sec, runtime); |
| |
| return per_sec; |
| } |
| |
| static unsigned long long dmatest_KBs(s64 runtime, unsigned long long len) |
| { |
| return FIXPT_TO_INT(dmatest_persec(runtime, len >> 10)); |
| } |
| |
| static void __dmatest_free_test_data(struct dmatest_data *d, unsigned int cnt) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < cnt; i++) |
| kfree(d->raw[i]); |
| |
| kfree(d->aligned); |
| kfree(d->raw); |
| } |
| |
| static void dmatest_free_test_data(struct dmatest_data *d) |
| { |
| __dmatest_free_test_data(d, d->cnt); |
| } |
| |
| static int dmatest_alloc_test_data(struct dmatest_data *d, |
| unsigned int buf_size, u8 align) |
| { |
| unsigned int i = 0; |
| |
| d->raw = kcalloc(d->cnt + 1, sizeof(u8 *), GFP_KERNEL); |
| if (!d->raw) |
| return -ENOMEM; |
| |
| d->aligned = kcalloc(d->cnt + 1, sizeof(u8 *), GFP_KERNEL); |
| if (!d->aligned) |
| goto err; |
| |
| for (i = 0; i < d->cnt; i++) { |
| d->raw[i] = kmalloc(buf_size + align, d->gfp_flags); |
| if (!d->raw[i]) |
| goto err; |
| |
| /* align to alignment restriction */ |
| if (align) |
| d->aligned[i] = PTR_ALIGN(d->raw[i], align); |
| else |
| d->aligned[i] = d->raw[i]; |
| } |
| |
| return 0; |
| err: |
| __dmatest_free_test_data(d, i); |
| return -ENOMEM; |
| } |
| |
| /* |
| * This function repeatedly tests DMA transfers of various lengths and |
| * offsets for a given operation type until it is told to exit by |
| * kthread_stop(). There may be multiple threads running this function |
| * in parallel for a single channel, and there may be multiple channels |
| * being tested in parallel. |
| * |
| * Before each test, the source and destination buffer is initialized |
| * with a known pattern. This pattern is different depending on |
| * whether it's in an area which is supposed to be copied or |
| * overwritten, and different in the source and destination buffers. |
| * So if the DMA engine doesn't copy exactly what we tell it to copy, |
| * we'll notice. |
| */ |
| static int dmatest_func(void *data) |
| { |
| struct dmatest_thread *thread = data; |
| struct dmatest_done *done = &thread->test_done; |
| struct dmatest_info *info; |
| struct dmatest_params *params; |
| struct dma_chan *chan; |
| struct dma_device *dev; |
| struct device *dma_dev; |
| unsigned int error_count; |
| unsigned int failed_tests = 0; |
| unsigned int total_tests = 0; |
| dma_cookie_t cookie; |
| enum dma_status status; |
| enum dma_ctrl_flags flags; |
| u8 *pq_coefs = NULL; |
| int ret; |
| unsigned int buf_size; |
| struct dmatest_data *src; |
| struct dmatest_data *dst; |
| int i; |
| ktime_t ktime, start, diff; |
| ktime_t filltime = 0; |
| ktime_t comparetime = 0; |
| s64 runtime = 0; |
| unsigned long long total_len = 0; |
| unsigned long long iops = 0; |
| u8 align = 0; |
| bool is_memset = false; |
| dma_addr_t *srcs; |
| dma_addr_t *dma_pq; |
| |
| set_freezable(); |
| |
| ret = -ENOMEM; |
| |
| smp_rmb(); |
| thread->pending = false; |
| info = thread->info; |
| params = &info->params; |
| chan = thread->chan; |
| dev = chan->device; |
| dma_dev = dmaengine_get_dma_device(chan); |
| |
| src = &thread->src; |
| dst = &thread->dst; |
| if (thread->type == DMA_MEMCPY) { |
| align = params->alignment < 0 ? dev->copy_align : |
| params->alignment; |
| src->cnt = dst->cnt = 1; |
| } else if (thread->type == DMA_MEMSET) { |
| align = params->alignment < 0 ? dev->fill_align : |
| params->alignment; |
| src->cnt = dst->cnt = 1; |
| is_memset = true; |
| } else if (thread->type == DMA_XOR) { |
| /* force odd to ensure dst = src */ |
| src->cnt = min_odd(params->xor_sources | 1, dev->max_xor); |
| dst->cnt = 1; |
| align = params->alignment < 0 ? dev->xor_align : |
| params->alignment; |
| } else if (thread->type == DMA_PQ) { |
| /* force odd to ensure dst = src */ |
| src->cnt = min_odd(params->pq_sources | 1, dma_maxpq(dev, 0)); |
| dst->cnt = 2; |
| align = params->alignment < 0 ? dev->pq_align : |
| params->alignment; |
| |
| pq_coefs = kmalloc(params->pq_sources + 1, GFP_KERNEL); |
| if (!pq_coefs) |
| goto err_thread_type; |
| |
| for (i = 0; i < src->cnt; i++) |
| pq_coefs[i] = 1; |
| } else |
| goto err_thread_type; |
| |
| /* Check if buffer count fits into map count variable (u8) */ |
| if ((src->cnt + dst->cnt) >= 255) { |
| pr_err("too many buffers (%d of 255 supported)\n", |
| src->cnt + dst->cnt); |
| goto err_free_coefs; |
| } |
| |
| buf_size = params->buf_size; |
| if (1 << align > buf_size) { |
| pr_err("%u-byte buffer too small for %d-byte alignment\n", |
| buf_size, 1 << align); |
| goto err_free_coefs; |
| } |
| |
| src->gfp_flags = GFP_KERNEL; |
| dst->gfp_flags = GFP_KERNEL; |
| if (params->nobounce) { |
| src->gfp_flags = GFP_DMA; |
| dst->gfp_flags = GFP_DMA; |
| } |
| |
| if (dmatest_alloc_test_data(src, buf_size, align) < 0) |
| goto err_free_coefs; |
| |
| if (dmatest_alloc_test_data(dst, buf_size, align) < 0) |
| goto err_src; |
| |
| set_user_nice(current, 10); |
| |
| srcs = kcalloc(src->cnt, sizeof(dma_addr_t), GFP_KERNEL); |
| if (!srcs) |
| goto err_dst; |
| |
| dma_pq = kcalloc(dst->cnt, sizeof(dma_addr_t), GFP_KERNEL); |
| if (!dma_pq) |
| goto err_srcs_array; |
| |
| /* |
| * src and dst buffers are freed by ourselves below |
| */ |
| if (params->polled) |
| flags = DMA_CTRL_ACK; |
| else |
| flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; |
| |
| ktime = ktime_get(); |
| while (!(kthread_should_stop() || |
| (params->iterations && total_tests >= params->iterations))) { |
| struct dma_async_tx_descriptor *tx = NULL; |
| struct dmaengine_unmap_data *um; |
| dma_addr_t *dsts; |
| unsigned int len; |
| |
| total_tests++; |
| |
| if (params->transfer_size) { |
| if (params->transfer_size >= buf_size) { |
| pr_err("%u-byte transfer size must be lower than %u-buffer size\n", |
| params->transfer_size, buf_size); |
| break; |
| } |
| len = params->transfer_size; |
| } else if (params->norandom) { |
| len = buf_size; |
| } else { |
| len = dmatest_random() % buf_size + 1; |
| } |
| |
| /* Do not alter transfer size explicitly defined by user */ |
| if (!params->transfer_size) { |
| len = (len >> align) << align; |
| if (!len) |
| len = 1 << align; |
| } |
| total_len += len; |
| |
| if (params->norandom) { |
| src->off = 0; |
| dst->off = 0; |
| } else { |
| src->off = dmatest_random() % (buf_size - len + 1); |
| dst->off = dmatest_random() % (buf_size - len + 1); |
| |
| src->off = (src->off >> align) << align; |
| dst->off = (dst->off >> align) << align; |
| } |
| |
| if (!params->noverify) { |
| start = ktime_get(); |
| dmatest_init_srcs(src->aligned, src->off, len, |
| buf_size, is_memset); |
| dmatest_init_dsts(dst->aligned, dst->off, len, |
| buf_size, is_memset); |
| |
| diff = ktime_sub(ktime_get(), start); |
| filltime = ktime_add(filltime, diff); |
| } |
| |
| um = dmaengine_get_unmap_data(dma_dev, src->cnt + dst->cnt, |
| GFP_KERNEL); |
| if (!um) { |
| failed_tests++; |
| result("unmap data NULL", total_tests, |
| src->off, dst->off, len, ret); |
| continue; |
| } |
| |
| um->len = buf_size; |
| for (i = 0; i < src->cnt; i++) { |
| void *buf = src->aligned[i]; |
| struct page *pg = virt_to_page(buf); |
| unsigned long pg_off = offset_in_page(buf); |
| |
| um->addr[i] = dma_map_page(dma_dev, pg, pg_off, |
| um->len, DMA_TO_DEVICE); |
| srcs[i] = um->addr[i] + src->off; |
| ret = dma_mapping_error(dma_dev, um->addr[i]); |
| if (ret) { |
| result("src mapping error", total_tests, |
| src->off, dst->off, len, ret); |
| goto error_unmap_continue; |
| } |
| um->to_cnt++; |
| } |
| /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */ |
| dsts = &um->addr[src->cnt]; |
| for (i = 0; i < dst->cnt; i++) { |
| void *buf = dst->aligned[i]; |
| struct page *pg = virt_to_page(buf); |
| unsigned long pg_off = offset_in_page(buf); |
| |
| dsts[i] = dma_map_page(dma_dev, pg, pg_off, um->len, |
| DMA_BIDIRECTIONAL); |
| ret = dma_mapping_error(dma_dev, dsts[i]); |
| if (ret) { |
| result("dst mapping error", total_tests, |
| src->off, dst->off, len, ret); |
| goto error_unmap_continue; |
| } |
| um->bidi_cnt++; |
| } |
| |
| if (thread->type == DMA_MEMCPY) |
| tx = dev->device_prep_dma_memcpy(chan, |
| dsts[0] + dst->off, |
| srcs[0], len, flags); |
| else if (thread->type == DMA_MEMSET) |
| tx = dev->device_prep_dma_memset(chan, |
| dsts[0] + dst->off, |
| *(src->aligned[0] + src->off), |
| len, flags); |
| else if (thread->type == DMA_XOR) |
| tx = dev->device_prep_dma_xor(chan, |
| dsts[0] + dst->off, |
| srcs, src->cnt, |
| len, flags); |
| else if (thread->type == DMA_PQ) { |
| for (i = 0; i < dst->cnt; i++) |
| dma_pq[i] = dsts[i] + dst->off; |
| tx = dev->device_prep_dma_pq(chan, dma_pq, srcs, |
| src->cnt, pq_coefs, |
| len, flags); |
| } |
| |
| if (!tx) { |
| result("prep error", total_tests, src->off, |
| dst->off, len, ret); |
| msleep(100); |
| goto error_unmap_continue; |
| } |
| |
| done->done = false; |
| if (!params->polled) { |
| tx->callback = dmatest_callback; |
| tx->callback_param = done; |
| } |
| cookie = tx->tx_submit(tx); |
| |
| if (dma_submit_error(cookie)) { |
| result("submit error", total_tests, src->off, |
| dst->off, len, ret); |
| msleep(100); |
| goto error_unmap_continue; |
| } |
| |
| if (params->polled) { |
| status = dma_sync_wait(chan, cookie); |
| dmaengine_terminate_sync(chan); |
| if (status == DMA_COMPLETE) |
| done->done = true; |
| } else { |
| dma_async_issue_pending(chan); |
| |
| wait_event_freezable_timeout(thread->done_wait, |
| done->done, |
| msecs_to_jiffies(params->timeout)); |
| |
| status = dma_async_is_tx_complete(chan, cookie, NULL, |
| NULL); |
| } |
| |
| if (!done->done) { |
| result("test timed out", total_tests, src->off, dst->off, |
| len, 0); |
| goto error_unmap_continue; |
| } else if (status != DMA_COMPLETE && |
| !(dma_has_cap(DMA_COMPLETION_NO_ORDER, |
| dev->cap_mask) && |
| status == DMA_OUT_OF_ORDER)) { |
| result(status == DMA_ERROR ? |
| "completion error status" : |
| "completion busy status", total_tests, src->off, |
| dst->off, len, ret); |
| goto error_unmap_continue; |
| } |
| |
| dmaengine_unmap_put(um); |
| |
| if (params->noverify) { |
| verbose_result("test passed", total_tests, src->off, |
| dst->off, len, 0); |
| continue; |
| } |
| |
| start = ktime_get(); |
| pr_debug("%s: verifying source buffer...\n", current->comm); |
| error_count = dmatest_verify(src->aligned, 0, src->off, |
| 0, PATTERN_SRC, true, is_memset); |
| error_count += dmatest_verify(src->aligned, src->off, |
| src->off + len, src->off, |
| PATTERN_SRC | PATTERN_COPY, true, is_memset); |
| error_count += dmatest_verify(src->aligned, src->off + len, |
| buf_size, src->off + len, |
| PATTERN_SRC, true, is_memset); |
| |
| pr_debug("%s: verifying dest buffer...\n", current->comm); |
| error_count += dmatest_verify(dst->aligned, 0, dst->off, |
| 0, PATTERN_DST, false, is_memset); |
| |
| error_count += dmatest_verify(dst->aligned, dst->off, |
| dst->off + len, src->off, |
| PATTERN_SRC | PATTERN_COPY, false, is_memset); |
| |
| error_count += dmatest_verify(dst->aligned, dst->off + len, |
| buf_size, dst->off + len, |
| PATTERN_DST, false, is_memset); |
| |
| diff = ktime_sub(ktime_get(), start); |
| comparetime = ktime_add(comparetime, diff); |
| |
| if (error_count) { |
| result("data error", total_tests, src->off, dst->off, |
| len, error_count); |
| failed_tests++; |
| } else { |
| verbose_result("test passed", total_tests, src->off, |
| dst->off, len, 0); |
| } |
| |
| continue; |
| |
| error_unmap_continue: |
| dmaengine_unmap_put(um); |
| failed_tests++; |
| } |
| ktime = ktime_sub(ktime_get(), ktime); |
| ktime = ktime_sub(ktime, comparetime); |
| ktime = ktime_sub(ktime, filltime); |
| runtime = ktime_to_us(ktime); |
| |
| ret = 0; |
| kfree(dma_pq); |
| err_srcs_array: |
| kfree(srcs); |
| err_dst: |
| dmatest_free_test_data(dst); |
| err_src: |
| dmatest_free_test_data(src); |
| err_free_coefs: |
| kfree(pq_coefs); |
| err_thread_type: |
| iops = dmatest_persec(runtime, total_tests); |
| pr_info("%s: summary %u tests, %u failures %llu.%02llu iops %llu KB/s (%d)\n", |
| current->comm, total_tests, failed_tests, |
| FIXPT_TO_INT(iops), FIXPT_GET_FRAC(iops), |
| dmatest_KBs(runtime, total_len), ret); |
| |
| /* terminate all transfers on specified channels */ |
| if (ret || failed_tests) |
| dmaengine_terminate_sync(chan); |
| |
| thread->done = true; |
| wake_up(&thread_wait); |
| |
| return ret; |
| } |
| |
| static void dmatest_cleanup_channel(struct dmatest_chan *dtc) |
| { |
| struct dmatest_thread *thread; |
| struct dmatest_thread *_thread; |
| int ret; |
| |
| list_for_each_entry_safe(thread, _thread, &dtc->threads, node) { |
| ret = kthread_stop(thread->task); |
| pr_debug("thread %s exited with status %d\n", |
| thread->task->comm, ret); |
| list_del(&thread->node); |
| put_task_struct(thread->task); |
| kfree(thread); |
| } |
| |
| /* terminate all transfers on specified channels */ |
| dmaengine_terminate_sync(dtc->chan); |
| |
| kfree(dtc); |
| } |
| |
| static int dmatest_add_threads(struct dmatest_info *info, |
| struct dmatest_chan *dtc, enum dma_transaction_type type) |
| { |
| struct dmatest_params *params = &info->params; |
| struct dmatest_thread *thread; |
| struct dma_chan *chan = dtc->chan; |
| char *op; |
| unsigned int i; |
| |
| if (type == DMA_MEMCPY) |
| op = "copy"; |
| else if (type == DMA_MEMSET) |
| op = "set"; |
| else if (type == DMA_XOR) |
| op = "xor"; |
| else if (type == DMA_PQ) |
| op = "pq"; |
| else |
| return -EINVAL; |
| |
| for (i = 0; i < params->threads_per_chan; i++) { |
| thread = kzalloc(sizeof(struct dmatest_thread), GFP_KERNEL); |
| if (!thread) { |
| pr_warn("No memory for %s-%s%u\n", |
| dma_chan_name(chan), op, i); |
| break; |
| } |
| thread->info = info; |
| thread->chan = dtc->chan; |
| thread->type = type; |
| thread->test_done.wait = &thread->done_wait; |
| init_waitqueue_head(&thread->done_wait); |
| smp_wmb(); |
| thread->task = kthread_create(dmatest_func, thread, "%s-%s%u", |
| dma_chan_name(chan), op, i); |
| if (IS_ERR(thread->task)) { |
| pr_warn("Failed to create thread %s-%s%u\n", |
| dma_chan_name(chan), op, i); |
| kfree(thread); |
| break; |
| } |
| |
| /* srcbuf and dstbuf are allocated by the thread itself */ |
| get_task_struct(thread->task); |
| list_add_tail(&thread->node, &dtc->threads); |
| thread->pending = true; |
| } |
| |
| return i; |
| } |
| |
| static int dmatest_add_channel(struct dmatest_info *info, |
| struct dma_chan *chan) |
| { |
| struct dmatest_chan *dtc; |
| struct dma_device *dma_dev = chan->device; |
| unsigned int thread_count = 0; |
| int cnt; |
| |
| dtc = kmalloc(sizeof(struct dmatest_chan), GFP_KERNEL); |
| if (!dtc) { |
| pr_warn("No memory for %s\n", dma_chan_name(chan)); |
| return -ENOMEM; |
| } |
| |
| dtc->chan = chan; |
| INIT_LIST_HEAD(&dtc->threads); |
| |
| if (dma_has_cap(DMA_COMPLETION_NO_ORDER, dma_dev->cap_mask) && |
| info->params.polled) { |
| info->params.polled = false; |
| pr_warn("DMA_COMPLETION_NO_ORDER, polled disabled\n"); |
| } |
| |
| if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) { |
| if (dmatest == 0) { |
| cnt = dmatest_add_threads(info, dtc, DMA_MEMCPY); |
| thread_count += cnt > 0 ? cnt : 0; |
| } |
| } |
| |
| if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) { |
| if (dmatest == 1) { |
| cnt = dmatest_add_threads(info, dtc, DMA_MEMSET); |
| thread_count += cnt > 0 ? cnt : 0; |
| } |
| } |
| |
| if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) { |
| cnt = dmatest_add_threads(info, dtc, DMA_XOR); |
| thread_count += cnt > 0 ? cnt : 0; |
| } |
| if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) { |
| cnt = dmatest_add_threads(info, dtc, DMA_PQ); |
| thread_count += cnt > 0 ? cnt : 0; |
| } |
| |
| pr_info("Added %u threads using %s\n", |
| thread_count, dma_chan_name(chan)); |
| |
| list_add_tail(&dtc->node, &info->channels); |
| info->nr_channels++; |
| |
| return 0; |
| } |
| |
| static bool filter(struct dma_chan *chan, void *param) |
| { |
| return dmatest_match_channel(param, chan) && dmatest_match_device(param, chan->device); |
| } |
| |
| static void request_channels(struct dmatest_info *info, |
| enum dma_transaction_type type) |
| { |
| dma_cap_mask_t mask; |
| |
| dma_cap_zero(mask); |
| dma_cap_set(type, mask); |
| for (;;) { |
| struct dmatest_params *params = &info->params; |
| struct dma_chan *chan; |
| |
| chan = dma_request_channel(mask, filter, params); |
| if (chan) { |
| if (dmatest_add_channel(info, chan)) { |
| dma_release_channel(chan); |
| break; /* add_channel failed, punt */ |
| } |
| } else |
| break; /* no more channels available */ |
| if (params->max_channels && |
| info->nr_channels >= params->max_channels) |
| break; /* we have all we need */ |
| } |
| } |
| |
| static void add_threaded_test(struct dmatest_info *info) |
| { |
| struct dmatest_params *params = &info->params; |
| |
| /* Copy test parameters */ |
| params->nobounce = nobounce; |
| params->buf_size = test_buf_size; |
| strscpy(params->channel, strim(test_channel), sizeof(params->channel)); |
| strscpy(params->device, strim(test_device), sizeof(params->device)); |
| params->threads_per_chan = threads_per_chan; |
| params->max_channels = max_channels; |
| params->iterations = iterations; |
| params->xor_sources = xor_sources; |
| params->pq_sources = pq_sources; |
| params->timeout = timeout; |
| params->noverify = noverify; |
| params->norandom = norandom; |
| params->alignment = alignment; |
| params->transfer_size = transfer_size; |
| params->polled = polled; |
| |
| request_channels(info, DMA_MEMCPY); |
| request_channels(info, DMA_MEMSET); |
| request_channels(info, DMA_XOR); |
| request_channels(info, DMA_PQ); |
| } |
| |
| static void run_pending_tests(struct dmatest_info *info) |
| { |
| struct dmatest_chan *dtc; |
| unsigned int thread_count = 0; |
| |
| list_for_each_entry(dtc, &info->channels, node) { |
| struct dmatest_thread *thread; |
| |
| thread_count = 0; |
| list_for_each_entry(thread, &dtc->threads, node) { |
| wake_up_process(thread->task); |
| thread_count++; |
| } |
| pr_info("Started %u threads using %s\n", |
| thread_count, dma_chan_name(dtc->chan)); |
| } |
| } |
| |
| static void stop_threaded_test(struct dmatest_info *info) |
| { |
| struct dmatest_chan *dtc, *_dtc; |
| struct dma_chan *chan; |
| |
| list_for_each_entry_safe(dtc, _dtc, &info->channels, node) { |
| list_del(&dtc->node); |
| chan = dtc->chan; |
| dmatest_cleanup_channel(dtc); |
| pr_debug("dropped channel %s\n", dma_chan_name(chan)); |
| dma_release_channel(chan); |
| } |
| |
| info->nr_channels = 0; |
| } |
| |
| static void start_threaded_tests(struct dmatest_info *info) |
| { |
| /* we might be called early to set run=, defer running until all |
| * parameters have been evaluated |
| */ |
| if (!info->did_init) |
| return; |
| |
| run_pending_tests(info); |
| } |
| |
| static int dmatest_run_get(char *val, const struct kernel_param *kp) |
| { |
| struct dmatest_info *info = &test_info; |
| |
| mutex_lock(&info->lock); |
| if (is_threaded_test_run(info)) { |
| dmatest_run = true; |
| } else { |
| if (!is_threaded_test_pending(info)) |
| stop_threaded_test(info); |
| dmatest_run = false; |
| } |
| mutex_unlock(&info->lock); |
| |
| return param_get_bool(val, kp); |
| } |
| |
| static int dmatest_run_set(const char *val, const struct kernel_param *kp) |
| { |
| struct dmatest_info *info = &test_info; |
| int ret; |
| |
| mutex_lock(&info->lock); |
| ret = param_set_bool(val, kp); |
| if (ret) { |
| mutex_unlock(&info->lock); |
| return ret; |
| } else if (dmatest_run) { |
| if (!is_threaded_test_pending(info)) { |
| /* |
| * We have nothing to run. This can be due to: |
| */ |
| ret = info->last_error; |
| if (ret) { |
| /* 1) Misconfiguration */ |
| pr_err("Channel misconfigured, can't continue\n"); |
| mutex_unlock(&info->lock); |
| return ret; |
| } else { |
| /* 2) We rely on defaults */ |
| pr_info("No channels configured, continue with any\n"); |
| if (!is_threaded_test_run(info)) |
| stop_threaded_test(info); |
| add_threaded_test(info); |
| } |
| } |
| start_threaded_tests(info); |
| } else { |
| stop_threaded_test(info); |
| } |
| |
| mutex_unlock(&info->lock); |
| |
| return ret; |
| } |
| |
| static int dmatest_chan_set(const char *val, const struct kernel_param *kp) |
| { |
| struct dmatest_info *info = &test_info; |
| struct dmatest_chan *dtc; |
| char chan_reset_val[20]; |
| int ret; |
| |
| mutex_lock(&info->lock); |
| ret = param_set_copystring(val, kp); |
| if (ret) { |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| /*Clear any previously run threads */ |
| if (!is_threaded_test_run(info) && !is_threaded_test_pending(info)) |
| stop_threaded_test(info); |
| /* Reject channels that are already registered */ |
| if (is_threaded_test_pending(info)) { |
| list_for_each_entry(dtc, &info->channels, node) { |
| if (strcmp(dma_chan_name(dtc->chan), |
| strim(test_channel)) == 0) { |
| dtc = list_last_entry(&info->channels, |
| struct dmatest_chan, |
| node); |
| strscpy(chan_reset_val, |
| dma_chan_name(dtc->chan), |
| sizeof(chan_reset_val)); |
| ret = -EBUSY; |
| goto add_chan_err; |
| } |
| } |
| } |
| |
| add_threaded_test(info); |
| |
| /* Check if channel was added successfully */ |
| if (!list_empty(&info->channels)) { |
| /* |
| * if new channel was not successfully added, revert the |
| * "test_channel" string to the name of the last successfully |
| * added channel. exception for when users issues empty string |
| * to channel parameter. |
| */ |
| dtc = list_last_entry(&info->channels, struct dmatest_chan, node); |
| if ((strcmp(dma_chan_name(dtc->chan), strim(test_channel)) != 0) |
| && (strcmp("", strim(test_channel)) != 0)) { |
| ret = -EINVAL; |
| strscpy(chan_reset_val, dma_chan_name(dtc->chan), |
| sizeof(chan_reset_val)); |
| goto add_chan_err; |
| } |
| |
| } else { |
| /* Clear test_channel if no channels were added successfully */ |
| strscpy(chan_reset_val, "", sizeof(chan_reset_val)); |
| ret = -EBUSY; |
| goto add_chan_err; |
| } |
| |
| info->last_error = ret; |
| mutex_unlock(&info->lock); |
| |
| return ret; |
| |
| add_chan_err: |
| param_set_copystring(chan_reset_val, kp); |
| info->last_error = ret; |
| mutex_unlock(&info->lock); |
| |
| return ret; |
| } |
| |
| static int dmatest_chan_get(char *val, const struct kernel_param *kp) |
| { |
| struct dmatest_info *info = &test_info; |
| |
| mutex_lock(&info->lock); |
| if (!is_threaded_test_run(info) && !is_threaded_test_pending(info)) { |
| stop_threaded_test(info); |
| strscpy(test_channel, "", sizeof(test_channel)); |
| } |
| mutex_unlock(&info->lock); |
| |
| return param_get_string(val, kp); |
| } |
| |
| static int dmatest_test_list_get(char *val, const struct kernel_param *kp) |
| { |
| struct dmatest_info *info = &test_info; |
| struct dmatest_chan *dtc; |
| unsigned int thread_count = 0; |
| |
| list_for_each_entry(dtc, &info->channels, node) { |
| struct dmatest_thread *thread; |
| |
| thread_count = 0; |
| list_for_each_entry(thread, &dtc->threads, node) { |
| thread_count++; |
| } |
| pr_info("%u threads using %s\n", |
| thread_count, dma_chan_name(dtc->chan)); |
| } |
| |
| return 0; |
| } |
| |
| static int __init dmatest_init(void) |
| { |
| struct dmatest_info *info = &test_info; |
| struct dmatest_params *params = &info->params; |
| |
| if (dmatest_run) { |
| mutex_lock(&info->lock); |
| add_threaded_test(info); |
| run_pending_tests(info); |
| mutex_unlock(&info->lock); |
| } |
| |
| if (params->iterations && wait) |
| wait_event(thread_wait, !is_threaded_test_run(info)); |
| |
| /* module parameters are stable, inittime tests are started, |
| * let userspace take over 'run' control |
| */ |
| info->did_init = true; |
| |
| return 0; |
| } |
| /* when compiled-in wait for drivers to load first */ |
| late_initcall(dmatest_init); |
| |
| static void __exit dmatest_exit(void) |
| { |
| struct dmatest_info *info = &test_info; |
| |
| mutex_lock(&info->lock); |
| stop_threaded_test(info); |
| mutex_unlock(&info->lock); |
| } |
| module_exit(dmatest_exit); |
| |
| MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); |
| MODULE_DESCRIPTION("DMA Engine test module"); |
| MODULE_LICENSE("GPL v2"); |