| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Samsung Exynos USB HOST EHCI Controller |
| * |
| * Copyright (C) 2011 Samsung Electronics Co.Ltd |
| * Author: Jingoo Han <jg1.han@samsung.com> |
| * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| |
| #include "ehci.h" |
| |
| #define DRIVER_DESC "EHCI Exynos driver" |
| |
| #define EHCI_INSNREG00(base) (base + 0x90) |
| #define EHCI_INSNREG00_ENA_INCR16 (0x1 << 25) |
| #define EHCI_INSNREG00_ENA_INCR8 (0x1 << 24) |
| #define EHCI_INSNREG00_ENA_INCR4 (0x1 << 23) |
| #define EHCI_INSNREG00_ENA_INCRX_ALIGN (0x1 << 22) |
| #define EHCI_INSNREG00_ENABLE_DMA_BURST \ |
| (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ |
| EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) |
| |
| static struct hc_driver __read_mostly exynos_ehci_hc_driver; |
| |
| #define PHY_NUMBER 3 |
| |
| struct exynos_ehci_hcd { |
| struct clk *clk; |
| struct device_node *of_node; |
| struct phy *phy[PHY_NUMBER]; |
| bool legacy_phy; |
| }; |
| |
| #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv) |
| |
| static int exynos_ehci_get_phy(struct device *dev, |
| struct exynos_ehci_hcd *exynos_ehci) |
| { |
| struct device_node *child; |
| struct phy *phy; |
| int phy_number, num_phys; |
| int ret; |
| |
| /* Get PHYs for the controller */ |
| num_phys = of_count_phandle_with_args(dev->of_node, "phys", |
| "#phy-cells"); |
| for (phy_number = 0; phy_number < num_phys; phy_number++) { |
| phy = devm_of_phy_get_by_index(dev, dev->of_node, phy_number); |
| if (IS_ERR(phy)) |
| return PTR_ERR(phy); |
| exynos_ehci->phy[phy_number] = phy; |
| } |
| if (num_phys > 0) |
| return 0; |
| |
| /* Get PHYs using legacy bindings */ |
| for_each_available_child_of_node(dev->of_node, child) { |
| ret = of_property_read_u32(child, "reg", &phy_number); |
| if (ret) { |
| dev_err(dev, "Failed to parse device tree\n"); |
| of_node_put(child); |
| return ret; |
| } |
| |
| if (phy_number >= PHY_NUMBER) { |
| dev_err(dev, "Invalid number of PHYs\n"); |
| of_node_put(child); |
| return -EINVAL; |
| } |
| |
| phy = devm_of_phy_optional_get(dev, child, NULL); |
| exynos_ehci->phy[phy_number] = phy; |
| if (IS_ERR(phy)) { |
| of_node_put(child); |
| return PTR_ERR(phy); |
| } |
| } |
| |
| exynos_ehci->legacy_phy = true; |
| return 0; |
| } |
| |
| static int exynos_ehci_phy_enable(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); |
| int i; |
| int ret = 0; |
| |
| for (i = 0; ret == 0 && i < PHY_NUMBER; i++) |
| ret = phy_power_on(exynos_ehci->phy[i]); |
| if (ret) |
| for (i--; i >= 0; i--) |
| phy_power_off(exynos_ehci->phy[i]); |
| |
| return ret; |
| } |
| |
| static void exynos_ehci_phy_disable(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); |
| int i; |
| |
| for (i = 0; i < PHY_NUMBER; i++) |
| phy_power_off(exynos_ehci->phy[i]); |
| } |
| |
| static void exynos_setup_vbus_gpio(struct device *dev) |
| { |
| struct gpio_desc *gpio; |
| int err; |
| |
| gpio = devm_gpiod_get_optional(dev, "samsung,vbus", GPIOD_OUT_HIGH); |
| err = PTR_ERR_OR_ZERO(gpio); |
| if (err) |
| dev_err(dev, "can't request ehci vbus gpio: %d\n", err); |
| } |
| |
| static int exynos_ehci_probe(struct platform_device *pdev) |
| { |
| struct exynos_ehci_hcd *exynos_ehci; |
| struct usb_hcd *hcd; |
| struct ehci_hcd *ehci; |
| struct resource *res; |
| int irq; |
| int err; |
| |
| /* |
| * Right now device-tree probed devices don't get dma_mask set. |
| * Since shared usb code relies on it, set it here for now. |
| * Once we move to full device tree support this will vanish off. |
| */ |
| err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) |
| return err; |
| |
| exynos_setup_vbus_gpio(&pdev->dev); |
| |
| hcd = usb_create_hcd(&exynos_ehci_hc_driver, |
| &pdev->dev, dev_name(&pdev->dev)); |
| if (!hcd) { |
| dev_err(&pdev->dev, "Unable to create HCD\n"); |
| return -ENOMEM; |
| } |
| exynos_ehci = to_exynos_ehci(hcd); |
| |
| err = exynos_ehci_get_phy(&pdev->dev, exynos_ehci); |
| if (err) |
| goto fail_io; |
| |
| exynos_ehci->clk = devm_clk_get_enabled(&pdev->dev, "usbhost"); |
| |
| if (IS_ERR(exynos_ehci->clk)) { |
| dev_err(&pdev->dev, "Failed to get usbhost clock\n"); |
| err = PTR_ERR(exynos_ehci->clk); |
| goto fail_io; |
| } |
| |
| hcd->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
| if (IS_ERR(hcd->regs)) { |
| err = PTR_ERR(hcd->regs); |
| goto fail_io; |
| } |
| |
| hcd->rsrc_start = res->start; |
| hcd->rsrc_len = resource_size(res); |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| err = irq; |
| goto fail_io; |
| } |
| |
| err = exynos_ehci_phy_enable(&pdev->dev); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to enable USB phy\n"); |
| goto fail_io; |
| } |
| |
| ehci = hcd_to_ehci(hcd); |
| ehci->caps = hcd->regs; |
| |
| /* |
| * Workaround: reset of_node pointer to avoid conflict between legacy |
| * Exynos EHCI port subnodes and generic USB device bindings |
| */ |
| exynos_ehci->of_node = pdev->dev.of_node; |
| if (exynos_ehci->legacy_phy) |
| pdev->dev.of_node = NULL; |
| |
| /* DMA burst Enable */ |
| writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); |
| |
| err = usb_add_hcd(hcd, irq, IRQF_SHARED); |
| if (err) { |
| dev_err(&pdev->dev, "Failed to add USB HCD\n"); |
| goto fail_add_hcd; |
| } |
| device_wakeup_enable(hcd->self.controller); |
| |
| platform_set_drvdata(pdev, hcd); |
| |
| return 0; |
| |
| fail_add_hcd: |
| exynos_ehci_phy_disable(&pdev->dev); |
| pdev->dev.of_node = exynos_ehci->of_node; |
| fail_io: |
| usb_put_hcd(hcd); |
| return err; |
| } |
| |
| static void exynos_ehci_remove(struct platform_device *pdev) |
| { |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); |
| struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); |
| |
| pdev->dev.of_node = exynos_ehci->of_node; |
| |
| usb_remove_hcd(hcd); |
| |
| exynos_ehci_phy_disable(&pdev->dev); |
| |
| usb_put_hcd(hcd); |
| } |
| |
| static int exynos_ehci_suspend(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); |
| |
| bool do_wakeup = device_may_wakeup(dev); |
| int rc; |
| |
| rc = ehci_suspend(hcd, do_wakeup); |
| if (rc) |
| return rc; |
| |
| exynos_ehci_phy_disable(dev); |
| |
| clk_disable_unprepare(exynos_ehci->clk); |
| |
| return rc; |
| } |
| |
| static int exynos_ehci_resume(struct device *dev) |
| { |
| struct usb_hcd *hcd = dev_get_drvdata(dev); |
| struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd); |
| int ret; |
| |
| ret = clk_prepare_enable(exynos_ehci->clk); |
| if (ret) |
| return ret; |
| |
| ret = exynos_ehci_phy_enable(dev); |
| if (ret) { |
| dev_err(dev, "Failed to enable USB phy\n"); |
| clk_disable_unprepare(exynos_ehci->clk); |
| return ret; |
| } |
| |
| /* DMA burst Enable */ |
| writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs)); |
| |
| ehci_resume(hcd, false); |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(exynos_ehci_pm_ops, |
| exynos_ehci_suspend, exynos_ehci_resume); |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id exynos_ehci_match[] = { |
| { .compatible = "samsung,exynos4210-ehci" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, exynos_ehci_match); |
| #endif |
| |
| static struct platform_driver exynos_ehci_driver = { |
| .probe = exynos_ehci_probe, |
| .remove_new = exynos_ehci_remove, |
| .shutdown = usb_hcd_platform_shutdown, |
| .driver = { |
| .name = "exynos-ehci", |
| .pm = pm_ptr(&exynos_ehci_pm_ops), |
| .of_match_table = of_match_ptr(exynos_ehci_match), |
| } |
| }; |
| static const struct ehci_driver_overrides exynos_overrides __initconst = { |
| .extra_priv_size = sizeof(struct exynos_ehci_hcd), |
| }; |
| |
| static int __init ehci_exynos_init(void) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides); |
| return platform_driver_register(&exynos_ehci_driver); |
| } |
| module_init(ehci_exynos_init); |
| |
| static void __exit ehci_exynos_cleanup(void) |
| { |
| platform_driver_unregister(&exynos_ehci_driver); |
| } |
| module_exit(ehci_exynos_cleanup); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_ALIAS("platform:exynos-ehci"); |
| MODULE_AUTHOR("Jingoo Han"); |
| MODULE_AUTHOR("Joonyoung Shim"); |
| MODULE_LICENSE("GPL v2"); |