| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: nuvoton NPCM7XX I2C Controller Device Tree Bindings |
| |
| description: | |
| The NPCM750x includes sixteen I2C bus controllers. All Controllers support |
| both master and slave mode. Each controller can switch between master and slave |
| at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and |
| RX. |
| |
| maintainers: |
| - Tali Perry <tali.perry1@gmail.com> |
| |
| properties: |
| compatible: |
| const: nuvoton,npcm7xx-i2c |
| |
| reg: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| description: Reference clock for the I2C bus |
| |
| clock-frequency: |
| description: Desired I2C bus clock frequency in Hz. If not specified, |
| the default 100 kHz frequency will be used. |
| possible values are 100000, 400000 and 1000000. |
| default: 100000 |
| enum: [100000, 400000, 1000000] |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| |
| allOf: |
| - $ref: /schemas/i2c/i2c-controller.yaml# |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/nuvoton,npcm7xx-clock.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| i2c0: i2c@80000 { |
| reg = <0x80000 0x1000>; |
| clocks = <&clk NPCM7XX_CLK_APB2>; |
| clock-frequency = <100000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| compatible = "nuvoton,npcm750-i2c"; |
| }; |
| |
| ... |
