.. SPDX-License-Identifier: GPL-2.0

==========================
KSMBD - SMB3 Kernel Server
==========================

KSMBD is a linux kernel server which implements SMB3 protocol in kernel space
for sharing files over network.

KSMBD architecture
==================

The subset of performance related operations belong in kernelspace and
the other subset which belong to operations which are not really related with
performance in userspace. So, DCE/RPC management that has historically resulted
into number of buffer overflow issues and dangerous security bugs and user
account management are implemented in user space as ksmbd.mountd.
File operations that are related with performance (open/read/write/close etc.)
in kernel space (ksmbd). This also allows for easier integration with VFS
interface for all file operations.

ksmbd (kernel daemon)
---------------------

When the server daemon is started, It starts up a forker thread
(ksmbd/interface name) at initialization time and open a dedicated port 445
for listening to SMB requests. Whenever new clients make request, Forker
thread will accept the client connection and fork a new thread for dedicated
communication channel between the client and the server. It allows for parallel
processing of SMB requests(commands) from clients as well as allowing for new
clients to make new connections. Each instance is named ksmbd/1~n(port number)
to indicate connected clients. Depending on the SMB request types, each new
thread can decide to pass through the commands to the user space (ksmbd.mountd),
currently DCE/RPC commands are identified to be handled through the user space.
To further utilize the linux kernel, it has been chosen to process the commands
as workitems and to be executed in the handlers of the ksmbd-io kworker threads.
It allows for multiplexing of the handlers as the kernel take care of initiating
extra worker threads if the load is increased and vice versa, if the load is
decreased it destroys the extra worker threads. So, after connection is
established with client. Dedicated ksmbd/1..n(port number) takes complete
ownership of receiving/parsing of SMB commands. Each received command is worked
in parallel i.e., There can be multiple clients commands which are worked in
parallel. After receiving each command a separated kernel workitem is prepared
for each command which is further queued to be handled by ksmbd-io kworkers.
So, each SMB workitem is queued to the kworkers. This allows the benefit of load
sharing to be managed optimally by the default kernel and optimizing client
performance by handling client commands in parallel.

ksmbd.mountd (user space daemon)
--------------------------------

ksmbd.mountd is userspace process to, transfer user account and password that
are registered using ksmbd.adduser (part of utils for user space). Further it
allows sharing information parameters that parsed from smb.conf to ksmbd in
kernel. For the execution part it has a daemon which is continuously running
and connected to the kernel interface using netlink socket, it waits for the
requests (dcerpc and share/user info). It handles RPC calls (at a minimum few
dozen) that are most important for file server from NetShareEnum and
NetServerGetInfo. Complete DCE/RPC response is prepared from the user space
and passed over to the associated kernel thread for the client.


KSMBD Feature Status
====================

============================== =================================================
Feature name                   Status
============================== =================================================
Dialects                       Supported. SMB2.1 SMB3.0, SMB3.1.1 dialects
                               (intentionally excludes security vulnerable SMB1
                               dialect).
Auto Negotiation               Supported.
Compound Request               Supported.
Oplock Cache Mechanism         Supported.
SMB2 leases(v1 lease)          Supported.
Directory leases(v2 lease)     Supported.
Multi-credits                  Supported.
NTLM/NTLMv2                    Supported.
HMAC-SHA256 Signing            Supported.
Secure negotiate               Supported.
Signing Update                 Supported.
Pre-authentication integrity   Supported.
SMB3 encryption(CCM, GCM)      Supported. (CCM/GCM128 and CCM/GCM256 supported)
SMB direct(RDMA)               Supported.
SMB3 Multi-channel             Partially Supported. Planned to implement
                               replay/retry mechanisms for future.
Receive Side Scaling mode      Supported.
SMB3.1.1 POSIX extension       Supported.
ACLs                           Partially Supported. only DACLs available, SACLs
                               (auditing) is planned for the future. For
                               ownership (SIDs) ksmbd generates random subauth
                               values(then store it to disk) and use uid/gid
                               get from inode as RID for local domain SID.
                               The current acl implementation is limited to
                               standalone server, not a domain member.
                               Integration with Samba tools is being worked on
                               to allow future support for running as a domain
                               member.
Kerberos                       Supported.
Durable handle v1,v2           Planned for future.
Persistent handle              Planned for future.
SMB2 notify                    Planned for future.
Sparse file support            Supported.
DCE/RPC support                Partially Supported. a few calls(NetShareEnumAll,
                               NetServerGetInfo, SAMR, LSARPC) that are needed
                               for file server handled via netlink interface
                               from ksmbd.mountd. Additional integration with
                               Samba tools and libraries via upcall is being
                               investigated to allow support for additional
                               DCE/RPC management calls (and future support
                               for Witness protocol e.g.)
ksmbd/nfsd interoperability    Planned for future. The features that ksmbd
                               support are Leases, Notify, ACLs and Share modes.
SMB3.1.1 Compression           Planned for future.
SMB3.1.1 over QUIC             Planned for future.
Signing/Encryption over RDMA   Planned for future.
SMB3.1.1 GMAC signing support  Planned for future.
============================== =================================================


How to run
==========

1. Download ksmbd-tools(https://github.com/cifsd-team/ksmbd-tools/releases) and
   compile them.

   - Refer README(https://github.com/cifsd-team/ksmbd-tools/blob/master/README.md)
     to know how to use ksmbd.mountd/adduser/addshare/control utils

     $ ./autogen.sh
     $ ./configure --with-rundir=/run
     $ make && sudo make install

2. Create /usr/local/etc/ksmbd/ksmbd.conf file, add SMB share in ksmbd.conf file.

   - Refer ksmbd.conf.example in ksmbd-utils, See ksmbd.conf manpage
     for details to configure shares.

        $ man ksmbd.conf

3. Create user/password for SMB share.

   - See ksmbd.adduser manpage.

     $ man ksmbd.adduser
     $ sudo ksmbd.adduser -a <Enter USERNAME for SMB share access>

4. Insert ksmbd.ko module after build your kernel. No need to load module
   if ksmbd is built into the kernel.

   - Set ksmbd in menuconfig(e.g. $ make menuconfig)
       [*] Network File Systems  --->
           <M> SMB3 server support (EXPERIMENTAL)

	$ sudo modprobe ksmbd.ko

5. Start ksmbd user space daemon

	$ sudo ksmbd.mountd

6. Access share from Windows or Linux using SMB3 client (cifs.ko or smbclient of samba)

Shutdown KSMBD
==============

1. kill user and kernel space daemon
	# sudo ksmbd.control -s

How to turn debug print on
==========================

Each layer
/sys/class/ksmbd-control/debug

1. Enable all component prints
	# sudo ksmbd.control -d "all"

2. Enable one of components (smb, auth, vfs, oplock, ipc, conn, rdma)
	# sudo ksmbd.control -d "smb"

3. Show what prints are enabled.
	# cat /sys/class/ksmbd-control/debug
	  [smb] auth vfs oplock ipc conn [rdma]

4. Disable prints:
	If you try the selected component once more, It is disabled without brackets.