| # SPDX-License-Identifier: GPL-2.0-only |
| |
| config CLK_BCM2711_DVP |
| tristate "Broadcom BCM2711 DVP support" |
| depends on ARCH_BCM2835 ||COMPILE_TEST |
| depends on COMMON_CLK |
| default ARCH_BCM2835 |
| select RESET_CONTROLLER |
| select RESET_SIMPLE |
| help |
| Enable common clock framework support for the Broadcom BCM2711 |
| DVP Controller. |
| |
| config CLK_BCM2835 |
| bool "Broadcom BCM2835 clock support" |
| depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST |
| depends on COMMON_CLK |
| default ARCH_BCM2835 || ARCH_BRCMSTB |
| help |
| Enable common clock framework support for Broadcom BCM2835 |
| SoCs. |
| |
| config CLK_BCM_63XX |
| bool "Broadcom BCM63xx clock support" |
| depends on ARCH_BCMBCA || COMPILE_TEST |
| select COMMON_CLK_IPROC |
| default ARCH_BCMBCA |
| help |
| Enable common clock framework support for Broadcom BCM63xx DSL SoCs |
| based on the ARM architecture |
| |
| config CLK_BCM_63XX_GATE |
| bool "Broadcom BCM63xx gated clock support" |
| depends on BMIPS_GENERIC || COMPILE_TEST |
| default BMIPS_GENERIC |
| help |
| Enable common clock framework support for Broadcom BCM63xx DSL SoCs |
| based on the MIPS architecture |
| |
| config CLK_BCM63268_TIMER |
| bool "Broadcom BCM63268 timer clock and reset support" |
| depends on BMIPS_GENERIC || COMPILE_TEST |
| default BMIPS_GENERIC |
| select RESET_CONTROLLER |
| help |
| Enable timer clock and reset support for Broadcom BCM63268 DSL SoCs |
| based on the MIPS architecture. |
| |
| config CLK_BCM_KONA |
| bool "Broadcom Kona CCU clock support" |
| depends on ARCH_BCM_MOBILE || COMPILE_TEST |
| default ARCH_BCM_MOBILE |
| help |
| Enable common clock framework support for Broadcom SoCs |
| using "Kona" style clock control units, including those |
| in the BCM281xx and BCM21664 families. |
| |
| config COMMON_CLK_IPROC |
| bool |
| help |
| Enable common clock framework support for Broadcom SoCs |
| based on the iProc architecture |
| |
| config CLK_BCM_CYGNUS |
| bool "Broadcom Cygnus clock support" |
| depends on ARCH_BCM_CYGNUS || COMPILE_TEST |
| select COMMON_CLK_IPROC |
| default ARCH_BCM_CYGNUS |
| help |
| Enable common clock framework support for the Broadcom Cygnus SoC |
| |
| config CLK_BCM_HR2 |
| bool "Broadcom Hurricane 2 clock support" |
| depends on ARCH_BCM_HR2 || COMPILE_TEST |
| select COMMON_CLK_IPROC |
| default ARCH_BCM_HR2 |
| help |
| Enable common clock framework support for the Broadcom Hurricane 2 |
| SoC |
| |
| config CLK_BCM_NSP |
| bool "Broadcom Northstar/Northstar Plus clock support" |
| depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST |
| select COMMON_CLK_IPROC |
| default ARCH_BCM_5301X || ARCH_BCM_NSP |
| help |
| Enable common clock framework support for the Broadcom Northstar and |
| Northstar Plus SoCs |
| |
| config CLK_BCM_NS2 |
| bool "Broadcom Northstar 2 clock support" |
| depends on ARCH_BCM_IPROC || COMPILE_TEST |
| select COMMON_CLK_IPROC |
| default ARCH_BCM_IPROC |
| help |
| Enable common clock framework support for the Broadcom Northstar 2 SoC |
| |
| config CLK_BCM_SR |
| bool "Broadcom Stingray clock support" |
| depends on ARCH_BCM_IPROC || COMPILE_TEST |
| select COMMON_CLK_IPROC |
| default ARCH_BCM_IPROC |
| help |
| Enable common clock framework support for the Broadcom Stingray SoC |
| |
| config CLK_RASPBERRYPI |
| tristate "Raspberry Pi firmware based clock support" |
| depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) |
| help |
| Enable common clock framework support for Raspberry Pi's firmware |
| dependent clocks |
