| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Copyright (C) 2011 Marvell International Ltd. All rights reserved. |
| */ |
| |
| #ifndef __ASM_ARCH_REGS_USB_H |
| #define __ASM_ARCH_REGS_USB_H |
| |
| #define PXA168_U2O_REGBASE (0xd4208000) |
| #define PXA168_U2O_PHYBASE (0xd4207000) |
| |
| #define PXA168_U2H_REGBASE (0xd4209000) |
| #define PXA168_U2H_PHYBASE (0xd4206000) |
| |
| #define MMP3_HSIC1_REGBASE (0xf0001000) |
| #define MMP3_HSIC1_PHYBASE (0xf0001800) |
| |
| #define MMP3_HSIC2_REGBASE (0xf0002000) |
| #define MMP3_HSIC2_PHYBASE (0xf0002800) |
| |
| #define MMP3_FSIC_REGBASE (0xf0003000) |
| #define MMP3_FSIC_PHYBASE (0xf0003800) |
| |
| |
| #define USB_REG_RANGE (0x1ff) |
| #define USB_PHY_RANGE (0xff) |
| |
| /* registers */ |
| #define U2x_CAPREGS_OFFSET 0x100 |
| |
| /* phy regs */ |
| #define UTMI_REVISION 0x0 |
| #define UTMI_CTRL 0x4 |
| #define UTMI_PLL 0x8 |
| #define UTMI_TX 0xc |
| #define UTMI_RX 0x10 |
| #define UTMI_IVREF 0x14 |
| #define UTMI_T0 0x18 |
| #define UTMI_T1 0x1c |
| #define UTMI_T2 0x20 |
| #define UTMI_T3 0x24 |
| #define UTMI_T4 0x28 |
| #define UTMI_T5 0x2c |
| #define UTMI_RESERVE 0x30 |
| #define UTMI_USB_INT 0x34 |
| #define UTMI_DBG_CTL 0x38 |
| #define UTMI_OTG_ADDON 0x3c |
| |
| /* For UTMICTRL Register */ |
| #define UTMI_CTRL_USB_CLK_EN (1 << 31) |
| /* pxa168 */ |
| #define UTMI_CTRL_SUSPEND_SET1 (1 << 30) |
| #define UTMI_CTRL_SUSPEND_SET2 (1 << 29) |
| #define UTMI_CTRL_RXBUF_PDWN (1 << 24) |
| #define UTMI_CTRL_TXBUF_PDWN (1 << 11) |
| |
| #define UTMI_CTRL_INPKT_DELAY_SHIFT 30 |
| #define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 |
| #define UTMI_CTRL_PU_REF_SHIFT 20 |
| #define UTMI_CTRL_ARC_PULLDN_SHIFT 12 |
| #define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 |
| #define UTMI_CTRL_PWR_UP_SHIFT 0 |
| |
| /* For UTMI_PLL Register */ |
| #define UTMI_PLL_PLLCALI12_SHIFT 29 |
| #define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) |
| |
| #define UTMI_PLL_PLLVDD18_SHIFT 27 |
| #define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) |
| |
| #define UTMI_PLL_PLLVDD12_SHIFT 25 |
| #define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) |
| |
| #define UTMI_PLL_CLK_BLK_EN_SHIFT 24 |
| #define CLK_BLK_EN (0x1 << 24) |
| #define PLL_READY (0x1 << 23) |
| #define KVCO_EXT (0x1 << 22) |
| #define VCOCAL_START (0x1 << 21) |
| |
| #define UTMI_PLL_KVCO_SHIFT 15 |
| #define UTMI_PLL_KVCO_MASK (0x7 << 15) |
| |
| #define UTMI_PLL_ICP_SHIFT 12 |
| #define UTMI_PLL_ICP_MASK (0x7 << 12) |
| |
| #define UTMI_PLL_FBDIV_SHIFT 4 |
| #define UTMI_PLL_FBDIV_MASK (0xFF << 4) |
| |
| #define UTMI_PLL_REFDIV_SHIFT 0 |
| #define UTMI_PLL_REFDIV_MASK (0xF << 0) |
| |
| /* For UTMI_TX Register */ |
| #define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 |
| #define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) |
| |
| #define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26 |
| #define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26) |
| |
| #define UTMI_TX_TXVDD12_SHIFT 22 |
| #define UTMI_TX_TXVDD12_MASK (0x3 << 22) |
| |
| #define UTMI_TX_CK60_PHSEL_SHIFT 17 |
| #define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) |
| |
| #define UTMI_TX_IMPCAL_VTH_SHIFT 14 |
| #define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) |
| |
| #define REG_RCAL_START (0x1 << 12) |
| |
| #define UTMI_TX_LOW_VDD_EN_SHIFT 11 |
| |
| #define UTMI_TX_AMP_SHIFT 0 |
| #define UTMI_TX_AMP_MASK (0x7 << 0) |
| |
| /* For UTMI_RX Register */ |
| #define UTMI_REG_SQ_LENGTH_SHIFT 15 |
| #define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) |
| |
| #define UTMI_RX_SQ_THRESH_SHIFT 4 |
| #define UTMI_RX_SQ_THRESH_MASK (0xf << 4) |
| |
| #define UTMI_OTG_ADDON_OTG_ON (1 << 0) |
| |
| /* fsic registers */ |
| #define FSIC_MISC 0x4 |
| #define FSIC_INT 0x28 |
| #define FSIC_CTRL 0x30 |
| |
| /* HSIC registers */ |
| #define HSIC_PAD_CTRL 0x4 |
| |
| #define HSIC_CTRL 0x8 |
| #define HSIC_CTRL_HSIC_ENABLE (1<<7) |
| #define HSIC_CTRL_PLL_BYPASS (1<<4) |
| |
| #define TEST_GRP_0 0xc |
| #define TEST_GRP_1 0x10 |
| |
| #define HSIC_INT 0x14 |
| #define HSIC_INT_READY_INT_EN (1<<10) |
| #define HSIC_INT_CONNECT_INT_EN (1<<9) |
| #define HSIC_INT_CORE_INT_EN (1<<8) |
| #define HSIC_INT_HS_READY (1<<2) |
| #define HSIC_INT_CONNECT (1<<1) |
| #define HSIC_INT_CORE (1<<0) |
| |
| #define HSIC_CONFIG 0x18 |
| #define USBHSIC_CTRL 0x20 |
| |
| #define HSIC_USB_CTRL 0x28 |
| #define HSIC_USB_CTRL_CLKEN 1 |
| #define HSIC_USB_CLK_PHY 0x0 |
| #define HSIC_USB_CLK_PMU 0x1 |
| |
| #endif /* __ASM_ARCH_PXA_U2O_H */ |
