| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LED driver for Marvell 88PM860x |
| * |
| * Copyright (C) 2009 Marvell International Ltd. |
| * Haojian Zhuang <haojian.zhuang@marvell.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| #include <linux/slab.h> |
| #include <linux/mfd/88pm860x.h> |
| #include <linux/module.h> |
| |
| #define LED_PWM_MASK (0x1F) |
| #define LED_CURRENT_MASK (0x07 << 5) |
| |
| #define LED_BLINK_MASK (0x7F) |
| |
| #define LED_ON_CONTINUOUS (0x0F << 3) |
| |
| #define LED1_BLINK_EN (1 << 1) |
| #define LED2_BLINK_EN (1 << 2) |
| |
| struct pm860x_led { |
| struct led_classdev cdev; |
| struct i2c_client *i2c; |
| struct pm860x_chip *chip; |
| struct mutex lock; |
| char name[MFD_NAME_SIZE]; |
| |
| int port; |
| int iset; |
| unsigned char brightness; |
| unsigned char current_brightness; |
| |
| int reg_control; |
| int reg_blink; |
| int blink_mask; |
| }; |
| |
| static int led_power_set(struct pm860x_chip *chip, int port, int on) |
| { |
| int ret = -EINVAL; |
| |
| switch (port) { |
| case 0: |
| case 1: |
| case 2: |
| ret = on ? pm8606_osc_enable(chip, RGB1_ENABLE) : |
| pm8606_osc_disable(chip, RGB1_ENABLE); |
| break; |
| case 3: |
| case 4: |
| case 5: |
| ret = on ? pm8606_osc_enable(chip, RGB2_ENABLE) : |
| pm8606_osc_disable(chip, RGB2_ENABLE); |
| break; |
| } |
| return ret; |
| } |
| |
| static int pm860x_led_set(struct led_classdev *cdev, |
| enum led_brightness value) |
| { |
| struct pm860x_led *led = container_of(cdev, struct pm860x_led, cdev); |
| struct pm860x_chip *chip; |
| unsigned char buf[3]; |
| int ret; |
| |
| chip = led->chip; |
| mutex_lock(&led->lock); |
| led->brightness = value >> 3; |
| |
| if ((led->current_brightness == 0) && led->brightness) { |
| led_power_set(chip, led->port, 1); |
| if (led->iset) { |
| pm860x_set_bits(led->i2c, led->reg_control, |
| LED_CURRENT_MASK, led->iset); |
| } |
| pm860x_set_bits(led->i2c, led->reg_blink, |
| LED_BLINK_MASK, LED_ON_CONTINUOUS); |
| pm860x_set_bits(led->i2c, PM8606_WLED3B, led->blink_mask, |
| led->blink_mask); |
| } |
| pm860x_set_bits(led->i2c, led->reg_control, LED_PWM_MASK, |
| led->brightness); |
| |
| if (led->brightness == 0) { |
| pm860x_bulk_read(led->i2c, led->reg_control, 3, buf); |
| ret = buf[0] & LED_PWM_MASK; |
| ret |= buf[1] & LED_PWM_MASK; |
| ret |= buf[2] & LED_PWM_MASK; |
| if (ret == 0) { |
| /* unset current since no led is lighting */ |
| pm860x_set_bits(led->i2c, led->reg_control, |
| LED_CURRENT_MASK, 0); |
| pm860x_set_bits(led->i2c, PM8606_WLED3B, |
| led->blink_mask, 0); |
| led_power_set(chip, led->port, 0); |
| } |
| } |
| led->current_brightness = led->brightness; |
| dev_dbg(chip->dev, "Update LED. (reg:%d, brightness:%d)\n", |
| led->reg_control, led->brightness); |
| mutex_unlock(&led->lock); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static int pm860x_led_dt_init(struct platform_device *pdev, |
| struct pm860x_led *data) |
| { |
| struct device_node *nproot; |
| int iset = 0; |
| |
| if (!dev_of_node(pdev->dev.parent)) |
| return -ENODEV; |
| nproot = of_get_child_by_name(dev_of_node(pdev->dev.parent), "leds"); |
| if (!nproot) { |
| dev_err(&pdev->dev, "failed to find leds node\n"); |
| return -ENODEV; |
| } |
| for_each_available_child_of_node_scoped(nproot, np) { |
| if (of_node_name_eq(np, data->name)) { |
| of_property_read_u32(np, "marvell,88pm860x-iset", |
| &iset); |
| data->iset = PM8606_LED_CURRENT(iset); |
| break; |
| } |
| } |
| of_node_put(nproot); |
| return 0; |
| } |
| #else |
| #define pm860x_led_dt_init(x, y) (-1) |
| #endif |
| |
| static int pm860x_led_probe(struct platform_device *pdev) |
| { |
| struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); |
| struct pm860x_led_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct pm860x_led *data; |
| struct resource *res; |
| int ret = 0; |
| |
| data = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_led), GFP_KERNEL); |
| if (data == NULL) |
| return -ENOMEM; |
| res = platform_get_resource_byname(pdev, IORESOURCE_REG, "control"); |
| if (!res) { |
| dev_err(&pdev->dev, "No REG resource for control\n"); |
| return -ENXIO; |
| } |
| data->reg_control = res->start; |
| res = platform_get_resource_byname(pdev, IORESOURCE_REG, "blink"); |
| if (!res) { |
| dev_err(&pdev->dev, "No REG resource for blink\n"); |
| return -ENXIO; |
| } |
| data->reg_blink = res->start; |
| memset(data->name, 0, MFD_NAME_SIZE); |
| switch (pdev->id) { |
| case 0: |
| data->blink_mask = LED1_BLINK_EN; |
| sprintf(data->name, "led0-red"); |
| break; |
| case 1: |
| data->blink_mask = LED1_BLINK_EN; |
| sprintf(data->name, "led0-green"); |
| break; |
| case 2: |
| data->blink_mask = LED1_BLINK_EN; |
| sprintf(data->name, "led0-blue"); |
| break; |
| case 3: |
| data->blink_mask = LED2_BLINK_EN; |
| sprintf(data->name, "led1-red"); |
| break; |
| case 4: |
| data->blink_mask = LED2_BLINK_EN; |
| sprintf(data->name, "led1-green"); |
| break; |
| case 5: |
| data->blink_mask = LED2_BLINK_EN; |
| sprintf(data->name, "led1-blue"); |
| break; |
| } |
| data->chip = chip; |
| data->i2c = (chip->id == CHIP_PM8606) ? chip->client : chip->companion; |
| data->port = pdev->id; |
| if (pm860x_led_dt_init(pdev, data)) |
| if (pdata) |
| data->iset = pdata->iset; |
| |
| data->current_brightness = 0; |
| data->cdev.name = data->name; |
| data->cdev.brightness_set_blocking = pm860x_led_set; |
| mutex_init(&data->lock); |
| |
| ret = led_classdev_register(chip->dev, &data->cdev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "Failed to register LED: %d\n", ret); |
| return ret; |
| } |
| pm860x_led_set(&data->cdev, 0); |
| |
| platform_set_drvdata(pdev, data); |
| |
| return 0; |
| } |
| |
| static void pm860x_led_remove(struct platform_device *pdev) |
| { |
| struct pm860x_led *data = platform_get_drvdata(pdev); |
| |
| led_classdev_unregister(&data->cdev); |
| } |
| |
| static struct platform_driver pm860x_led_driver = { |
| .driver = { |
| .name = "88pm860x-led", |
| }, |
| .probe = pm860x_led_probe, |
| .remove = pm860x_led_remove, |
| }; |
| |
| module_platform_driver(pm860x_led_driver); |
| |
| MODULE_DESCRIPTION("LED driver for Marvell PM860x"); |
| MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:88pm860x-led"); |