| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * drivers/extcon/extcon-adc-jack.c |
| * |
| * Analog Jack extcon driver with ADC-based detection capability. |
| * |
| * Copyright (C) 2016 Samsung Electronics |
| * Chanwoo Choi <cw00.choi@samsung.com> |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * MyungJoo Ham <myungjoo.ham@samsung.com> |
| * |
| * Modified for calling to IIO to get adc by <anish.singh@samsung.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| #include <linux/iio/consumer.h> |
| #include <linux/extcon/extcon-adc-jack.h> |
| #include <linux/extcon-provider.h> |
| |
| /** |
| * struct adc_jack_data - internal data for adc_jack device driver |
| * @dev: The device structure associated with the adc_jack. |
| * @edev: extcon device. |
| * @cable_names: list of supported cables. |
| * @adc_conditions: list of adc value conditions. |
| * @num_conditions: size of adc_conditions. |
| * @irq: irq number of attach/detach event (0 if not exist). |
| * @handling_delay: interrupt handler will schedule extcon event |
| * handling at handling_delay jiffies. |
| * @handler: extcon event handler called by interrupt handler. |
| * @chan: iio channel being queried. |
| * @wakeup_source: Indicates if the device can wake up the system. |
| */ |
| struct adc_jack_data { |
| struct device *dev; |
| struct extcon_dev *edev; |
| |
| const unsigned int **cable_names; |
| struct adc_jack_cond *adc_conditions; |
| int num_conditions; |
| |
| int irq; |
| unsigned long handling_delay; /* in jiffies */ |
| struct delayed_work handler; |
| |
| struct iio_channel *chan; |
| bool wakeup_source; |
| }; |
| |
| static void adc_jack_handler(struct work_struct *work) |
| { |
| struct adc_jack_data *data = container_of(to_delayed_work(work), |
| struct adc_jack_data, |
| handler); |
| struct adc_jack_cond *def; |
| int ret, adc_val; |
| int i; |
| |
| ret = iio_read_channel_raw(data->chan, &adc_val); |
| if (ret < 0) { |
| dev_err(data->dev, "read channel() error: %d\n", ret); |
| return; |
| } |
| |
| /* Get state from adc value with adc_conditions */ |
| for (i = 0; i < data->num_conditions; i++) { |
| def = &data->adc_conditions[i]; |
| if (def->min_adc <= adc_val && def->max_adc >= adc_val) { |
| extcon_set_state_sync(data->edev, def->id, true); |
| return; |
| } |
| } |
| |
| /* Set the detached state if adc value is not included in the range */ |
| for (i = 0; i < data->num_conditions; i++) { |
| def = &data->adc_conditions[i]; |
| extcon_set_state_sync(data->edev, def->id, false); |
| } |
| } |
| |
| static irqreturn_t adc_jack_irq_thread(int irq, void *_data) |
| { |
| struct adc_jack_data *data = _data; |
| |
| queue_delayed_work(system_power_efficient_wq, |
| &data->handler, data->handling_delay); |
| return IRQ_HANDLED; |
| } |
| |
| static int adc_jack_probe(struct platform_device *pdev) |
| { |
| struct adc_jack_data *data; |
| struct adc_jack_pdata *pdata = dev_get_platdata(&pdev->dev); |
| int i, err = 0; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| if (!pdata->cable_names) { |
| dev_err(&pdev->dev, "error: cable_names not defined.\n"); |
| return -EINVAL; |
| } |
| |
| data->dev = &pdev->dev; |
| data->edev = devm_extcon_dev_allocate(&pdev->dev, pdata->cable_names); |
| if (IS_ERR(data->edev)) { |
| dev_err(&pdev->dev, "failed to allocate extcon device\n"); |
| return -ENOMEM; |
| } |
| |
| if (!pdata->adc_conditions) { |
| dev_err(&pdev->dev, "error: adc_conditions not defined.\n"); |
| return -EINVAL; |
| } |
| data->adc_conditions = pdata->adc_conditions; |
| |
| /* Check the length of array and set num_conditions */ |
| for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++); |
| data->num_conditions = i; |
| |
| data->chan = devm_iio_channel_get(&pdev->dev, pdata->consumer_channel); |
| if (IS_ERR(data->chan)) |
| return PTR_ERR(data->chan); |
| |
| data->handling_delay = msecs_to_jiffies(pdata->handling_delay_ms); |
| data->wakeup_source = pdata->wakeup_source; |
| |
| INIT_DEFERRABLE_WORK(&data->handler, adc_jack_handler); |
| |
| platform_set_drvdata(pdev, data); |
| |
| err = devm_extcon_dev_register(&pdev->dev, data->edev); |
| if (err) |
| return err; |
| |
| data->irq = platform_get_irq(pdev, 0); |
| if (data->irq < 0) |
| return -ENODEV; |
| |
| err = request_any_context_irq(data->irq, adc_jack_irq_thread, |
| pdata->irq_flags, pdata->name, data); |
| |
| if (err < 0) { |
| dev_err(&pdev->dev, "error: irq %d\n", data->irq); |
| return err; |
| } |
| |
| if (data->wakeup_source) |
| device_init_wakeup(&pdev->dev, 1); |
| |
| adc_jack_handler(&data->handler.work); |
| return 0; |
| } |
| |
| static void adc_jack_remove(struct platform_device *pdev) |
| { |
| struct adc_jack_data *data = platform_get_drvdata(pdev); |
| |
| free_irq(data->irq, data); |
| cancel_work_sync(&data->handler.work); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int adc_jack_suspend(struct device *dev) |
| { |
| struct adc_jack_data *data = dev_get_drvdata(dev); |
| |
| cancel_delayed_work_sync(&data->handler); |
| if (device_may_wakeup(data->dev)) |
| enable_irq_wake(data->irq); |
| |
| return 0; |
| } |
| |
| static int adc_jack_resume(struct device *dev) |
| { |
| struct adc_jack_data *data = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(data->dev)) |
| disable_irq_wake(data->irq); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static SIMPLE_DEV_PM_OPS(adc_jack_pm_ops, |
| adc_jack_suspend, adc_jack_resume); |
| |
| static struct platform_driver adc_jack_driver = { |
| .probe = adc_jack_probe, |
| .remove = adc_jack_remove, |
| .driver = { |
| .name = "adc-jack", |
| .pm = &adc_jack_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(adc_jack_driver); |
| |
| MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>"); |
| MODULE_DESCRIPTION("ADC Jack extcon driver"); |
| MODULE_LICENSE("GPL v2"); |