| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2015, Sony Mobile Communications AB. |
| * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/list.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/irq.h> |
| #include <linux/irqdomain.h> |
| #include <linux/mailbox_client.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_wakeirq.h> |
| #include <linux/regmap.h> |
| #include <linux/seq_file.h> |
| #include <linux/soc/qcom/smem.h> |
| #include <linux/soc/qcom/smem_state.h> |
| #include <linux/spinlock.h> |
| |
| /* |
| * The Shared Memory Point to Point (SMP2P) protocol facilitates communication |
| * of a single 32-bit value between two processors. Each value has a single |
| * writer (the local side) and a single reader (the remote side). Values are |
| * uniquely identified in the system by the directed edge (local processor ID |
| * to remote processor ID) and a string identifier. |
| * |
| * Each processor is responsible for creating the outgoing SMEM items and each |
| * item is writable by the local processor and readable by the remote |
| * processor. By using two separate SMEM items that are single-reader and |
| * single-writer, SMP2P does not require any remote locking mechanisms. |
| * |
| * The driver uses the Linux GPIO and interrupt framework to expose a virtual |
| * GPIO for each outbound entry and a virtual interrupt controller for each |
| * inbound entry. |
| */ |
| |
| #define SMP2P_MAX_ENTRY 16 |
| #define SMP2P_MAX_ENTRY_NAME 16 |
| |
| #define SMP2P_FEATURE_SSR_ACK 0x1 |
| #define SMP2P_FLAGS_RESTART_DONE_BIT 0 |
| #define SMP2P_FLAGS_RESTART_ACK_BIT 1 |
| |
| #define SMP2P_MAGIC 0x504d5324 |
| #define SMP2P_ALL_FEATURES SMP2P_FEATURE_SSR_ACK |
| |
| /** |
| * struct smp2p_smem_item - in memory communication structure |
| * @magic: magic number |
| * @version: version - must be 1 |
| * @features: features flag - currently unused |
| * @local_pid: processor id of sending end |
| * @remote_pid: processor id of receiving end |
| * @total_entries: number of entries - always SMP2P_MAX_ENTRY |
| * @valid_entries: number of allocated entries |
| * @flags: |
| * @entries: individual communication entries |
| * @entries.name: name of the entry |
| * @entries.value: content of the entry |
| */ |
| struct smp2p_smem_item { |
| u32 magic; |
| u8 version; |
| unsigned features:24; |
| u16 local_pid; |
| u16 remote_pid; |
| u16 total_entries; |
| u16 valid_entries; |
| u32 flags; |
| |
| struct { |
| u8 name[SMP2P_MAX_ENTRY_NAME]; |
| u32 value; |
| } entries[SMP2P_MAX_ENTRY]; |
| } __packed; |
| |
| /** |
| * struct smp2p_entry - driver context matching one entry |
| * @node: list entry to keep track of allocated entries |
| * @smp2p: reference to the device driver context |
| * @name: name of the entry, to match against smp2p_smem_item |
| * @value: pointer to smp2p_smem_item entry value |
| * @last_value: last handled value |
| * @domain: irq_domain for inbound entries |
| * @irq_enabled:bitmap to track enabled irq bits |
| * @irq_rising: bitmap to mark irq bits for rising detection |
| * @irq_falling:bitmap to mark irq bits for falling detection |
| * @state: smem state handle |
| * @lock: spinlock to protect read-modify-write of the value |
| */ |
| struct smp2p_entry { |
| struct list_head node; |
| struct qcom_smp2p *smp2p; |
| |
| const char *name; |
| u32 *value; |
| u32 last_value; |
| |
| struct irq_domain *domain; |
| DECLARE_BITMAP(irq_enabled, 32); |
| DECLARE_BITMAP(irq_rising, 32); |
| DECLARE_BITMAP(irq_falling, 32); |
| |
| struct qcom_smem_state *state; |
| |
| spinlock_t lock; |
| }; |
| |
| #define SMP2P_INBOUND 0 |
| #define SMP2P_OUTBOUND 1 |
| |
| /** |
| * struct qcom_smp2p - device driver context |
| * @dev: device driver handle |
| * @in: pointer to the inbound smem item |
| * @out: pointer to the outbound smem item |
| * @smem_items: ids of the two smem items |
| * @valid_entries: already scanned inbound entries |
| * @ssr_ack_enabled: SMP2P_FEATURE_SSR_ACK feature is supported and was enabled |
| * @ssr_ack: current cached state of the local ack bit |
| * @negotiation_done: whether negotiating finished |
| * @local_pid: processor id of the inbound edge |
| * @remote_pid: processor id of the outbound edge |
| * @ipc_regmap: regmap for the outbound ipc |
| * @ipc_offset: offset within the regmap |
| * @ipc_bit: bit in regmap@offset to kick to signal remote processor |
| * @mbox_client: mailbox client handle |
| * @mbox_chan: apcs ipc mailbox channel handle |
| * @inbound: list of inbound entries |
| * @outbound: list of outbound entries |
| */ |
| struct qcom_smp2p { |
| struct device *dev; |
| |
| struct smp2p_smem_item *in; |
| struct smp2p_smem_item *out; |
| |
| unsigned smem_items[SMP2P_OUTBOUND + 1]; |
| |
| unsigned valid_entries; |
| |
| bool ssr_ack_enabled; |
| bool ssr_ack; |
| bool negotiation_done; |
| |
| unsigned local_pid; |
| unsigned remote_pid; |
| |
| struct regmap *ipc_regmap; |
| int ipc_offset; |
| int ipc_bit; |
| |
| struct mbox_client mbox_client; |
| struct mbox_chan *mbox_chan; |
| |
| struct list_head inbound; |
| struct list_head outbound; |
| }; |
| |
| static void qcom_smp2p_kick(struct qcom_smp2p *smp2p) |
| { |
| /* Make sure any updated data is written before the kick */ |
| wmb(); |
| |
| if (smp2p->mbox_chan) { |
| mbox_send_message(smp2p->mbox_chan, NULL); |
| mbox_client_txdone(smp2p->mbox_chan, 0); |
| } else { |
| regmap_write(smp2p->ipc_regmap, smp2p->ipc_offset, BIT(smp2p->ipc_bit)); |
| } |
| } |
| |
| static bool qcom_smp2p_check_ssr(struct qcom_smp2p *smp2p) |
| { |
| struct smp2p_smem_item *in = smp2p->in; |
| bool restart; |
| |
| if (!smp2p->ssr_ack_enabled) |
| return false; |
| |
| restart = in->flags & BIT(SMP2P_FLAGS_RESTART_DONE_BIT); |
| |
| return restart != smp2p->ssr_ack; |
| } |
| |
| static void qcom_smp2p_do_ssr_ack(struct qcom_smp2p *smp2p) |
| { |
| struct smp2p_smem_item *out = smp2p->out; |
| u32 val; |
| |
| smp2p->ssr_ack = !smp2p->ssr_ack; |
| |
| val = out->flags & ~BIT(SMP2P_FLAGS_RESTART_ACK_BIT); |
| if (smp2p->ssr_ack) |
| val |= BIT(SMP2P_FLAGS_RESTART_ACK_BIT); |
| out->flags = val; |
| |
| qcom_smp2p_kick(smp2p); |
| } |
| |
| static void qcom_smp2p_negotiate(struct qcom_smp2p *smp2p) |
| { |
| struct smp2p_smem_item *out = smp2p->out; |
| struct smp2p_smem_item *in = smp2p->in; |
| |
| if (in->version == out->version) { |
| out->features &= in->features; |
| |
| if (out->features & SMP2P_FEATURE_SSR_ACK) |
| smp2p->ssr_ack_enabled = true; |
| |
| smp2p->negotiation_done = true; |
| } |
| } |
| |
| static void qcom_smp2p_notify_in(struct qcom_smp2p *smp2p) |
| { |
| struct smp2p_smem_item *in; |
| struct smp2p_entry *entry; |
| int irq_pin; |
| u32 status; |
| char buf[SMP2P_MAX_ENTRY_NAME]; |
| u32 val; |
| int i; |
| |
| in = smp2p->in; |
| |
| /* Match newly created entries */ |
| for (i = smp2p->valid_entries; i < in->valid_entries; i++) { |
| list_for_each_entry(entry, &smp2p->inbound, node) { |
| memcpy(buf, in->entries[i].name, sizeof(buf)); |
| if (!strcmp(buf, entry->name)) { |
| entry->value = &in->entries[i].value; |
| break; |
| } |
| } |
| } |
| smp2p->valid_entries = i; |
| |
| /* Fire interrupts based on any value changes */ |
| list_for_each_entry(entry, &smp2p->inbound, node) { |
| /* Ignore entries not yet allocated by the remote side */ |
| if (!entry->value) |
| continue; |
| |
| val = readl(entry->value); |
| |
| status = val ^ entry->last_value; |
| entry->last_value = val; |
| |
| /* No changes of this entry? */ |
| if (!status) |
| continue; |
| |
| for_each_set_bit(i, entry->irq_enabled, 32) { |
| if (!(status & BIT(i))) |
| continue; |
| |
| if ((val & BIT(i) && test_bit(i, entry->irq_rising)) || |
| (!(val & BIT(i)) && test_bit(i, entry->irq_falling))) { |
| irq_pin = irq_find_mapping(entry->domain, i); |
| handle_nested_irq(irq_pin); |
| } |
| } |
| } |
| } |
| |
| /** |
| * qcom_smp2p_intr() - interrupt handler for incoming notifications |
| * @irq: unused |
| * @data: smp2p driver context |
| * |
| * Handle notifications from the remote side to handle newly allocated entries |
| * or any changes to the state bits of existing entries. |
| * |
| * Return: %IRQ_HANDLED |
| */ |
| static irqreturn_t qcom_smp2p_intr(int irq, void *data) |
| { |
| struct smp2p_smem_item *in; |
| struct qcom_smp2p *smp2p = data; |
| unsigned int smem_id = smp2p->smem_items[SMP2P_INBOUND]; |
| unsigned int pid = smp2p->remote_pid; |
| bool ack_restart; |
| size_t size; |
| |
| in = smp2p->in; |
| |
| /* Acquire smem item, if not already found */ |
| if (!in) { |
| in = qcom_smem_get(pid, smem_id, &size); |
| if (IS_ERR(in)) { |
| dev_err(smp2p->dev, |
| "Unable to acquire remote smp2p item\n"); |
| goto out; |
| } |
| |
| smp2p->in = in; |
| } |
| |
| if (!smp2p->negotiation_done) |
| qcom_smp2p_negotiate(smp2p); |
| |
| if (smp2p->negotiation_done) { |
| ack_restart = qcom_smp2p_check_ssr(smp2p); |
| qcom_smp2p_notify_in(smp2p); |
| |
| if (ack_restart) |
| qcom_smp2p_do_ssr_ack(smp2p); |
| } |
| |
| out: |
| return IRQ_HANDLED; |
| } |
| |
| static void smp2p_mask_irq(struct irq_data *irqd) |
| { |
| struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); |
| irq_hw_number_t irq = irqd_to_hwirq(irqd); |
| |
| clear_bit(irq, entry->irq_enabled); |
| } |
| |
| static void smp2p_unmask_irq(struct irq_data *irqd) |
| { |
| struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); |
| irq_hw_number_t irq = irqd_to_hwirq(irqd); |
| |
| set_bit(irq, entry->irq_enabled); |
| } |
| |
| static int smp2p_set_irq_type(struct irq_data *irqd, unsigned int type) |
| { |
| struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); |
| irq_hw_number_t irq = irqd_to_hwirq(irqd); |
| |
| if (!(type & IRQ_TYPE_EDGE_BOTH)) |
| return -EINVAL; |
| |
| if (type & IRQ_TYPE_EDGE_RISING) |
| set_bit(irq, entry->irq_rising); |
| else |
| clear_bit(irq, entry->irq_rising); |
| |
| if (type & IRQ_TYPE_EDGE_FALLING) |
| set_bit(irq, entry->irq_falling); |
| else |
| clear_bit(irq, entry->irq_falling); |
| |
| return 0; |
| } |
| |
| static void smp2p_irq_print_chip(struct irq_data *irqd, struct seq_file *p) |
| { |
| struct smp2p_entry *entry = irq_data_get_irq_chip_data(irqd); |
| |
| seq_printf(p, " %8s", dev_name(entry->smp2p->dev)); |
| } |
| |
| static struct irq_chip smp2p_irq_chip = { |
| .name = "smp2p", |
| .irq_mask = smp2p_mask_irq, |
| .irq_unmask = smp2p_unmask_irq, |
| .irq_set_type = smp2p_set_irq_type, |
| .irq_print_chip = smp2p_irq_print_chip, |
| }; |
| |
| static int smp2p_irq_map(struct irq_domain *d, |
| unsigned int irq, |
| irq_hw_number_t hw) |
| { |
| struct smp2p_entry *entry = d->host_data; |
| |
| irq_set_chip_and_handler(irq, &smp2p_irq_chip, handle_level_irq); |
| irq_set_chip_data(irq, entry); |
| irq_set_nested_thread(irq, 1); |
| irq_set_noprobe(irq); |
| |
| return 0; |
| } |
| |
| static const struct irq_domain_ops smp2p_irq_ops = { |
| .map = smp2p_irq_map, |
| .xlate = irq_domain_xlate_twocell, |
| }; |
| |
| static int qcom_smp2p_inbound_entry(struct qcom_smp2p *smp2p, |
| struct smp2p_entry *entry, |
| struct device_node *node) |
| { |
| entry->domain = irq_domain_add_linear(node, 32, &smp2p_irq_ops, entry); |
| if (!entry->domain) { |
| dev_err(smp2p->dev, "failed to add irq_domain\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static int smp2p_update_bits(void *data, u32 mask, u32 value) |
| { |
| struct smp2p_entry *entry = data; |
| unsigned long flags; |
| u32 orig; |
| u32 val; |
| |
| spin_lock_irqsave(&entry->lock, flags); |
| val = orig = readl(entry->value); |
| val &= ~mask; |
| val |= value; |
| writel(val, entry->value); |
| spin_unlock_irqrestore(&entry->lock, flags); |
| |
| if (val != orig) |
| qcom_smp2p_kick(entry->smp2p); |
| |
| return 0; |
| } |
| |
| static const struct qcom_smem_state_ops smp2p_state_ops = { |
| .update_bits = smp2p_update_bits, |
| }; |
| |
| static int qcom_smp2p_outbound_entry(struct qcom_smp2p *smp2p, |
| struct smp2p_entry *entry, |
| struct device_node *node) |
| { |
| struct smp2p_smem_item *out = smp2p->out; |
| char buf[SMP2P_MAX_ENTRY_NAME] = {}; |
| |
| /* Allocate an entry from the smem item */ |
| strscpy(buf, entry->name, SMP2P_MAX_ENTRY_NAME); |
| memcpy(out->entries[out->valid_entries].name, buf, SMP2P_MAX_ENTRY_NAME); |
| |
| /* Make the logical entry reference the physical value */ |
| entry->value = &out->entries[out->valid_entries].value; |
| |
| out->valid_entries++; |
| |
| entry->state = qcom_smem_state_register(node, &smp2p_state_ops, entry); |
| if (IS_ERR(entry->state)) { |
| dev_err(smp2p->dev, "failed to register qcom_smem_state\n"); |
| return PTR_ERR(entry->state); |
| } |
| |
| return 0; |
| } |
| |
| static int qcom_smp2p_alloc_outbound_item(struct qcom_smp2p *smp2p) |
| { |
| struct smp2p_smem_item *out; |
| unsigned smem_id = smp2p->smem_items[SMP2P_OUTBOUND]; |
| unsigned pid = smp2p->remote_pid; |
| int ret; |
| |
| ret = qcom_smem_alloc(pid, smem_id, sizeof(*out)); |
| if (ret < 0 && ret != -EEXIST) { |
| if (ret != -EPROBE_DEFER) |
| dev_err(smp2p->dev, |
| "unable to allocate local smp2p item\n"); |
| return ret; |
| } |
| |
| out = qcom_smem_get(pid, smem_id, NULL); |
| if (IS_ERR(out)) { |
| dev_err(smp2p->dev, "Unable to acquire local smp2p item\n"); |
| return PTR_ERR(out); |
| } |
| |
| memset(out, 0, sizeof(*out)); |
| out->magic = SMP2P_MAGIC; |
| out->local_pid = smp2p->local_pid; |
| out->remote_pid = smp2p->remote_pid; |
| out->total_entries = SMP2P_MAX_ENTRY; |
| out->valid_entries = 0; |
| out->features = SMP2P_ALL_FEATURES; |
| |
| /* |
| * Make sure the rest of the header is written before we validate the |
| * item by writing a valid version number. |
| */ |
| wmb(); |
| out->version = 1; |
| |
| qcom_smp2p_kick(smp2p); |
| |
| smp2p->out = out; |
| |
| return 0; |
| } |
| |
| static int smp2p_parse_ipc(struct qcom_smp2p *smp2p) |
| { |
| struct device_node *syscon; |
| struct device *dev = smp2p->dev; |
| const char *key; |
| int ret; |
| |
| syscon = of_parse_phandle(dev->of_node, "qcom,ipc", 0); |
| if (!syscon) { |
| dev_err(dev, "no qcom,ipc node\n"); |
| return -ENODEV; |
| } |
| |
| smp2p->ipc_regmap = syscon_node_to_regmap(syscon); |
| of_node_put(syscon); |
| if (IS_ERR(smp2p->ipc_regmap)) |
| return PTR_ERR(smp2p->ipc_regmap); |
| |
| key = "qcom,ipc"; |
| ret = of_property_read_u32_index(dev->of_node, key, 1, &smp2p->ipc_offset); |
| if (ret < 0) { |
| dev_err(dev, "no offset in %s\n", key); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32_index(dev->of_node, key, 2, &smp2p->ipc_bit); |
| if (ret < 0) { |
| dev_err(dev, "no bit in %s\n", key); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int qcom_smp2p_probe(struct platform_device *pdev) |
| { |
| struct smp2p_entry *entry; |
| struct device_node *node; |
| struct qcom_smp2p *smp2p; |
| const char *key; |
| int irq; |
| int ret; |
| |
| smp2p = devm_kzalloc(&pdev->dev, sizeof(*smp2p), GFP_KERNEL); |
| if (!smp2p) |
| return -ENOMEM; |
| |
| smp2p->dev = &pdev->dev; |
| INIT_LIST_HEAD(&smp2p->inbound); |
| INIT_LIST_HEAD(&smp2p->outbound); |
| |
| platform_set_drvdata(pdev, smp2p); |
| |
| key = "qcom,smem"; |
| ret = of_property_read_u32_array(pdev->dev.of_node, key, |
| smp2p->smem_items, 2); |
| if (ret) |
| return ret; |
| |
| key = "qcom,local-pid"; |
| ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->local_pid); |
| if (ret) |
| goto report_read_failure; |
| |
| key = "qcom,remote-pid"; |
| ret = of_property_read_u32(pdev->dev.of_node, key, &smp2p->remote_pid); |
| if (ret) |
| goto report_read_failure; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| smp2p->mbox_client.dev = &pdev->dev; |
| smp2p->mbox_client.knows_txdone = true; |
| smp2p->mbox_chan = mbox_request_channel(&smp2p->mbox_client, 0); |
| if (IS_ERR(smp2p->mbox_chan)) { |
| if (PTR_ERR(smp2p->mbox_chan) != -ENODEV) |
| return PTR_ERR(smp2p->mbox_chan); |
| |
| smp2p->mbox_chan = NULL; |
| |
| ret = smp2p_parse_ipc(smp2p); |
| if (ret) |
| return ret; |
| } |
| |
| ret = qcom_smp2p_alloc_outbound_item(smp2p); |
| if (ret < 0) |
| goto release_mbox; |
| |
| for_each_available_child_of_node(pdev->dev.of_node, node) { |
| entry = devm_kzalloc(&pdev->dev, sizeof(*entry), GFP_KERNEL); |
| if (!entry) { |
| ret = -ENOMEM; |
| of_node_put(node); |
| goto unwind_interfaces; |
| } |
| |
| entry->smp2p = smp2p; |
| spin_lock_init(&entry->lock); |
| |
| ret = of_property_read_string(node, "qcom,entry-name", &entry->name); |
| if (ret < 0) { |
| of_node_put(node); |
| goto unwind_interfaces; |
| } |
| |
| if (of_property_read_bool(node, "interrupt-controller")) { |
| ret = qcom_smp2p_inbound_entry(smp2p, entry, node); |
| if (ret < 0) { |
| of_node_put(node); |
| goto unwind_interfaces; |
| } |
| |
| list_add(&entry->node, &smp2p->inbound); |
| } else { |
| ret = qcom_smp2p_outbound_entry(smp2p, entry, node); |
| if (ret < 0) { |
| of_node_put(node); |
| goto unwind_interfaces; |
| } |
| |
| list_add(&entry->node, &smp2p->outbound); |
| } |
| } |
| |
| /* Kick the outgoing edge after allocating entries */ |
| qcom_smp2p_kick(smp2p); |
| |
| ret = devm_request_threaded_irq(&pdev->dev, irq, |
| NULL, qcom_smp2p_intr, |
| IRQF_ONESHOT, |
| NULL, (void *)smp2p); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to request interrupt\n"); |
| goto unwind_interfaces; |
| } |
| |
| /* |
| * Treat smp2p interrupt as wakeup source, but keep it disabled |
| * by default. User space can decide enabling it depending on its |
| * use cases. For example if remoteproc crashes and device wants |
| * to handle it immediatedly (e.g. to not miss phone calls) it can |
| * enable wakeup source from user space, while other devices which |
| * do not have proper autosleep feature may want to handle it with |
| * other wakeup events (e.g. Power button) instead waking up immediately. |
| */ |
| device_set_wakeup_capable(&pdev->dev, true); |
| |
| ret = dev_pm_set_wake_irq(&pdev->dev, irq); |
| if (ret) |
| goto set_wake_irq_fail; |
| |
| return 0; |
| |
| set_wake_irq_fail: |
| dev_pm_clear_wake_irq(&pdev->dev); |
| |
| unwind_interfaces: |
| list_for_each_entry(entry, &smp2p->inbound, node) |
| irq_domain_remove(entry->domain); |
| |
| list_for_each_entry(entry, &smp2p->outbound, node) |
| qcom_smem_state_unregister(entry->state); |
| |
| smp2p->out->valid_entries = 0; |
| |
| release_mbox: |
| mbox_free_channel(smp2p->mbox_chan); |
| |
| return ret; |
| |
| report_read_failure: |
| dev_err(&pdev->dev, "failed to read %s\n", key); |
| return -EINVAL; |
| } |
| |
| static void qcom_smp2p_remove(struct platform_device *pdev) |
| { |
| struct qcom_smp2p *smp2p = platform_get_drvdata(pdev); |
| struct smp2p_entry *entry; |
| |
| dev_pm_clear_wake_irq(&pdev->dev); |
| |
| list_for_each_entry(entry, &smp2p->inbound, node) |
| irq_domain_remove(entry->domain); |
| |
| list_for_each_entry(entry, &smp2p->outbound, node) |
| qcom_smem_state_unregister(entry->state); |
| |
| mbox_free_channel(smp2p->mbox_chan); |
| |
| smp2p->out->valid_entries = 0; |
| } |
| |
| static const struct of_device_id qcom_smp2p_of_match[] = { |
| { .compatible = "qcom,smp2p" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_smp2p_of_match); |
| |
| static struct platform_driver qcom_smp2p_driver = { |
| .probe = qcom_smp2p_probe, |
| .remove_new = qcom_smp2p_remove, |
| .driver = { |
| .name = "qcom_smp2p", |
| .of_match_table = qcom_smp2p_of_match, |
| }, |
| }; |
| module_platform_driver(qcom_smp2p_driver); |
| |
| MODULE_DESCRIPTION("Qualcomm Shared Memory Point to Point driver"); |
| MODULE_LICENSE("GPL v2"); |