drivers/usb/host/ohci-sm501.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-1.0+
 /*
  * OHCI HCD (Host Controller Driver) for USB.
  *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2005 David Brownell
  * (C) Copyright 2002 Hewlett-Packard Company
  * (C) Copyright 2008 Magnus Damm
  *
  * SM501 Bus Glue - based on ohci-omap.c
  *
  * This file is licenced under the GPL.
  */

 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/sm501.h>
 #include <linux/sm501-regs.h>

 static int ohci_sm501_init(struct usb_hcd *hcd)
 {
 	return ohci_init(hcd_to_ohci(hcd));
 }

 static int ohci_sm501_start(struct usb_hcd *hcd)
 {
 	struct device *dev = hcd->self.controller;
 	int ret;

 	ret = ohci_run(hcd_to_ohci(hcd));
 	if (ret < 0) {
 		dev_err(dev, "can't start %s", hcd->self.bus_name);
 		ohci_stop(hcd);
 	}

 	return ret;
 }

 /*-------------------------------------------------------------------------*/

 static const struct hc_driver ohci_sm501_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"SM501 OHCI",
 	.hcd_priv_size =	sizeof(struct ohci_hcd),

 	/*
 	 * generic hardware linkage
 	 */
 	.irq =			ohci_irq,
 	.flags =		HCD_USB11 | HCD_MEMORY,

 	/*
 	 * basic lifecycle operations
 	 */
 	.reset =		ohci_sm501_init,
 	.start =		ohci_sm501_start,
 	.stop =			ohci_stop,
 	.shutdown =		ohci_shutdown,

 	/*
 	 * managing i/o requests and associated device resources
 	 */
 	.urb_enqueue =		ohci_urb_enqueue,
 	.urb_dequeue =		ohci_urb_dequeue,
 	.endpoint_disable =	ohci_endpoint_disable,

 	/*
 	 * scheduling support
 	 */
 	.get_frame_number =	ohci_get_frame,

 	/*
 	 * root hub support
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
 #endif
 	.start_port_reset =	ohci_start_port_reset,
 };

 /*-------------------------------------------------------------------------*/

 static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
 {
 	const struct hc_driver *driver = &ohci_sm501_hc_driver;
 	struct device *dev = &pdev->dev;
 	struct resource	*res, *mem;
 	int retval, irq;
 	struct usb_hcd *hcd = NULL;

 	irq = retval = platform_get_irq(pdev, 0);
 	if (retval < 0)
 		goto err0;

 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (mem == NULL) {
 		dev_err(dev, "no resource definition for memory\n");
 		retval = -ENOENT;
 		goto err0;
 	}

 	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
 		dev_err(dev, "request_mem_region failed\n");
 		retval = -EBUSY;
 		goto err0;
 	}

 	/* allocate, reserve and remap resources for registers */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(dev, "no resource definition for registers\n");
 		retval = -ENOENT;
 		goto err1;
 	}

 	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 	if (!hcd) {
 		retval = -ENOMEM;
 		goto err1;
 	}

 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);

 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,	pdev->name)) {
 		dev_err(dev, "request_mem_region failed\n");
 		retval = -EBUSY;
 		goto err3;
 	}

 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (hcd->regs == NULL) {
 		dev_err(dev, "cannot remap registers\n");
 		retval = -ENXIO;
 		goto err4;
 	}

 	ohci_hcd_init(hcd_to_ohci(hcd));

 	/* The sm501 chip is equipped with local memory that may be used
 	 * by on-chip devices such as the video controller and the usb host.
 	 * This driver uses genalloc so that usb allocations with
 	 * gen_pool_dma_alloc() allocate from this local memory. The dma_handle
 	 * returned by gen_pool_dma_alloc() will be an offset starting from 0
 	 * for the first local memory byte.
 	 *
 	 * So as long as data is allocated using gen_pool_dma_alloc() all is
 	 * fine. This is however not always the case - buffers may be allocated
 	 * using kmalloc() - so the usb core needs to be told that it must copy
 	 * data into our local memory if the buffers happen to be placed in
 	 * regular memory. A non-null hcd->localmem_pool initialized by
 	 * the call to usb_hcd_setup_local_mem() below does just that.
 	 */

 	retval = usb_hcd_setup_local_mem(hcd, mem->start,
 					 mem->start - mem->parent->start,
 					 resource_size(mem));
 	if (retval < 0)
 		goto err5;
 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval)
 		goto err5;
 	device_wakeup_enable(hcd->self.controller);

 	/* enable power and unmask interrupts */

 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
 	sm501_modify_reg(dev->parent, SM501_IRQ_MASK, 1 << 6, 0);

 	return 0;
 err5:
 	iounmap(hcd->regs);
 err4:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 err3:
 	usb_put_hcd(hcd);
 err1:
 	release_mem_region(mem->start, resource_size(mem));
 err0:
 	return retval;
 }

 static void ohci_hcd_sm501_drv_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct resource	*mem;

 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	release_mem_region(mem->start, resource_size(mem));

 	/* mask interrupts and disable power */

 	sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6);
 	sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0);
 }

 /*-------------------------------------------------------------------------*/

 #ifdef CONFIG_PM
 static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
 {
 	struct device *dev = &pdev->dev;
 	struct usb_hcd  *hcd = platform_get_drvdata(pdev);
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
 	bool do_wakeup = device_may_wakeup(dev);
 	int ret;

 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;

 	ret = ohci_suspend(hcd, do_wakeup);
 	if (ret)
 		return ret;

 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
 	return ret;
 }

 static int ohci_sm501_resume(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
 	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);

 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
 	ohci->next_statechange = jiffies;

 	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
 	ohci_resume(hcd, false);
 	return 0;
 }
 #else
 #define ohci_sm501_suspend NULL
 #define ohci_sm501_resume NULL
 #endif

 /*-------------------------------------------------------------------------*/

 /*
  * Driver definition to register with the SM501 bus
  */
 static struct platform_driver ohci_hcd_sm501_driver = {
 	.probe		= ohci_hcd_sm501_drv_probe,
 	.remove_new	= ohci_hcd_sm501_drv_remove,
 	.shutdown	= usb_hcd_platform_shutdown,
 	.suspend	= ohci_sm501_suspend,
 	.resume		= ohci_sm501_resume,
 	.driver		= {
 		.name	= "sm501-usb",
 	},
 };
 MODULE_ALIAS("platform:sm501-usb");
	// SPDX-License-Identifier: GPL-1.0+
	/*
	* OHCI HCD (Host Controller Driver) for USB.
	*
	* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
	* (C) Copyright 2000-2005 David Brownell
	* (C) Copyright 2002 Hewlett-Packard Company
	* (C) Copyright 2008 Magnus Damm
	*
	* SM501 Bus Glue - based on ohci-omap.c
	*
	* This file is licenced under the GPL.
	*/

	#include <linux/interrupt.h>
	#include <linux/jiffies.h>
	#include <linux/platform_device.h>
	#include <linux/dma-mapping.h>
	#include <linux/sm501.h>
	#include <linux/sm501-regs.h>

	static int ohci_sm501_init(struct usb_hcd *hcd)
	{
	return ohci_init(hcd_to_ohci(hcd));
	}

	static int ohci_sm501_start(struct usb_hcd *hcd)
	{
	struct device *dev = hcd->self.controller;
	int ret;

	ret = ohci_run(hcd_to_ohci(hcd));
	if (ret < 0) {
	dev_err(dev, "can't start %s", hcd->self.bus_name);
	ohci_stop(hcd);
	}

	return ret;
	}

	/-------------------------------------------------------------------------/

	static const struct hc_driver ohci_sm501_hc_driver = {
	.description = hcd_name,
	.product_desc = "SM501 OHCI",
	.hcd_priv_size = sizeof(struct ohci_hcd),

	/*
	* generic hardware linkage
	*/
	.irq = ohci_irq,
	.flags = HCD_USB11 \| HCD_MEMORY,

	/*
	* basic lifecycle operations
	*/
	.reset = ohci_sm501_init,
	.start = ohci_sm501_start,
	.stop = ohci_stop,
	.shutdown = ohci_shutdown,

	/*
	* managing i/o requests and associated device resources
	*/
	.urb_enqueue = ohci_urb_enqueue,
	.urb_dequeue = ohci_urb_dequeue,
	.endpoint_disable = ohci_endpoint_disable,

	/*
	* scheduling support
	*/
	.get_frame_number = ohci_get_frame,

	/*
	* root hub support
	*/
	.hub_status_data = ohci_hub_status_data,
	.hub_control = ohci_hub_control,
	#ifdef CONFIG_PM
	.bus_suspend = ohci_bus_suspend,
	.bus_resume = ohci_bus_resume,
	#endif
	.start_port_reset = ohci_start_port_reset,
	};

	/-------------------------------------------------------------------------/

	static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev)
	{
	const struct hc_driver *driver = &ohci_sm501_hc_driver;
	struct device *dev = &pdev->dev;
	struct resource res, mem;
	int retval, irq;
	struct usb_hcd *hcd = NULL;

	irq = retval = platform_get_irq(pdev, 0);
	if (retval < 0)
	goto err0;

	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (mem == NULL) {
	dev_err(dev, "no resource definition for memory\n");
	retval = -ENOENT;
	goto err0;
	}

	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
	dev_err(dev, "request_mem_region failed\n");
	retval = -EBUSY;
	goto err0;
	}

	/* allocate, reserve and remap resources for registers */
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (res == NULL) {
	dev_err(dev, "no resource definition for registers\n");
	retval = -ENOENT;
	goto err1;
	}

	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
	if (!hcd) {
	retval = -ENOMEM;
	goto err1;
	}

	hcd->rsrc_start = res->start;
	hcd->rsrc_len = resource_size(res);

	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, pdev->name)) {
	dev_err(dev, "request_mem_region failed\n");
	retval = -EBUSY;
	goto err3;
	}

	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
	if (hcd->regs == NULL) {
	dev_err(dev, "cannot remap registers\n");
	retval = -ENXIO;
	goto err4;
	}

	ohci_hcd_init(hcd_to_ohci(hcd));

	/* The sm501 chip is equipped with local memory that may be used
	* by on-chip devices such as the video controller and the usb host.
	* This driver uses genalloc so that usb allocations with
	* gen_pool_dma_alloc() allocate from this local memory. The dma_handle
	* returned by gen_pool_dma_alloc() will be an offset starting from 0
	* for the first local memory byte.
	*
	* So as long as data is allocated using gen_pool_dma_alloc() all is
	* fine. This is however not always the case - buffers may be allocated
	* using kmalloc() - so the usb core needs to be told that it must copy
	* data into our local memory if the buffers happen to be placed in
	* regular memory. A non-null hcd->localmem_pool initialized by
	* the call to usb_hcd_setup_local_mem() below does just that.
	*/

	retval = usb_hcd_setup_local_mem(hcd, mem->start,
	mem->start - mem->parent->start,
	resource_size(mem));
	if (retval < 0)
	goto err5;
	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
	if (retval)
	goto err5;
	device_wakeup_enable(hcd->self.controller);

	/* enable power and unmask interrupts */

	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
	sm501_modify_reg(dev->parent, SM501_IRQ_MASK, 1 << 6, 0);

	return 0;
	err5:
	iounmap(hcd->regs);
	err4:
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	err3:
	usb_put_hcd(hcd);
	err1:
	release_mem_region(mem->start, resource_size(mem));
	err0:
	return retval;
	}

	static void ohci_hcd_sm501_drv_remove(struct platform_device *pdev)
	{
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct resource *mem;

	usb_remove_hcd(hcd);
	iounmap(hcd->regs);
	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
	usb_put_hcd(hcd);
	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	release_mem_region(mem->start, resource_size(mem));

	/* mask interrupts and disable power */

	sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6);
	sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0);
	}

	/-------------------------------------------------------------------------/

	#ifdef CONFIG_PM
	static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg)
	{
	struct device *dev = &pdev->dev;
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
	bool do_wakeup = device_may_wakeup(dev);
	int ret;

	if (time_before(jiffies, ohci->next_statechange))
	msleep(5);
	ohci->next_statechange = jiffies;

	ret = ohci_suspend(hcd, do_wakeup);
	if (ret)
	return ret;

	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0);
	return ret;
	}

	static int ohci_sm501_resume(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct usb_hcd *hcd = platform_get_drvdata(pdev);
	struct ohci_hcd *ohci = hcd_to_ohci(hcd);

	if (time_before(jiffies, ohci->next_statechange))
	msleep(5);
	ohci->next_statechange = jiffies;

	sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1);
	ohci_resume(hcd, false);
	return 0;
	}
	#else
	#define ohci_sm501_suspend NULL
	#define ohci_sm501_resume NULL
	#endif

	/-------------------------------------------------------------------------/

	/*
	* Driver definition to register with the SM501 bus
	*/
	static struct platform_driver ohci_hcd_sm501_driver = {
	.probe = ohci_hcd_sm501_drv_probe,
	.remove_new = ohci_hcd_sm501_drv_remove,
	.shutdown = usb_hcd_platform_shutdown,
	.suspend = ohci_sm501_suspend,
	.resume = ohci_sm501_resume,
	.driver = {
	.name = "sm501-usb",
	},
	};
	MODULE_ALIAS("platform:sm501-usb");