| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2024 NXP |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/pwm/pwm.h> |
| #include "imx95.dtsi" |
| |
| / { |
| model = "NXP i.MX95 19X19 board"; |
| compatible = "fsl,imx95-19x19-evk", "fsl,imx95"; |
| |
| aliases { |
| mmc0 = &usdhc1; |
| mmc1 = &usdhc2; |
| serial0 = &lpuart1; |
| }; |
| |
| bt_sco_codec: audio-codec-bt-sco { |
| #sound-dai-cells = <1>; |
| compatible = "linux,bt-sco"; |
| }; |
| |
| chosen { |
| stdout-path = &lpuart1; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0x0 0x80000000 0 0x80000000>; |
| }; |
| |
| fan0: pwm-fan { |
| compatible = "pwm-fan"; |
| #cooling-cells = <2>; |
| pwms = <&tpm6 2 4000000 PWM_POLARITY_INVERTED>; |
| cooling-levels = <64 128 192 255>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| linux_cma: linux,cma { |
| compatible = "shared-dma-pool"; |
| alloc-ranges = <0 0x80000000 0 0x7f000000>; |
| size = <0 0x3c000000>; |
| linux,cma-default; |
| reusable; |
| }; |
| }; |
| |
| reg_3p3v: regulator-3p3v { |
| compatible = "regulator-fixed"; |
| regulator-max-microvolt = <3300000>; |
| regulator-min-microvolt = <3300000>; |
| regulator-name = "+V3.3_SW"; |
| }; |
| |
| reg_audio_pwr: regulator-audio-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "audio-pwr"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&i2c4_gpio_expander_21 1 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| |
| reg_audio_slot: regulator-audio-slot { |
| compatible = "regulator-fixed"; |
| regulator-name = "audio-wm8962"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&i2c4_gpio_expander_21 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-always-on; |
| status = "disabled"; |
| }; |
| |
| reg_m2_pwr: regulator-m2-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "M.2-power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_pcie0: regulator-pcie { |
| compatible = "regulator-fixed"; |
| regulator-name = "PCIE_WLAN_EN"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| vin-supply = <®_m2_pwr>; |
| gpio = <&i2c7_pcal6524 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_slot_pwr: regulator-slot-pwr { |
| compatible = "regulator-fixed"; |
| regulator-name = "PCIe slot-power"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&i2c7_pcal6524 14 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| regulator-name = "VDD_SD2_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| off-on-delay-us = <12000>; |
| }; |
| |
| sound-bt-sco { |
| compatible = "simple-audio-card"; |
| simple-audio-card,name = "bt-sco-audio"; |
| simple-audio-card,format = "dsp_a"; |
| simple-audio-card,bitclock-inversion; |
| simple-audio-card,frame-master = <&btcpu>; |
| simple-audio-card,bitclock-master = <&btcpu>; |
| |
| btcpu: simple-audio-card,cpu { |
| sound-dai = <&sai1>; |
| dai-tdm-slot-num = <2>; |
| dai-tdm-slot-width = <16>; |
| }; |
| |
| simple-audio-card,codec { |
| sound-dai = <&bt_sco_codec 1>; |
| }; |
| }; |
| |
| sound-micfil { |
| compatible = "fsl,imx-audio-card"; |
| model = "micfil-audio"; |
| |
| pri-dai-link { |
| link-name = "micfil hifi"; |
| format = "i2s"; |
| cpu { |
| sound-dai = <&micfil>; |
| }; |
| }; |
| }; |
| |
| sound-wm8962 { |
| compatible = "fsl,imx-audio-wm8962"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hp>; |
| model = "wm8962-audio"; |
| audio-cpu = <&sai3>; |
| audio-codec = <&wm8962>; |
| hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| audio-routing = "Headphone Jack", "HPOUTL", |
| "Headphone Jack", "HPOUTR", |
| "Ext Spk", "SPKOUTL", |
| "Ext Spk", "SPKOUTR", |
| "AMIC", "MICBIAS", |
| "IN3R", "AMIC", |
| "IN1R", "AMIC"; |
| }; |
| }; |
| |
| &flexspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexspi1>; |
| status = "okay"; |
| |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| reg = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexspi1_reset>; |
| reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| spi-max-frequency = <200000000>; |
| spi-tx-bus-width = <8>; |
| spi-rx-bus-width = <8>; |
| }; |
| }; |
| |
| &lpi2c4 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c4>; |
| status = "okay"; |
| |
| wm8962: audio-codec@1a { |
| compatible = "wlf,wm8962"; |
| reg = <0x1a>; |
| clocks = <&scmi_clk IMX95_CLK_SAI3>; |
| DCVDD-supply = <®_audio_pwr>; |
| DBVDD-supply = <®_audio_pwr>; |
| AVDD-supply = <®_audio_pwr>; |
| CPVDD-supply = <®_audio_pwr>; |
| MICVDD-supply = <®_audio_pwr>; |
| PLLVDD-supply = <®_audio_pwr>; |
| SPKVDD1-supply = <®_audio_pwr>; |
| SPKVDD2-supply = <®_audio_pwr>; |
| gpio-cfg = < 0x0000 /* 0:Default */ |
| 0x0000 /* 1:Default */ |
| 0x0000 /* 2:FN_DMICCLK */ |
| 0x0000 /* 3:Default */ |
| 0x0000 /* 4:FN_DMICCDAT */ |
| 0x0000 /* 5:Default */ |
| >; |
| }; |
| |
| i2c4_gpio_expander_21: gpio@21 { |
| compatible = "nxp,pcal6408"; |
| reg = <0x21>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <18 IRQ_TYPE_LEVEL_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4_pcal6408>; |
| vcc-supply = <®_3p3v>; |
| }; |
| }; |
| |
| &lpi2c7 { |
| clock-frequency = <1000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lpi2c7>; |
| status = "okay"; |
| |
| i2c7_pcal6524: i2c7-gpio@22 { |
| compatible = "nxp,pcal6524"; |
| reg = <0x22>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c7_pcal6524>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &lpuart1 { |
| /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| &micfil { |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pdm>; |
| assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&scmi_clk IMX95_CLK_PDM>; |
| assigned-clock-parents = <0>, <0>, <0>, <0>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>; |
| assigned-clock-rates = <3932160000>, |
| <3612672000>, <393216000>, |
| <361267200>, <49152000>; |
| status = "okay"; |
| }; |
| |
| &mu7 { |
| status = "okay"; |
| }; |
| |
| &pcie0 { |
| pinctrl-0 = <&pinctrl_pcie0>; |
| pinctrl-names = "default"; |
| reset-gpio = <&i2c7_pcal6524 5 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_pcie0>; |
| status = "okay"; |
| }; |
| |
| &pcie1 { |
| pinctrl-0 = <&pinctrl_pcie1>; |
| pinctrl-names = "default"; |
| reset-gpio = <&i2c7_pcal6524 16 GPIO_ACTIVE_LOW>; |
| vpcie-supply = <®_slot_pwr>; |
| status = "okay"; |
| }; |
| |
| &sai1 { |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai1>; |
| assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&scmi_clk IMX95_CLK_SAI1>; |
| assigned-clock-parents = <0>, <0>, <0>, <0>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>; |
| assigned-clock-rates = <3932160000>, |
| <3612672000>, <393216000>, |
| <361267200>, <12288000>; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| }; |
| |
| &sai3 { |
| #sound-dai-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai3>; |
| assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL2>, |
| <&scmi_clk IMX95_CLK_SAI3>; |
| assigned-clock-parents = <0>, <0>, <0>, <0>, |
| <&scmi_clk IMX95_CLK_AUDIOPLL1>; |
| assigned-clock-rates = <3932160000>, |
| <3612672000>, <393216000>, |
| <361267200>, <12288000>; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz>; |
| pinctrl-3 = <&pinctrl_usdhc1>; |
| bus-width = <8>; |
| non-removable; |
| no-sdio; |
| no-sd; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &wdog3 { |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &scmi_iomuxc { |
| pinctrl_flexspi1: flexspi1grp { |
| fsl,pins = < |
| IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B 0x3fe |
| IMX95_PAD_XSPI1_SCLK__FLEXSPI1_A_SCLK 0x3fe |
| IMX95_PAD_XSPI1_DQS__FLEXSPI1_A_DQS 0x3fe |
| IMX95_PAD_XSPI1_DATA0__FLEXSPI1_A_DATA_BIT0 0x3fe |
| IMX95_PAD_XSPI1_DATA1__FLEXSPI1_A_DATA_BIT1 0x3fe |
| IMX95_PAD_XSPI1_DATA2__FLEXSPI1_A_DATA_BIT2 0x3fe |
| IMX95_PAD_XSPI1_DATA3__FLEXSPI1_A_DATA_BIT3 0x3fe |
| IMX95_PAD_XSPI1_DATA4__FLEXSPI1_A_DATA_BIT4 0x3fe |
| IMX95_PAD_XSPI1_DATA5__FLEXSPI1_A_DATA_BIT5 0x3fe |
| IMX95_PAD_XSPI1_DATA6__FLEXSPI1_A_DATA_BIT6 0x3fe |
| IMX95_PAD_XSPI1_DATA7__FLEXSPI1_A_DATA_BIT7 0x3fe |
| >; |
| }; |
| |
| pinctrl_flexspi1_reset: flexspi1-reset-grp { |
| fsl,pins = < |
| IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11 0x3fe |
| >; |
| }; |
| |
| pinctrl_hp: hpgrp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO11__GPIO2_IO_BIT11 0x31e |
| >; |
| }; |
| |
| pinctrl_i2c4_pcal6408: i2c4pcal6498grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18 0x31e |
| >; |
| }; |
| |
| pinctrl_i2c7_pcal6524: i2c7pcal6524grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO36__GPIO5_IO_BIT16 0x31e |
| >; |
| }; |
| |
| pinctrl_lpi2c4: lpi2c4grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO30__LPI2C4_SDA 0x40000b9e |
| IMX95_PAD_GPIO_IO31__LPI2C4_SCL 0x40000b9e |
| >; |
| }; |
| |
| pinctrl_lpi2c7: lpi2c7grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO08__LPI2C7_SDA 0x40000b9e |
| IMX95_PAD_GPIO_IO09__LPI2C7_SCL 0x40000b9e |
| >; |
| }; |
| |
| pinctrl_pcie0: pcie0grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B 0x4000031e |
| >; |
| }; |
| |
| pinctrl_pcie1: pcie1grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO35__HSIOMIX_TOP_PCIE2_CLKREQ_B 0x4000031e |
| >; |
| }; |
| |
| pinctrl_pdm: pdmgrp { |
| fsl,pins = < |
| IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK 0x31e |
| IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_sai1: sai1grp { |
| fsl,pins = < |
| IMX95_PAD_SAI1_RXD0__AONMIX_TOP_SAI1_RX_DATA_BIT0 0x31e |
| IMX95_PAD_SAI1_TXC__AONMIX_TOP_SAI1_TX_BCLK 0x31e |
| IMX95_PAD_SAI1_TXFS__AONMIX_TOP_SAI1_TX_SYNC 0x31e |
| IMX95_PAD_SAI1_TXD0__AONMIX_TOP_SAI1_TX_DATA_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_SAI2_RX_BCLK 0x31e |
| IMX95_PAD_ENET2_MDC__NETCMIX_TOP_SAI2_RX_SYNC 0x31e |
| IMX95_PAD_ENET2_TD3__NETCMIX_TOP_SAI2_RX_DATA_BIT0 0x31e |
| IMX95_PAD_ENET2_TD2__NETCMIX_TOP_SAI2_RX_DATA_BIT1 0x31e |
| IMX95_PAD_ENET2_TXC__NETCMIX_TOP_SAI2_TX_BCLK 0x31e |
| IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_SAI2_TX_SYNC 0x31e |
| IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_SAI2_TX_DATA_BIT0 0x31e |
| IMX95_PAD_ENET2_RXC__NETCMIX_TOP_SAI2_TX_DATA_BIT1 0x31e |
| IMX95_PAD_ENET2_RD0__NETCMIX_TOP_SAI2_TX_DATA_BIT2 0x31e |
| IMX95_PAD_ENET2_RD1__NETCMIX_TOP_SAI2_TX_DATA_BIT3 0x31e |
| IMX95_PAD_ENET2_RD2__NETCMIX_TOP_SAI2_MCLK 0x31e |
| >; |
| }; |
| |
| pinctrl_sai3: sai3grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO17__SAI3_MCLK 0x31e |
| IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK 0x31e |
| IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC 0x31e |
| IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0 0x31e |
| IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_tpm6: tpm6grp { |
| fsl,pins = < |
| IMX95_PAD_GPIO_IO19__TPM6_CH2 0x51e |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX 0x31e |
| IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX 0x31e |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e |
| IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e |
| IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e |
| IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e |
| IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e |
| IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e |
| IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e |
| IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e |
| IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e |
| IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e |
| IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD1_CLK__USDHC1_CLK 0x158e |
| IMX95_PAD_SD1_CMD__USDHC1_CMD 0x138e |
| IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x138e |
| IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x138e |
| IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x138e |
| IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x138e |
| IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x138e |
| IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x138e |
| IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x138e |
| IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x138e |
| IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x158e |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD1_CLK__USDHC1_CLK 0x15fe |
| IMX95_PAD_SD1_CMD__USDHC1_CMD 0x13fe |
| IMX95_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe |
| IMX95_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe |
| IMX95_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe |
| IMX95_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe |
| IMX95_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe |
| IMX95_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe |
| IMX95_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe |
| IMX95_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe |
| IMX95_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe |
| >; |
| }; |
| |
| pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7 0x31e |
| >; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2gpiogrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0 0x31e |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e |
| IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e |
| IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e |
| IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e |
| IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e |
| IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e |
| IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e |
| >; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CLK__USDHC2_CLK 0x158e |
| IMX95_PAD_SD2_CMD__USDHC2_CMD 0x138e |
| IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x138e |
| IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x138e |
| IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x138e |
| IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x138e |
| IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e |
| >; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = < |
| IMX95_PAD_SD2_CLK__USDHC2_CLK 0x15fe |
| IMX95_PAD_SD2_CMD__USDHC2_CMD 0x13fe |
| IMX95_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe |
| IMX95_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe |
| IMX95_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe |
| IMX95_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe |
| IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e |
| >; |
| }; |
| }; |
| |
| &thermal_zones { |
| a55-thermal { |
| trips { |
| atrip2: trip2 { |
| temperature = <55000>; |
| hysteresis = <2000>; |
| type = "active"; |
| }; |
| |
| atrip3: trip3 { |
| temperature = <65000>; |
| hysteresis = <2000>; |
| type = "active"; |
| }; |
| |
| atrip4: trip4 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "active"; |
| }; |
| }; |
| |
| cooling-maps { |
| map1 { |
| trip = <&atrip2>; |
| cooling-device = <&fan0 0 1>; |
| }; |
| |
| map2 { |
| trip = <&atrip3>; |
| cooling-device = <&fan0 1 2>; |
| }; |
| |
| map3 { |
| trip = <&atrip4>; |
| cooling-device = <&fan0 2 3>; |
| }; |
| }; |
| }; |
| }; |
| |
| &tpm6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tpm6>; |
| status = "okay"; |
| }; |
