| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * CAIF USB handler |
| * Copyright (C) ST-Ericsson AB 2011 |
| * Author: Sjur Brendeland |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ":%s(): " fmt, __func__ |
| |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/slab.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/usb/usbnet.h> |
| #include <linux/etherdevice.h> |
| #include <net/netns/generic.h> |
| #include <net/caif/caif_dev.h> |
| #include <net/caif/caif_layer.h> |
| #include <net/caif/cfpkt.h> |
| #include <net/caif/cfcnfg.h> |
| |
| MODULE_LICENSE("GPL"); |
| |
| #define CFUSB_PAD_DESCR_SZ 1 /* Alignment descriptor length */ |
| #define CFUSB_ALIGNMENT 4 /* Number of bytes to align. */ |
| #define CFUSB_MAX_HEADLEN (CFUSB_PAD_DESCR_SZ + CFUSB_ALIGNMENT-1) |
| #define STE_USB_VID 0x04cc /* USB Product ID for ST-Ericsson */ |
| #define STE_USB_PID_CAIF 0x230f /* Product id for CAIF Modems */ |
| |
| struct cfusbl { |
| struct cflayer layer; |
| u8 tx_eth_hdr[ETH_HLEN]; |
| }; |
| |
| static bool pack_added; |
| |
| static int cfusbl_receive(struct cflayer *layr, struct cfpkt *pkt) |
| { |
| u8 hpad; |
| |
| /* Remove padding. */ |
| cfpkt_extr_head(pkt, &hpad, 1); |
| cfpkt_extr_head(pkt, NULL, hpad); |
| return layr->up->receive(layr->up, pkt); |
| } |
| |
| static int cfusbl_transmit(struct cflayer *layr, struct cfpkt *pkt) |
| { |
| struct caif_payload_info *info; |
| u8 hpad; |
| u8 zeros[CFUSB_ALIGNMENT]; |
| struct sk_buff *skb; |
| struct cfusbl *usbl = container_of(layr, struct cfusbl, layer); |
| |
| skb = cfpkt_tonative(pkt); |
| |
| skb_reset_network_header(skb); |
| skb->protocol = htons(ETH_P_IP); |
| |
| info = cfpkt_info(pkt); |
| hpad = (info->hdr_len + CFUSB_PAD_DESCR_SZ) & (CFUSB_ALIGNMENT - 1); |
| |
| if (skb_headroom(skb) < ETH_HLEN + CFUSB_PAD_DESCR_SZ + hpad) { |
| pr_warn("Headroom too small\n"); |
| kfree_skb(skb); |
| return -EIO; |
| } |
| memset(zeros, 0, hpad); |
| |
| cfpkt_add_head(pkt, zeros, hpad); |
| cfpkt_add_head(pkt, &hpad, 1); |
| cfpkt_add_head(pkt, usbl->tx_eth_hdr, sizeof(usbl->tx_eth_hdr)); |
| return layr->dn->transmit(layr->dn, pkt); |
| } |
| |
| static void cfusbl_ctrlcmd(struct cflayer *layr, enum caif_ctrlcmd ctrl, |
| int phyid) |
| { |
| if (layr->up && layr->up->ctrlcmd) |
| layr->up->ctrlcmd(layr->up, ctrl, layr->id); |
| } |
| |
| static struct cflayer *cfusbl_create(int phyid, const u8 ethaddr[ETH_ALEN], |
| u8 braddr[ETH_ALEN]) |
| { |
| struct cfusbl *this = kmalloc(sizeof(struct cfusbl), GFP_ATOMIC); |
| |
| if (!this) |
| return NULL; |
| |
| caif_assert(offsetof(struct cfusbl, layer) == 0); |
| |
| memset(&this->layer, 0, sizeof(this->layer)); |
| this->layer.receive = cfusbl_receive; |
| this->layer.transmit = cfusbl_transmit; |
| this->layer.ctrlcmd = cfusbl_ctrlcmd; |
| snprintf(this->layer.name, CAIF_LAYER_NAME_SZ, "usb%d", phyid); |
| this->layer.id = phyid; |
| |
| /* |
| * Construct TX ethernet header: |
| * 0-5 destination address |
| * 5-11 source address |
| * 12-13 protocol type |
| */ |
| ether_addr_copy(&this->tx_eth_hdr[ETH_ALEN], braddr); |
| ether_addr_copy(&this->tx_eth_hdr[ETH_ALEN], ethaddr); |
| this->tx_eth_hdr[12] = cpu_to_be16(ETH_P_802_EX1) & 0xff; |
| this->tx_eth_hdr[13] = (cpu_to_be16(ETH_P_802_EX1) >> 8) & 0xff; |
| pr_debug("caif ethernet TX-header dst:%pM src:%pM type:%02x%02x\n", |
| this->tx_eth_hdr, this->tx_eth_hdr + ETH_ALEN, |
| this->tx_eth_hdr[12], this->tx_eth_hdr[13]); |
| |
| return (struct cflayer *) this; |
| } |
| |
| static void cfusbl_release(struct cflayer *layer) |
| { |
| kfree(layer); |
| } |
| |
| static struct packet_type caif_usb_type __read_mostly = { |
| .type = cpu_to_be16(ETH_P_802_EX1), |
| }; |
| |
| static int cfusbl_device_notify(struct notifier_block *me, unsigned long what, |
| void *ptr) |
| { |
| struct net_device *dev = netdev_notifier_info_to_dev(ptr); |
| struct caif_dev_common common; |
| struct cflayer *layer, *link_support; |
| struct usbnet *usbnet; |
| struct usb_device *usbdev; |
| int res; |
| |
| if (what == NETDEV_UNREGISTER && dev->reg_state >= NETREG_UNREGISTERED) |
| return 0; |
| |
| /* Check whether we have a NCM device, and find its VID/PID. */ |
| if (!(dev->dev.parent && dev->dev.parent->driver && |
| strcmp(dev->dev.parent->driver->name, "cdc_ncm") == 0)) |
| return 0; |
| |
| usbnet = netdev_priv(dev); |
| usbdev = usbnet->udev; |
| |
| pr_debug("USB CDC NCM device VID:0x%4x PID:0x%4x\n", |
| le16_to_cpu(usbdev->descriptor.idVendor), |
| le16_to_cpu(usbdev->descriptor.idProduct)); |
| |
| /* Check for VID/PID that supports CAIF */ |
| if (!(le16_to_cpu(usbdev->descriptor.idVendor) == STE_USB_VID && |
| le16_to_cpu(usbdev->descriptor.idProduct) == STE_USB_PID_CAIF)) |
| return 0; |
| |
| if (what == NETDEV_UNREGISTER) |
| module_put(THIS_MODULE); |
| |
| if (what != NETDEV_REGISTER) |
| return 0; |
| |
| __module_get(THIS_MODULE); |
| |
| memset(&common, 0, sizeof(common)); |
| common.use_frag = false; |
| common.use_fcs = false; |
| common.use_stx = false; |
| common.link_select = CAIF_LINK_HIGH_BANDW; |
| common.flowctrl = NULL; |
| |
| link_support = cfusbl_create(dev->ifindex, dev->dev_addr, |
| dev->broadcast); |
| |
| if (!link_support) |
| return -ENOMEM; |
| |
| if (dev->num_tx_queues > 1) |
| pr_warn("USB device uses more than one tx queue\n"); |
| |
| res = caif_enroll_dev(dev, &common, link_support, CFUSB_MAX_HEADLEN, |
| &layer, &caif_usb_type.func); |
| if (res) |
| goto err; |
| |
| if (!pack_added) |
| dev_add_pack(&caif_usb_type); |
| pack_added = true; |
| |
| strscpy(layer->name, dev->name, sizeof(layer->name)); |
| |
| return 0; |
| err: |
| cfusbl_release(link_support); |
| return res; |
| } |
| |
| static struct notifier_block caif_device_notifier = { |
| .notifier_call = cfusbl_device_notify, |
| .priority = 0, |
| }; |
| |
| static int __init cfusbl_init(void) |
| { |
| return register_netdevice_notifier(&caif_device_notifier); |
| } |
| |
| static void __exit cfusbl_exit(void) |
| { |
| unregister_netdevice_notifier(&caif_device_notifier); |
| dev_remove_pack(&caif_usb_type); |
| } |
| |
| module_init(cfusbl_init); |
| module_exit(cfusbl_exit); |