| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| #include <linux/regmap.h> |
| #include <linux/of.h> |
| #include <linux/input/matrix_keypad.h> |
| |
| #define PM8XXX_MAX_ROWS 18 |
| #define PM8XXX_MAX_COLS 8 |
| #define PM8XXX_ROW_SHIFT 3 |
| #define PM8XXX_MATRIX_MAX_SIZE (PM8XXX_MAX_ROWS * PM8XXX_MAX_COLS) |
| |
| #define PM8XXX_MIN_ROWS 5 |
| #define PM8XXX_MIN_COLS 5 |
| |
| #define MAX_SCAN_DELAY 128 |
| #define MIN_SCAN_DELAY 1 |
| |
| /* in nanoseconds */ |
| #define MAX_ROW_HOLD_DELAY 122000 |
| #define MIN_ROW_HOLD_DELAY 30500 |
| |
| #define MAX_DEBOUNCE_TIME 20 |
| #define MIN_DEBOUNCE_TIME 5 |
| |
| #define KEYP_CTRL 0x148 |
| |
| #define KEYP_CTRL_EVNTS BIT(0) |
| #define KEYP_CTRL_EVNTS_MASK 0x3 |
| |
| #define KEYP_CTRL_SCAN_COLS_SHIFT 5 |
| #define KEYP_CTRL_SCAN_COLS_MIN 5 |
| #define KEYP_CTRL_SCAN_COLS_BITS 0x3 |
| |
| #define KEYP_CTRL_SCAN_ROWS_SHIFT 2 |
| #define KEYP_CTRL_SCAN_ROWS_MIN 5 |
| #define KEYP_CTRL_SCAN_ROWS_BITS 0x7 |
| |
| #define KEYP_CTRL_KEYP_EN BIT(7) |
| |
| #define KEYP_SCAN 0x149 |
| |
| #define KEYP_SCAN_READ_STATE BIT(0) |
| #define KEYP_SCAN_DBOUNCE_SHIFT 1 |
| #define KEYP_SCAN_PAUSE_SHIFT 3 |
| #define KEYP_SCAN_ROW_HOLD_SHIFT 6 |
| |
| #define KEYP_TEST 0x14A |
| |
| #define KEYP_TEST_CLEAR_RECENT_SCAN BIT(6) |
| #define KEYP_TEST_CLEAR_OLD_SCAN BIT(5) |
| #define KEYP_TEST_READ_RESET BIT(4) |
| #define KEYP_TEST_DTEST_EN BIT(3) |
| #define KEYP_TEST_ABORT_READ BIT(0) |
| |
| #define KEYP_TEST_DBG_SELECT_SHIFT 1 |
| |
| /* bits of these registers represent |
| * '0' for key press |
| * '1' for key release |
| */ |
| #define KEYP_RECENT_DATA 0x14B |
| #define KEYP_OLD_DATA 0x14C |
| |
| #define KEYP_CLOCK_FREQ 32768 |
| |
| /** |
| * struct pmic8xxx_kp - internal keypad data structure |
| * @num_cols: number of columns of keypad |
| * @num_rows: number of row of keypad |
| * @input: input device pointer for keypad |
| * @regmap: regmap handle |
| * @key_sense_irq: key press/release irq number |
| * @key_stuck_irq: key stuck notification irq number |
| * @keycodes: array to hold the key codes |
| * @dev: parent device pointer |
| * @keystate: present key press/release state |
| * @stuckstate: present state when key stuck irq |
| * @ctrl_reg: control register value |
| */ |
| struct pmic8xxx_kp { |
| unsigned int num_rows; |
| unsigned int num_cols; |
| struct input_dev *input; |
| struct regmap *regmap; |
| int key_sense_irq; |
| int key_stuck_irq; |
| |
| unsigned short keycodes[PM8XXX_MATRIX_MAX_SIZE]; |
| |
| struct device *dev; |
| u16 keystate[PM8XXX_MAX_ROWS]; |
| u16 stuckstate[PM8XXX_MAX_ROWS]; |
| |
| u8 ctrl_reg; |
| }; |
| |
| static u8 pmic8xxx_col_state(struct pmic8xxx_kp *kp, u8 col) |
| { |
| /* all keys pressed on that particular row? */ |
| if (col == 0x00) |
| return 1 << kp->num_cols; |
| else |
| return col & ((1 << kp->num_cols) - 1); |
| } |
| |
| /* |
| * Synchronous read protocol for RevB0 onwards: |
| * |
| * 1. Write '1' to ReadState bit in KEYP_SCAN register |
| * 2. Wait 2*32KHz clocks, so that HW can successfully enter read mode |
| * synchronously |
| * 3. Read rows in old array first if events are more than one |
| * 4. Read rows in recent array |
| * 5. Wait 4*32KHz clocks |
| * 6. Write '0' to ReadState bit of KEYP_SCAN register so that hw can |
| * synchronously exit read mode. |
| */ |
| static int pmic8xxx_chk_sync_read(struct pmic8xxx_kp *kp) |
| { |
| int rc; |
| unsigned int scan_val; |
| |
| rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| scan_val |= 0x1; |
| |
| rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* 2 * 32KHz clocks */ |
| udelay((2 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_read_data(struct pmic8xxx_kp *kp, u16 *state, |
| u16 data_reg, int read_rows) |
| { |
| int rc, row; |
| unsigned int val; |
| |
| for (row = 0; row < read_rows; row++) { |
| rc = regmap_read(kp->regmap, data_reg, &val); |
| if (rc) |
| return rc; |
| dev_dbg(kp->dev, "%d = %d\n", row, val); |
| state[row] = pmic8xxx_col_state(kp, val); |
| } |
| |
| return 0; |
| } |
| |
| static int pmic8xxx_kp_read_matrix(struct pmic8xxx_kp *kp, u16 *new_state, |
| u16 *old_state) |
| { |
| int rc, read_rows; |
| unsigned int scan_val; |
| |
| if (kp->num_rows < PM8XXX_MIN_ROWS) |
| read_rows = PM8XXX_MIN_ROWS; |
| else |
| read_rows = kp->num_rows; |
| |
| pmic8xxx_chk_sync_read(kp); |
| |
| if (old_state) { |
| rc = pmic8xxx_kp_read_data(kp, old_state, KEYP_OLD_DATA, |
| read_rows); |
| if (rc < 0) { |
| dev_err(kp->dev, |
| "Error reading KEYP_OLD_DATA, rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| rc = pmic8xxx_kp_read_data(kp, new_state, KEYP_RECENT_DATA, |
| read_rows); |
| if (rc < 0) { |
| dev_err(kp->dev, |
| "Error reading KEYP_RECENT_DATA, rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* 4 * 32KHz clocks */ |
| udelay((4 * DIV_ROUND_UP(USEC_PER_SEC, KEYP_CLOCK_FREQ)) + 1); |
| |
| rc = regmap_read(kp->regmap, KEYP_SCAN, &scan_val); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error reading KEYP_SCAN reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| scan_val &= 0xFE; |
| rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); |
| if (rc < 0) |
| dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); |
| |
| return rc; |
| } |
| |
| static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state, |
| u16 *old_state) |
| { |
| int row, col, code; |
| |
| for (row = 0; row < kp->num_rows; row++) { |
| int bits_changed = new_state[row] ^ old_state[row]; |
| |
| if (!bits_changed) |
| continue; |
| |
| for (col = 0; col < kp->num_cols; col++) { |
| if (!(bits_changed & (1 << col))) |
| continue; |
| |
| dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col, |
| !(new_state[row] & (1 << col)) ? |
| "pressed" : "released"); |
| |
| code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT); |
| |
| input_event(kp->input, EV_MSC, MSC_SCAN, code); |
| input_report_key(kp->input, |
| kp->keycodes[code], |
| !(new_state[row] & (1 << col))); |
| |
| input_sync(kp->input); |
| } |
| } |
| } |
| |
| static bool pmic8xxx_detect_ghost_keys(struct pmic8xxx_kp *kp, u16 *new_state) |
| { |
| int row, found_first = -1; |
| u16 check, row_state; |
| |
| check = 0; |
| for (row = 0; row < kp->num_rows; row++) { |
| row_state = (~new_state[row]) & |
| ((1 << kp->num_cols) - 1); |
| |
| if (hweight16(row_state) > 1) { |
| if (found_first == -1) |
| found_first = row; |
| if (check & row_state) { |
| dev_dbg(kp->dev, "detected ghost key on row[%d]" |
| " and row[%d]\n", found_first, row); |
| return true; |
| } |
| } |
| check |= row_state; |
| } |
| return false; |
| } |
| |
| static int pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, unsigned int events) |
| { |
| u16 new_state[PM8XXX_MAX_ROWS]; |
| u16 old_state[PM8XXX_MAX_ROWS]; |
| int rc; |
| |
| switch (events) { |
| case 0x1: |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, NULL); |
| if (rc < 0) |
| return rc; |
| |
| /* detecting ghost key is not an error */ |
| if (pmic8xxx_detect_ghost_keys(kp, new_state)) |
| return 0; |
| __pmic8xxx_kp_scan_matrix(kp, new_state, kp->keystate); |
| memcpy(kp->keystate, new_state, sizeof(new_state)); |
| break; |
| case 0x3: /* two events - eventcounter is gray-coded */ |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); |
| if (rc < 0) |
| return rc; |
| |
| __pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate); |
| __pmic8xxx_kp_scan_matrix(kp, new_state, old_state); |
| memcpy(kp->keystate, new_state, sizeof(new_state)); |
| break; |
| case 0x2: |
| dev_dbg(kp->dev, "Some key events were lost\n"); |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); |
| if (rc < 0) |
| return rc; |
| __pmic8xxx_kp_scan_matrix(kp, old_state, kp->keystate); |
| __pmic8xxx_kp_scan_matrix(kp, new_state, old_state); |
| memcpy(kp->keystate, new_state, sizeof(new_state)); |
| break; |
| default: |
| rc = -EINVAL; |
| } |
| return rc; |
| } |
| |
| /* |
| * NOTE: We are reading recent and old data registers blindly |
| * whenever key-stuck interrupt happens, because events counter doesn't |
| * get updated when this interrupt happens due to key stuck doesn't get |
| * considered as key state change. |
| * |
| * We are not using old data register contents after they are being read |
| * because it might report the key which was pressed before the key being stuck |
| * as stuck key because it's pressed status is stored in the old data |
| * register. |
| */ |
| static irqreturn_t pmic8xxx_kp_stuck_irq(int irq, void *data) |
| { |
| u16 new_state[PM8XXX_MAX_ROWS]; |
| u16 old_state[PM8XXX_MAX_ROWS]; |
| int rc; |
| struct pmic8xxx_kp *kp = data; |
| |
| rc = pmic8xxx_kp_read_matrix(kp, new_state, old_state); |
| if (rc < 0) { |
| dev_err(kp->dev, "failed to read keypad matrix\n"); |
| return IRQ_HANDLED; |
| } |
| |
| __pmic8xxx_kp_scan_matrix(kp, new_state, kp->stuckstate); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t pmic8xxx_kp_irq(int irq, void *data) |
| { |
| struct pmic8xxx_kp *kp = data; |
| unsigned int ctrl_val, events; |
| int rc; |
| |
| rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val); |
| if (rc < 0) { |
| dev_err(kp->dev, "failed to read keyp_ctrl register\n"); |
| return IRQ_HANDLED; |
| } |
| |
| events = ctrl_val & KEYP_CTRL_EVNTS_MASK; |
| |
| rc = pmic8xxx_kp_scan_matrix(kp, events); |
| if (rc < 0) |
| dev_err(kp->dev, "failed to scan matrix\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int pmic8xxx_kpd_init(struct pmic8xxx_kp *kp, |
| struct platform_device *pdev) |
| { |
| const struct device_node *of_node = pdev->dev.of_node; |
| unsigned int scan_delay_ms; |
| unsigned int row_hold_ns; |
| unsigned int debounce_ms; |
| int bits, rc, cycles; |
| u8 scan_val = 0, ctrl_val = 0; |
| static const u8 row_bits[] = { |
| 0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 7, 7, 7, |
| }; |
| |
| /* Find column bits */ |
| if (kp->num_cols < KEYP_CTRL_SCAN_COLS_MIN) |
| bits = 0; |
| else |
| bits = kp->num_cols - KEYP_CTRL_SCAN_COLS_MIN; |
| ctrl_val = (bits & KEYP_CTRL_SCAN_COLS_BITS) << |
| KEYP_CTRL_SCAN_COLS_SHIFT; |
| |
| /* Find row bits */ |
| if (kp->num_rows < KEYP_CTRL_SCAN_ROWS_MIN) |
| bits = 0; |
| else |
| bits = row_bits[kp->num_rows - KEYP_CTRL_SCAN_ROWS_MIN]; |
| |
| ctrl_val |= (bits << KEYP_CTRL_SCAN_ROWS_SHIFT); |
| |
| rc = regmap_write(kp->regmap, KEYP_CTRL, ctrl_val); |
| if (rc < 0) { |
| dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (of_property_read_u32(of_node, "scan-delay", &scan_delay_ms)) |
| scan_delay_ms = MIN_SCAN_DELAY; |
| |
| if (scan_delay_ms > MAX_SCAN_DELAY || scan_delay_ms < MIN_SCAN_DELAY || |
| !is_power_of_2(scan_delay_ms)) { |
| dev_err(&pdev->dev, "invalid keypad scan time supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_u32(of_node, "row-hold", &row_hold_ns)) |
| row_hold_ns = MIN_ROW_HOLD_DELAY; |
| |
| if (row_hold_ns > MAX_ROW_HOLD_DELAY || |
| row_hold_ns < MIN_ROW_HOLD_DELAY || |
| ((row_hold_ns % MIN_ROW_HOLD_DELAY) != 0)) { |
| dev_err(&pdev->dev, "invalid keypad row hold time supplied\n"); |
| return -EINVAL; |
| } |
| |
| if (of_property_read_u32(of_node, "debounce", &debounce_ms)) |
| debounce_ms = MIN_DEBOUNCE_TIME; |
| |
| if (((debounce_ms % 5) != 0) || |
| debounce_ms > MAX_DEBOUNCE_TIME || |
| debounce_ms < MIN_DEBOUNCE_TIME) { |
| dev_err(&pdev->dev, "invalid debounce time supplied\n"); |
| return -EINVAL; |
| } |
| |
| bits = (debounce_ms / 5) - 1; |
| |
| scan_val |= (bits << KEYP_SCAN_DBOUNCE_SHIFT); |
| |
| bits = fls(scan_delay_ms) - 1; |
| scan_val |= (bits << KEYP_SCAN_PAUSE_SHIFT); |
| |
| /* Row hold time is a multiple of 32KHz cycles. */ |
| cycles = (row_hold_ns * KEYP_CLOCK_FREQ) / NSEC_PER_SEC; |
| |
| scan_val |= (cycles << KEYP_SCAN_ROW_HOLD_SHIFT); |
| |
| rc = regmap_write(kp->regmap, KEYP_SCAN, scan_val); |
| if (rc) |
| dev_err(kp->dev, "Error writing KEYP_SCAN reg, rc=%d\n", rc); |
| |
| return rc; |
| |
| } |
| |
| static int pmic8xxx_kp_enable(struct pmic8xxx_kp *kp) |
| { |
| int rc; |
| |
| kp->ctrl_reg |= KEYP_CTRL_KEYP_EN; |
| |
| rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg); |
| if (rc < 0) |
| dev_err(kp->dev, "Error writing KEYP_CTRL reg, rc=%d\n", rc); |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_disable(struct pmic8xxx_kp *kp) |
| { |
| int rc; |
| |
| kp->ctrl_reg &= ~KEYP_CTRL_KEYP_EN; |
| |
| rc = regmap_write(kp->regmap, KEYP_CTRL, kp->ctrl_reg); |
| if (rc < 0) |
| return rc; |
| |
| return rc; |
| } |
| |
| static int pmic8xxx_kp_open(struct input_dev *dev) |
| { |
| struct pmic8xxx_kp *kp = input_get_drvdata(dev); |
| |
| return pmic8xxx_kp_enable(kp); |
| } |
| |
| static void pmic8xxx_kp_close(struct input_dev *dev) |
| { |
| struct pmic8xxx_kp *kp = input_get_drvdata(dev); |
| |
| pmic8xxx_kp_disable(kp); |
| } |
| |
| /* |
| * keypad controller should be initialized in the following sequence |
| * only, otherwise it might get into FSM stuck state. |
| * |
| * - Initialize keypad control parameters, like no. of rows, columns, |
| * timing values etc., |
| * - configure rows and column gpios pull up/down. |
| * - set irq edge type. |
| * - enable the keypad controller. |
| */ |
| static int pmic8xxx_kp_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| unsigned int rows, cols; |
| bool repeat; |
| bool wakeup; |
| struct pmic8xxx_kp *kp; |
| int rc; |
| unsigned int ctrl_val; |
| |
| rc = matrix_keypad_parse_properties(&pdev->dev, &rows, &cols); |
| if (rc) |
| return rc; |
| |
| if (cols > PM8XXX_MAX_COLS || rows > PM8XXX_MAX_ROWS || |
| cols < PM8XXX_MIN_COLS) { |
| dev_err(&pdev->dev, "invalid platform data\n"); |
| return -EINVAL; |
| } |
| |
| repeat = !of_property_read_bool(np, "linux,input-no-autorepeat"); |
| |
| wakeup = of_property_read_bool(np, "wakeup-source") || |
| /* legacy name */ |
| of_property_read_bool(np, "linux,keypad-wakeup"); |
| |
| kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); |
| if (!kp) |
| return -ENOMEM; |
| |
| kp->regmap = dev_get_regmap(pdev->dev.parent, NULL); |
| if (!kp->regmap) |
| return -ENODEV; |
| |
| platform_set_drvdata(pdev, kp); |
| |
| kp->num_rows = rows; |
| kp->num_cols = cols; |
| kp->dev = &pdev->dev; |
| |
| kp->input = devm_input_allocate_device(&pdev->dev); |
| if (!kp->input) { |
| dev_err(&pdev->dev, "unable to allocate input device\n"); |
| return -ENOMEM; |
| } |
| |
| kp->key_sense_irq = platform_get_irq(pdev, 0); |
| if (kp->key_sense_irq < 0) |
| return kp->key_sense_irq; |
| |
| kp->key_stuck_irq = platform_get_irq(pdev, 1); |
| if (kp->key_stuck_irq < 0) |
| return kp->key_stuck_irq; |
| |
| kp->input->name = "PMIC8XXX keypad"; |
| kp->input->phys = "pmic8xxx_keypad/input0"; |
| |
| kp->input->id.bustype = BUS_I2C; |
| kp->input->id.version = 0x0001; |
| kp->input->id.product = 0x0001; |
| kp->input->id.vendor = 0x0001; |
| |
| kp->input->open = pmic8xxx_kp_open; |
| kp->input->close = pmic8xxx_kp_close; |
| |
| rc = matrix_keypad_build_keymap(NULL, NULL, |
| PM8XXX_MAX_ROWS, PM8XXX_MAX_COLS, |
| kp->keycodes, kp->input); |
| if (rc) { |
| dev_err(&pdev->dev, "failed to build keymap\n"); |
| return rc; |
| } |
| |
| if (repeat) |
| __set_bit(EV_REP, kp->input->evbit); |
| input_set_capability(kp->input, EV_MSC, MSC_SCAN); |
| |
| input_set_drvdata(kp->input, kp); |
| |
| /* initialize keypad state */ |
| memset(kp->keystate, 0xff, sizeof(kp->keystate)); |
| memset(kp->stuckstate, 0xff, sizeof(kp->stuckstate)); |
| |
| rc = pmic8xxx_kpd_init(kp, pdev); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "unable to initialize keypad controller\n"); |
| return rc; |
| } |
| |
| rc = devm_request_any_context_irq(&pdev->dev, kp->key_sense_irq, |
| pmic8xxx_kp_irq, IRQF_TRIGGER_RISING, "pmic-keypad", |
| kp); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to request keypad sense irq\n"); |
| return rc; |
| } |
| |
| rc = devm_request_any_context_irq(&pdev->dev, kp->key_stuck_irq, |
| pmic8xxx_kp_stuck_irq, IRQF_TRIGGER_RISING, |
| "pmic-keypad-stuck", kp); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to request keypad stuck irq\n"); |
| return rc; |
| } |
| |
| rc = regmap_read(kp->regmap, KEYP_CTRL, &ctrl_val); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "failed to read KEYP_CTRL register\n"); |
| return rc; |
| } |
| |
| kp->ctrl_reg = ctrl_val; |
| |
| rc = input_register_device(kp->input); |
| if (rc < 0) { |
| dev_err(&pdev->dev, "unable to register keypad input device\n"); |
| return rc; |
| } |
| |
| device_init_wakeup(&pdev->dev, wakeup); |
| |
| return 0; |
| } |
| |
| static int pmic8xxx_kp_suspend(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = kp->input; |
| |
| if (device_may_wakeup(dev)) { |
| enable_irq_wake(kp->key_sense_irq); |
| } else { |
| guard(mutex)(&input_dev->mutex); |
| |
| if (input_device_enabled(input_dev)) |
| pmic8xxx_kp_disable(kp); |
| } |
| |
| return 0; |
| } |
| |
| static int pmic8xxx_kp_resume(struct device *dev) |
| { |
| struct platform_device *pdev = to_platform_device(dev); |
| struct pmic8xxx_kp *kp = platform_get_drvdata(pdev); |
| struct input_dev *input_dev = kp->input; |
| |
| if (device_may_wakeup(dev)) { |
| disable_irq_wake(kp->key_sense_irq); |
| } else { |
| guard(mutex)(&input_dev->mutex); |
| |
| if (input_device_enabled(input_dev)) |
| pmic8xxx_kp_enable(kp); |
| } |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(pm8xxx_kp_pm_ops, |
| pmic8xxx_kp_suspend, pmic8xxx_kp_resume); |
| |
| static const struct of_device_id pm8xxx_match_table[] = { |
| { .compatible = "qcom,pm8058-keypad" }, |
| { .compatible = "qcom,pm8921-keypad" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, pm8xxx_match_table); |
| |
| static struct platform_driver pmic8xxx_kp_driver = { |
| .probe = pmic8xxx_kp_probe, |
| .driver = { |
| .name = "pm8xxx-keypad", |
| .pm = pm_sleep_ptr(&pm8xxx_kp_pm_ops), |
| .of_match_table = pm8xxx_match_table, |
| }, |
| }; |
| module_platform_driver(pmic8xxx_kp_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("PMIC8XXX keypad driver"); |
| MODULE_ALIAS("platform:pmic8xxx_keypad"); |
| MODULE_AUTHOR("Trilok Soni <tsoni@codeaurora.org>"); |