drivers/mmc/host/sdhci-iproc.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 // Copyright (C) 2014 Broadcom Corporation

 /*
  * iProc SDHCI platform driver
  */

 #include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/mmc/host.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include "sdhci-pltfm.h"

 struct sdhci_iproc_data {
 	const struct sdhci_pltfm_data *pdata;
 	u32 caps;
 	u32 caps1;
 	u32 mmc_caps;
 	bool missing_caps;
 };

 struct sdhci_iproc_host {
 	const struct sdhci_iproc_data *data;
 	u32 shadow_cmd;
 	u32 shadow_blk;
 	bool is_cmd_shadowed;
 	bool is_blk_shadowed;
 };

 #define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)

 static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
 {
 	u32 val = readl(host->ioaddr + reg);

 	pr_debug("%s: readl [0x%02x] 0x%08x\n",
 		 mmc_hostname(host->mmc), reg, val);
 	return val;
 }

 static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
 	u32 val;
 	u16 word;

 	if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
 		/* Get the saved transfer mode */
 		val = iproc_host->shadow_cmd;
 	} else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
 		   iproc_host->is_blk_shadowed) {
 		/* Get the saved block info */
 		val = iproc_host->shadow_blk;
 	} else {
 		val = sdhci_iproc_readl(host, (reg & ~3));
 	}
 	word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
 	return word;
 }

 static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
 {
 	u32 val = sdhci_iproc_readl(host, (reg & ~3));
 	u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
 	return byte;
 }

 static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg)
 {
 	pr_debug("%s: writel [0x%02x] 0x%08x\n",
 		 mmc_hostname(host->mmc), reg, val);

 	writel(val, host->ioaddr + reg);

 	if (host->clock <= 400000) {
 		/* Round up to micro-second four SD clock delay */
 		if (host->clock)
 			udelay((4 * 1000000 + host->clock - 1) / host->clock);
 		else
 			udelay(10);
 	}
 }

 /*
  * The Arasan has a bugette whereby it may lose the content of successive
  * writes to the same register that are within two SD-card clock cycles of
  * each other (a clock domain crossing problem). The data
  * register does not have this problem, which is just as well - otherwise we'd
  * have to nobble the DMA engine too.
  *
  * This wouldn't be a problem with the code except that we can only write the
  * controller with 32-bit writes.  So two different 16-bit registers are
  * written back to back creates the problem.
  *
  * In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
  * are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
  * The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
  * the work around can be further optimized. We can keep shadow values of
  * BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
  * Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
  * by the TRANSFER+COMMAND in another 32-bit write.
  */
 static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 	struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
 	u32 word_shift = REG_OFFSET_IN_BITS(reg);
 	u32 mask = 0xffff << word_shift;
 	u32 oldval, newval;

 	if (reg == SDHCI_COMMAND) {
 		/* Write the block now as we are issuing a command */
 		if (iproc_host->is_blk_shadowed) {
 			sdhci_iproc_writel(host, iproc_host->shadow_blk,
 				SDHCI_BLOCK_SIZE);
 			iproc_host->is_blk_shadowed = false;
 		}
 		oldval = iproc_host->shadow_cmd;
 		iproc_host->is_cmd_shadowed = false;
 	} else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
 		   iproc_host->is_blk_shadowed) {
 		/* Block size and count are stored in shadow reg */
 		oldval = iproc_host->shadow_blk;
 	} else {
 		/* Read reg, all other registers are not shadowed */
 		oldval = sdhci_iproc_readl(host, (reg & ~3));
 	}
 	newval = (oldval & ~mask) | (val << word_shift);

 	if (reg == SDHCI_TRANSFER_MODE) {
 		/* Save the transfer mode until the command is issued */
 		iproc_host->shadow_cmd = newval;
 		iproc_host->is_cmd_shadowed = true;
 	} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
 		/* Save the block info until the command is issued */
 		iproc_host->shadow_blk = newval;
 		iproc_host->is_blk_shadowed = true;
 	} else {
 		/* Command or other regular 32-bit write */
 		sdhci_iproc_writel(host, newval, reg & ~3);
 	}
 }

 static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
 {
 	u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
 	u32 byte_shift = REG_OFFSET_IN_BITS(reg);
 	u32 mask = 0xff << byte_shift;
 	u32 newval = (oldval & ~mask) | (val << byte_shift);

 	sdhci_iproc_writel(host, newval, reg & ~3);
 }

 static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
 {
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

 	if (pltfm_host->clk)
 		return sdhci_pltfm_clk_get_max_clock(host);
 	else
 		return pltfm_host->clock;
 }

 /*
  * There is a known bug on BCM2711's SDHCI core integration where the
  * controller will hang when the difference between the core clock and the bus
  * clock is too great. Specifically this can be reproduced under the following
  * conditions:
  *
  *  - No SD card plugged in, polling thread is running, probing cards at
  *    100 kHz.
  *  - BCM2711's core clock configured at 500MHz or more
  *
  * So we set 200kHz as the minimum clock frequency available for that SoC.
  */
 static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host)
 {
 	return 200000;
 }

 static const struct sdhci_ops sdhci_iproc_ops = {
 	.set_clock = sdhci_set_clock,
 	.get_max_clock = sdhci_iproc_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };

 static const struct sdhci_ops sdhci_iproc_32only_ops = {
 	.read_l = sdhci_iproc_readl,
 	.read_w = sdhci_iproc_readw,
 	.read_b = sdhci_iproc_readb,
 	.write_l = sdhci_iproc_writel,
 	.write_w = sdhci_iproc_writew,
 	.write_b = sdhci_iproc_writeb,
 	.set_clock = sdhci_set_clock,
 	.get_max_clock = sdhci_iproc_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };

 static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
 	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON,
 	.ops = &sdhci_iproc_32only_ops,
 };

 static const struct sdhci_iproc_data iproc_cygnus_data = {
 	.pdata = &sdhci_iproc_cygnus_pltfm_data,
 	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
 			& SDHCI_MAX_BLOCK_MASK) |
 		SDHCI_CAN_VDD_330 |
 		SDHCI_CAN_VDD_180 |
 		SDHCI_CAN_DO_SUSPEND |
 		SDHCI_CAN_DO_HISPD |
 		SDHCI_CAN_DO_ADMA2 |
 		SDHCI_CAN_DO_SDMA,
 	.caps1 = SDHCI_DRIVER_TYPE_C |
 		 SDHCI_DRIVER_TYPE_D |
 		 SDHCI_SUPPORT_DDR50,
 	.mmc_caps = MMC_CAP_1_8V_DDR,
 };

 static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
 	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
 		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
 	.ops = &sdhci_iproc_ops,
 };

 static const struct sdhci_iproc_data iproc_data = {
 	.pdata = &sdhci_iproc_pltfm_data,
 	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
 			& SDHCI_MAX_BLOCK_MASK) |
 		SDHCI_CAN_VDD_330 |
 		SDHCI_CAN_VDD_180 |
 		SDHCI_CAN_DO_SUSPEND |
 		SDHCI_CAN_DO_HISPD |
 		SDHCI_CAN_DO_ADMA2 |
 		SDHCI_CAN_DO_SDMA,
 	.caps1 = SDHCI_DRIVER_TYPE_C |
 		 SDHCI_DRIVER_TYPE_D |
 		 SDHCI_SUPPORT_DDR50,
 };

 static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_iproc_32only_ops,
 };

 static const struct sdhci_iproc_data bcm2835_data = {
 	.pdata = &sdhci_bcm2835_pltfm_data,
 	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
 			& SDHCI_MAX_BLOCK_MASK) |
 		SDHCI_CAN_VDD_330 |
 		SDHCI_CAN_DO_HISPD,
 	.caps1 = SDHCI_DRIVER_TYPE_A |
 		 SDHCI_DRIVER_TYPE_C,
 	.mmc_caps = 0x00000000,
 	.missing_caps = true,
 };

 static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
 	.read_l = sdhci_iproc_readl,
 	.read_w = sdhci_iproc_readw,
 	.read_b = sdhci_iproc_readb,
 	.write_l = sdhci_iproc_writel,
 	.write_w = sdhci_iproc_writew,
 	.write_b = sdhci_iproc_writeb,
 	.set_clock = sdhci_set_clock,
 	.set_power = sdhci_set_power_and_bus_voltage,
 	.get_max_clock = sdhci_iproc_get_max_clock,
 	.get_min_clock = sdhci_iproc_bcm2711_get_min_clock,
 	.set_bus_width = sdhci_set_bus_width,
 	.reset = sdhci_reset,
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };

 static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
 	.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
 	.ops = &sdhci_iproc_bcm2711_ops,
 };

 static const struct sdhci_iproc_data bcm2711_data = {
 	.pdata = &sdhci_bcm2711_pltfm_data,
 	.mmc_caps = MMC_CAP_3_3V_DDR,
 };

 static const struct sdhci_pltfm_data sdhci_bcm7211a0_pltfm_data = {
 	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
 		SDHCI_QUIRK_BROKEN_DMA |
 		SDHCI_QUIRK_BROKEN_ADMA,
 	.ops = &sdhci_iproc_ops,
 };

 #define BCM7211A0_BASE_CLK_MHZ 100
 static const struct sdhci_iproc_data bcm7211a0_data = {
 	.pdata = &sdhci_bcm7211a0_pltfm_data,
 	.caps = ((BCM7211A0_BASE_CLK_MHZ / 2) << SDHCI_TIMEOUT_CLK_SHIFT) |
 		(BCM7211A0_BASE_CLK_MHZ << SDHCI_CLOCK_BASE_SHIFT) |
 		((0x2 << SDHCI_MAX_BLOCK_SHIFT)
 			& SDHCI_MAX_BLOCK_MASK) |
 		SDHCI_CAN_VDD_330 |
 		SDHCI_CAN_VDD_180 |
 		SDHCI_CAN_DO_SUSPEND |
 		SDHCI_CAN_DO_HISPD,
 	.caps1 = SDHCI_DRIVER_TYPE_C |
 		 SDHCI_DRIVER_TYPE_D,
 	.missing_caps = true,
 };

 static const struct of_device_id sdhci_iproc_of_match[] = {
 	{ .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data },
 	{ .compatible = "brcm,bcm2711-emmc2", .data = &bcm2711_data },
 	{ .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data},
 	{ .compatible = "brcm,sdhci-iproc", .data = &iproc_data },
 	{ .compatible = "brcm,bcm7211a0-sdhci", .data = &bcm7211a0_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);

 #ifdef CONFIG_ACPI
 /*
  * This is a duplicate of bcm2835_(pltfrm_)data without caps quirks
  * which are provided by the ACPI table.
  */
 static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
 		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_iproc_32only_ops,
 };

 static const struct sdhci_iproc_data bcm_arasan_data = {
 	.pdata = &sdhci_bcm_arasan_data,
 };

 static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
 	{ .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
 	{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
 	{ .id = "BCM2847",  .driver_data = (kernel_ulong_t)&bcm_arasan_data },
 	{ .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
 #endif

 static int sdhci_iproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	const struct sdhci_iproc_data *iproc_data = NULL;
 	struct sdhci_host *host;
 	struct sdhci_iproc_host *iproc_host;
 	struct sdhci_pltfm_host *pltfm_host;
 	int ret;

 	iproc_data = device_get_match_data(dev);
 	if (!iproc_data)
 		return -ENODEV;

 	host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
 	if (IS_ERR(host))
 		return PTR_ERR(host);

 	pltfm_host = sdhci_priv(host);
 	iproc_host = sdhci_pltfm_priv(pltfm_host);

 	iproc_host->data = iproc_data;

 	ret = mmc_of_parse(host->mmc);
 	if (ret)
 		goto err;

 	sdhci_get_property(pdev);

 	host->mmc->caps |= iproc_host->data->mmc_caps;

 	if (dev->of_node) {
 		pltfm_host->clk = devm_clk_get_enabled(dev, NULL);
 		if (IS_ERR(pltfm_host->clk)) {
 			ret = PTR_ERR(pltfm_host->clk);
 			goto err;
 		}
 	}

 	if (iproc_host->data->missing_caps) {
 		__sdhci_read_caps(host, NULL,
 				  &iproc_host->data->caps,
 				  &iproc_host->data->caps1);
 	}

 	ret = sdhci_add_host(host);
 	if (ret)
 		goto err;

 	return 0;

 err:
 	sdhci_pltfm_free(pdev);
 	return ret;
 }

 static void sdhci_iproc_shutdown(struct platform_device *pdev)
 {
 	sdhci_pltfm_suspend(&pdev->dev);
 }

 static struct platform_driver sdhci_iproc_driver = {
 	.driver = {
 		.name = "sdhci-iproc",
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 		.of_match_table = sdhci_iproc_of_match,
 		.acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
 		.pm = &sdhci_pltfm_pmops,
 	},
 	.probe = sdhci_iproc_probe,
 	.remove = sdhci_pltfm_remove,
 	.shutdown = sdhci_iproc_shutdown,
 };
 module_platform_driver(sdhci_iproc_driver);

 MODULE_AUTHOR("Broadcom");
 MODULE_DESCRIPTION("IPROC SDHCI driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	// Copyright (C) 2014 Broadcom Corporation

	/*
	* iProc SDHCI platform driver
	*/

	#include <linux/acpi.h>
	#include <linux/delay.h>
	#include <linux/module.h>
	#include <linux/mmc/host.h>
	#include <linux/of.h>
	#include <linux/platform_device.h>
	#include "sdhci-pltfm.h"

	struct sdhci_iproc_data {
	const struct sdhci_pltfm_data *pdata;
	u32 caps;
	u32 caps1;
	u32 mmc_caps;
	bool missing_caps;
	};

	struct sdhci_iproc_host {
	const struct sdhci_iproc_data *data;
	u32 shadow_cmd;
	u32 shadow_blk;
	bool is_cmd_shadowed;
	bool is_blk_shadowed;
	};

	#define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)

	static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg)
	{
	u32 val = readl(host->ioaddr + reg);

	pr_debug("%s: readl [0x%02x] 0x%08x\n",
	mmc_hostname(host->mmc), reg, val);
	return val;
	}

	static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
	u32 val;
	u16 word;

	if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
	/* Get the saved transfer mode */
	val = iproc_host->shadow_cmd;
	} else if ((reg == SDHCI_BLOCK_SIZE \|\| reg == SDHCI_BLOCK_COUNT) &&
	iproc_host->is_blk_shadowed) {
	/* Get the saved block info */
	val = iproc_host->shadow_blk;
	} else {
	val = sdhci_iproc_readl(host, (reg & ~3));
	}
	word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
	return word;
	}

	static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
	{
	u32 val = sdhci_iproc_readl(host, (reg & ~3));
	u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
	return byte;
	}

	static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg)
	{
	pr_debug("%s: writel [0x%02x] 0x%08x\n",
	mmc_hostname(host->mmc), reg, val);

	writel(val, host->ioaddr + reg);

	if (host->clock <= 400000) {
	/* Round up to micro-second four SD clock delay */
	if (host->clock)
	udelay((4 * 1000000 + host->clock - 1) / host->clock);
	else
	udelay(10);
	}
	}

	/*
	* The Arasan has a bugette whereby it may lose the content of successive
	* writes to the same register that are within two SD-card clock cycles of
	* each other (a clock domain crossing problem). The data
	* register does not have this problem, which is just as well - otherwise we'd
	* have to nobble the DMA engine too.
	*
	* This wouldn't be a problem with the code except that we can only write the
	* controller with 32-bit writes. So two different 16-bit registers are
	* written back to back creates the problem.
	*
	* In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
	* are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
	* The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
	* the work around can be further optimized. We can keep shadow values of
	* BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
	* Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
	* by the TRANSFER+COMMAND in another 32-bit write.
	*/
	static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
	struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
	u32 word_shift = REG_OFFSET_IN_BITS(reg);
	u32 mask = 0xffff << word_shift;
	u32 oldval, newval;

	if (reg == SDHCI_COMMAND) {
	/* Write the block now as we are issuing a command */
	if (iproc_host->is_blk_shadowed) {
	sdhci_iproc_writel(host, iproc_host->shadow_blk,
	SDHCI_BLOCK_SIZE);
	iproc_host->is_blk_shadowed = false;
	}
	oldval = iproc_host->shadow_cmd;
	iproc_host->is_cmd_shadowed = false;
	} else if ((reg == SDHCI_BLOCK_SIZE \|\| reg == SDHCI_BLOCK_COUNT) &&
	iproc_host->is_blk_shadowed) {
	/* Block size and count are stored in shadow reg */
	oldval = iproc_host->shadow_blk;
	} else {
	/* Read reg, all other registers are not shadowed */
	oldval = sdhci_iproc_readl(host, (reg & ~3));
	}
	newval = (oldval & ~mask) \| (val << word_shift);

	if (reg == SDHCI_TRANSFER_MODE) {
	/* Save the transfer mode until the command is issued */
	iproc_host->shadow_cmd = newval;
	iproc_host->is_cmd_shadowed = true;
	} else if (reg == SDHCI_BLOCK_SIZE \|\| reg == SDHCI_BLOCK_COUNT) {
	/* Save the block info until the command is issued */
	iproc_host->shadow_blk = newval;
	iproc_host->is_blk_shadowed = true;
	} else {
	/* Command or other regular 32-bit write */
	sdhci_iproc_writel(host, newval, reg & ~3);
	}
	}

	static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
	{
	u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
	u32 byte_shift = REG_OFFSET_IN_BITS(reg);
	u32 mask = 0xff << byte_shift;
	u32 newval = (oldval & ~mask) \| (val << byte_shift);

	sdhci_iproc_writel(host, newval, reg & ~3);
	}

	static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host)
	{
	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);

	if (pltfm_host->clk)
	return sdhci_pltfm_clk_get_max_clock(host);
	else
	return pltfm_host->clock;
	}

	/*
	* There is a known bug on BCM2711's SDHCI core integration where the
	* controller will hang when the difference between the core clock and the bus
	* clock is too great. Specifically this can be reproduced under the following
	* conditions:
	*
	* - No SD card plugged in, polling thread is running, probing cards at
	* 100 kHz.
	* - BCM2711's core clock configured at 500MHz or more
	*
	* So we set 200kHz as the minimum clock frequency available for that SoC.
	*/
	static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host)
	{
	return 200000;
	}

	static const struct sdhci_ops sdhci_iproc_ops = {
	.set_clock = sdhci_set_clock,
	.get_max_clock = sdhci_iproc_get_max_clock,
	.set_bus_width = sdhci_set_bus_width,
	.reset = sdhci_reset,
	.set_uhs_signaling = sdhci_set_uhs_signaling,
	};

	static const struct sdhci_ops sdhci_iproc_32only_ops = {
	.read_l = sdhci_iproc_readl,
	.read_w = sdhci_iproc_readw,
	.read_b = sdhci_iproc_readb,
	.write_l = sdhci_iproc_writel,
	.write_w = sdhci_iproc_writew,
	.write_b = sdhci_iproc_writeb,
	.set_clock = sdhci_set_clock,
	.get_max_clock = sdhci_iproc_get_max_clock,
	.set_bus_width = sdhci_set_bus_width,
	.reset = sdhci_reset,
	.set_uhs_signaling = sdhci_set_uhs_signaling,
	};

	static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = {
	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK \|
	SDHCI_QUIRK_NO_HISPD_BIT,
	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN \| SDHCI_QUIRK2_HOST_OFF_CARD_ON,
	.ops = &sdhci_iproc_32only_ops,
	};

	static const struct sdhci_iproc_data iproc_cygnus_data = {
	.pdata = &sdhci_iproc_cygnus_pltfm_data,
	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
	& SDHCI_MAX_BLOCK_MASK) \|
	SDHCI_CAN_VDD_330 \|
	SDHCI_CAN_VDD_180 \|
	SDHCI_CAN_DO_SUSPEND \|
	SDHCI_CAN_DO_HISPD \|
	SDHCI_CAN_DO_ADMA2 \|
	SDHCI_CAN_DO_SDMA,
	.caps1 = SDHCI_DRIVER_TYPE_C \|
	SDHCI_DRIVER_TYPE_D \|
	SDHCI_SUPPORT_DDR50,
	.mmc_caps = MMC_CAP_1_8V_DDR,
	};

	static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
	.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK \|
	SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 \|
	SDHCI_QUIRK_NO_HISPD_BIT,
	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
	.ops = &sdhci_iproc_ops,
	};

	static const struct sdhci_iproc_data iproc_data = {
	.pdata = &sdhci_iproc_pltfm_data,
	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
	& SDHCI_MAX_BLOCK_MASK) \|
	SDHCI_CAN_VDD_330 \|
	SDHCI_CAN_VDD_180 \|
	SDHCI_CAN_DO_SUSPEND \|
	SDHCI_CAN_DO_HISPD \|
	SDHCI_CAN_DO_ADMA2 \|
	SDHCI_CAN_DO_SDMA,
	.caps1 = SDHCI_DRIVER_TYPE_C \|
	SDHCI_DRIVER_TYPE_D \|
	SDHCI_SUPPORT_DDR50,
	};

	static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION \|
	SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK \|
	SDHCI_QUIRK_NO_HISPD_BIT,
	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
	.ops = &sdhci_iproc_32only_ops,
	};

	static const struct sdhci_iproc_data bcm2835_data = {
	.pdata = &sdhci_bcm2835_pltfm_data,
	.caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT)
	& SDHCI_MAX_BLOCK_MASK) \|
	SDHCI_CAN_VDD_330 \|
	SDHCI_CAN_DO_HISPD,
	.caps1 = SDHCI_DRIVER_TYPE_A \|
	SDHCI_DRIVER_TYPE_C,
	.mmc_caps = 0x00000000,
	.missing_caps = true,
	};

	static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
	.read_l = sdhci_iproc_readl,
	.read_w = sdhci_iproc_readw,
	.read_b = sdhci_iproc_readb,
	.write_l = sdhci_iproc_writel,
	.write_w = sdhci_iproc_writew,
	.write_b = sdhci_iproc_writeb,
	.set_clock = sdhci_set_clock,
	.set_power = sdhci_set_power_and_bus_voltage,
	.get_max_clock = sdhci_iproc_get_max_clock,
	.get_min_clock = sdhci_iproc_bcm2711_get_min_clock,
	.set_bus_width = sdhci_set_bus_width,
	.reset = sdhci_reset,
	.set_uhs_signaling = sdhci_set_uhs_signaling,
	};

	static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = {
	.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
	.ops = &sdhci_iproc_bcm2711_ops,
	};

	static const struct sdhci_iproc_data bcm2711_data = {
	.pdata = &sdhci_bcm2711_pltfm_data,
	.mmc_caps = MMC_CAP_3_3V_DDR,
	};

	static const struct sdhci_pltfm_data sdhci_bcm7211a0_pltfm_data = {
	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL \|
	SDHCI_QUIRK_BROKEN_DMA \|
	SDHCI_QUIRK_BROKEN_ADMA,
	.ops = &sdhci_iproc_ops,
	};

	#define BCM7211A0_BASE_CLK_MHZ 100
	static const struct sdhci_iproc_data bcm7211a0_data = {
	.pdata = &sdhci_bcm7211a0_pltfm_data,
	.caps = ((BCM7211A0_BASE_CLK_MHZ / 2) << SDHCI_TIMEOUT_CLK_SHIFT) \|
	(BCM7211A0_BASE_CLK_MHZ << SDHCI_CLOCK_BASE_SHIFT) \|
	((0x2 << SDHCI_MAX_BLOCK_SHIFT)
	& SDHCI_MAX_BLOCK_MASK) \|
	SDHCI_CAN_VDD_330 \|
	SDHCI_CAN_VDD_180 \|
	SDHCI_CAN_DO_SUSPEND \|
	SDHCI_CAN_DO_HISPD,
	.caps1 = SDHCI_DRIVER_TYPE_C \|
	SDHCI_DRIVER_TYPE_D,
	.missing_caps = true,
	};

	static const struct of_device_id sdhci_iproc_of_match[] = {
	{ .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data },
	{ .compatible = "brcm,bcm2711-emmc2", .data = &bcm2711_data },
	{ .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data},
	{ .compatible = "brcm,sdhci-iproc", .data = &iproc_data },
	{ .compatible = "brcm,bcm7211a0-sdhci", .data = &bcm7211a0_data },
	{ }
	};
	MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match);

	#ifdef CONFIG_ACPI
	/*
	* This is a duplicate of bcm2835_(pltfrm_)data without caps quirks
	* which are provided by the ACPI table.
	*/
	static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = {
	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION \|
	SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK \|
	SDHCI_QUIRK_NO_HISPD_BIT,
	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
	.ops = &sdhci_iproc_32only_ops,
	};

	static const struct sdhci_iproc_data bcm_arasan_data = {
	.pdata = &sdhci_bcm_arasan_data,
	};

	static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
	{ .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data },
	{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
	{ .id = "BCM2847", .driver_data = (kernel_ulong_t)&bcm_arasan_data },
	{ .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data },
	{ /* sentinel */ }
	};
	MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
	#endif

	static int sdhci_iproc_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	const struct sdhci_iproc_data *iproc_data = NULL;
	struct sdhci_host *host;
	struct sdhci_iproc_host *iproc_host;
	struct sdhci_pltfm_host *pltfm_host;
	int ret;

	iproc_data = device_get_match_data(dev);
	if (!iproc_data)
	return -ENODEV;

	host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host));
	if (IS_ERR(host))
	return PTR_ERR(host);

	pltfm_host = sdhci_priv(host);
	iproc_host = sdhci_pltfm_priv(pltfm_host);

	iproc_host->data = iproc_data;

	ret = mmc_of_parse(host->mmc);
	if (ret)
	goto err;

	sdhci_get_property(pdev);

	host->mmc->caps \|= iproc_host->data->mmc_caps;

	if (dev->of_node) {
	pltfm_host->clk = devm_clk_get_enabled(dev, NULL);
	if (IS_ERR(pltfm_host->clk)) {
	ret = PTR_ERR(pltfm_host->clk);
	goto err;
	}
	}

	if (iproc_host->data->missing_caps) {
	__sdhci_read_caps(host, NULL,
	&iproc_host->data->caps,
	&iproc_host->data->caps1);
	}

	ret = sdhci_add_host(host);
	if (ret)
	goto err;

	return 0;

	err:
	sdhci_pltfm_free(pdev);
	return ret;
	}

	static void sdhci_iproc_shutdown(struct platform_device *pdev)
	{
	sdhci_pltfm_suspend(&pdev->dev);
	}

	static struct platform_driver sdhci_iproc_driver = {
	.driver = {
	.name = "sdhci-iproc",
	.probe_type = PROBE_PREFER_ASYNCHRONOUS,
	.of_match_table = sdhci_iproc_of_match,
	.acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids),
	.pm = &sdhci_pltfm_pmops,
	},
	.probe = sdhci_iproc_probe,
	.remove = sdhci_pltfm_remove,
	.shutdown = sdhci_iproc_shutdown,
	};
	module_platform_driver(sdhci_iproc_driver);

	MODULE_AUTHOR("Broadcom");
	MODULE_DESCRIPTION("IPROC SDHCI driver");
	MODULE_LICENSE("GPL v2");