| /* |
| * Retu/Tahvo MFD driver |
| * |
| * Copyright (C) 2004, 2005 Nokia Corporation |
| * |
| * Based on code written by Juha Yrjölä, David Weinehall and Mikko Ylinen. |
| * Rewritten by Aaro Koskinen. |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/irq.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/retu.h> |
| #include <linux/interrupt.h> |
| #include <linux/moduleparam.h> |
| |
| /* Registers */ |
| #define RETU_REG_ASICR 0x00 /* ASIC ID and revision */ |
| #define RETU_REG_ASICR_VILMA (1 << 7) /* Bit indicating Vilma */ |
| #define RETU_REG_IDR 0x01 /* Interrupt ID */ |
| #define RETU_REG_IMR 0x02 /* Interrupt mask (Retu) */ |
| #define TAHVO_REG_IMR 0x03 /* Interrupt mask (Tahvo) */ |
| |
| /* Interrupt sources */ |
| #define RETU_INT_PWR 0 /* Power button */ |
| |
| struct retu_dev { |
| struct regmap *regmap; |
| struct device *dev; |
| struct mutex mutex; |
| struct regmap_irq_chip_data *irq_data; |
| }; |
| |
| static const struct resource retu_pwrbutton_res[] = { |
| { |
| .name = "retu-pwrbutton", |
| .start = RETU_INT_PWR, |
| .end = RETU_INT_PWR, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static const struct mfd_cell retu_devs[] = { |
| { |
| .name = "retu-wdt" |
| }, |
| { |
| .name = "retu-pwrbutton", |
| .resources = retu_pwrbutton_res, |
| .num_resources = ARRAY_SIZE(retu_pwrbutton_res), |
| } |
| }; |
| |
| static struct regmap_irq retu_irqs[] = { |
| [RETU_INT_PWR] = { |
| .mask = 1 << RETU_INT_PWR, |
| } |
| }; |
| |
| static struct regmap_irq_chip retu_irq_chip = { |
| .name = "RETU", |
| .irqs = retu_irqs, |
| .num_irqs = ARRAY_SIZE(retu_irqs), |
| .num_regs = 1, |
| .status_base = RETU_REG_IDR, |
| .mask_base = RETU_REG_IMR, |
| .ack_base = RETU_REG_IDR, |
| }; |
| |
| /* Retu device registered for the power off. */ |
| static struct retu_dev *retu_pm_power_off; |
| |
| static const struct resource tahvo_usb_res[] = { |
| { |
| .name = "tahvo-usb", |
| .start = TAHVO_INT_VBUS, |
| .end = TAHVO_INT_VBUS, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static const struct mfd_cell tahvo_devs[] = { |
| { |
| .name = "tahvo-usb", |
| .resources = tahvo_usb_res, |
| .num_resources = ARRAY_SIZE(tahvo_usb_res), |
| }, |
| }; |
| |
| static struct regmap_irq tahvo_irqs[] = { |
| [TAHVO_INT_VBUS] = { |
| .mask = 1 << TAHVO_INT_VBUS, |
| } |
| }; |
| |
| static struct regmap_irq_chip tahvo_irq_chip = { |
| .name = "TAHVO", |
| .irqs = tahvo_irqs, |
| .num_irqs = ARRAY_SIZE(tahvo_irqs), |
| .num_regs = 1, |
| .status_base = RETU_REG_IDR, |
| .mask_base = TAHVO_REG_IMR, |
| .ack_base = RETU_REG_IDR, |
| }; |
| |
| static const struct retu_data { |
| char *chip_name; |
| char *companion_name; |
| struct regmap_irq_chip *irq_chip; |
| const struct mfd_cell *children; |
| int nchildren; |
| } retu_data[] = { |
| [0] = { |
| .chip_name = "Retu", |
| .companion_name = "Vilma", |
| .irq_chip = &retu_irq_chip, |
| .children = retu_devs, |
| .nchildren = ARRAY_SIZE(retu_devs), |
| }, |
| [1] = { |
| .chip_name = "Tahvo", |
| .companion_name = "Betty", |
| .irq_chip = &tahvo_irq_chip, |
| .children = tahvo_devs, |
| .nchildren = ARRAY_SIZE(tahvo_devs), |
| } |
| }; |
| |
| int retu_read(struct retu_dev *rdev, u8 reg) |
| { |
| int ret; |
| int value; |
| |
| mutex_lock(&rdev->mutex); |
| ret = regmap_read(rdev->regmap, reg, &value); |
| mutex_unlock(&rdev->mutex); |
| |
| return ret ? ret : value; |
| } |
| EXPORT_SYMBOL_GPL(retu_read); |
| |
| int retu_write(struct retu_dev *rdev, u8 reg, u16 data) |
| { |
| int ret; |
| |
| mutex_lock(&rdev->mutex); |
| ret = regmap_write(rdev->regmap, reg, data); |
| mutex_unlock(&rdev->mutex); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(retu_write); |
| |
| static void retu_power_off(void) |
| { |
| struct retu_dev *rdev = retu_pm_power_off; |
| int reg; |
| |
| mutex_lock(&retu_pm_power_off->mutex); |
| |
| /* Ignore power button state */ |
| regmap_read(rdev->regmap, RETU_REG_CC1, ®); |
| regmap_write(rdev->regmap, RETU_REG_CC1, reg | 2); |
| |
| /* Expire watchdog immediately */ |
| regmap_write(rdev->regmap, RETU_REG_WATCHDOG, 0); |
| |
| /* Wait for poweroff */ |
| for (;;) |
| cpu_relax(); |
| |
| mutex_unlock(&retu_pm_power_off->mutex); |
| } |
| |
| static int retu_regmap_read(void *context, const void *reg, size_t reg_size, |
| void *val, size_t val_size) |
| { |
| int ret; |
| struct device *dev = context; |
| struct i2c_client *i2c = to_i2c_client(dev); |
| |
| BUG_ON(reg_size != 1 || val_size != 2); |
| |
| ret = i2c_smbus_read_word_data(i2c, *(u8 const *)reg); |
| if (ret < 0) |
| return ret; |
| |
| *(u16 *)val = ret; |
| return 0; |
| } |
| |
| static int retu_regmap_write(void *context, const void *data, size_t count) |
| { |
| u8 reg; |
| u16 val; |
| struct device *dev = context; |
| struct i2c_client *i2c = to_i2c_client(dev); |
| |
| BUG_ON(count != sizeof(reg) + sizeof(val)); |
| memcpy(®, data, sizeof(reg)); |
| memcpy(&val, data + sizeof(reg), sizeof(val)); |
| return i2c_smbus_write_word_data(i2c, reg, val); |
| } |
| |
| static struct regmap_bus retu_bus = { |
| .read = retu_regmap_read, |
| .write = retu_regmap_write, |
| .val_format_endian_default = REGMAP_ENDIAN_NATIVE, |
| }; |
| |
| static const struct regmap_config retu_config = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| }; |
| |
| static int retu_probe(struct i2c_client *i2c) |
| { |
| struct retu_data const *rdat; |
| struct retu_dev *rdev; |
| int ret; |
| |
| if (i2c->addr > ARRAY_SIZE(retu_data)) |
| return -ENODEV; |
| rdat = &retu_data[i2c->addr - 1]; |
| |
| rdev = devm_kzalloc(&i2c->dev, sizeof(*rdev), GFP_KERNEL); |
| if (rdev == NULL) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(i2c, rdev); |
| rdev->dev = &i2c->dev; |
| mutex_init(&rdev->mutex); |
| rdev->regmap = devm_regmap_init(&i2c->dev, &retu_bus, &i2c->dev, |
| &retu_config); |
| if (IS_ERR(rdev->regmap)) |
| return PTR_ERR(rdev->regmap); |
| |
| ret = retu_read(rdev, RETU_REG_ASICR); |
| if (ret < 0) { |
| dev_err(rdev->dev, "could not read %s revision: %d\n", |
| rdat->chip_name, ret); |
| return ret; |
| } |
| |
| dev_info(rdev->dev, "%s%s%s v%d.%d found\n", rdat->chip_name, |
| (ret & RETU_REG_ASICR_VILMA) ? " & " : "", |
| (ret & RETU_REG_ASICR_VILMA) ? rdat->companion_name : "", |
| (ret >> 4) & 0x7, ret & 0xf); |
| |
| /* Mask all interrupts. */ |
| ret = retu_write(rdev, rdat->irq_chip->mask_base, 0xffff); |
| if (ret < 0) |
| return ret; |
| |
| ret = regmap_add_irq_chip(rdev->regmap, i2c->irq, IRQF_ONESHOT, -1, |
| rdat->irq_chip, &rdev->irq_data); |
| if (ret < 0) |
| return ret; |
| |
| ret = mfd_add_devices(rdev->dev, -1, rdat->children, rdat->nchildren, |
| NULL, regmap_irq_chip_get_base(rdev->irq_data), |
| NULL); |
| if (ret < 0) { |
| regmap_del_irq_chip(i2c->irq, rdev->irq_data); |
| return ret; |
| } |
| |
| if (i2c->addr == 1 && !pm_power_off) { |
| retu_pm_power_off = rdev; |
| pm_power_off = retu_power_off; |
| } |
| |
| return 0; |
| } |
| |
| static void retu_remove(struct i2c_client *i2c) |
| { |
| struct retu_dev *rdev = i2c_get_clientdata(i2c); |
| |
| if (retu_pm_power_off == rdev) { |
| pm_power_off = NULL; |
| retu_pm_power_off = NULL; |
| } |
| mfd_remove_devices(rdev->dev); |
| regmap_del_irq_chip(i2c->irq, rdev->irq_data); |
| } |
| |
| static const struct i2c_device_id retu_id[] = { |
| { "retu" }, |
| { "tahvo" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, retu_id); |
| |
| static const struct of_device_id retu_of_match[] = { |
| { .compatible = "nokia,retu" }, |
| { .compatible = "nokia,tahvo" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, retu_of_match); |
| |
| static struct i2c_driver retu_driver = { |
| .driver = { |
| .name = "retu-mfd", |
| .of_match_table = retu_of_match, |
| }, |
| .probe = retu_probe, |
| .remove = retu_remove, |
| .id_table = retu_id, |
| }; |
| module_i2c_driver(retu_driver); |
| |
| MODULE_DESCRIPTION("Retu MFD driver"); |
| MODULE_AUTHOR("Juha Yrjölä"); |
| MODULE_AUTHOR("David Weinehall"); |
| MODULE_AUTHOR("Mikko Ylinen"); |
| MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); |
| MODULE_LICENSE("GPL"); |