| * Freescale mpc8xxx watchdog driver (For 83xx, 86xx and 8xx) |
| |
| Required properties: |
| - compatible: Shall contain one of the following: |
| "mpc83xx_wdt" for an mpc83xx |
| "fsl,mpc8610-wdt" for an mpc86xx |
| "fsl,mpc823-wdt" for an mpc8xx |
| - reg: base physical address and length of the area hosting the |
| watchdog registers. |
| On the 83xx, "Watchdog Timer Registers" area: <0x200 0x100> |
| On the 86xx, "Watchdog Timer Registers" area: <0xe4000 0x100> |
| On the 8xx, "General System Interface Unit" area: <0x0 0x10> |
| |
| Optional properties: |
| - reg: additional physical address and length (4) of location of the |
| Reset Status Register (called RSTRSCR on the mpc86xx) |
| On the 83xx, it is located at offset 0x910 |
| On the 86xx, it is located at offset 0xe0094 |
| On the 8xx, it is located at offset 0x288 |
| |
| Example: |
| WDT: watchdog@0 { |
| compatible = "fsl,mpc823-wdt"; |
| reg = <0x0 0x10 0x288 0x4>; |
| }; |
