drivers/pwm/pwm-atmel-tcb.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) Overkiz SAS 2012
  *
  * Author: Boris BREZILLON <b.brezillon@overkiz.com>
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>

 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/mfd/syscon.h>
 #include <linux/platform_device.h>
 #include <linux/pwm.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <soc/at91/atmel_tcb.h>

 #define NPWM	2

 #define ATMEL_TC_ACMR_MASK	(ATMEL_TC_ACPA | ATMEL_TC_ACPC |	\
 				 ATMEL_TC_AEEVT | ATMEL_TC_ASWTRG)

 #define ATMEL_TC_BCMR_MASK	(ATMEL_TC_BCPB | ATMEL_TC_BCPC |	\
 				 ATMEL_TC_BEEVT | ATMEL_TC_BSWTRG)

 struct atmel_tcb_pwm_device {
 	unsigned div;			/* PWM clock divider */
 	unsigned duty;			/* PWM duty expressed in clk cycles */
 	unsigned period;		/* PWM period expressed in clk cycles */
 };

 struct atmel_tcb_channel {
 	u32 enabled;
 	u32 cmr;
 	u32 ra;
 	u32 rb;
 	u32 rc;
 };

 struct atmel_tcb_pwm_chip {
 	spinlock_t lock;
 	u8 channel;
 	u8 width;
 	struct regmap *regmap;
 	struct clk *clk;
 	struct clk *gclk;
 	struct clk *slow_clk;
 	struct atmel_tcb_pwm_device pwms[NPWM];
 	struct atmel_tcb_channel bkup;
 };

 static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };

 static inline struct atmel_tcb_pwm_chip *to_tcb_chip(struct pwm_chip *chip)
 {
 	return pwmchip_get_drvdata(chip);
 }

 static int atmel_tcb_pwm_request(struct pwm_chip *chip,
 				 struct pwm_device *pwm)
 {
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
 	unsigned cmr;
 	int ret;

 	ret = clk_prepare_enable(tcbpwmc->clk);
 	if (ret)
 		return ret;

 	tcbpwm->duty = 0;
 	tcbpwm->period = 0;
 	tcbpwm->div = 0;

 	guard(spinlock)(&tcbpwmc->lock);

 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
 	/*
 	 * Get init config from Timer Counter registers if
 	 * Timer Counter is already configured as a PWM generator.
 	 */
 	if (cmr & ATMEL_TC_WAVE) {
 		if (pwm->hwpwm == 0)
 			regmap_read(tcbpwmc->regmap,
 				    ATMEL_TC_REG(tcbpwmc->channel, RA),
 				    &tcbpwm->duty);
 		else
 			regmap_read(tcbpwmc->regmap,
 				    ATMEL_TC_REG(tcbpwmc->channel, RB),
 				    &tcbpwm->duty);

 		tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
 		regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
 			    &tcbpwm->period);
 		cmr &= (ATMEL_TC_TCCLKS | ATMEL_TC_ACMR_MASK |
 			ATMEL_TC_BCMR_MASK);
 	} else
 		cmr = 0;

 	cmr |= ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO | ATMEL_TC_EEVT_XC0;
 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);

 	return 0;
 }

 static void atmel_tcb_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);

 	clk_disable_unprepare(tcbpwmc->clk);
 }

 static void atmel_tcb_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
 				  enum pwm_polarity polarity)
 {
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
 	unsigned cmr;

 	/*
 	 * If duty is 0 the timer will be stopped and we have to
 	 * configure the output correctly on software trigger:
 	 *  - set output to high if PWM_POLARITY_INVERSED
 	 *  - set output to low if PWM_POLARITY_NORMAL
 	 *
 	 * This is why we're reverting polarity in this case.
 	 */
 	if (tcbpwm->duty == 0)
 		polarity = !polarity;

 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);

 	/* flush old setting and set the new one */
 	if (pwm->hwpwm == 0) {
 		cmr &= ~ATMEL_TC_ACMR_MASK;
 		if (polarity == PWM_POLARITY_INVERSED)
 			cmr |= ATMEL_TC_ASWTRG_CLEAR;
 		else
 			cmr |= ATMEL_TC_ASWTRG_SET;
 	} else {
 		cmr &= ~ATMEL_TC_BCMR_MASK;
 		if (polarity == PWM_POLARITY_INVERSED)
 			cmr |= ATMEL_TC_BSWTRG_CLEAR;
 		else
 			cmr |= ATMEL_TC_BSWTRG_SET;
 	}

 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);

 	/*
 	 * Use software trigger to apply the new setting.
 	 * If both PWM devices in this group are disabled we stop the clock.
 	 */
 	if (!(cmr & (ATMEL_TC_ACPC | ATMEL_TC_BCPC))) {
 		regmap_write(tcbpwmc->regmap,
 			     ATMEL_TC_REG(tcbpwmc->channel, CCR),
 			     ATMEL_TC_SWTRG | ATMEL_TC_CLKDIS);
 		tcbpwmc->bkup.enabled = 1;
 	} else {
 		regmap_write(tcbpwmc->regmap,
 			     ATMEL_TC_REG(tcbpwmc->channel, CCR),
 			     ATMEL_TC_SWTRG);
 		tcbpwmc->bkup.enabled = 0;
 	}
 }

 static int atmel_tcb_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm,
 				enum pwm_polarity polarity)
 {
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
 	u32 cmr;

 	/*
 	 * If duty is 0 the timer will be stopped and we have to
 	 * configure the output correctly on software trigger:
 	 *  - set output to high if PWM_POLARITY_INVERSED
 	 *  - set output to low if PWM_POLARITY_NORMAL
 	 *
 	 * This is why we're reverting polarity in this case.
 	 */
 	if (tcbpwm->duty == 0)
 		polarity = !polarity;

 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);

 	/* flush old setting and set the new one */
 	cmr &= ~ATMEL_TC_TCCLKS;

 	if (pwm->hwpwm == 0) {
 		cmr &= ~ATMEL_TC_ACMR_MASK;

 		/* Set CMR flags according to given polarity */
 		if (polarity == PWM_POLARITY_INVERSED)
 			cmr |= ATMEL_TC_ASWTRG_CLEAR;
 		else
 			cmr |= ATMEL_TC_ASWTRG_SET;
 	} else {
 		cmr &= ~ATMEL_TC_BCMR_MASK;
 		if (polarity == PWM_POLARITY_INVERSED)
 			cmr |= ATMEL_TC_BSWTRG_CLEAR;
 		else
 			cmr |= ATMEL_TC_BSWTRG_SET;
 	}

 	/*
 	 * If duty is 0 or equal to period there's no need to register
 	 * a specific action on RA/RB and RC compare.
 	 * The output will be configured on software trigger and keep
 	 * this config till next config call.
 	 */
 	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
 		if (pwm->hwpwm == 0) {
 			if (polarity == PWM_POLARITY_INVERSED)
 				cmr |= ATMEL_TC_ACPA_SET | ATMEL_TC_ACPC_CLEAR;
 			else
 				cmr |= ATMEL_TC_ACPA_CLEAR | ATMEL_TC_ACPC_SET;
 		} else {
 			if (polarity == PWM_POLARITY_INVERSED)
 				cmr |= ATMEL_TC_BCPB_SET | ATMEL_TC_BCPC_CLEAR;
 			else
 				cmr |= ATMEL_TC_BCPB_CLEAR | ATMEL_TC_BCPC_SET;
 		}
 	}

 	cmr |= (tcbpwm->div & ATMEL_TC_TCCLKS);

 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);

 	if (pwm->hwpwm == 0)
 		regmap_write(tcbpwmc->regmap,
 			     ATMEL_TC_REG(tcbpwmc->channel, RA),
 			     tcbpwm->duty);
 	else
 		regmap_write(tcbpwmc->regmap,
 			     ATMEL_TC_REG(tcbpwmc->channel, RB),
 			     tcbpwm->duty);

 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
 		     tcbpwm->period);

 	/* Use software trigger to apply the new setting */
 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
 		     ATMEL_TC_SWTRG | ATMEL_TC_CLKEN);
 	tcbpwmc->bkup.enabled = 1;
 	return 0;
 }

 static int atmel_tcb_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 				int duty_ns, int period_ns)
 {
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
 	/* companion PWM sharing register values period and div */
 	struct atmel_tcb_pwm_device *atcbpwm = &tcbpwmc->pwms[pwm->hwpwm ^ 1];
 	int i = 0;
 	int slowclk = 0;
 	unsigned period;
 	unsigned duty;
 	unsigned rate = clk_get_rate(tcbpwmc->clk);
 	unsigned long long min;
 	unsigned long long max;

 	/*
 	 * Find best clk divisor:
 	 * the smallest divisor which can fulfill the period_ns requirements.
 	 * If there is a gclk, the first divisor is actually the gclk selector
 	 */
 	if (tcbpwmc->gclk)
 		i = 1;
 	for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
 		if (atmel_tcb_divisors[i] == 0) {
 			slowclk = i;
 			continue;
 		}
 		min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
 		max = min << tcbpwmc->width;
 		if (max >= period_ns)
 			break;
 	}

 	/*
 	 * If none of the divisor are small enough to represent period_ns
 	 * take slow clock (32KHz).
 	 */
 	if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
 		i = slowclk;
 		rate = clk_get_rate(tcbpwmc->slow_clk);
 		min = div_u64(NSEC_PER_SEC, rate);
 		max = min << tcbpwmc->width;

 		/* If period is too big return ERANGE error */
 		if (max < period_ns)
 			return -ERANGE;
 	}

 	duty = div_u64(duty_ns, min);
 	period = div_u64(period_ns, min);

 	/*
 	 * PWM devices provided by the TCB driver are grouped by 2.
 	 * PWM devices in a given group must be configured with the
 	 * same period_ns.
 	 *
 	 * We're checking the period value of the second PWM device
 	 * in this group before applying the new config.
 	 */
 	if ((atcbpwm->duty > 0 && atcbpwm->duty != atcbpwm->period) &&
 		(atcbpwm->div != i || atcbpwm->period != period)) {
 		dev_err(pwmchip_parent(chip),
 			"failed to configure period_ns: PWM group already configured with a different value\n");
 		return -EINVAL;
 	}

 	tcbpwm->period = period;
 	tcbpwm->div = i;
 	tcbpwm->duty = duty;

 	return 0;
 }

 static int atmel_tcb_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			       const struct pwm_state *state)
 {
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	int duty_cycle, period;
 	int ret;

 	guard(spinlock)(&tcbpwmc->lock);

 	if (!state->enabled) {
 		atmel_tcb_pwm_disable(chip, pwm, state->polarity);
 		return 0;
 	}

 	period = state->period < INT_MAX ? state->period : INT_MAX;
 	duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX;

 	ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
 	if (ret)
 		return ret;

 	return atmel_tcb_pwm_enable(chip, pwm, state->polarity);
 }

 static const struct pwm_ops atmel_tcb_pwm_ops = {
 	.request = atmel_tcb_pwm_request,
 	.free = atmel_tcb_pwm_free,
 	.apply = atmel_tcb_pwm_apply,
 };

 static struct atmel_tcb_config tcb_rm9200_config = {
 	.counter_width = 16,
 };

 static struct atmel_tcb_config tcb_sam9x5_config = {
 	.counter_width = 32,
 };

 static struct atmel_tcb_config tcb_sama5d2_config = {
 	.counter_width = 32,
 	.has_gclk = 1,
 };

 static const struct of_device_id atmel_tcb_of_match[] = {
 	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
 	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
 	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
 	{ /* sentinel */ }
 };

 static int atmel_tcb_pwm_probe(struct platform_device *pdev)
 {
 	struct pwm_chip *chip;
 	const struct of_device_id *match;
 	struct atmel_tcb_pwm_chip *tcbpwmc;
 	const struct atmel_tcb_config *config;
 	struct device_node *np = pdev->dev.of_node;
 	char clk_name[] = "t0_clk";
 	int err;
 	int channel;

 	chip = devm_pwmchip_alloc(&pdev->dev, NPWM, sizeof(*tcbpwmc));
 	if (IS_ERR(chip))
 		return PTR_ERR(chip);
 	tcbpwmc = to_tcb_chip(chip);

 	err = of_property_read_u32(np, "reg", &channel);
 	if (err < 0) {
 		dev_err(&pdev->dev,
 			"failed to get Timer Counter Block channel from device tree (error: %d)\n",
 			err);
 		return err;
 	}

 	tcbpwmc->regmap = syscon_node_to_regmap(np->parent);
 	if (IS_ERR(tcbpwmc->regmap))
 		return PTR_ERR(tcbpwmc->regmap);

 	tcbpwmc->slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
 	if (IS_ERR(tcbpwmc->slow_clk))
 		return PTR_ERR(tcbpwmc->slow_clk);

 	clk_name[1] += channel;
 	tcbpwmc->clk = of_clk_get_by_name(np->parent, clk_name);
 	if (IS_ERR(tcbpwmc->clk))
 		tcbpwmc->clk = of_clk_get_by_name(np->parent, "t0_clk");
 	if (IS_ERR(tcbpwmc->clk)) {
 		err = PTR_ERR(tcbpwmc->clk);
 		goto err_slow_clk;
 	}

 	match = of_match_node(atmel_tcb_of_match, np->parent);
 	config = match->data;

 	if (config->has_gclk) {
 		tcbpwmc->gclk = of_clk_get_by_name(np->parent, "gclk");
 		if (IS_ERR(tcbpwmc->gclk)) {
 			err = PTR_ERR(tcbpwmc->gclk);
 			goto err_clk;
 		}
 	}

 	chip->ops = &atmel_tcb_pwm_ops;
 	tcbpwmc->channel = channel;
 	tcbpwmc->width = config->counter_width;

 	err = clk_prepare_enable(tcbpwmc->slow_clk);
 	if (err)
 		goto err_gclk;

 	spin_lock_init(&tcbpwmc->lock);

 	err = pwmchip_add(chip);
 	if (err < 0)
 		goto err_disable_clk;

 	platform_set_drvdata(pdev, chip);

 	return 0;

 err_disable_clk:
 	clk_disable_unprepare(tcbpwmc->slow_clk);

 err_gclk:
 	clk_put(tcbpwmc->gclk);

 err_clk:
 	clk_put(tcbpwmc->clk);

 err_slow_clk:
 	clk_put(tcbpwmc->slow_clk);

 	return err;
 }

 static void atmel_tcb_pwm_remove(struct platform_device *pdev)
 {
 	struct pwm_chip *chip = platform_get_drvdata(pdev);
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);

 	pwmchip_remove(chip);

 	clk_disable_unprepare(tcbpwmc->slow_clk);
 	clk_put(tcbpwmc->gclk);
 	clk_put(tcbpwmc->clk);
 	clk_put(tcbpwmc->slow_clk);
 }

 static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
 	{ .compatible = "atmel,tcb-pwm", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);

 static int atmel_tcb_pwm_suspend(struct device *dev)
 {
 	struct pwm_chip *chip = dev_get_drvdata(dev);
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	struct atmel_tcb_channel *chan = &tcbpwmc->bkup;
 	unsigned int channel = tcbpwmc->channel;

 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
 	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);

 	return 0;
 }

 static int atmel_tcb_pwm_resume(struct device *dev)
 {
 	struct pwm_chip *chip = dev_get_drvdata(dev);
 	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
 	struct atmel_tcb_channel *chan = &tcbpwmc->bkup;
 	unsigned int channel = tcbpwmc->channel;

 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
 	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RC), chan->rc);

 	if (chan->enabled)
 		regmap_write(tcbpwmc->regmap,
 			     ATMEL_TC_CLKEN | ATMEL_TC_SWTRG,
 			     ATMEL_TC_REG(channel, CCR));

 	return 0;
 }

 static DEFINE_SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
 				atmel_tcb_pwm_resume);

 static struct platform_driver atmel_tcb_pwm_driver = {
 	.driver = {
 		.name = "atmel-tcb-pwm",
 		.of_match_table = atmel_tcb_pwm_dt_ids,
 		.pm = pm_ptr(&atmel_tcb_pwm_pm_ops),
 	},
 	.probe = atmel_tcb_pwm_probe,
 	.remove = atmel_tcb_pwm_remove,
 };
 module_platform_driver(atmel_tcb_pwm_driver);

 MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
 MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Copyright (C) Overkiz SAS 2012
	*
	* Author: Boris BREZILLON <b.brezillon@overkiz.com>
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/clocksource.h>
	#include <linux/clockchips.h>
	#include <linux/interrupt.h>
	#include <linux/irq.h>

	#include <linux/clk.h>
	#include <linux/err.h>
	#include <linux/ioport.h>
	#include <linux/io.h>
	#include <linux/mfd/syscon.h>
	#include <linux/platform_device.h>
	#include <linux/pwm.h>
	#include <linux/of.h>
	#include <linux/regmap.h>
	#include <linux/slab.h>
	#include <soc/at91/atmel_tcb.h>

	#define NPWM 2

	#define ATMEL_TC_ACMR_MASK (ATMEL_TC_ACPA \| ATMEL_TC_ACPC \| \
	ATMEL_TC_AEEVT \| ATMEL_TC_ASWTRG)

	#define ATMEL_TC_BCMR_MASK (ATMEL_TC_BCPB \| ATMEL_TC_BCPC \| \
	ATMEL_TC_BEEVT \| ATMEL_TC_BSWTRG)

	struct atmel_tcb_pwm_device {
	unsigned div; /* PWM clock divider */
	unsigned duty; /* PWM duty expressed in clk cycles */
	unsigned period; /* PWM period expressed in clk cycles */
	};

	struct atmel_tcb_channel {
	u32 enabled;
	u32 cmr;
	u32 ra;
	u32 rb;
	u32 rc;
	};

	struct atmel_tcb_pwm_chip {
	spinlock_t lock;
	u8 channel;
	u8 width;
	struct regmap *regmap;
	struct clk *clk;
	struct clk *gclk;
	struct clk *slow_clk;
	struct atmel_tcb_pwm_device pwms[NPWM];
	struct atmel_tcb_channel bkup;
	};

	static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128, 0, };

	static inline struct atmel_tcb_pwm_chip to_tcb_chip(struct pwm_chip chip)
	{
	return pwmchip_get_drvdata(chip);
	}

	static int atmel_tcb_pwm_request(struct pwm_chip *chip,
	struct pwm_device *pwm)
	{
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
	unsigned cmr;
	int ret;

	ret = clk_prepare_enable(tcbpwmc->clk);
	if (ret)
	return ret;

	tcbpwm->duty = 0;
	tcbpwm->period = 0;
	tcbpwm->div = 0;

	guard(spinlock)(&tcbpwmc->lock);

	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);
	/*
	* Get init config from Timer Counter registers if
	* Timer Counter is already configured as a PWM generator.
	*/
	if (cmr & ATMEL_TC_WAVE) {
	if (pwm->hwpwm == 0)
	regmap_read(tcbpwmc->regmap,
	ATMEL_TC_REG(tcbpwmc->channel, RA),
	&tcbpwm->duty);
	else
	regmap_read(tcbpwmc->regmap,
	ATMEL_TC_REG(tcbpwmc->channel, RB),
	&tcbpwm->duty);

	tcbpwm->div = cmr & ATMEL_TC_TCCLKS;
	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
	&tcbpwm->period);
	cmr &= (ATMEL_TC_TCCLKS \| ATMEL_TC_ACMR_MASK \|
	ATMEL_TC_BCMR_MASK);
	} else
	cmr = 0;

	cmr \|= ATMEL_TC_WAVE \| ATMEL_TC_WAVESEL_UP_AUTO \| ATMEL_TC_EEVT_XC0;
	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);

	return 0;
	}

	static void atmel_tcb_pwm_free(struct pwm_chip chip, struct pwm_device pwm)
	{
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);

	clk_disable_unprepare(tcbpwmc->clk);
	}

	static void atmel_tcb_pwm_disable(struct pwm_chip chip, struct pwm_device pwm,
	enum pwm_polarity polarity)
	{
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
	unsigned cmr;

	/*
	* If duty is 0 the timer will be stopped and we have to
	* configure the output correctly on software trigger:
	* - set output to high if PWM_POLARITY_INVERSED
	* - set output to low if PWM_POLARITY_NORMAL
	*
	* This is why we're reverting polarity in this case.
	*/
	if (tcbpwm->duty == 0)
	polarity = !polarity;

	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);

	/* flush old setting and set the new one */
	if (pwm->hwpwm == 0) {
	cmr &= ~ATMEL_TC_ACMR_MASK;
	if (polarity == PWM_POLARITY_INVERSED)
	cmr \|= ATMEL_TC_ASWTRG_CLEAR;
	else
	cmr \|= ATMEL_TC_ASWTRG_SET;
	} else {
	cmr &= ~ATMEL_TC_BCMR_MASK;
	if (polarity == PWM_POLARITY_INVERSED)
	cmr \|= ATMEL_TC_BSWTRG_CLEAR;
	else
	cmr \|= ATMEL_TC_BSWTRG_SET;
	}

	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);

	/*
	* Use software trigger to apply the new setting.
	* If both PWM devices in this group are disabled we stop the clock.
	*/
	if (!(cmr & (ATMEL_TC_ACPC \| ATMEL_TC_BCPC))) {
	regmap_write(tcbpwmc->regmap,
	ATMEL_TC_REG(tcbpwmc->channel, CCR),
	ATMEL_TC_SWTRG \| ATMEL_TC_CLKDIS);
	tcbpwmc->bkup.enabled = 1;
	} else {
	regmap_write(tcbpwmc->regmap,
	ATMEL_TC_REG(tcbpwmc->channel, CCR),
	ATMEL_TC_SWTRG);
	tcbpwmc->bkup.enabled = 0;
	}
	}

	static int atmel_tcb_pwm_enable(struct pwm_chip chip, struct pwm_device pwm,
	enum pwm_polarity polarity)
	{
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
	u32 cmr;

	/*
	* If duty is 0 the timer will be stopped and we have to
	* configure the output correctly on software trigger:
	* - set output to high if PWM_POLARITY_INVERSED
	* - set output to low if PWM_POLARITY_NORMAL
	*
	* This is why we're reverting polarity in this case.
	*/
	if (tcbpwm->duty == 0)
	polarity = !polarity;

	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), &cmr);

	/* flush old setting and set the new one */
	cmr &= ~ATMEL_TC_TCCLKS;

	if (pwm->hwpwm == 0) {
	cmr &= ~ATMEL_TC_ACMR_MASK;

	/* Set CMR flags according to given polarity */
	if (polarity == PWM_POLARITY_INVERSED)
	cmr \|= ATMEL_TC_ASWTRG_CLEAR;
	else
	cmr \|= ATMEL_TC_ASWTRG_SET;
	} else {
	cmr &= ~ATMEL_TC_BCMR_MASK;
	if (polarity == PWM_POLARITY_INVERSED)
	cmr \|= ATMEL_TC_BSWTRG_CLEAR;
	else
	cmr \|= ATMEL_TC_BSWTRG_SET;
	}

	/*
	* If duty is 0 or equal to period there's no need to register
	* a specific action on RA/RB and RC compare.
	* The output will be configured on software trigger and keep
	* this config till next config call.
	*/
	if (tcbpwm->duty != tcbpwm->period && tcbpwm->duty > 0) {
	if (pwm->hwpwm == 0) {
	if (polarity == PWM_POLARITY_INVERSED)
	cmr \|= ATMEL_TC_ACPA_SET \| ATMEL_TC_ACPC_CLEAR;
	else
	cmr \|= ATMEL_TC_ACPA_CLEAR \| ATMEL_TC_ACPC_SET;
	} else {
	if (polarity == PWM_POLARITY_INVERSED)
	cmr \|= ATMEL_TC_BCPB_SET \| ATMEL_TC_BCPC_CLEAR;
	else
	cmr \|= ATMEL_TC_BCPB_CLEAR \| ATMEL_TC_BCPC_SET;
	}
	}

	cmr \|= (tcbpwm->div & ATMEL_TC_TCCLKS);

	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CMR), cmr);

	if (pwm->hwpwm == 0)
	regmap_write(tcbpwmc->regmap,
	ATMEL_TC_REG(tcbpwmc->channel, RA),
	tcbpwm->duty);
	else
	regmap_write(tcbpwmc->regmap,
	ATMEL_TC_REG(tcbpwmc->channel, RB),
	tcbpwm->duty);

	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, RC),
	tcbpwm->period);

	/* Use software trigger to apply the new setting */
	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(tcbpwmc->channel, CCR),
	ATMEL_TC_SWTRG \| ATMEL_TC_CLKEN);
	tcbpwmc->bkup.enabled = 1;
	return 0;
	}

	static int atmel_tcb_pwm_config(struct pwm_chip chip, struct pwm_device pwm,
	int duty_ns, int period_ns)
	{
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	struct atmel_tcb_pwm_device *tcbpwm = &tcbpwmc->pwms[pwm->hwpwm];
	/* companion PWM sharing register values period and div */
	struct atmel_tcb_pwm_device *atcbpwm = &tcbpwmc->pwms[pwm->hwpwm ^ 1];
	int i = 0;
	int slowclk = 0;
	unsigned period;
	unsigned duty;
	unsigned rate = clk_get_rate(tcbpwmc->clk);
	unsigned long long min;
	unsigned long long max;

	/*
	* Find best clk divisor:
	* the smallest divisor which can fulfill the period_ns requirements.
	* If there is a gclk, the first divisor is actually the gclk selector
	*/
	if (tcbpwmc->gclk)
	i = 1;
	for (; i < ARRAY_SIZE(atmel_tcb_divisors); ++i) {
	if (atmel_tcb_divisors[i] == 0) {
	slowclk = i;
	continue;
	}
	min = div_u64((u64)NSEC_PER_SEC * atmel_tcb_divisors[i], rate);
	max = min << tcbpwmc->width;
	if (max >= period_ns)
	break;
	}

	/*
	* If none of the divisor are small enough to represent period_ns
	* take slow clock (32KHz).
	*/
	if (i == ARRAY_SIZE(atmel_tcb_divisors)) {
	i = slowclk;
	rate = clk_get_rate(tcbpwmc->slow_clk);
	min = div_u64(NSEC_PER_SEC, rate);
	max = min << tcbpwmc->width;

	/* If period is too big return ERANGE error */
	if (max < period_ns)
	return -ERANGE;
	}

	duty = div_u64(duty_ns, min);
	period = div_u64(period_ns, min);

	/*
	* PWM devices provided by the TCB driver are grouped by 2.
	* PWM devices in a given group must be configured with the
	* same period_ns.
	*
	* We're checking the period value of the second PWM device
	* in this group before applying the new config.
	*/
	if ((atcbpwm->duty > 0 && atcbpwm->duty != atcbpwm->period) &&
	(atcbpwm->div != i \|\| atcbpwm->period != period)) {
	dev_err(pwmchip_parent(chip),
	"failed to configure period_ns: PWM group already configured with a different value\n");
	return -EINVAL;
	}

	tcbpwm->period = period;
	tcbpwm->div = i;
	tcbpwm->duty = duty;

	return 0;
	}

	static int atmel_tcb_pwm_apply(struct pwm_chip chip, struct pwm_device pwm,
	const struct pwm_state *state)
	{
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	int duty_cycle, period;
	int ret;

	guard(spinlock)(&tcbpwmc->lock);

	if (!state->enabled) {
	atmel_tcb_pwm_disable(chip, pwm, state->polarity);
	return 0;
	}

	period = state->period < INT_MAX ? state->period : INT_MAX;
	duty_cycle = state->duty_cycle < INT_MAX ? state->duty_cycle : INT_MAX;

	ret = atmel_tcb_pwm_config(chip, pwm, duty_cycle, period);
	if (ret)
	return ret;

	return atmel_tcb_pwm_enable(chip, pwm, state->polarity);
	}

	static const struct pwm_ops atmel_tcb_pwm_ops = {
	.request = atmel_tcb_pwm_request,
	.free = atmel_tcb_pwm_free,
	.apply = atmel_tcb_pwm_apply,
	};

	static struct atmel_tcb_config tcb_rm9200_config = {
	.counter_width = 16,
	};

	static struct atmel_tcb_config tcb_sam9x5_config = {
	.counter_width = 32,
	};

	static struct atmel_tcb_config tcb_sama5d2_config = {
	.counter_width = 32,
	.has_gclk = 1,
	};

	static const struct of_device_id atmel_tcb_of_match[] = {
	{ .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, },
	{ .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, },
	{ .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, },
	{ /* sentinel */ }
	};

	static int atmel_tcb_pwm_probe(struct platform_device *pdev)
	{
	struct pwm_chip *chip;
	const struct of_device_id *match;
	struct atmel_tcb_pwm_chip *tcbpwmc;
	const struct atmel_tcb_config *config;
	struct device_node *np = pdev->dev.of_node;
	char clk_name[] = "t0_clk";
	int err;
	int channel;

	chip = devm_pwmchip_alloc(&pdev->dev, NPWM, sizeof(*tcbpwmc));
	if (IS_ERR(chip))
	return PTR_ERR(chip);
	tcbpwmc = to_tcb_chip(chip);

	err = of_property_read_u32(np, "reg", &channel);
	if (err < 0) {
	dev_err(&pdev->dev,
	"failed to get Timer Counter Block channel from device tree (error: %d)\n",
	err);
	return err;
	}

	tcbpwmc->regmap = syscon_node_to_regmap(np->parent);
	if (IS_ERR(tcbpwmc->regmap))
	return PTR_ERR(tcbpwmc->regmap);

	tcbpwmc->slow_clk = of_clk_get_by_name(np->parent, "slow_clk");
	if (IS_ERR(tcbpwmc->slow_clk))
	return PTR_ERR(tcbpwmc->slow_clk);

	clk_name[1] += channel;
	tcbpwmc->clk = of_clk_get_by_name(np->parent, clk_name);
	if (IS_ERR(tcbpwmc->clk))
	tcbpwmc->clk = of_clk_get_by_name(np->parent, "t0_clk");
	if (IS_ERR(tcbpwmc->clk)) {
	err = PTR_ERR(tcbpwmc->clk);
	goto err_slow_clk;
	}

	match = of_match_node(atmel_tcb_of_match, np->parent);
	config = match->data;

	if (config->has_gclk) {
	tcbpwmc->gclk = of_clk_get_by_name(np->parent, "gclk");
	if (IS_ERR(tcbpwmc->gclk)) {
	err = PTR_ERR(tcbpwmc->gclk);
	goto err_clk;
	}
	}

	chip->ops = &atmel_tcb_pwm_ops;
	tcbpwmc->channel = channel;
	tcbpwmc->width = config->counter_width;

	err = clk_prepare_enable(tcbpwmc->slow_clk);
	if (err)
	goto err_gclk;

	spin_lock_init(&tcbpwmc->lock);

	err = pwmchip_add(chip);
	if (err < 0)
	goto err_disable_clk;

	platform_set_drvdata(pdev, chip);

	return 0;

	err_disable_clk:
	clk_disable_unprepare(tcbpwmc->slow_clk);

	err_gclk:
	clk_put(tcbpwmc->gclk);

	err_clk:
	clk_put(tcbpwmc->clk);

	err_slow_clk:
	clk_put(tcbpwmc->slow_clk);

	return err;
	}

	static void atmel_tcb_pwm_remove(struct platform_device *pdev)
	{
	struct pwm_chip *chip = platform_get_drvdata(pdev);
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);

	pwmchip_remove(chip);

	clk_disable_unprepare(tcbpwmc->slow_clk);
	clk_put(tcbpwmc->gclk);
	clk_put(tcbpwmc->clk);
	clk_put(tcbpwmc->slow_clk);
	}

	static const struct of_device_id atmel_tcb_pwm_dt_ids[] = {
	{ .compatible = "atmel,tcb-pwm", },
	{ /* sentinel */ }
	};
	MODULE_DEVICE_TABLE(of, atmel_tcb_pwm_dt_ids);

	static int atmel_tcb_pwm_suspend(struct device *dev)
	{
	struct pwm_chip *chip = dev_get_drvdata(dev);
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	struct atmel_tcb_channel *chan = &tcbpwmc->bkup;
	unsigned int channel = tcbpwmc->channel;

	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, CMR), &chan->cmr);
	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RA), &chan->ra);
	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RB), &chan->rb);
	regmap_read(tcbpwmc->regmap, ATMEL_TC_REG(channel, RC), &chan->rc);

	return 0;
	}

	static int atmel_tcb_pwm_resume(struct device *dev)
	{
	struct pwm_chip *chip = dev_get_drvdata(dev);
	struct atmel_tcb_pwm_chip *tcbpwmc = to_tcb_chip(chip);
	struct atmel_tcb_channel *chan = &tcbpwmc->bkup;
	unsigned int channel = tcbpwmc->channel;

	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, CMR), chan->cmr);
	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RA), chan->ra);
	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RB), chan->rb);
	regmap_write(tcbpwmc->regmap, ATMEL_TC_REG(channel, RC), chan->rc);

	if (chan->enabled)
	regmap_write(tcbpwmc->regmap,
	ATMEL_TC_CLKEN \| ATMEL_TC_SWTRG,
	ATMEL_TC_REG(channel, CCR));

	return 0;
	}

	static DEFINE_SIMPLE_DEV_PM_OPS(atmel_tcb_pwm_pm_ops, atmel_tcb_pwm_suspend,
	atmel_tcb_pwm_resume);

	static struct platform_driver atmel_tcb_pwm_driver = {
	.driver = {
	.name = "atmel-tcb-pwm",
	.of_match_table = atmel_tcb_pwm_dt_ids,
	.pm = pm_ptr(&atmel_tcb_pwm_pm_ops),
	},
	.probe = atmel_tcb_pwm_probe,
	.remove = atmel_tcb_pwm_remove,
	};
	module_platform_driver(atmel_tcb_pwm_driver);

	MODULE_AUTHOR("Boris BREZILLON <b.brezillon@overkiz.com>");
	MODULE_DESCRIPTION("Atmel Timer Counter Pulse Width Modulation Driver");
	MODULE_LICENSE("GPL v2");