| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * R-Car Gen3 THS thermal sensor driver |
| * Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen. |
| * |
| * Copyright (C) 2016 Renesas Electronics Corporation. |
| * Copyright (C) 2016 Sang Engineering |
| */ |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/sys_soc.h> |
| #include <linux/thermal.h> |
| |
| #include "thermal_core.h" |
| #include "thermal_hwmon.h" |
| |
| /* Register offsets */ |
| #define REG_GEN3_IRQSTR 0x04 |
| #define REG_GEN3_IRQMSK 0x08 |
| #define REG_GEN3_IRQCTL 0x0C |
| #define REG_GEN3_IRQEN 0x10 |
| #define REG_GEN3_IRQTEMP1 0x14 |
| #define REG_GEN3_IRQTEMP2 0x18 |
| #define REG_GEN3_IRQTEMP3 0x1C |
| #define REG_GEN3_CTSR 0x20 |
| #define REG_GEN3_THCTR 0x20 |
| #define REG_GEN3_TEMP 0x28 |
| #define REG_GEN3_THCODE1 0x50 |
| #define REG_GEN3_THCODE2 0x54 |
| #define REG_GEN3_THCODE3 0x58 |
| |
| /* IRQ{STR,MSK,EN} bits */ |
| #define IRQ_TEMP1 BIT(0) |
| #define IRQ_TEMP2 BIT(1) |
| #define IRQ_TEMP3 BIT(2) |
| #define IRQ_TEMPD1 BIT(3) |
| #define IRQ_TEMPD2 BIT(4) |
| #define IRQ_TEMPD3 BIT(5) |
| |
| /* CTSR bits */ |
| #define CTSR_PONM BIT(8) |
| #define CTSR_AOUT BIT(7) |
| #define CTSR_THBGR BIT(5) |
| #define CTSR_VMEN BIT(4) |
| #define CTSR_VMST BIT(1) |
| #define CTSR_THSST BIT(0) |
| |
| /* THCTR bits */ |
| #define THCTR_PONM BIT(6) |
| #define THCTR_THSST BIT(0) |
| |
| #define CTEMP_MASK 0xFFF |
| |
| #define MCELSIUS(temp) ((temp) * 1000) |
| #define GEN3_FUSE_MASK 0xFFF |
| |
| #define TSC_MAX_NUM 3 |
| |
| /* default THCODE values if FUSEs are missing */ |
| static const int thcodes[TSC_MAX_NUM][3] = { |
| { 3397, 2800, 2221 }, |
| { 3393, 2795, 2216 }, |
| { 3389, 2805, 2237 }, |
| }; |
| |
| /* Structure for thermal temperature calculation */ |
| struct equation_coefs { |
| int a1; |
| int b1; |
| int a2; |
| int b2; |
| }; |
| |
| struct rcar_gen3_thermal_tsc { |
| void __iomem *base; |
| struct thermal_zone_device *zone; |
| struct equation_coefs coef; |
| int tj_t; |
| int id; /* thermal channel id */ |
| }; |
| |
| struct rcar_gen3_thermal_priv { |
| struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; |
| unsigned int num_tscs; |
| void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc); |
| }; |
| |
| static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc, |
| u32 reg) |
| { |
| return ioread32(tsc->base + reg); |
| } |
| |
| static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc, |
| u32 reg, u32 data) |
| { |
| iowrite32(data, tsc->base + reg); |
| } |
| |
| /* |
| * Linear approximation for temperature |
| * |
| * [reg] = [temp] * a + b => [temp] = ([reg] - b) / a |
| * |
| * The constants a and b are calculated using two triplets of int values PTAT |
| * and THCODE. PTAT and THCODE can either be read from hardware or use hard |
| * coded values from driver. The formula to calculate a and b are taken from |
| * BSP and sparsely documented and understood. |
| * |
| * Examining the linear formula and the formula used to calculate constants a |
| * and b while knowing that the span for PTAT and THCODE values are between |
| * 0x000 and 0xfff the largest integer possible is 0xfff * 0xfff == 0xffe001. |
| * Integer also needs to be signed so that leaves 7 bits for binary |
| * fixed point scaling. |
| */ |
| |
| #define FIXPT_SHIFT 7 |
| #define FIXPT_INT(_x) ((_x) << FIXPT_SHIFT) |
| #define INT_FIXPT(_x) ((_x) >> FIXPT_SHIFT) |
| #define FIXPT_DIV(_a, _b) DIV_ROUND_CLOSEST(((_a) << FIXPT_SHIFT), (_b)) |
| #define FIXPT_TO_MCELSIUS(_x) ((_x) * 1000 >> FIXPT_SHIFT) |
| |
| #define RCAR3_THERMAL_GRAN 500 /* mili Celsius */ |
| |
| /* no idea where these constants come from */ |
| #define TJ_3 -41 |
| |
| static void rcar_gen3_thermal_calc_coefs(struct rcar_gen3_thermal_tsc *tsc, |
| int *ptat, const int *thcode, |
| int ths_tj_1) |
| { |
| /* TODO: Find documentation and document constant calculation formula */ |
| |
| /* |
| * Division is not scaled in BSP and if scaled it might overflow |
| * the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled |
| */ |
| tsc->tj_t = (FIXPT_INT((ptat[1] - ptat[2]) * (ths_tj_1 - TJ_3)) |
| / (ptat[0] - ptat[2])) + FIXPT_INT(TJ_3); |
| |
| tsc->coef.a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]), |
| tsc->tj_t - FIXPT_INT(TJ_3)); |
| tsc->coef.b1 = FIXPT_INT(thcode[2]) - tsc->coef.a1 * TJ_3; |
| |
| tsc->coef.a2 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[0]), |
| tsc->tj_t - FIXPT_INT(ths_tj_1)); |
| tsc->coef.b2 = FIXPT_INT(thcode[0]) - tsc->coef.a2 * ths_tj_1; |
| } |
| |
| static int rcar_gen3_thermal_round(int temp) |
| { |
| int result, round_offs; |
| |
| round_offs = temp >= 0 ? RCAR3_THERMAL_GRAN / 2 : |
| -RCAR3_THERMAL_GRAN / 2; |
| result = (temp + round_offs) / RCAR3_THERMAL_GRAN; |
| return result * RCAR3_THERMAL_GRAN; |
| } |
| |
| static int rcar_gen3_thermal_get_temp(void *devdata, int *temp) |
| { |
| struct rcar_gen3_thermal_tsc *tsc = devdata; |
| int mcelsius, val; |
| int reg; |
| |
| /* Read register and convert to mili Celsius */ |
| reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; |
| |
| if (reg <= thcodes[tsc->id][1]) |
| val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, |
| tsc->coef.a1); |
| else |
| val = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2, |
| tsc->coef.a2); |
| mcelsius = FIXPT_TO_MCELSIUS(val); |
| |
| /* Guaranteed operating range is -40C to 125C. */ |
| |
| /* Round value to device granularity setting */ |
| *temp = rcar_gen3_thermal_round(mcelsius); |
| |
| return 0; |
| } |
| |
| static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc, |
| int mcelsius) |
| { |
| int celsius, val; |
| |
| celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); |
| if (celsius <= INT_FIXPT(tsc->tj_t)) |
| val = celsius * tsc->coef.a1 + tsc->coef.b1; |
| else |
| val = celsius * tsc->coef.a2 + tsc->coef.b2; |
| |
| return INT_FIXPT(val); |
| } |
| |
| static int rcar_gen3_thermal_update_range(struct rcar_gen3_thermal_tsc *tsc) |
| { |
| int temperature, low, high; |
| |
| rcar_gen3_thermal_get_temp(tsc, &temperature); |
| |
| low = temperature - MCELSIUS(1); |
| high = temperature + MCELSIUS(1); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, |
| rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, |
| rcar_gen3_thermal_mcelsius_to_temp(tsc, high)); |
| |
| return 0; |
| } |
| |
| static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = { |
| .get_temp = rcar_gen3_thermal_get_temp, |
| }; |
| |
| static void rcar_thermal_irq_set(struct rcar_gen3_thermal_priv *priv, bool on) |
| { |
| unsigned int i; |
| u32 val = on ? IRQ_TEMPD1 | IRQ_TEMP2 : 0; |
| |
| for (i = 0; i < priv->num_tscs; i++) |
| rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQMSK, val); |
| } |
| |
| static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data) |
| { |
| struct rcar_gen3_thermal_priv *priv = data; |
| u32 status; |
| int i; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR); |
| rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0); |
| if (status) { |
| rcar_gen3_thermal_update_range(priv->tscs[i]); |
| thermal_zone_device_update(priv->tscs[i]->zone, |
| THERMAL_EVENT_UNSPECIFIED); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct soc_device_attribute r8a7795es1[] = { |
| { .soc_id = "r8a7795", .revision = "ES1.*" }, |
| { /* sentinel */ } |
| }; |
| |
| static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc) |
| { |
| rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_THBGR); |
| rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, 0x0); |
| |
| usleep_range(1000, 2000); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_PONM); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F); |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, |
| CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN); |
| |
| usleep_range(100, 200); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, |
| CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN | |
| CTSR_VMST | CTSR_THSST); |
| |
| usleep_range(1000, 2000); |
| } |
| |
| static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc) |
| { |
| u32 reg_val; |
| |
| reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); |
| reg_val &= ~THCTR_PONM; |
| rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); |
| |
| usleep_range(1000, 2000); |
| |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0); |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); |
| rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2); |
| |
| reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); |
| reg_val |= THCTR_THSST; |
| rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); |
| |
| usleep_range(1000, 2000); |
| } |
| |
| static const int rcar_gen3_ths_tj_1 = 126; |
| static const int rcar_gen3_ths_tj_1_m3_w = 116; |
| static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { |
| { |
| .compatible = "renesas,r8a774a1-thermal", |
| .data = &rcar_gen3_ths_tj_1_m3_w, |
| }, |
| { |
| .compatible = "renesas,r8a774b1-thermal", |
| .data = &rcar_gen3_ths_tj_1, |
| }, |
| { |
| .compatible = "renesas,r8a774e1-thermal", |
| .data = &rcar_gen3_ths_tj_1, |
| }, |
| { |
| .compatible = "renesas,r8a7795-thermal", |
| .data = &rcar_gen3_ths_tj_1, |
| }, |
| { |
| .compatible = "renesas,r8a7796-thermal", |
| .data = &rcar_gen3_ths_tj_1_m3_w, |
| }, |
| { |
| .compatible = "renesas,r8a77961-thermal", |
| .data = &rcar_gen3_ths_tj_1_m3_w, |
| }, |
| { |
| .compatible = "renesas,r8a77965-thermal", |
| .data = &rcar_gen3_ths_tj_1, |
| }, |
| { |
| .compatible = "renesas,r8a77980-thermal", |
| .data = &rcar_gen3_ths_tj_1, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids); |
| |
| static int rcar_gen3_thermal_remove(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); |
| |
| rcar_thermal_irq_set(priv, false); |
| |
| pm_runtime_put(dev); |
| pm_runtime_disable(dev); |
| |
| return 0; |
| } |
| |
| static void rcar_gen3_hwmon_action(void *data) |
| { |
| struct thermal_zone_device *zone = data; |
| |
| thermal_remove_hwmon_sysfs(zone); |
| } |
| |
| static int rcar_gen3_thermal_probe(struct platform_device *pdev) |
| { |
| struct rcar_gen3_thermal_priv *priv; |
| struct device *dev = &pdev->dev; |
| const int *ths_tj_1 = of_device_get_match_data(dev); |
| struct resource *res; |
| struct thermal_zone_device *zone; |
| int ret, irq, i; |
| char *irqname; |
| |
| /* default values if FUSEs are missing */ |
| /* TODO: Read values from hardware on supported platforms */ |
| int ptat[3] = { 2631, 1509, 435 }; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->thermal_init = rcar_gen3_thermal_init; |
| if (soc_device_match(r8a7795es1)) |
| priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| /* |
| * Request 2 (of the 3 possible) IRQs, the driver only needs to |
| * to trigger on the low and high trip points of the current |
| * temp window at this point. |
| */ |
| for (i = 0; i < 2; i++) { |
| irq = platform_get_irq(pdev, i); |
| if (irq < 0) |
| return irq; |
| |
| irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d", |
| dev_name(dev), i); |
| if (!irqname) |
| return -ENOMEM; |
| |
| ret = devm_request_threaded_irq(dev, irq, NULL, |
| rcar_gen3_thermal_irq, |
| IRQF_ONESHOT, irqname, priv); |
| if (ret) |
| return ret; |
| } |
| |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| |
| for (i = 0; i < TSC_MAX_NUM; i++) { |
| struct rcar_gen3_thermal_tsc *tsc; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, i); |
| if (!res) |
| break; |
| |
| tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL); |
| if (!tsc) { |
| ret = -ENOMEM; |
| goto error_unregister; |
| } |
| |
| tsc->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(tsc->base)) { |
| ret = PTR_ERR(tsc->base); |
| goto error_unregister; |
| } |
| tsc->id = i; |
| |
| priv->tscs[i] = tsc; |
| |
| priv->thermal_init(tsc); |
| rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1); |
| |
| zone = devm_thermal_zone_of_sensor_register(dev, i, tsc, |
| &rcar_gen3_tz_of_ops); |
| if (IS_ERR(zone)) { |
| dev_err(dev, "Can't register thermal zone\n"); |
| ret = PTR_ERR(zone); |
| goto error_unregister; |
| } |
| tsc->zone = zone; |
| |
| tsc->zone->tzp->no_hwmon = false; |
| ret = thermal_add_hwmon_sysfs(tsc->zone); |
| if (ret) |
| goto error_unregister; |
| |
| ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone); |
| if (ret) |
| goto error_unregister; |
| |
| ret = of_thermal_get_ntrips(tsc->zone); |
| if (ret < 0) |
| goto error_unregister; |
| |
| rcar_gen3_thermal_update_range(tsc); |
| |
| dev_info(dev, "TSC%d: Loaded %d trip points\n", i, ret); |
| } |
| |
| priv->num_tscs = i; |
| |
| if (!priv->num_tscs) { |
| ret = -ENODEV; |
| goto error_unregister; |
| } |
| |
| rcar_thermal_irq_set(priv, true); |
| |
| return 0; |
| |
| error_unregister: |
| rcar_gen3_thermal_remove(pdev); |
| |
| return ret; |
| } |
| |
| static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev) |
| { |
| struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); |
| |
| rcar_thermal_irq_set(priv, false); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev) |
| { |
| struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); |
| unsigned int i; |
| |
| for (i = 0; i < priv->num_tscs; i++) { |
| struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; |
| |
| priv->thermal_init(tsc); |
| rcar_gen3_thermal_update_range(tsc); |
| } |
| |
| rcar_thermal_irq_set(priv, true); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, rcar_gen3_thermal_suspend, |
| rcar_gen3_thermal_resume); |
| |
| static struct platform_driver rcar_gen3_thermal_driver = { |
| .driver = { |
| .name = "rcar_gen3_thermal", |
| .pm = &rcar_gen3_thermal_pm_ops, |
| .of_match_table = rcar_gen3_thermal_dt_ids, |
| }, |
| .probe = rcar_gen3_thermal_probe, |
| .remove = rcar_gen3_thermal_remove, |
| }; |
| module_platform_driver(rcar_gen3_thermal_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver"); |
| MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>"); |