| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/bitops.h> |
| #include <linux/cleanup.h> |
| #include <linux/device.h> |
| #include <linux/idr.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kdev_t.h> |
| #include <linux/kstrtox.h> |
| #include <linux/list.h> |
| #include <linux/mutex.h> |
| #include <linux/printk.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/string.h> |
| #include <linux/srcu.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/gpio/driver.h> |
| |
| #include <uapi/linux/gpio.h> |
| |
| #include "gpiolib.h" |
| #include "gpiolib-sysfs.h" |
| |
| struct kernfs_node; |
| |
| #define GPIO_IRQF_TRIGGER_NONE 0 |
| #define GPIO_IRQF_TRIGGER_FALLING BIT(0) |
| #define GPIO_IRQF_TRIGGER_RISING BIT(1) |
| #define GPIO_IRQF_TRIGGER_BOTH (GPIO_IRQF_TRIGGER_FALLING | \ |
| GPIO_IRQF_TRIGGER_RISING) |
| |
| struct gpiod_data { |
| struct gpio_desc *desc; |
| |
| struct mutex mutex; |
| struct kernfs_node *value_kn; |
| int irq; |
| unsigned char irq_flags; |
| |
| bool direction_can_change; |
| }; |
| |
| /* |
| * Lock to serialise gpiod export and unexport, and prevent re-export of |
| * gpiod whose chip is being unregistered. |
| */ |
| static DEFINE_MUTEX(sysfs_lock); |
| |
| /* |
| * /sys/class/gpio/gpioN... only for GPIOs that are exported |
| * /direction |
| * * MAY BE OMITTED if kernel won't allow direction changes |
| * * is read/write as "in" or "out" |
| * * may also be written as "high" or "low", initializing |
| * output value as specified ("out" implies "low") |
| * /value |
| * * always readable, subject to hardware behavior |
| * * may be writable, as zero/nonzero |
| * /edge |
| * * configures behavior of poll(2) on /value |
| * * available only if pin can generate IRQs on input |
| * * is read/write as "none", "falling", "rising", or "both" |
| * /active_low |
| * * configures polarity of /value |
| * * is read/write as zero/nonzero |
| * * also affects existing and subsequent "falling" and "rising" |
| * /edge configuration |
| */ |
| |
| static ssize_t direction_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| int value; |
| |
| scoped_guard(mutex, &data->mutex) { |
| gpiod_get_direction(desc); |
| value = !!test_bit(FLAG_IS_OUT, &desc->flags); |
| } |
| |
| return sysfs_emit(buf, "%s\n", value ? "out" : "in"); |
| } |
| |
| static ssize_t direction_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| ssize_t status; |
| |
| guard(mutex)(&data->mutex); |
| |
| if (sysfs_streq(buf, "high")) |
| status = gpiod_direction_output_raw(desc, 1); |
| else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low")) |
| status = gpiod_direction_output_raw(desc, 0); |
| else if (sysfs_streq(buf, "in")) |
| status = gpiod_direction_input(desc); |
| else |
| status = -EINVAL; |
| |
| return status ? : size; |
| } |
| static DEVICE_ATTR_RW(direction); |
| |
| static ssize_t value_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| ssize_t status; |
| |
| scoped_guard(mutex, &data->mutex) |
| status = gpiod_get_value_cansleep(desc); |
| |
| if (status < 0) |
| return status; |
| |
| return sysfs_emit(buf, "%zd\n", status); |
| } |
| |
| static ssize_t value_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| ssize_t status; |
| long value; |
| |
| status = kstrtol(buf, 0, &value); |
| |
| guard(mutex)(&data->mutex); |
| |
| if (!test_bit(FLAG_IS_OUT, &desc->flags)) |
| return -EPERM; |
| |
| if (status) |
| return status; |
| |
| gpiod_set_value_cansleep(desc, value); |
| |
| return size; |
| } |
| static DEVICE_ATTR_PREALLOC(value, S_IWUSR | S_IRUGO, value_show, value_store); |
| |
| static irqreturn_t gpio_sysfs_irq(int irq, void *priv) |
| { |
| struct gpiod_data *data = priv; |
| |
| sysfs_notify_dirent(data->value_kn); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Caller holds gpiod-data mutex. */ |
| static int gpio_sysfs_request_irq(struct device *dev, unsigned char flags) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| unsigned long irq_flags; |
| int ret; |
| |
| CLASS(gpio_chip_guard, guard)(desc); |
| if (!guard.gc) |
| return -ENODEV; |
| |
| data->irq = gpiod_to_irq(desc); |
| if (data->irq < 0) |
| return -EIO; |
| |
| data->value_kn = sysfs_get_dirent(dev->kobj.sd, "value"); |
| if (!data->value_kn) |
| return -ENODEV; |
| |
| irq_flags = IRQF_SHARED; |
| if (flags & GPIO_IRQF_TRIGGER_FALLING) { |
| irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? |
| IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING; |
| set_bit(FLAG_EDGE_FALLING, &desc->flags); |
| } |
| if (flags & GPIO_IRQF_TRIGGER_RISING) { |
| irq_flags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ? |
| IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING; |
| set_bit(FLAG_EDGE_RISING, &desc->flags); |
| } |
| |
| /* |
| * FIXME: This should be done in the irq_request_resources callback |
| * when the irq is requested, but a few drivers currently fail |
| * to do so. |
| * |
| * Remove this redundant call (along with the corresponding |
| * unlock) when those drivers have been fixed. |
| */ |
| ret = gpiochip_lock_as_irq(guard.gc, gpio_chip_hwgpio(desc)); |
| if (ret < 0) |
| goto err_put_kn; |
| |
| ret = request_any_context_irq(data->irq, gpio_sysfs_irq, irq_flags, |
| "gpiolib", data); |
| if (ret < 0) |
| goto err_unlock; |
| |
| data->irq_flags = flags; |
| |
| return 0; |
| |
| err_unlock: |
| gpiochip_unlock_as_irq(guard.gc, gpio_chip_hwgpio(desc)); |
| err_put_kn: |
| clear_bit(FLAG_EDGE_RISING, &desc->flags); |
| clear_bit(FLAG_EDGE_FALLING, &desc->flags); |
| sysfs_put(data->value_kn); |
| |
| return ret; |
| } |
| |
| /* |
| * Caller holds gpiod-data mutex (unless called after class-device |
| * deregistration). |
| */ |
| static void gpio_sysfs_free_irq(struct device *dev) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| |
| CLASS(gpio_chip_guard, guard)(desc); |
| if (!guard.gc) |
| return; |
| |
| data->irq_flags = 0; |
| free_irq(data->irq, data); |
| gpiochip_unlock_as_irq(guard.gc, gpio_chip_hwgpio(desc)); |
| clear_bit(FLAG_EDGE_RISING, &desc->flags); |
| clear_bit(FLAG_EDGE_FALLING, &desc->flags); |
| sysfs_put(data->value_kn); |
| } |
| |
| static const char * const trigger_names[] = { |
| [GPIO_IRQF_TRIGGER_NONE] = "none", |
| [GPIO_IRQF_TRIGGER_FALLING] = "falling", |
| [GPIO_IRQF_TRIGGER_RISING] = "rising", |
| [GPIO_IRQF_TRIGGER_BOTH] = "both", |
| }; |
| |
| static ssize_t edge_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| int flags; |
| |
| scoped_guard(mutex, &data->mutex) |
| flags = data->irq_flags; |
| |
| if (flags >= ARRAY_SIZE(trigger_names)) |
| return 0; |
| |
| return sysfs_emit(buf, "%s\n", trigger_names[flags]); |
| } |
| |
| static ssize_t edge_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| ssize_t status = size; |
| int flags; |
| |
| flags = sysfs_match_string(trigger_names, buf); |
| if (flags < 0) |
| return flags; |
| |
| guard(mutex)(&data->mutex); |
| |
| if (flags == data->irq_flags) |
| return size; |
| |
| if (data->irq_flags) |
| gpio_sysfs_free_irq(dev); |
| |
| if (!flags) |
| return size; |
| |
| status = gpio_sysfs_request_irq(dev, flags); |
| if (status) |
| return status; |
| |
| gpiod_line_state_notify(data->desc, GPIO_V2_LINE_CHANGED_CONFIG); |
| |
| return size; |
| } |
| static DEVICE_ATTR_RW(edge); |
| |
| /* Caller holds gpiod-data mutex. */ |
| static int gpio_sysfs_set_active_low(struct device *dev, int value) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| unsigned int flags = data->irq_flags; |
| struct gpio_desc *desc = data->desc; |
| int status = 0; |
| |
| |
| if (!!test_bit(FLAG_ACTIVE_LOW, &desc->flags) == !!value) |
| return 0; |
| |
| assign_bit(FLAG_ACTIVE_LOW, &desc->flags, value); |
| |
| /* reconfigure poll(2) support if enabled on one edge only */ |
| if (flags == GPIO_IRQF_TRIGGER_FALLING || |
| flags == GPIO_IRQF_TRIGGER_RISING) { |
| gpio_sysfs_free_irq(dev); |
| status = gpio_sysfs_request_irq(dev, flags); |
| } |
| |
| gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_CONFIG); |
| |
| return status; |
| } |
| |
| static ssize_t active_low_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| int value; |
| |
| scoped_guard(mutex, &data->mutex) |
| value = !!test_bit(FLAG_ACTIVE_LOW, &desc->flags); |
| |
| return sysfs_emit(buf, "%d\n", value); |
| } |
| |
| static ssize_t active_low_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t size) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| ssize_t status; |
| long value; |
| |
| status = kstrtol(buf, 0, &value); |
| if (status) |
| return status; |
| |
| guard(mutex)(&data->mutex); |
| |
| return gpio_sysfs_set_active_low(dev, value) ?: size; |
| } |
| static DEVICE_ATTR_RW(active_low); |
| |
| static umode_t gpio_is_visible(struct kobject *kobj, struct attribute *attr, |
| int n) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| struct gpio_desc *desc = data->desc; |
| umode_t mode = attr->mode; |
| bool show_direction = data->direction_can_change; |
| |
| if (attr == &dev_attr_direction.attr) { |
| if (!show_direction) |
| mode = 0; |
| } else if (attr == &dev_attr_edge.attr) { |
| if (gpiod_to_irq(desc) < 0) |
| mode = 0; |
| if (!show_direction && test_bit(FLAG_IS_OUT, &desc->flags)) |
| mode = 0; |
| } |
| |
| return mode; |
| } |
| |
| static struct attribute *gpio_attrs[] = { |
| &dev_attr_direction.attr, |
| &dev_attr_edge.attr, |
| &dev_attr_value.attr, |
| &dev_attr_active_low.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group gpio_group = { |
| .attrs = gpio_attrs, |
| .is_visible = gpio_is_visible, |
| }; |
| |
| static const struct attribute_group *gpio_groups[] = { |
| &gpio_group, |
| NULL |
| }; |
| |
| /* |
| * /sys/class/gpio/gpiochipN/ |
| * /base ... matching gpio_chip.base (N) |
| * /label ... matching gpio_chip.label |
| * /ngpio ... matching gpio_chip.ngpio |
| */ |
| |
| static ssize_t base_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_device *gdev = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", gdev->base); |
| } |
| static DEVICE_ATTR_RO(base); |
| |
| static ssize_t label_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_device *gdev = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%s\n", gdev->label); |
| } |
| static DEVICE_ATTR_RO(label); |
| |
| static ssize_t ngpio_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const struct gpio_device *gdev = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%u\n", gdev->ngpio); |
| } |
| static DEVICE_ATTR_RO(ngpio); |
| |
| static struct attribute *gpiochip_attrs[] = { |
| &dev_attr_base.attr, |
| &dev_attr_label.attr, |
| &dev_attr_ngpio.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(gpiochip); |
| |
| /* |
| * /sys/class/gpio/export ... write-only |
| * integer N ... number of GPIO to export (full access) |
| * /sys/class/gpio/unexport ... write-only |
| * integer N ... number of GPIO to unexport |
| */ |
| static ssize_t export_store(const struct class *class, |
| const struct class_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct gpio_desc *desc; |
| int status, offset; |
| long gpio; |
| |
| status = kstrtol(buf, 0, &gpio); |
| if (status) |
| return status; |
| |
| desc = gpio_to_desc(gpio); |
| /* reject invalid GPIOs */ |
| if (!desc) { |
| pr_debug_ratelimited("%s: invalid GPIO %ld\n", __func__, gpio); |
| return -EINVAL; |
| } |
| |
| CLASS(gpio_chip_guard, guard)(desc); |
| if (!guard.gc) |
| return -ENODEV; |
| |
| offset = gpio_chip_hwgpio(desc); |
| if (!gpiochip_line_is_valid(guard.gc, offset)) { |
| pr_debug_ratelimited("%s: GPIO %ld masked\n", __func__, gpio); |
| return -EINVAL; |
| } |
| |
| /* No extra locking here; FLAG_SYSFS just signifies that the |
| * request and export were done by on behalf of userspace, so |
| * they may be undone on its behalf too. |
| */ |
| |
| status = gpiod_request_user(desc, "sysfs"); |
| if (status) |
| goto done; |
| |
| status = gpiod_set_transitory(desc, false); |
| if (status) { |
| gpiod_free(desc); |
| goto done; |
| } |
| |
| status = gpiod_export(desc, true); |
| if (status < 0) { |
| gpiod_free(desc); |
| } else { |
| set_bit(FLAG_SYSFS, &desc->flags); |
| gpiod_line_state_notify(desc, GPIO_V2_LINE_CHANGED_REQUESTED); |
| } |
| |
| done: |
| if (status) |
| pr_debug("%s: status %d\n", __func__, status); |
| return status ? : len; |
| } |
| static CLASS_ATTR_WO(export); |
| |
| static ssize_t unexport_store(const struct class *class, |
| const struct class_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct gpio_desc *desc; |
| int status; |
| long gpio; |
| |
| status = kstrtol(buf, 0, &gpio); |
| if (status < 0) |
| goto done; |
| |
| desc = gpio_to_desc(gpio); |
| /* reject bogus commands (gpiod_unexport() ignores them) */ |
| if (!desc) { |
| pr_debug_ratelimited("%s: invalid GPIO %ld\n", __func__, gpio); |
| return -EINVAL; |
| } |
| |
| status = -EINVAL; |
| |
| /* No extra locking here; FLAG_SYSFS just signifies that the |
| * request and export were done by on behalf of userspace, so |
| * they may be undone on its behalf too. |
| */ |
| if (test_and_clear_bit(FLAG_SYSFS, &desc->flags)) { |
| gpiod_unexport(desc); |
| gpiod_free(desc); |
| status = 0; |
| } |
| done: |
| if (status) |
| pr_debug("%s: status %d\n", __func__, status); |
| return status ? : len; |
| } |
| static CLASS_ATTR_WO(unexport); |
| |
| static struct attribute *gpio_class_attrs[] = { |
| &class_attr_export.attr, |
| &class_attr_unexport.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(gpio_class); |
| |
| static const struct class gpio_class = { |
| .name = "gpio", |
| .class_groups = gpio_class_groups, |
| }; |
| |
| /** |
| * gpiod_export - export a GPIO through sysfs |
| * @desc: GPIO to make available, already requested |
| * @direction_may_change: true if userspace may change GPIO direction |
| * Context: arch_initcall or later |
| * |
| * When drivers want to make a GPIO accessible to userspace after they |
| * have requested it -- perhaps while debugging, or as part of their |
| * public interface -- they may use this routine. If the GPIO can |
| * change direction (some can't) and the caller allows it, userspace |
| * will see "direction" sysfs attribute which may be used to change |
| * the gpio's direction. A "value" attribute will always be provided. |
| * |
| * Returns: |
| * 0 on success, or negative errno on failure. |
| */ |
| int gpiod_export(struct gpio_desc *desc, bool direction_may_change) |
| { |
| struct gpio_device *gdev; |
| struct gpiod_data *data; |
| struct device *dev; |
| int status; |
| |
| /* can't export until sysfs is available ... */ |
| if (!class_is_registered(&gpio_class)) { |
| pr_debug("%s: called too early!\n", __func__); |
| return -ENOENT; |
| } |
| |
| if (!desc) { |
| pr_debug("%s: invalid gpio descriptor\n", __func__); |
| return -EINVAL; |
| } |
| |
| CLASS(gpio_chip_guard, guard)(desc); |
| if (!guard.gc) |
| return -ENODEV; |
| |
| if (test_and_set_bit(FLAG_EXPORT, &desc->flags)) |
| return -EPERM; |
| |
| gdev = desc->gdev; |
| |
| guard(mutex)(&sysfs_lock); |
| |
| /* check if chip is being removed */ |
| if (!gdev->mockdev) { |
| status = -ENODEV; |
| goto err_clear_bit; |
| } |
| |
| if (!test_bit(FLAG_REQUESTED, &desc->flags)) { |
| gpiod_dbg(desc, "%s: unavailable (not requested)\n", __func__); |
| status = -EPERM; |
| goto err_clear_bit; |
| } |
| |
| data = kzalloc(sizeof(*data), GFP_KERNEL); |
| if (!data) { |
| status = -ENOMEM; |
| goto err_clear_bit; |
| } |
| |
| data->desc = desc; |
| mutex_init(&data->mutex); |
| if (guard.gc->direction_input && guard.gc->direction_output) |
| data->direction_can_change = direction_may_change; |
| else |
| data->direction_can_change = false; |
| |
| dev = device_create_with_groups(&gpio_class, &gdev->dev, |
| MKDEV(0, 0), data, gpio_groups, |
| "gpio%u", desc_to_gpio(desc)); |
| if (IS_ERR(dev)) { |
| status = PTR_ERR(dev); |
| goto err_free_data; |
| } |
| |
| return 0; |
| |
| err_free_data: |
| kfree(data); |
| err_clear_bit: |
| clear_bit(FLAG_EXPORT, &desc->flags); |
| gpiod_dbg(desc, "%s: status %d\n", __func__, status); |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(gpiod_export); |
| |
| static int match_export(struct device *dev, const void *desc) |
| { |
| struct gpiod_data *data = dev_get_drvdata(dev); |
| |
| return data->desc == desc; |
| } |
| |
| /** |
| * gpiod_export_link - create a sysfs link to an exported GPIO node |
| * @dev: device under which to create symlink |
| * @name: name of the symlink |
| * @desc: GPIO to create symlink to, already exported |
| * |
| * Set up a symlink from /sys/.../dev/name to /sys/class/gpio/gpioN |
| * node. Caller is responsible for unlinking. |
| * |
| * Returns: |
| * 0 on success, or negative errno on failure. |
| */ |
| int gpiod_export_link(struct device *dev, const char *name, |
| struct gpio_desc *desc) |
| { |
| struct device *cdev; |
| int ret; |
| |
| if (!desc) { |
| pr_warn("%s: invalid GPIO\n", __func__); |
| return -EINVAL; |
| } |
| |
| cdev = class_find_device(&gpio_class, NULL, desc, match_export); |
| if (!cdev) |
| return -ENODEV; |
| |
| ret = sysfs_create_link(&dev->kobj, &cdev->kobj, name); |
| put_device(cdev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(gpiod_export_link); |
| |
| /** |
| * gpiod_unexport - reverse effect of gpiod_export() |
| * @desc: GPIO to make unavailable |
| * |
| * This is implicit on gpiod_free(). |
| */ |
| void gpiod_unexport(struct gpio_desc *desc) |
| { |
| struct gpiod_data *data; |
| struct device *dev; |
| |
| if (!desc) { |
| pr_warn("%s: invalid GPIO\n", __func__); |
| return; |
| } |
| |
| scoped_guard(mutex, &sysfs_lock) { |
| if (!test_bit(FLAG_EXPORT, &desc->flags)) |
| return; |
| |
| dev = class_find_device(&gpio_class, NULL, desc, match_export); |
| if (!dev) |
| return; |
| |
| data = dev_get_drvdata(dev); |
| clear_bit(FLAG_EXPORT, &desc->flags); |
| device_unregister(dev); |
| |
| /* |
| * Release irq after deregistration to prevent race with |
| * edge_store. |
| */ |
| if (data->irq_flags) |
| gpio_sysfs_free_irq(dev); |
| } |
| |
| put_device(dev); |
| kfree(data); |
| } |
| EXPORT_SYMBOL_GPL(gpiod_unexport); |
| |
| int gpiochip_sysfs_register(struct gpio_device *gdev) |
| { |
| struct gpio_chip *chip; |
| struct device *parent; |
| struct device *dev; |
| |
| /* |
| * Many systems add gpio chips for SOC support very early, |
| * before driver model support is available. In those cases we |
| * register later, in gpiolib_sysfs_init() ... here we just |
| * verify that _some_ field of gpio_class got initialized. |
| */ |
| if (!class_is_registered(&gpio_class)) |
| return 0; |
| |
| guard(srcu)(&gdev->srcu); |
| |
| chip = srcu_dereference(gdev->chip, &gdev->srcu); |
| if (!chip) |
| return -ENODEV; |
| |
| /* |
| * For sysfs backward compatibility we need to preserve this |
| * preferred parenting to the gpio_chip parent field, if set. |
| */ |
| if (chip->parent) |
| parent = chip->parent; |
| else |
| parent = &gdev->dev; |
| |
| /* use chip->base for the ID; it's already known to be unique */ |
| dev = device_create_with_groups(&gpio_class, parent, MKDEV(0, 0), gdev, |
| gpiochip_groups, GPIOCHIP_NAME "%d", |
| chip->base); |
| if (IS_ERR(dev)) |
| return PTR_ERR(dev); |
| |
| guard(mutex)(&sysfs_lock); |
| gdev->mockdev = dev; |
| |
| return 0; |
| } |
| |
| void gpiochip_sysfs_unregister(struct gpio_device *gdev) |
| { |
| struct gpio_desc *desc; |
| struct gpio_chip *chip; |
| |
| scoped_guard(mutex, &sysfs_lock) { |
| if (!gdev->mockdev) |
| return; |
| |
| device_unregister(gdev->mockdev); |
| |
| /* prevent further gpiod exports */ |
| gdev->mockdev = NULL; |
| } |
| |
| guard(srcu)(&gdev->srcu); |
| |
| chip = srcu_dereference(gdev->chip, &gdev->srcu); |
| if (!chip) |
| return; |
| |
| /* unregister gpiod class devices owned by sysfs */ |
| for_each_gpio_desc_with_flag(chip, desc, FLAG_SYSFS) { |
| gpiod_unexport(desc); |
| gpiod_free(desc); |
| } |
| } |
| |
| /* |
| * We're not really looking for a device - we just want to iterate over the |
| * list and call this callback for each GPIO device. This is why this function |
| * always returns 0. |
| */ |
| static int gpiofind_sysfs_register(struct gpio_chip *gc, const void *data) |
| { |
| struct gpio_device *gdev = gc->gpiodev; |
| int ret; |
| |
| if (gdev->mockdev) |
| return 0; |
| |
| ret = gpiochip_sysfs_register(gdev); |
| if (ret) |
| chip_err(gc, "failed to register the sysfs entry: %d\n", ret); |
| |
| return 0; |
| } |
| |
| static int __init gpiolib_sysfs_init(void) |
| { |
| int status; |
| |
| status = class_register(&gpio_class); |
| if (status < 0) |
| return status; |
| |
| /* Scan and register the gpio_chips which registered very |
| * early (e.g. before the class_register above was called). |
| * |
| * We run before arch_initcall() so chip->dev nodes can have |
| * registered, and so arch_initcall() can always gpiod_export(). |
| */ |
| (void)gpio_device_find(NULL, gpiofind_sysfs_register); |
| |
| return 0; |
| } |
| postcore_initcall(gpiolib_sysfs_init); |