| // SPDX-License-Identifier: GPL-2.0 |
| #include <linux/mm.h> |
| #include <linux/mmzone.h> |
| #include <linux/page_reporting.h> |
| #include <linux/gfp.h> |
| #include <linux/export.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/scatterlist.h> |
| #include <linux/mem_relinquish.h> |
| |
| #include "page_reporting.h" |
| #include "internal.h" |
| |
| /* Initialize to an unsupported value */ |
| unsigned int page_reporting_order = -1; |
| |
| static int page_order_update_notify(const char *val, const struct kernel_param *kp) |
| { |
| /* |
| * If param is set beyond this limit, order is set to default |
| * pageblock_order value |
| */ |
| return param_set_uint_minmax(val, kp, 0, MAX_ORDER); |
| } |
| |
| static const struct kernel_param_ops page_reporting_param_ops = { |
| .set = &page_order_update_notify, |
| /* |
| * For the get op, use param_get_int instead of param_get_uint. |
| * This is to make sure that when unset the initialized value of |
| * -1 is shown correctly |
| */ |
| .get = ¶m_get_int, |
| }; |
| |
| module_param_cb(page_reporting_order, &page_reporting_param_ops, |
| &page_reporting_order, 0644); |
| MODULE_PARM_DESC(page_reporting_order, "Set page reporting order"); |
| |
| /* |
| * This symbol is also a kernel parameter. Export the page_reporting_order |
| * symbol so that other drivers can access it to control order values without |
| * having to introduce another configurable parameter. Only one driver can |
| * register with the page_reporting driver for the service, so we have just |
| * one control parameter for the use case(which can be accessed in both |
| * drivers) |
| */ |
| EXPORT_SYMBOL_GPL(page_reporting_order); |
| |
| #define PAGE_REPORTING_DELAY (2 * HZ) |
| static struct page_reporting_dev_info __rcu *pr_dev_info __read_mostly; |
| |
| enum { |
| PAGE_REPORTING_IDLE = 0, |
| PAGE_REPORTING_REQUESTED, |
| PAGE_REPORTING_ACTIVE |
| }; |
| |
| /* request page reporting */ |
| static void |
| __page_reporting_request(struct page_reporting_dev_info *prdev) |
| { |
| unsigned int state; |
| |
| /* Check to see if we are in desired state */ |
| state = atomic_read(&prdev->state); |
| if (state == PAGE_REPORTING_REQUESTED) |
| return; |
| |
| /* |
| * If reporting is already active there is nothing we need to do. |
| * Test against 0 as that represents PAGE_REPORTING_IDLE. |
| */ |
| state = atomic_xchg(&prdev->state, PAGE_REPORTING_REQUESTED); |
| if (state != PAGE_REPORTING_IDLE) |
| return; |
| |
| /* |
| * Delay the start of work to allow a sizable queue to build. For |
| * now we are limiting this to running no more than once every |
| * couple of seconds. |
| */ |
| schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY); |
| } |
| |
| /* notify prdev of free page reporting request */ |
| void __page_reporting_notify(void) |
| { |
| struct page_reporting_dev_info *prdev; |
| |
| /* |
| * We use RCU to protect the pr_dev_info pointer. In almost all |
| * cases this should be present, however in the unlikely case of |
| * a shutdown this will be NULL and we should exit. |
| */ |
| rcu_read_lock(); |
| prdev = rcu_dereference(pr_dev_info); |
| if (likely(prdev)) |
| __page_reporting_request(prdev); |
| |
| rcu_read_unlock(); |
| } |
| |
| static void |
| page_reporting_drain(struct page_reporting_dev_info *prdev, |
| struct scatterlist *sgl, unsigned int nents, bool reported) |
| { |
| struct scatterlist *sg = sgl; |
| |
| /* |
| * Drain the now reported pages back into their respective |
| * free lists/areas. We assume at least one page is populated. |
| */ |
| do { |
| struct page *page = sg_page(sg); |
| int mt = get_pageblock_migratetype(page); |
| unsigned int order = get_order(sg->length); |
| |
| __putback_isolated_page(page, order, mt); |
| |
| /* If the pages were not reported due to error skip flagging */ |
| if (!reported) |
| continue; |
| |
| /* |
| * If page was not comingled with another page we can |
| * consider the result to be "reported" since the page |
| * hasn't been modified, otherwise we will need to |
| * report on the new larger page when we make our way |
| * up to that higher order. |
| */ |
| if (PageBuddy(page) && buddy_order(page) == order) |
| __SetPageReported(page); |
| } while ((sg = sg_next(sg))); |
| |
| /* reinitialize scatterlist now that it is empty */ |
| sg_init_table(sgl, nents); |
| } |
| |
| /* |
| * The page reporting cycle consists of 4 stages, fill, report, drain, and |
| * idle. We will cycle through the first 3 stages until we cannot obtain a |
| * full scatterlist of pages, in that case we will switch to idle. |
| */ |
| static int |
| page_reporting_cycle(struct page_reporting_dev_info *prdev, struct zone *zone, |
| unsigned int order, unsigned int mt, |
| struct scatterlist *sgl, unsigned int *offset) |
| { |
| struct free_area *area = &zone->free_area[order]; |
| struct list_head *list = &area->free_list[mt]; |
| unsigned int page_len = PAGE_SIZE << order; |
| struct page *page, *next; |
| long budget; |
| int i, err = 0; |
| |
| /* |
| * Perform early check, if free area is empty there is |
| * nothing to process so we can skip this free_list. |
| */ |
| if (list_empty(list)) |
| return err; |
| |
| spin_lock_irq(&zone->lock); |
| |
| /* |
| * Limit how many calls we will be making to the page reporting |
| * device for this list. By doing this we avoid processing any |
| * given list for too long. |
| * |
| * The current value used allows us enough calls to process over a |
| * sixteenth of the current list plus one additional call to handle |
| * any pages that may have already been present from the previous |
| * list processed. This should result in us reporting all pages on |
| * an idle system in about 30 seconds. |
| * |
| * The division here should be cheap since PAGE_REPORTING_CAPACITY |
| * should always be a power of 2. |
| */ |
| budget = DIV_ROUND_UP(area->nr_free, PAGE_REPORTING_CAPACITY * 16); |
| |
| /* loop through free list adding unreported pages to sg list */ |
| list_for_each_entry_safe(page, next, list, lru) { |
| /* We are going to skip over the reported pages. */ |
| if (PageReported(page)) |
| continue; |
| |
| /* |
| * If we fully consumed our budget then update our |
| * state to indicate that we are requesting additional |
| * processing and exit this list. |
| */ |
| if (budget < 0) { |
| atomic_set(&prdev->state, PAGE_REPORTING_REQUESTED); |
| next = page; |
| break; |
| } |
| |
| /* Attempt to pull page from list and place in scatterlist */ |
| if (*offset) { |
| if (!__isolate_free_page(page, order)) { |
| next = page; |
| break; |
| } |
| |
| /* Add page to scatter list */ |
| --(*offset); |
| sg_set_page(&sgl[*offset], page, page_len, 0); |
| |
| /* Notify hyp that these pages are reclaimable. */ |
| for (i = 0; i < (1<<order); i++) |
| page_relinquish(page+i); |
| |
| continue; |
| } |
| |
| /* |
| * Make the first non-reported page in the free list |
| * the new head of the free list before we release the |
| * zone lock. |
| */ |
| if (!list_is_first(&page->lru, list)) |
| list_rotate_to_front(&page->lru, list); |
| |
| /* release lock before waiting on report processing */ |
| spin_unlock_irq(&zone->lock); |
| |
| /* begin processing pages in local list */ |
| err = prdev->report(prdev, sgl, PAGE_REPORTING_CAPACITY); |
| |
| /* reset offset since the full list was reported */ |
| *offset = PAGE_REPORTING_CAPACITY; |
| |
| /* update budget to reflect call to report function */ |
| budget--; |
| |
| /* reacquire zone lock and resume processing */ |
| spin_lock_irq(&zone->lock); |
| |
| /* flush reported pages from the sg list */ |
| page_reporting_drain(prdev, sgl, PAGE_REPORTING_CAPACITY, !err); |
| |
| /* |
| * Reset next to first entry, the old next isn't valid |
| * since we dropped the lock to report the pages |
| */ |
| next = list_first_entry(list, struct page, lru); |
| |
| /* exit on error */ |
| if (err) |
| break; |
| } |
| |
| /* Rotate any leftover pages to the head of the freelist */ |
| if (!list_entry_is_head(next, list, lru) && !list_is_first(&next->lru, list)) |
| list_rotate_to_front(&next->lru, list); |
| |
| spin_unlock_irq(&zone->lock); |
| |
| return err; |
| } |
| |
| static int |
| page_reporting_process_zone(struct page_reporting_dev_info *prdev, |
| struct scatterlist *sgl, struct zone *zone) |
| { |
| unsigned int order, mt, leftover, offset = PAGE_REPORTING_CAPACITY; |
| unsigned long watermark; |
| int err = 0; |
| |
| /* Generate minimum watermark to be able to guarantee progress */ |
| watermark = low_wmark_pages(zone) + |
| (PAGE_REPORTING_CAPACITY << page_reporting_order); |
| |
| /* |
| * Cancel request if insufficient free memory or if we failed |
| * to allocate page reporting statistics for the zone. |
| */ |
| if (!zone_watermark_ok(zone, 0, watermark, 0, ALLOC_CMA)) |
| return err; |
| |
| /* Process each free list starting from lowest order/mt */ |
| for (order = page_reporting_order; order <= MAX_ORDER; order++) { |
| for (mt = 0; mt < MIGRATE_TYPES; mt++) { |
| /* We do not pull pages from the isolate free list */ |
| if (is_migrate_isolate(mt)) |
| continue; |
| |
| err = page_reporting_cycle(prdev, zone, order, mt, |
| sgl, &offset); |
| if (err) |
| return err; |
| } |
| } |
| |
| /* report the leftover pages before going idle */ |
| leftover = PAGE_REPORTING_CAPACITY - offset; |
| if (leftover) { |
| sgl = &sgl[offset]; |
| err = prdev->report(prdev, sgl, leftover); |
| |
| /* flush any remaining pages out from the last report */ |
| spin_lock_irq(&zone->lock); |
| page_reporting_drain(prdev, sgl, leftover, !err); |
| spin_unlock_irq(&zone->lock); |
| } |
| |
| return err; |
| } |
| |
| static void page_reporting_process(struct work_struct *work) |
| { |
| struct delayed_work *d_work = to_delayed_work(work); |
| struct page_reporting_dev_info *prdev = |
| container_of(d_work, struct page_reporting_dev_info, work); |
| int err = 0, state = PAGE_REPORTING_ACTIVE; |
| struct scatterlist *sgl; |
| struct zone *zone; |
| |
| /* |
| * Change the state to "Active" so that we can track if there is |
| * anyone requests page reporting after we complete our pass. If |
| * the state is not altered by the end of the pass we will switch |
| * to idle and quit scheduling reporting runs. |
| */ |
| atomic_set(&prdev->state, state); |
| |
| /* allocate scatterlist to store pages being reported on */ |
| sgl = kmalloc_array(PAGE_REPORTING_CAPACITY, sizeof(*sgl), GFP_KERNEL); |
| if (!sgl) |
| goto err_out; |
| |
| sg_init_table(sgl, PAGE_REPORTING_CAPACITY); |
| |
| for_each_zone(zone) { |
| err = page_reporting_process_zone(prdev, sgl, zone); |
| if (err) |
| break; |
| } |
| |
| kfree(sgl); |
| err_out: |
| /* |
| * If the state has reverted back to requested then there may be |
| * additional pages to be processed. We will defer for 2s to allow |
| * more pages to accumulate. |
| */ |
| state = atomic_cmpxchg(&prdev->state, state, PAGE_REPORTING_IDLE); |
| if (state == PAGE_REPORTING_REQUESTED) |
| schedule_delayed_work(&prdev->work, PAGE_REPORTING_DELAY); |
| } |
| |
| static DEFINE_MUTEX(page_reporting_mutex); |
| DEFINE_STATIC_KEY_FALSE(page_reporting_enabled); |
| |
| int page_reporting_register(struct page_reporting_dev_info *prdev) |
| { |
| int err = 0; |
| |
| mutex_lock(&page_reporting_mutex); |
| |
| /* nothing to do if already in use */ |
| if (rcu_dereference_protected(pr_dev_info, |
| lockdep_is_held(&page_reporting_mutex))) { |
| err = -EBUSY; |
| goto err_out; |
| } |
| |
| /* |
| * If the page_reporting_order value is not set, we check if |
| * an order is provided from the driver that is performing the |
| * registration. If that is not provided either, we default to |
| * pageblock_order. |
| */ |
| |
| if (page_reporting_order == -1) { |
| if (prdev->order > 0 && prdev->order <= MAX_ORDER) |
| page_reporting_order = prdev->order; |
| else |
| page_reporting_order = pageblock_order; |
| } |
| |
| /* initialize state and work structures */ |
| atomic_set(&prdev->state, PAGE_REPORTING_IDLE); |
| INIT_DELAYED_WORK(&prdev->work, &page_reporting_process); |
| |
| /* Begin initial flush of zones */ |
| __page_reporting_request(prdev); |
| |
| /* Assign device to allow notifications */ |
| rcu_assign_pointer(pr_dev_info, prdev); |
| |
| /* enable page reporting notification */ |
| if (!static_key_enabled(&page_reporting_enabled)) { |
| static_branch_enable(&page_reporting_enabled); |
| pr_info("Free page reporting enabled\n"); |
| } |
| err_out: |
| mutex_unlock(&page_reporting_mutex); |
| |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(page_reporting_register); |
| |
| void page_reporting_unregister(struct page_reporting_dev_info *prdev) |
| { |
| mutex_lock(&page_reporting_mutex); |
| |
| if (prdev == rcu_dereference_protected(pr_dev_info, |
| lockdep_is_held(&page_reporting_mutex))) { |
| /* Disable page reporting notification */ |
| RCU_INIT_POINTER(pr_dev_info, NULL); |
| synchronize_rcu(); |
| |
| /* Flush any existing work, and lock it out */ |
| cancel_delayed_work_sync(&prdev->work); |
| } |
| |
| mutex_unlock(&page_reporting_mutex); |
| } |
| EXPORT_SYMBOL_GPL(page_reporting_unregister); |