| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2016, Linaro Ltd. |
| * Copyright (c) 2015, Sony Mobile Communications Inc. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/rpmsg.h> |
| #include <linux/of.h> |
| |
| #include <linux/soc/qcom/wcnss_ctrl.h> |
| #include <linux/platform_device.h> |
| |
| #include <net/bluetooth/bluetooth.h> |
| #include <net/bluetooth/hci_core.h> |
| |
| #include "btqca.h" |
| |
| struct btqcomsmd { |
| struct hci_dev *hdev; |
| |
| struct rpmsg_endpoint *acl_channel; |
| struct rpmsg_endpoint *cmd_channel; |
| }; |
| |
| static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type, |
| const void *data, size_t count) |
| { |
| struct sk_buff *skb; |
| |
| /* Use GFP_ATOMIC as we're in IRQ context */ |
| skb = bt_skb_alloc(count, GFP_ATOMIC); |
| if (!skb) { |
| hdev->stat.err_rx++; |
| return -ENOMEM; |
| } |
| |
| hci_skb_pkt_type(skb) = type; |
| skb_put_data(skb, data, count); |
| |
| return hci_recv_frame(hdev, skb); |
| } |
| |
| static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data, |
| int count, void *priv, u32 addr) |
| { |
| struct btqcomsmd *btq = priv; |
| |
| btq->hdev->stat.byte_rx += count; |
| return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count); |
| } |
| |
| static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data, |
| int count, void *priv, u32 addr) |
| { |
| struct btqcomsmd *btq = priv; |
| |
| btq->hdev->stat.byte_rx += count; |
| return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count); |
| } |
| |
| static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb) |
| { |
| struct btqcomsmd *btq = hci_get_drvdata(hdev); |
| int ret; |
| |
| switch (hci_skb_pkt_type(skb)) { |
| case HCI_ACLDATA_PKT: |
| ret = rpmsg_send(btq->acl_channel, skb->data, skb->len); |
| if (ret) { |
| hdev->stat.err_tx++; |
| break; |
| } |
| hdev->stat.acl_tx++; |
| hdev->stat.byte_tx += skb->len; |
| break; |
| case HCI_COMMAND_PKT: |
| ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len); |
| if (ret) { |
| hdev->stat.err_tx++; |
| break; |
| } |
| hdev->stat.cmd_tx++; |
| hdev->stat.byte_tx += skb->len; |
| break; |
| default: |
| ret = -EILSEQ; |
| break; |
| } |
| |
| if (!ret) |
| kfree_skb(skb); |
| |
| return ret; |
| } |
| |
| static int btqcomsmd_open(struct hci_dev *hdev) |
| { |
| return 0; |
| } |
| |
| static int btqcomsmd_close(struct hci_dev *hdev) |
| { |
| return 0; |
| } |
| |
| static int btqcomsmd_setup(struct hci_dev *hdev) |
| { |
| struct sk_buff *skb; |
| |
| skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); |
| if (IS_ERR(skb)) |
| return PTR_ERR(skb); |
| kfree_skb(skb); |
| |
| /* Devices do not have persistent storage for BD address. Retrieve |
| * it from the firmware node property. |
| */ |
| set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); |
| |
| return 0; |
| } |
| |
| static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr) |
| { |
| int ret; |
| |
| ret = qca_set_bdaddr_rome(hdev, bdaddr); |
| if (ret) |
| return ret; |
| |
| /* The firmware stops responding for a while after setting the bdaddr, |
| * causing timeouts for subsequent commands. Sleep a bit to avoid this. |
| */ |
| usleep_range(1000, 10000); |
| return 0; |
| } |
| |
| static int btqcomsmd_probe(struct platform_device *pdev) |
| { |
| struct btqcomsmd *btq; |
| struct hci_dev *hdev; |
| void *wcnss; |
| int ret; |
| |
| btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL); |
| if (!btq) |
| return -ENOMEM; |
| |
| wcnss = dev_get_drvdata(pdev->dev.parent); |
| |
| btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL", |
| btqcomsmd_acl_callback, btq); |
| if (IS_ERR(btq->acl_channel)) |
| return PTR_ERR(btq->acl_channel); |
| |
| btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD", |
| btqcomsmd_cmd_callback, btq); |
| if (IS_ERR(btq->cmd_channel)) { |
| ret = PTR_ERR(btq->cmd_channel); |
| goto destroy_acl_channel; |
| } |
| |
| hdev = hci_alloc_dev(); |
| if (!hdev) { |
| ret = -ENOMEM; |
| goto destroy_cmd_channel; |
| } |
| |
| hci_set_drvdata(hdev, btq); |
| btq->hdev = hdev; |
| SET_HCIDEV_DEV(hdev, &pdev->dev); |
| |
| hdev->bus = HCI_SMD; |
| hdev->open = btqcomsmd_open; |
| hdev->close = btqcomsmd_close; |
| hdev->send = btqcomsmd_send; |
| hdev->setup = btqcomsmd_setup; |
| hdev->set_bdaddr = btqcomsmd_set_bdaddr; |
| |
| ret = hci_register_dev(hdev); |
| if (ret < 0) |
| goto hci_free_dev; |
| |
| platform_set_drvdata(pdev, btq); |
| |
| return 0; |
| |
| hci_free_dev: |
| hci_free_dev(hdev); |
| destroy_cmd_channel: |
| rpmsg_destroy_ept(btq->cmd_channel); |
| destroy_acl_channel: |
| rpmsg_destroy_ept(btq->acl_channel); |
| |
| return ret; |
| } |
| |
| static void btqcomsmd_remove(struct platform_device *pdev) |
| { |
| struct btqcomsmd *btq = platform_get_drvdata(pdev); |
| |
| hci_unregister_dev(btq->hdev); |
| hci_free_dev(btq->hdev); |
| |
| rpmsg_destroy_ept(btq->cmd_channel); |
| rpmsg_destroy_ept(btq->acl_channel); |
| } |
| |
| static const struct of_device_id btqcomsmd_of_match[] = { |
| { .compatible = "qcom,wcnss-bt", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, btqcomsmd_of_match); |
| |
| static struct platform_driver btqcomsmd_driver = { |
| .probe = btqcomsmd_probe, |
| .remove = btqcomsmd_remove, |
| .driver = { |
| .name = "btqcomsmd", |
| .of_match_table = btqcomsmd_of_match, |
| }, |
| }; |
| |
| module_platform_driver(btqcomsmd_driver); |
| |
| MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>"); |
| MODULE_DESCRIPTION("Qualcomm SMD HCI driver"); |
| MODULE_LICENSE("GPL v2"); |