The Kernel Address Sanitizer (KASAN)
====================================

Overview
--------

Kernel Address Sanitizer (KASAN) is a dynamic memory safety error detector
designed to find out-of-bounds and use-after-free bugs.

KASAN has three modes:

1. Generic KASAN
2. Software Tag-Based KASAN
3. Hardware Tag-Based KASAN

Generic KASAN, enabled with CONFIG_KASAN_GENERIC, is the mode intended for
debugging, similar to userspace ASan. This mode is supported on many CPU
architectures, but it has significant performance and memory overheads.

Software Tag-Based KASAN or SW_TAGS KASAN, enabled with CONFIG_KASAN_SW_TAGS,
can be used for both debugging and dogfood testing, similar to userspace HWASan.
This mode is only supported for arm64, but its moderate memory overhead allows
using it for testing on memory-restricted devices with real workloads.

Hardware Tag-Based KASAN or HW_TAGS KASAN, enabled with CONFIG_KASAN_HW_TAGS,
is the mode intended to be used as an in-field memory bug detector or as a
security mitigation. This mode only works on arm64 CPUs that support MTE
(Memory Tagging Extension), but it has low memory and performance overheads and
thus can be used in production.

For details about the memory and performance impact of each KASAN mode, see the
descriptions of the corresponding Kconfig options.

The Generic and the Software Tag-Based modes are commonly referred to as the
software modes. The Software Tag-Based and the Hardware Tag-Based modes are
referred to as the tag-based modes.

Support
-------

Architectures
~~~~~~~~~~~~~

Generic KASAN is supported on x86_64, arm, arm64, powerpc, riscv, s390, and
xtensa, and the tag-based KASAN modes are supported only on arm64.

Compilers
~~~~~~~~~

Software KASAN modes use compile-time instrumentation to insert validity checks
before every memory access and thus require a compiler version that provides
support for that. The Hardware Tag-Based mode relies on hardware to perform
these checks but still requires a compiler version that supports the memory
tagging instructions.

Generic KASAN requires GCC version 8.3.0 or later
or any Clang version supported by the kernel.

Software Tag-Based KASAN requires GCC 11+
or any Clang version supported by the kernel.

Hardware Tag-Based KASAN requires GCC 10+ or Clang 12+.

Memory types
~~~~~~~~~~~~

Generic KASAN supports finding bugs in all of slab, page_alloc, vmap, vmalloc,
stack, and global memory.

Software Tag-Based KASAN supports slab, page_alloc, vmalloc, and stack memory.

Hardware Tag-Based KASAN supports slab, page_alloc, and non-executable vmalloc
memory.

For slab, both software KASAN modes support SLUB and SLAB allocators, while
Hardware Tag-Based KASAN only supports SLUB.

Usage
-----

To enable KASAN, configure the kernel with::

	  CONFIG_KASAN=y

and choose between ``CONFIG_KASAN_GENERIC`` (to enable Generic KASAN),
``CONFIG_KASAN_SW_TAGS`` (to enable Software Tag-Based KASAN), and
``CONFIG_KASAN_HW_TAGS`` (to enable Hardware Tag-Based KASAN).

For the software modes, also choose between ``CONFIG_KASAN_OUTLINE`` and
``CONFIG_KASAN_INLINE``. Outline and inline are compiler instrumentation types.
The former produces a smaller binary while the latter is up to 2 times faster.

To include alloc and free stack traces of affected slab objects into reports,
enable ``CONFIG_STACKTRACE``. To include alloc and free stack traces of affected
physical pages, enable ``CONFIG_PAGE_OWNER`` and boot with ``page_owner=on``.

Boot parameters
~~~~~~~~~~~~~~~

KASAN is affected by the generic ``panic_on_warn`` command line parameter.
When it is enabled, KASAN panics the kernel after printing a bug report.

By default, KASAN prints a bug report only for the first invalid memory access.
With ``kasan_multi_shot``, KASAN prints a report on every invalid access. This
effectively disables ``panic_on_warn`` for KASAN reports.

Alternatively, independent of ``panic_on_warn``, the ``kasan.fault=`` boot
parameter can be used to control panic and reporting behaviour:

- ``kasan.fault=report`` or ``=panic`` controls whether to only print a KASAN
  report or also panic the kernel (default: ``report``). The panic happens even
  if ``kasan_multi_shot`` is enabled.

Software and Hardware Tag-Based KASAN modes (see the section about various
modes below) support altering stack trace collection behavior:

- ``kasan.stacktrace=off`` or ``=on`` disables or enables alloc and free stack
  traces collection (default: ``on``).
- ``kasan.stack_ring_size=<number of entries>`` specifies the number of entries
  in the stack ring (default: ``32768``).

Hardware Tag-Based KASAN mode is intended for use in production as a security
mitigation. Therefore, it supports additional boot parameters that allow
disabling KASAN altogether or controlling its features:

- ``kasan=off`` or ``=on`` controls whether KASAN is enabled (default: ``on``).

- ``kasan.mode=sync``, ``=async`` or ``=asymm`` controls whether KASAN
  is configured in synchronous, asynchronous or asymmetric mode of
  execution (default: ``sync``).
  Synchronous mode: a bad access is detected immediately when a tag
  check fault occurs.
  Asynchronous mode: a bad access detection is delayed. When a tag check
  fault occurs, the information is stored in hardware (in the TFSR_EL1
  register for arm64). The kernel periodically checks the hardware and
  only reports tag faults during these checks.
  Asymmetric mode: a bad access is detected synchronously on reads and
  asynchronously on writes.

- ``kasan.vmalloc=off`` or ``=on`` disables or enables tagging of vmalloc
  allocations (default: ``on``).

- ``kasan.page_alloc.sample=<sampling interval>`` makes KASAN tag only every
  Nth page_alloc allocation with the order equal or greater than
  ``kasan.page_alloc.sample.order``, where N is the value of the ``sample``
  parameter (default: ``1``, or tag every such allocation).
  This parameter is intended to mitigate the performance overhead introduced
  by KASAN.
  Note that enabling this parameter makes Hardware Tag-Based KASAN skip checks
  of allocations chosen by sampling and thus miss bad accesses to these
  allocations. Use the default value for accurate bug detection.

- ``kasan.page_alloc.sample.order=<minimum page order>`` specifies the minimum
  order of allocations that are affected by sampling (default: ``3``).
  Only applies when ``kasan.page_alloc.sample`` is set to a value greater
  than ``1``.
  This parameter is intended to allow sampling only large page_alloc
  allocations, which is the biggest source of the performance overhead.

Error reports
~~~~~~~~~~~~~

A typical KASAN report looks like this::

    ==================================================================
    BUG: KASAN: slab-out-of-bounds in kmalloc_oob_right+0xa8/0xbc [test_kasan]
    Write of size 1 at addr ffff8801f44ec37b by task insmod/2760

    CPU: 1 PID: 2760 Comm: insmod Not tainted 4.19.0-rc3+ #698
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
    Call Trace:
     dump_stack+0x94/0xd8
     print_address_description+0x73/0x280
     kasan_report+0x144/0x187
     __asan_report_store1_noabort+0x17/0x20
     kmalloc_oob_right+0xa8/0xbc [test_kasan]
     kmalloc_tests_init+0x16/0x700 [test_kasan]
     do_one_initcall+0xa5/0x3ae
     do_init_module+0x1b6/0x547
     load_module+0x75df/0x8070
     __do_sys_init_module+0x1c6/0x200
     __x64_sys_init_module+0x6e/0xb0
     do_syscall_64+0x9f/0x2c0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
    RIP: 0033:0x7f96443109da
    RSP: 002b:00007ffcf0b51b08 EFLAGS: 00000202 ORIG_RAX: 00000000000000af
    RAX: ffffffffffffffda RBX: 000055dc3ee521a0 RCX: 00007f96443109da
    RDX: 00007f96445cff88 RSI: 0000000000057a50 RDI: 00007f9644992000
    RBP: 000055dc3ee510b0 R08: 0000000000000003 R09: 0000000000000000
    R10: 00007f964430cd0a R11: 0000000000000202 R12: 00007f96445cff88
    R13: 000055dc3ee51090 R14: 0000000000000000 R15: 0000000000000000

    Allocated by task 2760:
     save_stack+0x43/0xd0
     kasan_kmalloc+0xa7/0xd0
     kmem_cache_alloc_trace+0xe1/0x1b0
     kmalloc_oob_right+0x56/0xbc [test_kasan]
     kmalloc_tests_init+0x16/0x700 [test_kasan]
     do_one_initcall+0xa5/0x3ae
     do_init_module+0x1b6/0x547
     load_module+0x75df/0x8070
     __do_sys_init_module+0x1c6/0x200
     __x64_sys_init_module+0x6e/0xb0
     do_syscall_64+0x9f/0x2c0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

    Freed by task 815:
     save_stack+0x43/0xd0
     __kasan_slab_free+0x135/0x190
     kasan_slab_free+0xe/0x10
     kfree+0x93/0x1a0
     umh_complete+0x6a/0xa0
     call_usermodehelper_exec_async+0x4c3/0x640
     ret_from_fork+0x35/0x40

    The buggy address belongs to the object at ffff8801f44ec300
     which belongs to the cache kmalloc-128 of size 128
    The buggy address is located 123 bytes inside of
     128-byte region [ffff8801f44ec300, ffff8801f44ec380)
    The buggy address belongs to the page:
    page:ffffea0007d13b00 count:1 mapcount:0 mapping:ffff8801f7001640 index:0x0
    flags: 0x200000000000100(slab)
    raw: 0200000000000100 ffffea0007d11dc0 0000001a0000001a ffff8801f7001640
    raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
    page dumped because: kasan: bad access detected

    Memory state around the buggy address:
     ffff8801f44ec200: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
     ffff8801f44ec280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
    >ffff8801f44ec300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03
                                                                    ^
     ffff8801f44ec380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
     ffff8801f44ec400: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
    ==================================================================

The report header summarizes what kind of bug happened and what kind of access
caused it. It is followed by a stack trace of the bad access, a stack trace of
where the accessed memory was allocated (in case a slab object was accessed),
and a stack trace of where the object was freed (in case of a use-after-free
bug report). Next comes a description of the accessed slab object and the
information about the accessed memory page.

In the end, the report shows the memory state around the accessed address.
Internally, KASAN tracks memory state separately for each memory granule, which
is either 8 or 16 aligned bytes depending on KASAN mode. Each number in the
memory state section of the report shows the state of one of the memory
granules that surround the accessed address.

For Generic KASAN, the size of each memory granule is 8. The state of each
granule is encoded in one shadow byte. Those 8 bytes can be accessible,
partially accessible, freed, or be a part of a redzone. KASAN uses the following
encoding for each shadow byte: 00 means that all 8 bytes of the corresponding
memory region are accessible; number N (1 <= N <= 7) means that the first N
bytes are accessible, and other (8 - N) bytes are not; any negative value
indicates that the entire 8-byte word is inaccessible. KASAN uses different
negative values to distinguish between different kinds of inaccessible memory
like redzones or freed memory (see mm/kasan/kasan.h).

In the report above, the arrow points to the shadow byte ``03``, which means
that the accessed address is partially accessible.

For tag-based KASAN modes, this last report section shows the memory tags around
the accessed address (see the `Implementation details`_ section).

Note that KASAN bug titles (like ``slab-out-of-bounds`` or ``use-after-free``)
are best-effort: KASAN prints the most probable bug type based on the limited
information it has. The actual type of the bug might be different.

Generic KASAN also reports up to two auxiliary call stack traces. These stack
traces point to places in code that interacted with the object but that are not
directly present in the bad access stack trace. Currently, this includes
call_rcu() and workqueue queuing.

Implementation details
----------------------

Generic KASAN
~~~~~~~~~~~~~

Software KASAN modes use shadow memory to record whether each byte of memory is
safe to access and use compile-time instrumentation to insert shadow memory
checks before each memory access.

Generic KASAN dedicates 1/8th of kernel memory to its shadow memory (16TB
to cover 128TB on x86_64) and uses direct mapping with a scale and offset to
translate a memory address to its corresponding shadow address.

Here is the function which translates an address to its corresponding shadow
address::

    static inline void *kasan_mem_to_shadow(const void *addr)
    {
	return (void *)((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
		+ KASAN_SHADOW_OFFSET;
    }

where ``KASAN_SHADOW_SCALE_SHIFT = 3``.

Compile-time instrumentation is used to insert memory access checks. Compiler
inserts function calls (``__asan_load*(addr)``, ``__asan_store*(addr)``) before
each memory access of size 1, 2, 4, 8, or 16. These functions check whether
memory accesses are valid or not by checking corresponding shadow memory.

With inline instrumentation, instead of making function calls, the compiler
directly inserts the code to check shadow memory. This option significantly
enlarges the kernel, but it gives an x1.1-x2 performance boost over the
outline-instrumented kernel.

Generic KASAN is the only mode that delays the reuse of freed objects via
quarantine (see mm/kasan/quarantine.c for implementation).

Software Tag-Based KASAN
~~~~~~~~~~~~~~~~~~~~~~~~

Software Tag-Based KASAN uses a software memory tagging approach to checking
access validity. It is currently only implemented for the arm64 architecture.

Software Tag-Based KASAN uses the Top Byte Ignore (TBI) feature of arm64 CPUs
to store a pointer tag in the top byte of kernel pointers. It uses shadow memory
to store memory tags associated with each 16-byte memory cell (therefore, it
dedicates 1/16th of the kernel memory for shadow memory).

On each memory allocation, Software Tag-Based KASAN generates a random tag, tags
the allocated memory with this tag, and embeds the same tag into the returned
pointer.

Software Tag-Based KASAN uses compile-time instrumentation to insert checks
before each memory access. These checks make sure that the tag of the memory
that is being accessed is equal to the tag of the pointer that is used to access
this memory. In case of a tag mismatch, Software Tag-Based KASAN prints a bug
report.

Software Tag-Based KASAN also has two instrumentation modes (outline, which
emits callbacks to check memory accesses; and inline, which performs the shadow
memory checks inline). With outline instrumentation mode, a bug report is
printed from the function that performs the access check. With inline
instrumentation, a ``brk`` instruction is emitted by the compiler, and a
dedicated ``brk`` handler is used to print bug reports.

Software Tag-Based KASAN uses 0xFF as a match-all pointer tag (accesses through
pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently
reserved to tag freed memory regions.

Hardware Tag-Based KASAN
~~~~~~~~~~~~~~~~~~~~~~~~

Hardware Tag-Based KASAN is similar to the software mode in concept but uses
hardware memory tagging support instead of compiler instrumentation and
shadow memory.

Hardware Tag-Based KASAN is currently only implemented for arm64 architecture
and based on both arm64 Memory Tagging Extension (MTE) introduced in ARMv8.5
Instruction Set Architecture and Top Byte Ignore (TBI).

Special arm64 instructions are used to assign memory tags for each allocation.
Same tags are assigned to pointers to those allocations. On every memory
access, hardware makes sure that the tag of the memory that is being accessed is
equal to the tag of the pointer that is used to access this memory. In case of a
tag mismatch, a fault is generated, and a report is printed.

Hardware Tag-Based KASAN uses 0xFF as a match-all pointer tag (accesses through
pointers with the 0xFF pointer tag are not checked). The value 0xFE is currently
reserved to tag freed memory regions.

If the hardware does not support MTE (pre ARMv8.5), Hardware Tag-Based KASAN
will not be enabled. In this case, all KASAN boot parameters are ignored.

Note that enabling CONFIG_KASAN_HW_TAGS always results in in-kernel TBI being
enabled. Even when ``kasan.mode=off`` is provided or when the hardware does not
support MTE (but supports TBI).

Hardware Tag-Based KASAN only reports the first found bug. After that, MTE tag
checking gets disabled.

Shadow memory
-------------

The contents of this section are only applicable to software KASAN modes.

The kernel maps memory in several different parts of the address space.
The range of kernel virtual addresses is large: there is not enough real
memory to support a real shadow region for every address that could be
accessed by the kernel. Therefore, KASAN only maps real shadow for certain
parts of the address space.

Default behaviour
~~~~~~~~~~~~~~~~~

By default, architectures only map real memory over the shadow region
for the linear mapping (and potentially other small areas). For all
other areas - such as vmalloc and vmemmap space - a single read-only
page is mapped over the shadow area. This read-only shadow page
declares all memory accesses as permitted.

This presents a problem for modules: they do not live in the linear
mapping but in a dedicated module space. By hooking into the module
allocator, KASAN temporarily maps real shadow memory to cover them.
This allows detection of invalid accesses to module globals, for example.

This also creates an incompatibility with ``VMAP_STACK``: if the stack
lives in vmalloc space, it will be shadowed by the read-only page, and
the kernel will fault when trying to set up the shadow data for stack
variables.

CONFIG_KASAN_VMALLOC
~~~~~~~~~~~~~~~~~~~~

With ``CONFIG_KASAN_VMALLOC``, KASAN can cover vmalloc space at the
cost of greater memory usage. Currently, this is supported on x86,
arm64, riscv, s390, and powerpc.

This works by hooking into vmalloc and vmap and dynamically
allocating real shadow memory to back the mappings.

Most mappings in vmalloc space are small, requiring less than a full
page of shadow space. Allocating a full shadow page per mapping would
therefore be wasteful. Furthermore, to ensure that different mappings
use different shadow pages, mappings would have to be aligned to
``KASAN_GRANULE_SIZE * PAGE_SIZE``.

Instead, KASAN shares backing space across multiple mappings. It allocates
a backing page when a mapping in vmalloc space uses a particular page
of the shadow region. This page can be shared by other vmalloc
mappings later on.

KASAN hooks into the vmap infrastructure to lazily clean up unused shadow
memory.

To avoid the difficulties around swapping mappings around, KASAN expects
that the part of the shadow region that covers the vmalloc space will
not be covered by the early shadow page but will be left unmapped.
This will require changes in arch-specific code.

This allows ``VMAP_STACK`` support on x86 and can simplify support of
architectures that do not have a fixed module region.

For developers
--------------

Ignoring accesses
~~~~~~~~~~~~~~~~~

Software KASAN modes use compiler instrumentation to insert validity checks.
Such instrumentation might be incompatible with some parts of the kernel, and
therefore needs to be disabled.

Other parts of the kernel might access metadata for allocated objects.
Normally, KASAN detects and reports such accesses, but in some cases (e.g.,
in memory allocators), these accesses are valid.

For software KASAN modes, to disable instrumentation for a specific file or
directory, add a ``KASAN_SANITIZE`` annotation to the respective kernel
Makefile:

- For a single file (e.g., main.o)::

    KASAN_SANITIZE_main.o := n

- For all files in one directory::

    KASAN_SANITIZE := n

For software KASAN modes, to disable instrumentation on a per-function basis,
use the KASAN-specific ``__no_sanitize_address`` function attribute or the
generic ``noinstr`` one.

Note that disabling compiler instrumentation (either on a per-file or a
per-function basis) makes KASAN ignore the accesses that happen directly in
that code for software KASAN modes. It does not help when the accesses happen
indirectly (through calls to instrumented functions) or with Hardware
Tag-Based KASAN, which does not use compiler instrumentation.

For software KASAN modes, to disable KASAN reports in a part of the kernel code
for the current task, annotate this part of the code with a
``kasan_disable_current()``/``kasan_enable_current()`` section. This also
disables the reports for indirect accesses that happen through function calls.

For tag-based KASAN modes, to disable access checking, use
``kasan_reset_tag()`` or ``page_kasan_tag_reset()``. Note that temporarily
disabling access checking via ``page_kasan_tag_reset()`` requires saving and
restoring the per-page KASAN tag via ``page_kasan_tag``/``page_kasan_tag_set``.

Tests
~~~~~

There are KASAN tests that allow verifying that KASAN works and can detect
certain types of memory corruptions. The tests consist of two parts:

1. Tests that are integrated with the KUnit Test Framework. Enabled with
``CONFIG_KASAN_KUNIT_TEST``. These tests can be run and partially verified
automatically in a few different ways; see the instructions below.

2. Tests that are currently incompatible with KUnit. Enabled with
``CONFIG_KASAN_MODULE_TEST`` and can only be run as a module. These tests can
only be verified manually by loading the kernel module and inspecting the
kernel log for KASAN reports.

Each KUnit-compatible KASAN test prints one of multiple KASAN reports if an
error is detected. Then the test prints its number and status.

When a test passes::

        ok 28 - kmalloc_double_kzfree

When a test fails due to a failed ``kmalloc``::

        # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
        Expected ptr is not null, but is
        not ok 4 - kmalloc_large_oob_right

When a test fails due to a missing KASAN report::

        # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:974
        KASAN failure expected in "kfree_sensitive(ptr)", but none occurred
        not ok 44 - kmalloc_double_kzfree


At the end the cumulative status of all KASAN tests is printed. On success::

        ok 1 - kasan

Or, if one of the tests failed::

        not ok 1 - kasan

There are a few ways to run KUnit-compatible KASAN tests.

1. Loadable module

   With ``CONFIG_KUNIT`` enabled, KASAN-KUnit tests can be built as a loadable
   module and run by loading ``test_kasan.ko`` with ``insmod`` or ``modprobe``.

2. Built-In

   With ``CONFIG_KUNIT`` built-in, KASAN-KUnit tests can be built-in as well.
   In this case, the tests will run at boot as a late-init call.

3. Using kunit_tool

   With ``CONFIG_KUNIT`` and ``CONFIG_KASAN_KUNIT_TEST`` built-in, it is also
   possible to use ``kunit_tool`` to see the results of KUnit tests in a more
   readable way. This will not print the KASAN reports of the tests that passed.
   See `KUnit documentation <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_
   for more up-to-date information on ``kunit_tool``.

.. _KUnit: https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html