blob: 2da5b60b59e29a82d291ccb8c2a517f8c8055fab [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
//
// Copyright (C) 2012 Samsung Electronics.
// Kyungmin Park <kyungmin.park@samsung.com>
// Tomasz Figa <t.figa@samsung.com>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/firmware.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/suspend.h>
#include "common.h"
#include "smc.h"
#define EXYNOS_BOOT_ADDR 0x8
#define EXYNOS_BOOT_FLAG 0xc
static void exynos_save_cp15(void)
{
/* Save Power control and Diagnostic registers */
asm ("mrc p15, 0, %0, c15, c0, 0\n"
"mrc p15, 0, %1, c15, c0, 1\n"
: "=r" (cp15_save_power), "=r" (cp15_save_diag)
: : "cc");
}
static int exynos_do_idle(unsigned long mode)
{
switch (mode) {
case FW_DO_IDLE_AFTR:
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
writel_relaxed(__pa_symbol(exynos_cpu_resume_ns),
sysram_ns_base_addr + 0x24);
writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
if (soc_is_exynos3250()) {
flush_cache_all();
exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
SMC_POWERSTATE_IDLE, 0);
exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER,
SMC_POWERSTATE_IDLE, 0);
} else
exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
break;
case FW_DO_IDLE_SLEEP:
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
}
return 0;
}
static int exynos_cpu_boot(int cpu)
{
/*
* Exynos3250 doesn't need to send smc command for secondary CPU boot
* because Exynos3250 removes WFE in secure mode.
*
* On Exynos5 devices the call is ignored by trustzone firmware.
*/
if (!soc_is_exynos4210() && !soc_is_exynos4412())
return 0;
/*
* The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
*/
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
void __iomem *boot_reg;
if (!sysram_ns_base_addr)
return -ENODEV;
boot_reg = sysram_ns_base_addr + 0x1c;
/*
* Almost all Exynos-series of SoCs that run in secure mode don't need
* additional offset for every CPU, with Exynos4412 being the only
* exception.
*/
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
writel_relaxed(boot_addr, boot_reg);
return 0;
}
static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
{
void __iomem *boot_reg;
if (!sysram_ns_base_addr)
return -ENODEV;
boot_reg = sysram_ns_base_addr + 0x1c;
if (soc_is_exynos4412())
boot_reg += 4 * cpu;
*boot_addr = readl_relaxed(boot_reg);
return 0;
}
static int exynos_cpu_suspend(unsigned long arg)
{
flush_cache_all();
outer_flush_all();
exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
pr_info("Failed to suspend the system\n");
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
return 1;
}
static int exynos_suspend(void)
{
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
exynos_save_cp15();
writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
writel(__pa_symbol(exynos_cpu_resume_ns),
sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
return cpu_suspend(0, exynos_cpu_suspend);
}
static int exynos_resume(void)
{
writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
return 0;
}
static const struct firmware_ops exynos_firmware_ops = {
.do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
.get_cpu_boot_addr = exynos_get_cpu_boot_addr,
.cpu_boot = exynos_cpu_boot,
.suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
.resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
};
static void exynos_l2_write_sec(unsigned long val, unsigned reg)
{
static int l2cache_enabled;
switch (reg) {
case L2X0_CTRL:
if (val & L2X0_CTRL_EN) {
/*
* Before the cache can be enabled, due to firmware
* design, SMC_CMD_L2X0INVALL must be called.
*/
if (!l2cache_enabled) {
exynos_smc(SMC_CMD_L2X0INVALL, 0, 0, 0);
l2cache_enabled = 1;
}
} else {
l2cache_enabled = 0;
}
exynos_smc(SMC_CMD_L2X0CTRL, val, 0, 0);
break;
case L2X0_DEBUG_CTRL:
exynos_smc(SMC_CMD_L2X0DEBUG, val, 0, 0);
break;
default:
WARN_ONCE(1, "%s: ignoring write to reg 0x%x\n", __func__, reg);
}
}
static void exynos_l2_configure(const struct l2x0_regs *regs)
{
exynos_smc(SMC_CMD_L2X0SETUP1, regs->tag_latency, regs->data_latency,
regs->prefetch_ctrl);
exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
}
bool __init exynos_secure_firmware_available(void)
{
struct device_node *nd;
const __be32 *addr;
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
return false;
addr = of_get_address(nd, 0, NULL, NULL);
of_node_put(nd);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
return false;
}
return true;
}
void __init exynos_firmware_init(void)
{
if (!exynos_secure_firmware_available())
return;
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
/*
* Exynos 4 SoCs (based on Cortex A9 and equipped with L2C-310),
* running under secure firmware, require certain registers of L2
* cache controller to be written in secure mode. Here .write_sec
* callback is provided to perform necessary SMC calls.
*/
if (IS_ENABLED(CONFIG_CACHE_L2X0) &&
read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
outer_cache.write_sec = exynos_l2_write_sec;
outer_cache.configure = exynos_l2_configure;
}
}
#define REG_CPU_STATE_ADDR (sysram_ns_base_addr + 0x28)
#define BOOT_MODE_MASK 0x1f
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
{
unsigned int tmp;
tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
if (mode & BOOT_MODE_MASK)
tmp &= ~BOOT_MODE_MASK;
tmp |= mode;
writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
}
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
{
unsigned int tmp;
tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
tmp &= ~mode;
writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
}